{"title":"Kegland","description":"","products":[{"product_id":"refractometer-0-to-32-brix-scale-wort-sg-1-000-1-120","title":"Portable Refractometer ATC (Three Scale) Brix - SG Sugar - SG Wort","description":"\u003cp\u003eA refractometer is used to test sugar concentrations in a solution. When light passes through a liquid it bends at an angle. Depending on the density of the liquid, this angle becomes more or less pronounced. Refractometers work using this property and translate this shifted angle of refracted light to fall on a graduated Brix chart that is viewable in the eyepiece. \u003c\/p\u003e\n\u003cp\u003eWhen brewing a refractometer allows you to take instant gravity measurements during mash, run-off, or during the boil. A valuable tool for all grain and extract brewers alike.\u003c\/p\u003e\n\u003cp\u003eAs the density of wort is not the same as a sugar water solution you may wish to calibrate your refractometer when measuring wort. Click \u003ca href=\"https:\/\/www.brewersfriend.com\/how-to-determine-your-refractometers-wort-correction-factor\/\" title=\"Brewers Friend Wort Correction Factor\" target=\"_blank\"\u003ehere\u003c\/a\u003e for more information on how to do this.\u003c\/p\u003e\n\u003cp\u003eWhen making wine a refractometer makes it very easy to measure the sugar levels at the crush or of your must.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsing a Refractometer:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eTo use, apply 2-3 drops to the prism face, close the cover and wait 30 seconds. Look through the eye-piece - the line on the screen will show the Brix % and Specific Gravity reading.\u003c\/p\u003e\n\u003cp\u003eCalibrate the unit to 0.0 Brix before use with distilled water.\u003c\/p\u003e\n\u003cp\u003eThis model comes with ATC (Automatic Temperature Compensation) allowing you to use the refractometer between 10 \/ 30 degrees Celsius so the temperature of the sample is irrelevant. \u003c\/p\u003e\n\u003cp\u003eComes with:\u003cbr\u003e- Carry case\u003cbr\u003e- Pipette\u003cbr\u003e- Calibration Screw Driver\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: This tool is used to measure unfermented wort. Once alcohol is present in the wort, the use of a correction table is advised.\u003c\/strong\u003e  \u003cstrong\u003eIt is possible to use a \u003ca href=\"https:\/\/www.brewersfriend.com\/refractometer-calculator\/\" target=\"_blank\"\u003ecalculator\u003c\/a\u003e to convert the reading, however it may not be as accurate as a hydrometer reading.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":7159087792188,"sku":"KL03759","price":49.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Portable_Refractometer_ATC_Three_Scale_Brix_-_SG_Sugar_-_SG_Wort_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-260629.jpg?v=1717066504"},{"product_id":"heating-belt-30w","title":"Heater Belt - 30w","description":"\u003cp\u003eA brewing heater belt that fits around your fermenter to provide steady and constant warmth for your brew. The 30 watts will gently warm without creating a hot spot, and can be moved up or down the fermenter to increase or decrease the heat transfer to the brew.\u003c\/p\u003e\n\u003cp\u003eTo further control the temperature of your fermentation, combine with a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/allthingsfermented.nz\/products\/rapt-temperature-controller\"\u003eRAPT Temperature Controller\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor similar to regulate the heater belt automatically.\u003c\/p\u003e\n\u003cp\u003eNote: fermenter not included.\u003c\/p\u003e\n\u003cp\u003eFrom: Kegland\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":8881357422652,"sku":"KL01953","price":29.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Heater_Belt_-_30w_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-255603.png?v=1717062338"},{"product_id":"copper-immersion-chiller","title":"Copper Immersion Chiller","description":"\u003cp class=\"product-images\"\u003e\u003cspan\u003eA copper immersion chiller is a great piece of equipment for all-grain and extract brewers to cool the wort at the end of the boil. It is immersed into the boiling wort at least 10 minutes before the end of the boil (this will help to sanitise the chiller, although it should be clean before being used) and attached to a cold water source.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"product-images\"\u003e\u003cspan\u003eWhen ready to cool the wort, turn on the cold water and it will flow through the immersion chiller and cool the wort. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"product-images\"\u003e\u003cspan\u003eTo increase the rate at which the wort cools you can stir the wort to create a whirlpool. This will cause more of the wort to come into contact with the chiller and cool the wort faster. Make sure to sanitise whatever you use to stir the wort.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"product-images\"\u003eYou could also use a pump (such as the \u003ca href=\"https:\/\/allthingsfermented.nz\/collections\/brewing-equipment\/products\/mkii-25w-high-temp-magnetic-pump\" title=\"MKII 25w High Temp Magnetic Pump\" target=\"_blank\"\u003eMKII 25w High Temp Magnetic Pump\u003c\/a\u003e) to create a whirlpool immersion chiller; made popular by award winning American home brewer Jamil Zainasheff. \u003ca href=\"http:\/\/www.mrmalty.com\/chiller.php\" target=\"_blank\"\u003eHere\u003c\/a\u003e is a link to Jamil's site, Mr Malty, with more details.\u003c\/p\u003e\n\u003cp class=\"product-images\"\u003e\u003cspan\u003eAn immersion chiller can also be used to pre-chill the cooling water. Just submerge the immersion chiller in an ice bath to to pre-chill the water that ultimately flows into another immersion chiller in the wort\u003c\/span\u003e\u003cspan\u003e. This can be particularly helpful during summer when the groundwater temperature increases.\u003c\/span\u003e\u003c\/p\u003e\n\u003csection class=\"product-description\"\u003e\n\u003cp\u003eThis chiller comes complete with a garden hose fitting on one end to connect to your garden or kitchen tap, and clear vinyl tubing.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eCopper Diameter: 3\/8\"\u003cbr\u003eCopper Length: 25 feet (around 7.5m)\u003cbr\u003eOutside diameter of coil: approx. 250mm\u003cbr\u003eFrom: Krome Dispense\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":8882114920508,"sku":"","price":99.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Copper_Immersion_Chiller_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-252896.jpg?v=1717059712"},{"product_id":"stainless-steel-mash-paddle-1","title":"Stainless Steel Mash Paddle","description":"\u003cp\u003e\u003cspan\u003eA quality mash paddle is an essential piece of equipment for all-grain brewers. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis high quality stainless steel mash paddle is approximately 61cm long and will make stirring the mash and avoiding dough balls a much simpler task. Avoiding the formation of dough balls during the mash is important to ensure the full extract potential of the mash is achieved. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe paddle is also perfect for all other stirring duties and may even be used to knock down the hot break at the beginning of the boil.\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":8893857759292,"sku":"KL03810","price":24.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Stainless_Steel_Mash_Paddle_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-262895.jpg?v=1717068289"},{"product_id":"bench-capper","title":"Bench Capper","description":"\u003cp\u003eOur standard bench capper provides an easy way to cap your beer bottles.\u003c\/p\u003e\n\u003cp\u003eIt is made from steel and with rubber grip pad so your bottles don't slip off the platform\u003c\/p\u003e\n\u003cp\u003eThis bottle capper can be used on different size bottles as the height of the bell can be adjusted, and it can be bolted to sturdy surface.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003e- Easy to use and adjust to required heights depending on bottle size\u003cbr\u003e- Comes with a standard bell which has a built in magnet to hold the bottle cap\u003cbr\u003e- Simply place bottle caps in the bell then place the bottle underneath and pull the handle down\u003c\/p\u003e\n\u003cp\u003eThe capper is shipped flat-packed and needs assembling before use.\u003c\/p\u003e\n\u003cp\u003eFrom: Kegland\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":8894157553724,"sku":"KL05340","price":49.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Bench_Capper_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-251043.png?v=1717057965"},{"product_id":"liquid-ball-lock-post-for-keg-coupler","title":"Gas Ball Lock Post for Keg Coupler","description":"\u003cp\u003e\u003cspan\u003eThe Gas Ball Lock Post for Keg Coupler is a liquid ball lock post with a female 5\/8 inch connection. It allows you to connect ball lock disconnects to a keg coupler making it extremely easy to swap over from a corney keg to a commercial keg (you will need the correct coupler for the keg as well). \u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":8898405761084,"sku":"KL00833","price":19.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Gas_Ball_Lock_Post_for_Keg_Coupler_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-254383.jpg?v=1717061118"},{"product_id":"liquid-ball-lock-post-for-keg-coupler-1","title":"Liquid Ball Lock Post for Keg Coupler","description":"\u003cp\u003e\u003cspan\u003eThe Liquid Ball Lock Post for Keg Coupler is a liquid ball lock post with a female 5\/8 inch connection. It allows you to connect ball lock disconnects to a keg coupler making it extremely easy to swap over from a corney keg to a commercial keg (you will need the correct coupler for the keg as well). \u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":8898612035644,"sku":"KL00840","price":19.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Liquid_Ball_Lock_Post_for_Keg_Coupler_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-256710.jpg?v=1717063356"},{"product_id":"stainless-steel-barbed-t-fitting","title":"Stainless Steel Barbed T Piece","description":"\u003cp\u003e\u003cspan\u003eThis hose fitting is made of stainless steel and connects three lengths of hose in a branch tee. The barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp such as a stepless clamp. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eBore sizes usually available:\u003cbr\u003e- 6.35mm (1\/4\")\u003cbr\u003e- 4.76mm (3\/16\")\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"1\/4 inch","offer_id":31337496903814,"sku":"","price":6.95,"currency_code":"NZD","in_stock":false},{"title":"3\/16 inch","offer_id":31337496936582,"sku":"","price":6.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Stainless_Steel_Barbed_T_Piece_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-262867.jpg?v=1717068266"},{"product_id":"mkii-temperature-controller","title":"MKII Temperature Controller","description":"\u003cspan\u003eThe MKII Temperature Controller is a programmable, dual stage controller to manage your heating and cooling equipment. Either set and forget, or use the temperature profile feature to schedule temperature shifts between ferment, diacetyl rest, cold crash, and other fermentation temperature stages.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eHigh accuracy 0.1 degree C. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDual plugs so you can control heating and cooling devices with the one controller \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2 x 10amp sockets on rear; one for heating and one for cooling \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWorks from -45C up to 120C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eComes with fully waterproof probe so you can immerse the probe in water\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUses “50k ohm” Probe\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eManufactured in compliance with Australian Standards\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan\u003eDownload the instruction manual \u003c\/span\u003e\u003ca href=\"https:\/\/www.kegland.com.au\/media\/pdf\/MKII%20Temperature%20Controller%20Instructions.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNOTE: If you want to do a factory reset to the default settings please hold the up and down arrow down for 6 seconds.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":8900609605692,"sku":"","price":99.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/MKII_Temperature_Controller_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-259212.jpg?v=1717065367"},{"product_id":"beer-mfl-ball-lock-disconnect","title":"Ball Lock Beer MFL Disconnect","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBeer (black) connector with MFL thread for ball lock corny kegs.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis is a premium plastic ball lock connector designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the disconnect.\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9020233678908,"sku":"KL02974","price":9.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Ball_Lock_Beer_MFL_Disconnect_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-250398.jpg?v=1717057331"},{"product_id":"gas-mfl-ball-lock-disconnect","title":"Ball Lock Gas MFL Disconnect","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eGas (grey or white) connector with MFL thread for ball lock corny kegs.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis is a premium plastic ball lock connector designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the disconnect.\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9020252160060,"sku":"KL02967","price":9.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Ball_Lock_Gas_MFL_Disconnect_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-250535.jpg?v=1717057478"},{"product_id":"beerbarbed-ball-lock-disconnect","title":"Ball Lock Beer Barbed Disconnect","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBeer (black) connector with barb for ball lock corny kegs.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis is a premium plastic ball lock connector designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the disconnect.\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9020266545212,"sku":"KL02950","price":9.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Ball_Lock_Beer_Barbed_Disconnect_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-250259.jpg?v=1717057191"},{"product_id":"picnic-tap","title":"Beer Tap - Picnic Tap","description":"\u003cp\u003eAn excellent and economical way to be able to dispense beer from a keg when it isn't connected to your main kegging system. \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis simple to use plastic beer tap has a 6mm barb which will ideally suit 5mm ID beer line\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9233802788924,"sku":"","price":6.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Beer_Tap_-_Picnic_Tap_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-250920.jpg?v=1717057835"},{"product_id":"nukatap-intertap-growler-filler-spout","title":"Nukatap \/ Intertap Growler Filler Spout","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Growler Filler Spout extension can be used on any of the Nukatap \/ Intertap beer taps. The spout has a 13mm barb to which you can attach some hose so you can fill your growler from the bottom up to minimise foaming. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSimply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis product only fits Nukatap \/ Intertap taps.\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9233993367612,"sku":"","price":8.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Intertap_Growler_Filler_Spout_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-259740.jpg?v=1717065780"},{"product_id":"nukatap-intertap-liquid-ball-lock-spout","title":"Nukatap \/ Intertap Liquid Ball Lock Spout","description":"\u003cp\u003e\u003cspan\u003eThis is a handy Intertap spout accessory that can be used for a large range of purposes, including attaching a counter pressure filler gun. This makes keg to keg transfers or cleaning out your beer lines easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSimply un-screw the regular nozzle and screw on the Liquid Ball Lock Post.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis product only fits Nukatap \/ Intertap taps.\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9234018598972,"sku":"KL01052","price":14.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Intertap_Liquid_Ball_Lock_Spout_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-259745.jpg?v=1717065784"},{"product_id":"nukatap-intertap-stout-spout","title":"Nukatap \/ Intertap Stout Spout","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Stout Spout extension can be used on any of the Nukatap \/ Intertap beer taps. It has a removable creamer\/aerator disc inside that is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSimply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Stainless Steel","offer_id":40047427518598,"sku":"KL01021","price":14.95,"currency_code":"NZD","in_stock":true},{"title":"Black","offer_id":40047427551366,"sku":"","price":14.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Intertap_Stout_Spout_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-259760.jpg?v=1717065796"},{"product_id":"brewing-hydrometer","title":"Hydrometer","description":"\u003cp\u003e\u003cspan\u003eA hydrometer is an essential tool for testing starting and finishing gravity, or sugar content, in beer or wine or spirit fermentations. This is a triple scale hydrometer - specific gravity, potential alcohol and approx. sugar per litre.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBest used with a trial jar (sold separately).\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9234083053628,"sku":"KL04312","price":13.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Hydrometer_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-255712.jpg?v=1717062444"},{"product_id":"the-ultimate-beer-growler","title":"The Ultimate Beer Growler","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Ultimate Growler is made from 304 Stainless Steel that is completely impervious to oxygen and sunlight (UV) meaning your precious liquid is in the absolute best storage container possible.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Growler also comes with double wall vacuum insulation helping to keep your beer cold for hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is the new improved MK2 model with new lid design. This new MK2 model is more robust and more reliable than the previous growler design.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMost screw top growlers struggle to hold the pressure required to keep beer fresh and carbonated. The Ultimate Growler comes with a spring wired lid capable of holding up to 40psi.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also turn your Ultimate Growler into a mini keg with the:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/allthingsfermented.nz\/products\/beer-growler-draft-kit-mini-tapping-head\" title=\"Beer Growler Draft Kit\"\u003eBeer Growler Draft Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/allthingsfermented.nz\/products\/mini-co2-regulator-mangrove-jacks-portable-co2-kit\" title=\"Mini CO2 Regulator - Mangrove Jack's Portable CO2 Kit\"\u003eMini CO2 Regulator - Mangrove Jack's Portable CO2 Kit\u003c\/a\u003e or \u003ca href=\"https:\/\/allthingsfermented.nz\/products\/regulator-mini-360-core-actuator\" title=\"Regulator - Mini 360 Core Actuator\"\u003eRegulator - Mini 360 Core Actuator\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/allthingsfermented.nz\/products\/co2-cartridge-16gm\" title=\"CO2 Cartridge - Food Grade (16gm)\"\u003eCO2 Cartridges\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e304 Stainless Steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDouble Wall Vacuum Insulated\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSprung Wire Lid\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2L capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9234106941500,"sku":"","price":39.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/The_Ultimate_Beer_Growler_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-265335.jpg?v=1717070240"},{"product_id":"mkii-25w-high-temperature-magnetic-pump","title":"MKII 25W High Temperature Magnetic Pump","description":"\u003cp\u003e\u003cspan\u003eA stainless steel pump for the MKII 25watt High Temperature Magnetic Drive Pump from Kegland. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis pump is constructed of food-grade materials and handles boiling wort. The impeller housing is made from polysulfone as it is a tough, food-grade plastic rated up to 120C. The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it’s not self priming, you must put the pump under the level of the liquid source. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis is an extremely efficient 1.1amp pump which can be run continuously at elevated temperatures. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn optional \u003c\/span\u003e\u003ca href=\"https:\/\/allthingsfermented.nz\/products\/pump-head-stainless-for-mkii-pump-25w\" title=\"Pump Head - Stainless for MKII Pump 25w\"\u003estainless steel pump head\u003c\/a\u003e\u003cspan\u003e is also available.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003eVoltage: 240V-AC\u003cbr\u003ePower: 25 watts\u003cbr\u003eMax Head: 3.4m\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eMax Capacity: 19L\/min\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eFittings: 1\/2\" BSP\u003c\/i\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9234197053500,"sku":"KL03841","price":119.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/MKII_25W_High_Temperature_Magnetic_Pump_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-259201.jpg?v=1717065359"},{"product_id":"new-19l-keg","title":"Keg 19L - Kegland Corny Style Keg with LOW2 O-Rings - New","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA new 19 litre keg with ball-lock gas in and beer out posts, and lid with pull-ring pressure relief valve.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThese new kegs are made with a high-barrier elastomer O-Rings to keep your beverage fresher for longer.\u003c\/p\u003e\n\u003cp\u003eUnlike Silicone O-Rings, LOW2 O-Rings are made from synthetic M-Class Cross-Linked elastomer for superior oxygen barrier properties to prevent O2 ingress. This helps keep your beverage fresher for longer.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese premium brand new kegs are rated to 130PSI working pressure and are made using a robotic orbital welding machine. They have smooth welds making them sanitary and easier to clean. The black rubber on these kegs makes them a little nicer to use around your house as they are less likely to damage your tile floors or crack plastic lining inside your \u003c\/span\u003ekegerator\u003cspan\u003e. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThey also have a lid with an internal tab\/hook under the lid designed specifically for attaching a container \u003c\/span\u003e\u003cspan\u003efor dry hopping.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAdd a \u003ca href=\"https:\/\/allthingsfermented.nz\/products\/carbonating-keg-lid\" title=\"Carbonating Keg Lid\"\u003eCarbonating Keg Lid\u003c\/a\u003e to carbonate your beer quickly (overnight) at your standard serving pressure.\u003cbr\u003e\u003cbr\u003eDimensions: approx. 214mm Diameter x 629mm High\u003ci\u003e\u003cbr\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003e\u003cstrong\u003eDO NOT USE BLEACH TO CLEAN. Bleach will break down stainless steel and causing pitting to occur.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9234251415612,"sku":"KL02899","price":159.9,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Keg_19L_-_Kegland_Corny_Style_Keg_with_LOW2_O-Rings_-_New_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-255865.jpg?v=1717062586"},{"product_id":"stainless-steel-quick-disconnect-female-to-13mm-barb","title":"Stainless Steel Quick Disconnect - Female to 13mm Barb","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eStainless Steel Female Quick Disconnect with 13mm barb fitting. Allows you to easily change lines when moving liquids around.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIncludes a food grade O-ring.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eMade from 304 stainless steel.","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":9235205685308,"sku":"","price":12.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Stainless_Steel_Quick_Disconnect_-_Female_to_13mm_Barb_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-262917.jpg?v=1717068308"},{"product_id":"plate-chiller-threaded-mkiv-counterflow-30-plate","title":"Plate Chiller - Threaded MKIV Counterflow 30 Plate","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eChillout Threaded MKIV - Counterflow Chiller - 30 Plate Heat Exchanger.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Chillout MKIV, now with new and improved male 1\/2\" threaded posts is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo clean connect water to supply to the port where your wort was coming out and backflush the unit for a few minutes to ensure that any residue has been completely washed out.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eRemember to sanitise either with boiling wort, or a short flush with StellarSan before use. Do not clean with StellarSoda or leave Phosphoric Acid based sanitisers left to store inside the plate chiller.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIf you require mounting bolts (two spots on the rear), please use a M5 bolts (not included).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eDimensions: 315mm x 73mm x 51mm (not including threads)\u003cbr data-mce-fragment=\"1\"\u003eFrom: Kegland\u003c\/em\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21216354238524,"sku":"","price":199.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Plate_Chiller_-_Threaded_MKIV_Counterflow_30_Plate_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-260624.jpg?v=1717066499"},{"product_id":"keg-post-o-ring","title":"Keg Post O-Ring","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eReplacement o-ring for ball lock keg posts.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21424058138684,"sku":"","price":0.5,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Keg_Post_O-Ring_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-255918.jpg?v=1717062636"},{"product_id":"keg-lid-o-ring","title":"Keg Lid O-Ring","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eReplacement silicone o-ring seal for corny style keg lids. May be black or white.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21424078094396,"sku":"","price":3.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Keg_Lid_O-Ring_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-255906.jpg?v=1717062625"},{"product_id":"universal-keg-poppet","title":"Universal Keg Poppet","description":"A universal poppet that fits inside the post of a corney style ball lock keg.","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21424093134908,"sku":"KL07146","price":1.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Universal_Keg_Poppet_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-265711.jpg?v=1717070539"},{"product_id":"keg-lid-pressure-relief-valve-35-65-100-psi","title":"Keg Lid Pressure Relief Valve - 35, 65, 100 PSI","description":"\u003cp\u003eReplacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.\u003c\/p\u003e\n\u003cp\u003eNow available in three pressure ratings:\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eYellow - 17 PSI\u003c\/span\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003cbr\u003eRed - 35 PSI\u003cbr\u003eGreen - 65 PSI\u003cbr\u003eGrey - 100 PSI\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eFrom: Kegland\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Yellow - 17 PSI","offer_id":42427081293958,"sku":null,"price":6.95,"currency_code":"NZD","in_stock":true},{"title":"Red - 35 PSI","offer_id":39963627782278,"sku":"KL05333","price":6.95,"currency_code":"NZD","in_stock":true},{"title":"Green - 65 PSI","offer_id":39963627815046,"sku":"","price":6.95,"currency_code":"NZD","in_stock":true},{"title":"Grey - 100 PSI","offer_id":39963627847814,"sku":"","price":6.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Keg_Lid_Pressure_Relief_Valve_-_35_65_100_PSI_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-255910.jpg?v=1717062629"},{"product_id":"keg-dip-tube-o-ring","title":"Keg Dip Tube O-Ring","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eReplacement o-ring for corney style keg dip tubes.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21424139042876,"sku":"","price":0.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Keg_Dip_Tube_O-Ring_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-255890.jpg?v=1717062611"},{"product_id":"sodastream-cylinder-filling-adapter-with-bleed-valve","title":"SodaStream Cylinder Filling Adapter with Bleed Valve","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis easy to use SodaStream Cylinder Filling Adaptor will enable you to fill your own CO2 from your larger bulk cylinder into smaller SodaStream cylinders. An easy and inexpensive way to fill your own Sodastream Cylinders at home at a fraction of the cost of getting the refills from your local store.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eNote: Does not fit or work with the latest Sodastream cylinders, only older cylinders. The CO2 Cylinder and Sodastream cylinder in the photos is not included.\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWhen using, be sure to following these important points:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1. That the seals goes in the correct location. So when the SodaStream Filling Adaptor arrives, please make sure to use the correct seal in the correct side.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e2. Make sure to put the Sodastream cylinder on the correct side. The SodaStream cylinder thread can actually fit both sides of this adaptor, but the CO2 cylinder only fit's into the ROUND SIDE. As a result you MUST put the Sodastream cylinder into the HEXAGONAL SIDE. (as shown in image)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/MeopdQRJPTA\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21424353247292,"sku":"KL07306","price":19.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/SodaStream_Cylinder_Filling_Adapter_with_Bleed_Valve_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-261897.jpg?v=1717067492"},{"product_id":"mk4-co2-regulator","title":"Regulator - MK4 CO2","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe MK4 regulator provides reliable gas control. It has a large body for high flow rates and comes with a precision diaphragm for accurate adjustment, and also has a large adjustment knob for easy adjustment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe regulator has also been designed so that the whole seat and seat cap assembly are manufactured as a fully encapsulated part. This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent. This further improves reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNew and improved features in the MK4 version\u003c\/b\u003e\u003cspan\u003e:\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eStronger Steel Gauges made from thicker steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTriple scale gauges in kPa, Bar and PSI\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNew Colour Coded PRV valves allowing different levels of pressure safety. Also being colour coded it's easy to identify which PRV is fitted.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNew M6 Mounting Holes for easy Mounting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e0-50 PSI recommended working pressure (higher pressure gauges and PRV can be fitted to make this model go up to 100 PSI)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eComes with Duotight 8mm - MFL Connector (we recommend using \u003ca href=\"https:\/\/allthingsfermented.nz\/products\/thread-seal-tape\" title=\"Thread Tape\"\u003ethread tape\u003c\/a\u003e to ensure a complete seal)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: This regulator is sold with the Green (65psi) pressure relief valve. Lower (35psi) and higher (100psi ) pressure relief valves are available (sold separately).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eApart from CO2, it is also suitable for \u003c\/span\u003eOxygen\u003cspan\u003e, Argon, Helium, and \u003c\/span\u003eNitrogen\u003cspan\u003e by changing the cylinder connection.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eOutput Pressure Gauge: 0-100 PSI\u003cbr\u003eTank Pressure Gauge: 0-3000 PSI\u003cbr\u003eOutlet: MFL with Barbed Swivel Nut\u003cbr\u003eEffective Working Pressure: 0-50 PSI\u003cbr\u003eFrom: Kegland\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21424407576636,"sku":"KL07429","price":74.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Regulator_-_MK4_CO2_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-261467.jpg?v=1717067154"},{"product_id":"duo-tight-8mm-mfl-connector","title":"Duotight 8mm - MFL Connector","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDuotight are push in fittings with superior sealing capacity due to the double o-ring sealing design. The secret is the high quality EPDM o-rings, two of them. The double o-ring means it has twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly. It also means the hose can bend with a much tighter radius without causing leaking issues. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis push in fitting will fit 8mm outer diameter tubing, while the thread on the other end will suit:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- MFL ball lock disconnects\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- MKIII and MK4 regulators with MFL output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Other fittings with MFL thread\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNo clamps necessary, but we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21620538671164,"sku":"KL06880","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Duotight_8mm_-_MFL_Connector_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253441.jpg?v=1717060188"},{"product_id":"duotight-8mm-5-8-thread","title":"Duotight 8mm - 5\/8 Inch Thread","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDuotight push in fitting for 8mm line to 5\/8inch thread - ideal for keg couplers and tap shanks.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDuotight fittings feature a double o-ring sealing design for a more secure seal. The seals are not only high quality EPDM o-rings but also it has two of them. The double o-ring means there is literally twice the sealing surface when compared with other push in fittings. This makes Duotight fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that you can bend the hose with a much tighter radius without leaking issues. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used for up to 100 psi.\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21620554530876,"sku":"KL06903","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/8_Inch_Thread_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253416.jpg?v=1717060165"},{"product_id":"duotight-8mm-push-fit-joiner","title":"Duotight 8mm Push Fit Joiner","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis Duotight Push-Fit Joiner - 8mm x 8mm - will allow you to join beer or gas line sections on your kegging system. Simple to use and requires no tools.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDuotight push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese push in fittings are suitable to be used up to 100 psi. They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps. To remove the fitting simply push in the collet and the hose can be removed. We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFits 8mm outer diameter tube. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: colour may vary.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21620575240252,"sku":"KL02370","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Duotight_8mm_Push_Fit_Joiner_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253494.jpg?v=1717060236"},{"product_id":"push-fit-t-connector-10mm","title":"Push Fit T Connector - 10mm","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis Push-Fit T-Connector will split the gas (or beer) line on your kegging system in two, allowing you to gas two kegs at the same time. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote that this is 10mm diameter in and out - if you're after 8mm, you'll find it \u003c\/span\u003e\u003ca href=\"https:\/\/allthingsfermented.nz\/collections\/kegging\/products\/push-fit-t-connector\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThey are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFits 10mm outer diameter tube. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: colour may vary.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21620581793852,"sku":"","price":6.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Push_Fit_T_Connector_-_10mm_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-261105.jpg?v=1717066875"},{"product_id":"weldless-thermometer-with-42mm-probe","title":"Thermometer - Weldless with 13cm Probe","description":"\u003cp\u003eA bi-metal weldless thermometer with glass face. Ideal for fitting to your mash tun, hot liquor tank or kettle.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003cbr\u003e- Calibration screw so you can fine tune the temperature\u003cbr\u003e- 304 stainless steel housing and probe\u003cbr\u003e- ½” BSP thread and includes silicon and stainless steel washers.\u003cbr\u003e- Temperature range -5C to 100C customised for brewing\u003c\/p\u003e\n\u003cp\u003eIncludes a slimline nut and 2 x silicone seals plus a stainless washer.\u003c\/p\u003e\n\u003cp\u003eFrom: Kegland\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":21630876549180,"sku":"","price":39.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/dial-thermometer-13cm__54136.1615506134.386.513__64522.jpg?v=1751167257"},{"product_id":"push-in-pressure-gauge-8mm","title":"Push In Pressure Gauge - 8mm","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis push in gauge is ideal to read pressures during pressurised fermentation. The triple scale gauge gives readings in Bar, PSI and kPA so irrespective of what units you prefer this gauge will display what you need.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe barb on this gauge will enable you to put this directly onto hosing or alternatively you can connect it to any of the push in fittings such as the Duotight push in fittings in the 8mm size.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e0-40psi \/ 0-250kPa \/ 0-2.5 Bar (kg\/cm^2)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRubber Coated\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8mm Push in Barb\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003ci\u003eFrom: Kegland\u003c\/i\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":22360830246972,"sku":"KL07696","price":12.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Push_In_Pressure_Gauge_-_8mm_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-261125.jpg?v=1717066889"},{"product_id":"blowtie-diaphragm-spunding-valve-adjustable-prv","title":"BlowTie Diaphragm Spunding Valve - Adjustable PRV","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBlowTie Diaphragm Spunding Valve - Adjustable Pressure Relief Valve - for when you want to control the pressure retained in a pressure vessel. The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe unit can be easily disassembled for cleaning using a phillips head screw driver.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 8mm push fit connectors\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- precise pressure control\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- easy to take apart and clean\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- simple to adjust pressure\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- made from high quality acetal\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- diaphragm activated\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- control pressure from 0-40psi\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePressure Fermentations\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eWith pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process. The BlowTie has been designed specifically for this reason.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePressure Transfers\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eWhen transferring from keg to keg, keg to bottle, or fermenter to keg, it is often a good idea to have head pressure in the keg you are filling, especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe BlowTie has been made different to traditional spunding valves by taking advantage of a diaphragm to actuate the sealing mechanism. This will release pressure from the pressure vessel with much more accurate control.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003eFrom: Kegland\u003c\/i\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":22360859934780,"sku":"KL03643","price":16.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/BlowTie_Diaphragm_Spunding_Valve_-_Adjustable_PRV_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-251399.jpg?v=1717058284"},{"product_id":"duotight-8mm-ball-valve","title":"Duotight 8mm Ball Valve","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDuotight - 8mm shut off ball valve. This is an equal ball valve to take 8mm OD tubing in both sides.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNo clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: colour may vary.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003eFrom: Kegland\u003c\/i\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":22360904826940,"sku":"KL06934","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Duotight_8mm_Ball_Valve_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253462.jpg?v=1717060208"},{"product_id":"duotight-8mm-push-fit-check-valve","title":"Duotight 8mm Push Fit Check Valve","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDuotight 8mm (5\/16) one way check valve\/non-return valve.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis very handy fitting could save your regulator and is a good investment. This particular type of check valve has low opening pressure of only 1 psi. It is suitable for clean liquids such as water or for gas. The spring and internal components are made with stainless steel and quality EPDM seals.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNo clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThese push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFits 8mm outer diameter tube. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: colour may vary.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003eFrom: Kegland\u003c\/i\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":22360924061756,"sku":"KL07047","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Duotight_8mm_Push_Fit_Check_Valve_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253474.jpg?v=1717060220"},{"product_id":"carbonation-and-line-cleaning-cap","title":"Carbonation and Line Cleaning Cap","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis model of carbonation cap does everything that regular carbonation caps do but with several added features.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe post on this unique carbonation cap has been machined to fit both the black\/liquid and grey\/gas ball lock disconnects. This carbonation cap also includes a barb-tail on the underside so you can attach beer line to act as a dip tube.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis allows the carbonation cap to be used in several different ways including:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1. Carbonating\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. Cleaning your beer lines\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. Using it to counter pressure bottle fill PET bottles\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFrom: Kegland\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":22361049071676,"sku":"KL00826","price":15.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Carbonation_and_Line_Cleaning_Cap_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-252594.jpg?v=1717059435"},{"product_id":"beer-tap-shank-cleaning-brush","title":"Beer Tap \u0026 Shank Cleaning Brush","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDouble sided beer tap (faucet) and shank cleaning brush for maintaining your beer taps and shanks.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFrom: Krome Dispense","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":28776248082492,"sku":"c237","price":4.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Beer_Tap_Shank_Cleaning_Brush_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-250890.jpg?v=1717057807"},{"product_id":"ss-brewbucket-replacement-o-rings","title":"Ss Brewtech Brew Bucket Replacement O-Rings","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSs replacement o-rings for Brew Buckets and Mini Brew Buckets.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFor use on Brew Bucket 3\/8\" Ball Valve. Includes:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 4 pcs 8.5 mm x 1 mm Buna N 70 O-rings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 2 pcs 16mm x 1.8 mm Buna N 90 O-rings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 6 pcs total in this set (enough to replace all o-rings on one Brew Bucket valve)\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":29056466845756,"sku":"","price":4.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Ss_Brewtech_Brew_Bucket_Replacement_O-Rings_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-262713.jpg?v=1717068141"},{"product_id":"fermzilla-27l-stainless-steel-pressure-kit","title":"Fermzilla Stainless Steel Pressure Kit","description":"\u003cp\u003eAdd the optional pressure kit to your FermZilla and turn your FermZilla into a true uni tank. \u003c\/p\u003e\n\u003cp\u003eUni tanks are conical fermenters used both for fermentation and for carbonating and serving finished beer. \u003c\/p\u003e\n\u003cp\u003eHere are some possibilities:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFermenting Under Pressure:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFirst one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCarbonating, Pushing, and Serving:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever.  You can also choose to send carbonated beer through a beer filter on the way to your keg.  When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eLack of Oxidation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e•    Ferment beer under pressure to reduce ester and fusel alcohol production\u003c\/p\u003e\n\u003cp\u003e•    Ability to always draw clear beer with the unique, floating draw tube  \u003c\/p\u003e\n\u003cp\u003e•    Keg already carbonated beer\u003c\/p\u003e\n\u003cp\u003e•    Use co2 to push beer into a keg or though a filter into a keg\u003c\/p\u003e\n\u003cp\u003e•    Carbonate and serve beer directly from the FermZilla, eliminating kegging all together\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":29763874062396,"sku":"KL14076","price":39.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Fermzilla_Stainless_Steel_Pressure_Kit_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253993.png?v=1717060743"},{"product_id":"fermzilla-27l-conical-uni-tank-fermenter","title":"FermZilla - 27L - Tri-Conical Unitank Fermenter - Gen3.2","description":"\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dRA6fe3eEvA?si=bL2tZTbDJk5YPjzh\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cstrong\u003eFermZilla 27L Tri-Conical Starter Kit - Generation 3.2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the Gen3 FermZilla Tri-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and a 600mL collection container with a 3 Inch Tri-clover connection, the gold standard for sanitary design and effortless removal. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.\u003cbr\u003e\u003cbr\u003eThe new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.\u003c\/p\u003e\n\u003cp\u003eThis is an incredible product at an extremely attractive price point in all the different sizes and models.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe FermZilla 27L Tri-Conical can be used in the following ways:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBasic Gravity Fermenter - New Brewers\u003c\/li\u003e\n\u003cli\u003ePressure Brewing Kit -\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMost Popular\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eHop Bong Pressure Kit - For Intermediate Brewers\u003c\/li\u003e\n\u003cli\u003eGlycol Twister Pressure Brewing Kit - Glycol Obsessed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's new the difference between Gen2 and Gen3?\u003c\/strong\u003e\u003cbr\u003e1. Moulded 3 inch tri-clamp ferrule in the body of the FermZilla tank\u003cbr\u003e2. 3 inch tri-clamp butterfly valve\u003cbr\u003e3. 3 Inch tri-clamp 600mL collection container\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it easier to clean \/ take apart than the Gen2?\u003cbr\u003e\u003c\/strong\u003eYES, It is by far the easiest Conical PET fermenter to disassemble and clean into all the nooks and crannies. Simply release all pressure inside the vessel and detatch the tri clover clamps.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eWhat does the starter kit come with?\u003cbr\u003e\u003c\/strong\u003e      1 x 27L Conical FermZilla Tri-Conical Base Kit (unassembled)\u003cbr\u003e      1 x 27L Gen3 Tri-Conical Tank with metal neck ring\u003cbr\u003e      1 x Standard Top Lid, with Red PRV (35psi) [2 x Male PCO1881 Cap Threads] [Up to 4 drill ports for accessories]\u003cbr\u003e      1 x Collar Lid Ring\u003cbr\u003e      1 x Grommet PCO1881 Black Cap + 1 x Blank PCO1881 Black Cap for lid\u003cbr\u003e      1 x Premium 3 Piece Airlock\u003cbr\u003e      1 x 3 inch tri-clamp to 3 inch tri-clamp butterfly valve\u003cbr\u003e      1 x 600mL Collection Container \u0026amp; Lid* [2 x Male Cap Threads]\u003cbr\u003e      2 x Blank PCO1881 Black Cap\u003cbr\u003e      1 x 3 piece ~ 3 inch tri clover clamp [+ 1 x 3\" Beaded Silicone Seal]\u003cbr\u003e      1 x 2 piece ~ 2 inch tri clover clamp [+ 1 x 2\" Beaded Silicone Seal]\u003cbr\u003e      1 x Stainless Stand with swing handles\u003cbr\u003e      1 x Stainless Steel Handle Assembly\u003cbr\u003e      1 x Strip Stick On Thermometer\u003cbr\u003e      1 x Level indicator sticker (Litres and Gallons)\u003cbr\u003e      1 x Spare Lid O-Ring\u003cbr\u003e      1 x Spare Collection Container O-Ring\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eInstructions:\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cstrong\u003eTo download the instruction sheet for this product click on the link below:\u003cbr\u003e\u003c\/strong\u003e\u003ca title=\"FermZilla 27L - Tri-Conical PDF Instruction Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0667\/3019\/7248\/files\/FermZilla_Tri-Conical_27L_and_55L_Instruction_Manual.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eFermZilla 27L - Tri-Conical PDF Instruction Manual\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDimensions:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo download the dimensioned drawings for this product click on the link below:\u003cbr\u003e\u003cspan\u003e\u003ca title=\"FermZilla 27L Tri-Conical Dimensioned Drawing\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0667\/3019\/7248\/files\/FermZilla_27L_Tri-Conical_Dimensions.pdf\" rel=\"noopener\" target=\"_blank\"\u003eFermZilla 27L Tri-Conical Dimensioned Drawing\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWarnings:\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePlease read the instructions thoroughly before use\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWe will not be held liable for misuse or mishandling of the unit contrary to the instructions.\u003c\/li\u003e\n\u003cli\u003eKeeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.\u003c\/li\u003e\n\u003cli\u003eDo not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e:\u003cbr\u003eWhen using this vessel under pressure.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYou must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time\u003c\/strong\u003e. To do this. Fill your FermZilla up with some water, then apply a \u003cem\u003eminimum\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eof 15psi pressure to the vessel. Check for leaks around all Cap \/ Threads by tipping it upside down, in all directions where there are risks of leakage. \u003c\/p\u003e\n\u003cp\u003eOccasionally these units may come with some small indentations\/dimples\/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":29763950772284,"sku":"KL25898","price":199.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/FermZilla-Tri-Conical-27__17408.jpg?v=1725178462"},{"product_id":"beer-growler-draft-kit-mini-tapping-head","title":"Beer Growler Draft Kit - Mini Tapping Head","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis mini draft tapping head will turn your growler into a portable keg system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe growler is purchase separately and can be purchased at this link: \u003c\/span\u003e\u003ca title=\"The Ultimate Beer Growler\" href=\"https:\/\/allthingsfermented.nz\/products\/the-ultimate-beer-growler\"\u003eUltimate Vacuum Insulated Growler\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis convenient growler tapping head is the best way to keep your precious beer fresh and carbonated in the beer. The pressure applied by CO2 will keep your beer away from damaging oxygen and keep the beer carbonated for ages.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe vacuum walled growler will also keep the beer cold for ages meaning you don't even need a chilly bin or cooler box.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis system doesn't include the regulator, growler or co2 bulbs. These can be purchased separately.\u003c\/b\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":29789838606396,"sku":"KL04299","price":22.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Beer_Growler_Draft_Kit_-_Mini_Tapping_Head_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-250765.jpg?v=1717057686"},{"product_id":"sodastream-co2-adapter-deluxe-with-pin-adjustment","title":"Sodastream CO2 Adapter - Deluxe with Pin Adjustment","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis adapter allows a SodaStream cylinder to attach to a CO2 regulator for your kegging set up. It is ideal for low volume CO2 use and avoids renting or purchasing a larger CO2 cylinder. This is the deluxe version, with pin adjustment which makes the SodaStream cylinder adaptor significantly easier to use.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNormal SodaStream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically and it may leak gas when connecting and disconnecting from your regulator. This new SodaStream adaptor is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or a picnic and you don't want to carry your 4.5kg or 2.6kg Gas Cylinder, as it will enable you to make a handy portable system.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: Does not include regulator or gas canister.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf you need to change the o-rings on this device \u003c\/span\u003e\u003ca href=\"https:\/\/www.kegland.com.au\/media\/pdf\/Sodastream%20Adaptor%20How%20to%20Replace%20O-rings.pdf\"\u003ehere is the instruction manual on how to do this\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":29790347067452,"sku":"KL07290","price":19.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Sodastream_CO2_Adapter_-_Deluxe_with_Pin_Adjustment_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-261856.jpg?v=1717067460"},{"product_id":"fermzilla-27l-jacket","title":"FermZilla - 27L Conical Jacket \u0026 All Rounder 60L Jacket (2 in 1)","description":"\u003c!-- split --\u003e\n\u003ch4 class=\"ds-markdown-paragraph\"\u003e\n\u003cstrong\u003eHelp Stabilize Your Fermentation Temperatures with the FermZilla Insulating Jacket\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFits both FermZilla 27L Conical and All Rounder 60L\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003eGive your fermenter practical temperature support! Kegland’s insulating jacket easily zips over your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e27L Conical or 60L All Rounder\u003c\/strong\u003e, creating a protective thermal layer to reduce ambient temperature swings. Use it standalone or supercharge your control with these active solutions:\u003c\/p\u003e\n\u003ch4\u003eHow It Works:\u003c\/h4\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eReduces Temperature Fluctuations:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMinimises impact from room temperature changes\u003cbr\u003e\u003cstrong\u003eActive Heating:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePair with a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/rapt-temperature-controller?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eRAPT Temperature Controller\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/heating-wrap-belt-with-velcro-strap-30watts?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eHeating Wrap\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eActive Cooling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/fermzilla-temp-twister-cooling-heating-coil?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eTemp Twister Coil\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/temp-twister-pump-kit?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003ePump Kit\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePassive Cooling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePlace frozen water bottles between jacket and fermenter\u003cbr\u003e\u003cstrong\u003eFull Coverage Design:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLight-blocking insulation with lid access\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003cbr\u003e→ FermZilla 27L Conical (Gen 3)\u003cbr\u003e→ All Rounder 60L\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eYour Complete Thermal System:\u003c\/strong\u003e\u003cbr\u003eMaximize control with these setups:\u003cbr\u003e→\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBasic:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eJacket alone (reduces fluctuations)\u003cbr\u003e→\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePro Heating:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eJacket +\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/rapt-temperature-controller?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eRAPT Controller\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/heating-wrap-belt-with-velcro-strap-30watts?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eHeating Wrap\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e→\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePro Cooling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eJacket +\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/fermzilla-temp-twister-cooling-heating-coil?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eTemp Twister Coil\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/temp-twister-pump-kit?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003ePump Kit\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e→\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDIY Cooling:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eJacket + frozen bottles\u003c\/p\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eComplete Your Temperature Control Kit:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eHeating Solutions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/rapt-temperature-controller?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eRAPT Temperature Controller\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/heating-wrap-belt-with-velcro-strap-30watts?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003e30W Heating Wrap\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003cstrong\u003eCooling Solutions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/fermzilla-temp-twister-cooling-heating-coil?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eTemp Twister Cooling\/Heating Coil\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"ds-markdown-paragraph\"\u003e\u003ca rel=\"noreferrer\" href=\"https:\/\/allthingsfermented.nz\/products\/temp-twister-pump-kit?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003eTemp Twister Pump Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":30084961337404,"sku":"KL11488","price":49.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Fermzilla_27L_Jacket_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253941.png?v=1717060690"},{"product_id":"fermzilla-collection-container-1000ml","title":"Fermzilla Collection Container - 1000ml","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA FermZilla replacement collection container with 1000ml capacity. This yeast collection container fits the FermZilla fermenters and is primarily used for collection and addition of hops and yeast via the butterfly valve.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis collection container can also be used for yeast starters meaning that you can create the yeast starter in this collection container directly then attach to the valve of the FermZilla so you can pitch yeast without needing to open the lid. This collection container has been designed to work with the magnetic stirrer machine.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe ports on the side of this collection container are the same as a standard coke bottle or soft drink bottle. The threads are designed to suit the stainless carbonation caps or plastic carbonation caps. These carbonation caps will enable you to purge oxygen for dry hopping, attach carbonation stone and carbonate liquid in the FermZilla, oxygenate wort and are useful for many other reasons.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe clear body is made from Tritan from Eastman Plastics. This heat tolerant plastic is BPA, and plasticiser free. The Lid is made from impact resistant HDPE. Both lid and body can handle boiling wort.\u003c\/span\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":30084970512444,"sku":"KL11365","price":19.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Fermzilla_Collection_Container_-_1000ml_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253968.jpg?v=1717060718"},{"product_id":"push-fit-check-valve-10mm","title":"Push Fit Check Valve 10mm","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis Push-Fit Check Valve is a one way check valve\/non-return valve for 10mm OD kegging lines.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote that this is 10mm diameter in and out - if you're after 8mm, you'll find it \u003c\/span\u003e\u003ca href=\"https:\/\/allthingsfermented.nz\/products\/duotight-8mm-push-fit-check-valve\" title=\"Duotight Push Fit Check Valve 8mm\"\u003ehere\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThey are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFits 10mm outer diameter tube.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNote: colour may vary.\u003c\/span\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":30929832050822,"sku":"","price":16.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Push_Fit_Check_Valve_10mm_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-261053.jpg?v=1717066834"},{"product_id":"push-fit-8mm-push-fit-joiner","title":"Push Fit Joiner 10mm","description":"\u003cp\u003e \u003c\/p\u003e\n\u003csection class=\"product-description\"\u003e\n\u003cp\u003eThis Push-Fit Joiner will allow you to join beer or gas line sections on your kegging system.\u003cbr\u003e\u003cbr\u003eNote that this is 10mm diameter in and out - if you're after 8mm, you'll find it\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/allthingsfermented.nz\/products\/duotight-8mm-push-fit-joiner\" title=\"Push Fit 8mm Joiner\"\u003ehere\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eThey are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.\u003cbr\u003e\u003cbr\u003eFits 10mm outer diameter tube.\u003cbr\u003e\u003cbr\u003eNote: colour may vary.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"product-add-cart\"\u003e\u003cheader\u003e\u003c\/header\u003e\u003c\/section\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":30929833328774,"sku":"","price":7.95,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Push_Fit_Joiner_10mm_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-261094.jpg?v=1717066866"},{"product_id":"fermzilla-plastic-pressure-kit","title":"Fermzilla Plastic Pressure Kit","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFermZilla Plastic Pressure Kit - suits both 27L and 55L FermZilla fermenters. This is the plastic version, there is also a \u003c\/span\u003e\u003ca title=\"Fermzilla Stainless Steel Pressure Kit\" href=\"https:\/\/allthingsfermented.nz\/products\/fermzilla-27l-stainless-steel-pressure-kit\"\u003estainless option\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdd this optional pressure kit to your FermZilla and turn your FermZilla into a true unitank. Unitanks are conical fermenters used both for fermentation and for carbonating and serving finished beer. This extremely inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFermenting Under Pressure:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eFirst one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also a good idea to have two relief valves on the FermZilla anytime the unit is under pressure.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCarbonating, Pushing, and Serving:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLack of Oxidation\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFerment beer under pressure to reduce ester and fusel alcohol production\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAbility to always draw clear beer with the unique, floating draw tube\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eKeg already carbonated beer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUse co2 to push beer into a keg or though a filter into a keg\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCarbonate and serve beer directly from the FermZilla, eliminating kegging all together\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1 x\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" title=\"Carbonation \u0026amp; Line Cleaning Cap - Plastic - Red\" href=\"https:\/\/www.brewshop.co.nz\/carbonation-line-cleaning-cap-plastic.html\"\u003eRed Plastic Carbonation Cap\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" title=\"Carbonation \u0026amp; Line Cleaning Cap - Plastic - Yellow\" href=\"https:\/\/www.brewshop.co.nz\/carbonation-line-cleaning-cap-yellow.html\"\u003eYellow Plastic Carbonation Cap\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e1 x\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" title=\"Float \u0026amp; Dip Tube Filter Kit For FermZilla or Kegmenter\" href=\"https:\/\/www.brewshop.co.nz\/float-dip-tube-filter-kit.html\"\u003eFloat \u0026amp; Dip Tube Filter Kit\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Brewshop","offers":[{"title":"Default Title","offer_id":31290879410310,"sku":"KB02113","price":24.95,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/files\/Fermzilla_Plastic_Pressure_Kit_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-253985.jpg?v=1717060734"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0008\/7221\/8684\/collections\/Kegland_-_All_Things_Fermented_Home_Brew_Supplies_Shop_Wellington_Kapiti_NZ-266773.jpg?v=1717071422","url":"https:\/\/allthingsfermented.nz\/collections\/kegland.oembed?page=8","provider":"All Things Fermented | Home Brew Supplies Shop","version":"1.0","type":"link"}