Sort by:
A replacement screw cap for the 5L Demijohn with Screw Cap.
A 5 litre glass jar suitable for small fermentations and the storage of spirits.
A Demijohn Bored Bung fits the opening of the jar perfectly enabling an airlock to be attached.
Add a Swing Lid or use a Demijohn Solid Bung as a stopper.
The Easy Syphon 3/8 Inch and Easy Syphon 350mm are both compatible with this demijohn.
Note: The handle and shape of the Demijohn may vary.
This 5 litre glass demijohn is perfect for small fermentations (4.5 litre / 1 gallon), the storage of spirits, and the aging/conditioning of wine or mead.
The Bung with hole #9.5 - 38mm-46mm or Bung - Bored - 37-45mm - Silicone fits perfectly to enable an airlock to be attached so the Demijohn can be used as a fermenter.
Compatible with both the Easy Syphon 350mm and the Easy Syphon 3/8 inch.
Standard S shape airlock for sealing your fermenter.
Please note that your fermenter will need an airlock grommet or top hat grommet (sold separately) to attach the airlock to most fermenters.
May not include red cap, depending on supplier.
The three piece airlock is a great choice for monitoring fermentation and stopping contaminant’s entering your fermenter. Easy to fill and disassembles for superior cleaning and sanitation.
Fill with water to the indicator line and insert in drilled stopper or bung to vent gases during fermentation. Includes body, piston, and vented cap.
This airlock is slightly shorter than the Standard S Shape Airlock.
Please note that your fermenter will need an airlock grommet or top hat grommet (sold separately).
The Airlock - Vintage Bubbler is an essential tool for home brewing fermentation. Designed to allow gases to escape while preventing outside air and contaminants from entering, it helps maintain a clean and controlled environment.
Please note that your fermenter will need an airlock grommet or top hat grommet (sold separately) to attach the airlock to most fermenters.
Auto Syphon Racking Cane Easy Jiggler - 304 Stainless Steel - for syphoning out of a carboy, demijohn, bucket or FermZilla. This siphon includes 150cm x 10mm ID silicone tube.
This whole assembly is plasticiser and BPA free. It will not break like the plastic auto syphons or polycarbonate designs.
It's made robust out of 304 grade stainless steel and is really easy to take apart for cleaning. It's more versatile than a conventional racking cane and easier to start but at the same time similarly simple to use and clean.
Forget about fermenter taps and use a syphon. Threaded fermenter taps are hard to clean and sanitise so having a fermenter without a tap is often the best choice, and to get the beverage out of the fermenter without a tap this siphon is the natural choice.
INSTRUCTIONS
1: Sanitise and rinse your syphon
2: Make sure you have the full vessel significantly above the empty vessel you are filling
3: Attach the curved syphon to the hose
4: Submerge the end of syphon into your full container.
5: With long swift strokes, shake the syphon tube up and down to start the syphon action
Length: 57cm
Stainless tube: 14mm OD x 12mm ID
Silicone Tube: 1.5m x 10mm ID
From: Kegland
A bored bung that tapers from 26mm across the top to 19mm across the bottom. Fits the Mangrove Jacks 25L Stainless Steel Fermenter.
A bored silicon bung for use with an airlock. It is 38mm at the top tapering down to 25mm at the bottom.
Fan Tip Bottle Brush with long handle making it ideal for cleaning plastic and glass beer bottles.
From: Kegland
A bored silicone bung with a 37-45 mm taper. Fits 5L Demijohn with Screw Lid.
A solid silicone bung with a 37-45 mm taper. Fits 5L Demijohn with Screw Lid.
A bung with a diameter of 46mm across the top, tapering to a diameter of 38mm across the bottom.
Fits the 5L Glass Jar Demijohn with Screw Cap/Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.
A solid bung with a diameter of 46mm across the top, tapering to a diameter of 38mm across the bottom.
Fits the 5L Glass Jar Demijohn with Screw Cap/Lid perfectly.
The Demijohn Handle makes it easier to move your full Demijohn/Carboy, reducing the risk of spillage.
It works with both the 23L Carboy and 11.5L Carboy.
A silicon bung with a diameter of 34mm across the top, tapering to a diameter of 26mm at the bottom.
Fits the 5L Glass Jar Demijohn with Mecanicco Swing Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.
Does not fit the 5L Glass Jar Demijohn with Screw Cap/Lid.
A curved brush to make it easier to clean the shoulders of a demijohn.
Approximately 60cm from the top of the handle to the curve in the brush.
A solid silicon bung with a diameter of 32mm across the top, tapering to a diameter of 28mm at the bottom.
Fits the 5L Glass Jar Demijohn with Mecanicco Swing Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.
Does not fit the 5L Glass Jar Demijohn with Screw Cap/Lid.
The Easy-Siphon makes syphoning your beer or wine simple and is designed to start the flow in one stroke. The Easy-Siphon is made out of acrylic and includes a 60cm racking tube bent to perfection. It also includes an Anti-Sediment Tip.
The Tubing - 9.5mm ID fits snugly over the racking tube.
Compatible with the 5L Glass Jar Demijohn and 5L Glass Jar Demijohn with Screw Cap/Lid.
The Easy Siphon Clip holds your Easy Siphons to Carboys, Buckets and more! Made from lasting plastic materials, so you can clip and unclip your Easy Siphons without issues.
Works with:
- Easy Siphon 3/8"
- Easy Syphon Mini - 350mm
- Legacy Easy Siphon 3/8"
Please note: if the clip is used with the Legacy Easy Siphons (pre-2022 models), it will not work with the new models afterwards as the clamps will stretch to adapt to the bigger diameter of the older models.
A smaller (shorter) 350ml syphon. Perfect to use with smaller fermenters.
The Tubing - 9.5mm ID fits snugly over the racking tube.
Compatible with the 5L Glass Jar Demijohn and 5L Glass Jar Demijohn with Screw Cap/Lid.
Large stainless steel funnel with a handle for bottling spirits. Also ideal for use with paper coffee filters if transferring oak aged spirits or spirit that has been polished on carbon.
Specifications
- 14cm diameter, not including handle
- 12.5cm height
- Stainless Steel
- Dishwasher Safe
A bored silicone bung for the Grainfather GF30 and SF70.
Measures approximately 41mm across the top, tapering to approximately 35mm across the bottom.
A 1 gallon (3.8 litres) wide-mouth glass jar with a plastic screw top lid. Ideal for steeping, macerating, or ageing spirit.
Could also be used as a small fermenter by making a small hole in the lid and adding a top hat grommet and airlock.
Dimensions
- Diameter: 155mm approx.
- Height: 260mm approx.
- Mouth Diameter: 100mm approx.
A 60 litre plastic carboy/barrel fermenter suitable for fermenting beer, cider, wine, or spirits.
You may also require:
A mix-stir agitator rod makes aerating in a carboy a breeze. Simply attach the agitator rod to your drill and you are ready to go. The blades fold up for easy insertion into any sized carboy (except 5L or under).
De-gas your wine in a few minutes, or aerate your wort for a healthy fermentation.
The mix-stir is very effective at de-gassing your wine although it should not be used for more than a few 10-15 second bursts. If you over-use the mix-stir you risk adding oxygen to your wine.
This part is only suitable for the 1L Power Sprayer (Rechargeable USB Type-C). It is not a standard thread size. It has been custom made for this product and this product only.
Includes:
Custom Thread Type Multi-Post
From: Kegland
A 23 litre plastic carboy (bottle) suitable for fermenting beer, cider, wine, or spirits.
The Rubber Stopper #10 fits this carboy.
This 5L Plastic Carboy is made from alcohol-safe plastic and includes a lid. These are great for fermenting meads, cider, wine and spirit wash or as storage containers for spirits.
Handcraft Supplies 45 cm Plastic Mixing Spoon for mixing homebrew ingredients. This food grade spoon measures approx. 45 cm / 18 inches allowing use in most fermenters up to 30 litres.
Perfect for spraying down brewing equipment with dissolved cleaners or sanitisers.
Ideal for coupling with Multi-Post for Power Sprayer to turn the sprayer into a pressurised line cleaning device.
Includes:
1L Reservoir Tank
Power Sprayer Nozzle and Dip Tube
White plastic adjustment head sprayer
15cm USB C to Standard USB (for charging purposes)
Food Grade
This product is made from food grade, Santoprene, PP, PE, Silicone and Stainless Components.
Battery Life
The pump has large 18650 li-ion rechargeable battery. On a full charge the battery will empty the 1L tank 18-30 times so it lasts for ages.
NOTE: If you use fine mist it will be closer to 18 times but if you use a jet/stream the battery will last closer to 30 times.
Does Not Include:
USB wall charger
Multi-Post for Power Sprayer
From: Kegland
