A Hygiene Plug for beer faucets to help keep beer taps clean. Protects taps from fruit flies and contamination when not in use. Eliminates the time and waste of wrapping beer taps overnight.

Fits most types of beer taps. Do not completely plug Intertap/Nukatap taps.

Note: colour may vary.

From: Krome Dispense

Fan Tip Bottle Brush with long handle making it ideal for cleaning plastic and glass beer bottles.

From: Kegland

Serve the Perfect Pint, Every Time.

Don't let dirty beer lines ruin your hard-earned pour. The Brewmaster Beer Line Cleaner is a professional-grade, powerful 500ml steriliser and sediment cleaner designed to give you crystal-clear beer and uncompromised flavour from the keg to the glass.

Why Regular Cleaning is Non-Negotiable

Cleaning your beer lines isn't just a chore; it's critical for quality and safety. Over time, lines accumulate:

• Yeast & Sediment: Creates off-flavours and cloudy beer.
• Beer Stone & Biofilm: A hardened scale that harbours bacteria, spoiling the true taste of your beer.
• Mould & Bacteria: Can not only affect taste but also pose a health risk.

Neglecting your lines means serving stale, flat-tasting beer and damaging your expensive equipment. A regular cleaning schedule with Brewmaster ensures every pour is fresh, crisp, and flavourful.

Key Features & Benefits

• All-in-One Power: Effectively cleans and sterilises all beer lines and kegs, removing stubborn sediment, beer stone, and flavour-tainting biofilm.
• Unmatched Endorsement: Approved by all major breweries, so you can use it with absolute confidence in any professional or home setup.
• Rigorous Standards: Formulated to meet the high standard of ANZFSA C38 Approval, guaranteeing its safety and efficacy for food contact surfaces.
• Concentrated & Cost-Effective: A powerful alkaline-based concentrate (25% alkaline salts) means a little goes a long way, providing excellent value.
• Easy to Use: Simply circulate a 5% solution (100ml in 2 litres of warm water) for 15 minutes, then rinse thoroughly. It’s a quick process for a massive quality payoff.
• Proudly Local: Manufactured in Auckland, NZ, supporting local industry and ensuring a reliable supply.

Simple Usage Instructions

1. Mix: Dilute 100ml of Brewmaster Cleaner into 2 litres of warm water.
2. Circulate: Run the solution through your beer lines and keg for 15 minutes.
3. Rinse: Thoroughly flush the system with clean, warm water.
4. Reconnect & Enjoy: Your system is now clean, sterile, and ready to pour the perfect beer!

Elevate your beer service. Choose the cleaner the professionals trust.

A heavy-duty cleaning powder designed to remove stubborn residue from beer and spirit bottles. It dissolves grime, yeast rings, and organic buildup, preparing bottles for sterilising. Best used as a strong cleaner before using a sanitising agent.

Instructions:

Using gloves, wash bottles in a solution of 25 g washing powder to 4.5L of hot water, then rinse thoroughly. Cleaner only – sterilise using a BrewMaster sterilising agent.

Ingredients: Alkaline Salts 97.5%.

Potassium Metabisulphite is a sulphur-based compound that is used primarily to sterilise wine and cider making equipment and to protect the finished product. It works by releasing sulphur dioxide (SO2) into the wine, which helps to kill bacteria and inhibit the growth of most wild yeast, ensuring a clean and controlled fermentation.

It can also be used to eliminate both free chlorine and the more stable form, chloramine, from brewing and make-up water.

One gram of potassium metabisulphite will impart approximately 60 parts-per-million of sulphur dioxide (SO2) to each litre of wine. (Please note that this is an approximation; the exact amount of free SO2 can depend on the pH and tannin content of the wine).

As a guide, to treat wine must: Add 0.2g of potassium metabisulphite per litre of juice. Pre-dissolve it in a small quantity of cool water before adding to the must. Allow the must to ventilate in an open container for 24 hours before adding your chosen yeast.

It can also be used as a dependable all-round powdered sanitiser suited to almost any brewing or distilling setup. Ideal for those who want a classic sulphite-based sanitising method that is effective, economical, and widely used in home brewing. Helps prevent spoilage by controlling wild yeast and bacteria on equipment surfaces.

Instructions for use as a sanitiser:

Wash cleaned equipment (fermenters, bottles, siphons, etc.) in a solution of 40 g Potassium Metabisulphite to 4.5 L of warm water. Allow equipment to stand for 30 minutes to dry, then rinse with clean cold water before use.

Ingredients: Potassium Metabisulphite 100%.

Sodium Metabisulphite is a sulphur based compound that is used primarily to sterilise wine and cider making to kill bacteria and to inhibit the growth of most wild yeast.

It can also be used to eliminate both free chlorine and the more stable form, chloramine, from water.

One gram of metabisulphite will impart approximately 60 parts-per-million of sulphur dioxide (SO2) to each litre of wine.

As a guide, to sanitise wine must add 0.2 g of metabisulphite per litre of juice. Pre-dissolve it in a small quantity of water before adding to the must. Allow the must to ventilate in an open container for 24 hours before adding yeast.

It can also be used as a dependable all-round powdered sanitiser suited to almost any brewing or distilling setup. Ideal for those who want a classic sulphite-based sanitising method that is effective, economical, and widely used in home brewing. Helps prevent spoilage by controlling wild yeast and bacteria.

Instructions for use as a sanitiser:

Wash cleaned equipment in a solution of 50 g Sodium Metabisulphite to 4.5 L of warm water. Allow equipment to stand for 30 minutes to dry, then rinse with clean cold water.

Ingredients: Sodium Metabisulphite 100%.

Here is a link to an excellent article on the use of metabisulphate.

Take the work out of cleaning corny kegs, carboys and brewing vessels with the Bucket Blaster keg and fermenter cleaner. The Bucket Blaster is a great way to get your kegs, fermenters, fermzilla, carboy's or other brewery gear clean while you attend to other tasks.

Simply set up the keg washer basin with your cleaner or sanitiser, set a keg or carboy on over the jet nozzle, power up pump and let the keg washer do the work.

This unit comes with a 15L bucket which doubles as a storage container when you are not using the system. Some other keg washers come with a very small reservoir making it a pain to move, liquid spills over the sides easily and generally they just do not work as well. This unit has a large 15L bucket making it much less likely for you to spill liquid on your floor.

This system includes a 2000 litre per hour pump, the 15L bucket, a powerful jet nozzle, 3/8 EVABarrier tubing, a Duotight tee piece, a grey and a black ball lock disconnect and the stainless stand.

You can find instructions on how to assemble, operate, and maintain the bucket blaster here.

From: Kegland

NZ Made PBW Alternative

Alkaline powder, cleaner and sanitiser

CLARK PROCESS CS is a specially formulated alkaline powder cleaner and sanitiser primarily designed for pipelines and associated equipment in food manufacturing, brewing, and wine industries. It is non caustic and contains active oxygen ingredients to safely and effectively remove protein soils.

Directions for use

Use at a rate of 10g - 20g per litre of hot water. 

Pump or circulate through lines to be cleaned for at least 10 minutes and then drain. Rinse well with cold water and drain. Safe for use on all metals and plastics, however spot testing is recommended. 

Net contents: 2kg

Made in New Zealand.

A curved brush to make it easier to clean the shoulders of a demijohn.

Approximately 60cm from the top of the handle to the curve in the brush.

Economy 81 seat bottle tree with carrying handle made by Ferrari Group in Italy. The layers of the Economy bottle trees screw together for a very strong and stable unit.  Due to the handle you cannot set a sanitiser injector on top.

• Holds up to 81 bottles
• Can be used for beer or wine bottles
• Rotating base to easily load and unload bottles

This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the counter flow wort chiller, pipes and pumps.

This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.

Instructions

• Add 2 Tbsp of cleaner to 15 L of water at 60°C to your Grainfather.
• Attach the counter flow wort chiller and recirculate the cleaner for 15 minutes.
• Remove the counter flow wort chiller and attach the recirculation pipe and recirculate for another 5 minutes.
• Rinse all surfaces that came in contact with the cleaner thoroughly with water.
• Gently scrub the inside of the boiler with a soft bristle brush to remove left over stains.
• Rinse and drain.

Mangrove Jack's ECD Cold Water Detergent effectively cleans and deodorises everything you use for brewing, winemaking and distilling. Cold Water ECD Cleaner Detergent is a powerful cleaner removing dirt, stains and undesirable micro-organisms, restoring your surface to its original condition.

Cleaning plays an essential role in good brewing, wine making, and distilling. You should always clean your equipment prior to sterialising.

Mangrove Jack's No Rinse Sanitiser effectively sanitises brewing, wine making, and distilling equipment.

Unlike conventional alkaline powdered sanitisers, Mangrove Jack's No Rinse Sanitiser requires no rinsing. It makes the vital job of sanitising equipment easy and effective. It utilises active oxygen, which breaks down to leave only oxygen, water, and minerals found naturally in water.

Contains: Sodium Percarbonate 880g/kg

Low Volume CIP Spinning Spray Rotor (stainless swivel nut and barb).

Introducing the new Low Volume CIP Spray motor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day.

- Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units)

What can it do?
Clean In Place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to.

Specifications

1 x Custom molded rotating spray head with 1/2" BSP thread
1 x 300mm length silicon tubing suitable for your BrewZilla recirculation arm
1 x Stainless nut and barb

Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down.

From: Kegland

This Pressure Filler Cap makes transferring beer to a bottle easy! If you keg your beer and want to take a few bottles for you to drink or your friends to try, this is the perfect piece of equipment for you. It can also be used to 
carbonate your beer or water or used to clean your beer lines. 

This fits both the black/liquid and grey/gas ball lock disconnects and has a barb tail that fits 6mm tubing if you wish to use this when filling bottles. 

This part is only suitable for the 1L Power Sprayer (Rechargeable USB Type-C). It is not a standard thread size. It has been custom made for this product and this product only.

Includes:

Custom Thread Type Multi-Post

From: Kegland

A long Nylon Hose Brush for beer line cleaning on your kegging system.

Sizes:

• 4.76mm (3/16") x 167cm
• 9.53mm (3/8") x 167cm

Made by: Krome Dispense

Perfect for spraying down brewing equipment with dissolved cleaners or sanitisers.

Ideal for coupling with Multi-Post for Power Sprayer to turn the sprayer into a pressurised line cleaning device.

Includes:
1L Reservoir Tank
Power Sprayer Nozzle and Dip Tube
White plastic adjustment head sprayer
15cm USB C to Standard USB (for charging purposes)

Food Grade
This product is made from food grade, Santoprene, PP, PE, Silicone and Stainless Components.

Battery Life
The pump has large 18650 li-ion rechargeable battery. On a full charge the battery will empty the 1L tank 18-30 times so it lasts for ages.
NOTE: If you use fine mist it will be closer to 18 times but if you use a jet/stream the battery will last closer to 30 times.

Does Not Include:
USB wall charger
Multi-Post for Power Sprayer

From: Kegland

StellarClean Powerful Brewery Wash (PBW) is an alkaline, non-caustic, environmentally and user friendly cleaner.

Benefits
- Replaces caustic soda cleaners
- Effective at all temperatures
- Free rinsing
- Safe on polycarbonate surfaces
- Safe to handle
- Non-hazardous & non-corrosive
- Excellent hard water tolerance
- Removes protein soil and staining, baked on carbon, and fatty acids

Directions For Use
Concentrate - Spray Bottles, Scrubbing, Beer Lines
Use 10-15g per 1L

CIP Cleaning
Use 2.5-5g per 1L

Soaking of Kettles, Fermenters, Kegs and Tanks
Use 0.5-1g per 1L 

1 Scoop is 20g
Rinse vessels with same temperature water used after cleaning

In Depth Benefits
- Suitable for commercial and home brewers.
- Soak equipment overnight in PBW solution and rinse the following morning with the same temperature water that was applied to it to begin with.
- Will not damage rubber gaskets, soft metals or your skin.
- This solution can effectively clean items that can't be reached with a brush or sponge, and is strong enough to remove thick, difficult and caked-on organic soils.
- Keep a bucket of this solution around for cleaning small parts when needed.
- Recirculate hot solution through your pump and counterflow chillers to remove hidden debris.
- Perfect for cleaning kegs or bottles before sanitising.
- PBW is environmentally friendly, biodegradable, and will not harm septic systems.
- It also works well as a household cleaner too!

StellarClean (Powerful Brewery Wash PBW) is a buffered alkaline detergent that has been proven to be more than an effective substitute for caustic soda cleaners. Because of its unique formulation of buffers and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminium, and on plastics. StellarClean uses active oxygen to penetrate carbon or protein soils and is not effected by hard water.

StellarClean has been formulated as a C.I.P. cleaner and is very effective in removing protein soils found on brew kettles, fermenters, conditioning tanks, filters and all packaging areas. The concentrations to remove these soils are typically in the 1% range. However, due to soil and water conditions this concentration will vary. To help in hard water areas StellarClean has been formulated with enough chelators to tolerate hard water over 17 grains.

StellarClean is an excellent choice as a soak cleaner because it does not require excessive heat as do most caustic based cleaners. This product has cleaned brass and copper filters, and industrial aluminium surfaces successfully.

Many brewers just use pure sodium percarbonate, however this as a single ingredient is not effective across a wide range of soiling. As a result if you repeatedly use 100% sodium percarbonate you will eventually start to notice a build up of grime, scale, oils which sodium percarbonate alone is not effective against. As a result we recommend this product. StellarClean is effective across a wide range of soiling and contains 8 active ingredients to tackle a wide range of compounds. This ensures your cleaning performance is maintained irrespective of how hard/soft your water is and also what your fermenter contains.

So for a superior formulation that has specifically been made for the beverage industry you really can't go past this very effective cleaning product.

Ingredients:
Ionic Surfactants 40%, Sodium Peroxycarbonate 35%, Sodium Silicate 25%.

From: Kegland

StellarSan Sanitiser 500mL - 100% Food Grade non-rinse sanitiser that can be diluted to 333L with the dual chamber mixing bottle compartment. Simply twist off the small measuring compartments lid, squeeze the bottle and it will start to fill that chamber only.

Even when you're finished sanitising your products in a bucket for example, you can still re-use the sanitiser over and over again. Making it a no brainer for your brewing sanitising needs and the cost to you is greatly reduced. 

The new and improved phosphoric acid blend provides a unique microorganism killing system, unaffected by organic soils and delivering a high foaming formulation with optimum coverage and penetration. It is perfect for sanitising your brewing equipment and surface areas. Not suitable for use on wood, unglazed porcelain or other porous materials. It is also not suitable for use on soft metal such as aluminium, copper or brass.

Please note that foam is okay! Pour your wort directly onto the foam as this is a foaming non-rinse formulation. The formula can be metabolised by the yeast and will act as a nutrient assisting yeast growth. Follow this procedure and it will not impart any off-odours or flavours.

Unlike other harsh chemical sanitisers, StellarSan is non-staining, and stable over a wide range of temperatures.

Phosphoric acid, which is in this formulation, also helps keep your stainless in good condition and will improve the stainless properties. 

Use at a dilution rate of 1.5ml per litre.

A submersible pump, 2000L/H, 3.2m head, which is the same as what is supplied with the Bucket Blaster, if you need a replacement. 

From: Kegland