A replacement screw cap for the 5L Demijohn with Screw Cap.

A 5 litre glass jar suitable for small fermentations and the storage of spirits.

A Demijohn Bored Bung fits the opening of the jar perfectly enabling an airlock to be attached.

Add a Swing Lid or use a Demijohn Solid Bung as a stopper.

The Easy Syphon 3/8 Inch and Easy Syphon 350mm are both compatible with this demijohn.

Note: The handle and shape of the Demijohn may vary.

This 5 litre glass demijohn is perfect for small fermentations (4.5 litre / 1 gallon), the storage of spirits, and the aging/conditioning of wine or mead.

The Bung with hole #9.5 - 38mm-46mm  or Bung - Bored - 37-45mm - Silicone fits perfectly to enable an airlock to be attached so the Demijohn can be used as a fermenter.

Compatible with both the Easy Syphon 350mm and the Easy Syphon 3/8 inch.

Standard S shape airlock for sealing your fermenter.

Please note that your fermenter will need an airlock grommet or top hat grommet (sold separately) to attach the airlock to most fermenters.

May not include red cap, depending on supplier.

The three piece airlock is a great choice for monitoring fermentation and stopping contaminant’s entering your fermenter.  Easy to fill and disassembles for superior cleaning and sanitation.

Fill with water to the indicator line and insert in drilled stopper or bung to vent gases during fermentation. Includes body, piston, and vented cap. 

This airlock is slightly shorter than the Standard S Shape Airlock.

Please note that your fermenter will need an airlock grommet or top hat grommet (sold separately).

The Airlock - Vintage Bubbler is an essential tool for home brewing fermentation. Designed to allow gases to escape while preventing outside air and contaminants from entering, it helps maintain a clean and controlled environment. 

Please note that your fermenter will need an airlock grommet or top hat grommet (sold separately) to attach the airlock to most fermenters.

Auto Syphon Racking Cane Easy Jiggler - 304 Stainless Steel - for syphoning out of a carboy, demijohn, bucket or FermZilla.  This siphon includes 150cm x 10mm ID silicone tube.

This whole assembly is plasticiser and BPA free.  It will not break like the plastic auto syphons or polycarbonate designs. 

It's made robust out of 304 grade stainless steel and is really easy to take apart for cleaning.  It's more versatile than a conventional racking cane and easier to start but at the same time similarly simple to use and clean.

Forget about fermenter taps and use a syphon.  Threaded fermenter taps are hard to clean and sanitise so having a fermenter without a tap is often the best choice, and to get the beverage out of the fermenter without a tap this siphon is the natural choice.

INSTRUCTIONS
1: Sanitise and rinse your syphon
2: Make sure you have the full vessel significantly above the empty vessel you are filling
3: Attach the curved syphon to the hose
4: Submerge the end of syphon into your full container.
5: With long swift strokes, shake the syphon tube up and down to start the syphon action

Length: 57cm
Stainless tube: 14mm OD x 12mm ID
Silicone Tube: 1.5m x 10mm ID 
From: Kegland

A bored bung that tapers from 26mm across the top to 19mm across the bottom. Fits the Mangrove Jacks 25L Stainless Steel Fermenter.

A bored silicon bung for use with an airlock. It is 38mm at the top tapering down to 25mm at the bottom.

Garden Hose Female x Grip Hose Connector 12mm / 1/2" Coupling

These easy to use garden hose quick connector couplings are really handy for connecting your hose to a female hose adaptor.

Specifications:

• Brass Construction
• Fits most male garden hose fittings
• 12mm ~ 1/2inch Barb with compression grip fitting
• Includes rubber washer so no teflon tape needed

From: Kegland

Pro Sight Glass Distillation / Steam Condenser Lid

Suits Gen 4 and Gen 3 BrewZillas, Digiboils and older model Robobrews, for both 35L and 65L models.

Designed to be extremely sturdy when using heavier stills or off-centre steam condenser units. Now you can watch your wash boil and see if it's foaming or about to puke. If you are brewing beer indoors you may want to use a steam condenser lid set, without having to take off the entire lid to do hop/salt additions, simply remove the 3" Sight Glass and throw in (take care when hot).

PPSU is an excellent choice for components that are exposed to high temperatures (up to 200°C) and corrosive media due to its exceptional chemical resistance. As well as being extremely impact resistant.

We have decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. This will allow us to injection mold intricate parts that would have been near impossible to do in stainless steel or lab-grade glass. Because this is a very unique type of plastic, it comes at a much higher cost per kg than other industrial plastics. So much so that it costs more than stainless steel.

Do you want to brew indoors but don't want the roof to get all sticky? 

Specifications 35L
- Thicker Silicone O-Ring for a tighter seal
- 2 Inch Tri-clover Top Ferrule Port
- 3 Inch Sight Glass Ferrule
Includes 3 Inch PPSU Sight Glass Disc, 3 Inch Tri-Clover Clamp and 3 Inch Tri-Clover Silicone Seal.

Specifications 65L

- Thicker Silicone O-Ring for a tighter seal
- 4 Inch Tri-clover Top Ferrule Port
- 3 Inch Sight Glass Ferrule
Includes 3 Inch PPSU Sight Glass Disc, 3 Inch Tri-Clover Clamp and 3 Inch Tri-Clover Silicone Seal.

This unit has been designed to be used with the DigiBoil and BrewZilla. We do not have data on other branded boilers if their clamps are suitable to make a complete seal.

From: Kegland

A bored silicone bung with a 37-45 mm taper. Fits 5L Demijohn with Screw Lid.

A solid silicone bung with a 37-45 mm taper. Fits 5L Demijohn with Screw Lid.

A bung with a diameter of 46mm across the top, tapering to a diameter of 38mm across the bottom.

Fits the 5L Glass Jar Demijohn with Screw Cap/Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.

A solid bung with a diameter of 46mm across the top, tapering to a diameter of 38mm across the bottom.

Fits the 5L Glass Jar Demijohn with Screw Cap/Lid perfectly.

A 71cm carboy and fermenter stirrer/paddle.

Thin knitted copper mesh (99.9% Cu) sock open at both ends and 120mm wide. 

Sold by the metre

Essential for all alcohol stills.

The CCC  uses a specially manufactured pure copper micro ribbon which has a large surface area to instantly react with the sulphates turning them into odourless, tasteless compounds. This action neutralises the rubbery cabbage odour which taints the spirit.

Clean after each distillation.

The Demijohn Handle makes it easier to move your full Demijohn/Carboy, reducing the risk of spillage.

It works with both the 23L Carboy and 11.5L Carboy.

A silicon bung with a diameter of 34mm across the top, tapering to a diameter of 26mm at the bottom.

Fits the 5L Glass Jar Demijohn with Mecanicco Swing Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.

Does not fit the 5L Glass Jar Demijohn with Screw Cap/Lid.

A solid silicon bung with a diameter of 32mm across the top, tapering to a diameter of 28mm at the bottom.

Fits the 5L Glass Jar Demijohn with Mecanicco Swing Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.

Does not fit the 5L Glass Jar Demijohn with Screw Cap/Lid.

Digital instant read thermometer with folding probe.

A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking lamb roast on the bbq! With a range of -50°C to 300°C you will be hard-pressed not to get a temperature reading.

Specifications:

• Range: -50°C ~ 300°C / -58°F ~ 572°F
• Resolution: 0.1°C
• Temperature Error: +-1°C (0~100°C)
• Power Supply: AG13 button battery x 1 (included)

Functions:

• ON/OFF
• °C/°F
• HOLD

From: Kegland

Electronic scales for measuring additions such as brewing salts and hops (0.1g to 1000g).

Adjusting your pH with brewing salts has never been easier than with this tiny pocket rocket scales. Flip the lid and get weighing because we wouldn't start brew day without one. 

Specifications:

• Powered by 2 AAA batteries (batteries not included)
• Durable and compact digital pocket scale for easy portability
• Weighs items up to 1000 grams in 0.1 gram increments
• Easy-to-read, backlit LCD display; intuitive, flip-open lid protects the smooth, stainless-steel weighing surface

From: Kegland

Made of highly accurate sensors, the 40kg Home Brew Digital Scale is your best companion prior to your brew day routine. Don't take the small kitchen scales that are hard to read with a giant bucket on it. Get yourself some serious scales for some serious business!

It runs on a rechargeable battery which means you can use it anywhere you like. The battery is fully charged within 2 hours and can run up to 140 hours just from a single charge.

NOTE: All scales used for commercial purposes are required to be calibrated.
Over charging for more than 2 hours can lead to battery failure, whereby the unit would have to be wired to turn on.

Specifications:

• Power: AC or rechargeable battery
• Voltage: 220v 50Hz/60Hz
• Battery required: 4V 6AH recharge battery
• Capacity: 40kg
• Increment: 1g
• Precision: 1/3000F.S
• Display windows: Weight (5 digits), Unit price (5 digits), Total Price (6 digits)
• Platform size: 33.5x23.5cm
• Product size: 34x33x8cm
• Colour: Black (unbranded)
• Battery: 4v Lead Acid Battery (Charge for two hours at a time, do not over charge)

From: Kegland

A smaller (shorter) 350ml syphon. Perfect to use with smaller fermenters.

The Tubing - 9.5mm ID fits snugly over the racking tube.

Compatible with the 5L Glass Jar Demijohn and 5L Glass Jar Demijohn with Screw Cap/Lid.

Replacement Spindle for the Still Spirits EZ Filter.

Replacement in line spindle Still Spirits EZ Inline Filter.