Sort by:
Transform the G40 or G70 Brewing System into a home distillery with the G40 & G70 Distilling Lid. This lid features an industry standard 4” tri-clamp opening to allow for the connection of the Still Spirits T500 Reflux and Alembic Condensers, as well as third-party distilling equipment. Note: We will be launching Accessory Attachment Kits for the T500 Reflux and Alembic Condensers in the first quarter of 2023.
Features:
-
304 Grade Stainless Steel Construction
-
Standard 4” tri-clamp opening (industry standard)
-
Pressure relief valve
-
Barrel clamp locking mechanism
The G40 & G70 Distilling Lid plus the complete set of fittings to connect the T500 Reflux Condenser (stainless steel or copper) to either the G40 or the G70 for reflux distilling.
The ultimate bundle to pair with the T500 Reflux Condenser stainless steel or copper), allowing you to turn your G40 or G70 Brewing System into an all-in-one automated brewing system that can also be used for reflux distillation. Bundle includes the G40 & G70 Distilling Lid plus the T500 Reflux Condenser Attachment Kit so you can brew high quality beer and distill neutral spirits.
INCLUDES
- G40 & G70 Distilling Lid
- Standard 4" tri-clamp opening (industry standard)
- Pressure relief valve
- Barrel clamp locking mechanism
- 2” to ½” (48mm) DN40 Thread Adapter
- 2” Tri-Clamp Seal with Mesh
- 2” Tri-Clamp
- 4” to 2” Tri-Clamp reducer
- 4” Tri-Clamp Seal
- 4” Tri-Clamp
- 304 Grade Stainless Steel Construction
Note: T500 Reflux Condenser sold separately
A complete set of fittings to connect the G40 & G70 Distilling Lid to the Still Spirits T500 Alembic Condenser for pot distilling.
The G40 or the G70 paired with the Distilling Lid and T500 Alembic Condenser Attachment Kit offers an all-in-one automated brewing system that can also be used to for pot distillation, making it the ultimate combo to brew high quality beer and distill whiskey, bourbon, rum, and more.
INCLUDES
- 4” Tri-Clamp
- 4” Tri-Clamp Seal
- 4” to 2” Copper Alembic Helmet
- 2” Tri-Clamp
- 2” Tri-Clamp Seal
- 2” to ½”(48mm) DN40 Thread Adapter
- Condenser Silicone O-Ring
FEATURES
- 304 Grade Stainless Steel Construction
- Copper Helmet to Aid in Reduction of Sulphur Compounds and Retention and Development of Flavour
Note: Distilling Lid & Still Spirits Pot Still Alembic Copper Condenser sold separately.
A complete set of fittings to connect the G40 & G70 Distilling Lid to the Still Spirits T500 Reflux Condenser (stainless steel or copper) for reflux distilling.
The G40 or the G70 paired with the Distilling Lid and T500 Reflux Condenser Attachment Kit offers an all-in-one automated brewing system that can also be used for reflux distillation, making it the ultimate combo to brew high-quality beer and distill neutral spirits.
INCLUDES
• 2” to ½” (48mm) DN40 Thread Adapter
• 2” Tri-Clamp Seal with Mesh
• 2” Tri-Clamp
• 4” to 2” Tri-Clamp reducer
• 4” Tri-Clamp Seal
• 4” Tri-Clamp
• 304 Grade Stainless Steel Construction
Note: Distilling Lid and T500 Reflux Condenser sold separately
A bored silicone bung for the Grainfather GF30 and SF70.
Measures approximately 41mm across the top, tapering to approximately 35mm across the bottom.
A 1 gallon (3.8 litres) wide-mouth glass jar with a plastic screw top lid. Ideal for steeping, macerating, or ageing spirit.
Could also be used as a small fermenter by making a small hole in the lid and adding a top hat grommet and airlock.
Dimensions
- Diameter: 155mm approx.
- Height: 260mm approx.
- Mouth Diameter: 100mm approx.
Handcraft Supplies 10L Fermenter with Lid & Grommet is perfect for brewing up to 9 litre batches of wine, beer, cider, or other fermentation.
Comes with a lid pre-fit with a grommet, ready for an airlock. Stackable and made from food-grade plastic with litre markings on the side so you can easily see how much to top up to. Comes with a sturdy plastic handle for easy transportation.
A solid plastic fermenting barrel with screw top lid, airlock hole, and one litre markers down the side.
Please note that you will also need to order an airlock, airlock grommet and tap if you want a complete fermenting barrel.
Dimensions: approx. 525mm high x 300mm diameter
Handcraft Supplies 5L Fermenter with Lid & Grommet is perfect for brewing up to 4.5 litre batches of wine, beer, cider, or other fermentation.
Comes with a lid pre-fit with a grommet, ready for an airlock. Stackable and made from food-grade plastic with litre markings on the side so you can easily see how much to top up to. Comes with a sturdy plastic handle for easy transportation.
A 60 litre plastic carboy/barrel fermenter suitable for fermenting beer, cider, wine, or spirits.
You may also require:
The Handcraft Supplies Fermentation Equipment Kit contains the essential equipment you require for your fermentation needs. Whether you're making beer, cider, wine, or a wash for distilling, this kit enables you to get your fermentation underway and completed successfully. All you need are your ingredients and a suitable cleaner and sanitiser.
Designed for 23 litre batches. Simply assemble, sanitise and add your ingredients.
This kit is made up of:
30L Fermenter + Lid
Stick-on Thermometer Strip
Bubbler Airlock
Grommet
Tap
Plastic Spoon
Hydrometer
Handcraft Supplies fermenter set containing a 30L bucket with lid and accessories, ready to ferment. Includes litre markers down the side. Use for primary or secondary fermenter, or even as a bottling bucket.
This kit is made up of:
Stick-on Thermometer Strip
Bubbler Airlock
Top Hat Grommet
Sediment Reducer
Tap
30L Fermenter + Lid
A brewing heater belt that fits around your fermenter to provide steady and constant warmth for your brew. The 30 watts will gently warm without creating a hot spot, and can be moved up or down the fermenter to increase or decrease the heat transfer to the brew.
To further control the temperature of your fermentation, combine with a RAPT Temperature Controller or similar to regulate the heater belt automatically.
Note: fermenter not included.
From: Kegland
Fermentation Heating Wrap Belt - With Velcro Strap (30watts) 220-240VAC (50-60hz)
Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty.
Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile.
To further control the temperature of your fermentation, combine with a RAPT Temperature Controller or similar to regulate the Heating Wrap Belt automatically.
Features:
- Easy to use
- Handy velcro strap
- Low watt density
- Durable vinyl coating
- 30 watt gentle heating
- Great for fermenters or bottle conditioning
- Sit on top or wrap around your fermentation vessel
Dimensions: approx. 1000mm x 250mm
From: Kegland
30mm Hoffman Clamp - Stainless Steel.
Hoffman Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow.
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing.
This can be particularly useful when using a liquid management still.
Size: 30mm
From: Kegland
Infrared Thermometer Gun -50C to +580C (Black)
This thermometer gun has a built-in Dual laser that can be switched On and Off. Dual laser is an important feature when choosing infrared thermometers because it allows for much higher accuracy of readings. When measuring an object a Dual Laser will help greatly in finding the convergence point of the measured target and the spot ratio, which can only be achieved with Dual Laser.
Features:
- Double Laser pointer for accurate target aiming
- Simple one-handed operation
- Laser ON/OFF Switch
- Low battery indication
- LED backlight system for operation under poor illumination
- C° / °F temperature unit conversion
- Automatic Power off in 15 seconds without any operation
- Display hold, scan function
Note:
1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly.
2. If you want to use boiled water to measure the quality of the product, please note that when measuring boiling liquids, do not allow smoke or water vapour to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.
Specifications:
- Temperature Range: -50 to 550°C
- Accuracy: ± 2% or 2°C
- Distance Spot Ratio: 12:1
- Emissivity: 0.1~1.0(Adjustable)
- Response Time Wavelength: 500ms & (8-14) um
- Repeatability: ± 1% or 1°C
- Resolution: 1°C or 1°F
- Storage Temperature: -20-50°C
- Operating Temperature: 0-50°C
From: Kegland
Lid pre-fit with grommet for Handcraft Supplies 10L Fermenter. Stackable and made from food-grade plastic.
Lid pre-fit with grommet for Handcraft Supplies 5L Fermenter. Stackable and made from food-grade plastic.
Food grade plastic lid pre-fit with grommet for Handcraft Supplies 30 L Fermenter.
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits.
Heat Pad SpeCraft Series:
- Provides low, constant heat where it is needed for fermentation.
- Aids yeast activity and helps avoid stuck fermentation.
- Inexpensive to run.
- Voltage: 220-240V
- Power: 25W
- Colour: White
100mm silicone tube for connecting the 30 L Wide Mouth Fermenter Tap to a brew bottler for straight forward transfer. Made with food grade silicone.
Made from lightweight muslin, this bag is perfect for hops additions or for holding botanicals when making gin.
Measures approximately 38cm in length and 10cm in width
Premium quality pH solutions from Hanna Instruments for calibrating your pH meter. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
Usually available for these pH levels: pH 4.01, pH 7.01
Reported values are accurate to +/- 0.01 pH at 25°C.
From: Hanna Instruments
Size: 500ml
A replacement lid for the Plastic Barrel Fermenters. Fits both 30L and 60L fermenters.
A 12L plastic bucket fermenter set with tap that is perfect for small batches.
Dimensions (approx.): 410mm x 250mm
Kit contains the following:
- 12L Clear Fermenter Body with side hole (20mm - 23mm)
- 12L Blue Fermenter Lid
- EZ Filter - Still Tap (Boil proof)
These are great to use for wine and beer making but are also good storage containers for spirits.
The Rubber Stopper #10 fits the carboy perfectly.
A 23 litre plastic carboy (bottle) suitable for fermenting beer, cider, wine, or spirits.
The Rubber Stopper #10 fits this carboy.
This 5L Plastic Carboy is made from alcohol-safe plastic and includes a lid. These are great for fermenting meads, cider, wine and spirit wash or as storage containers for spirits.
3 x Quality hose connectors to fit your Pure Distilling condenser snap on hose fittings or other hose fittings.
Gen2 - 2400W Power Station 240V - Power Controller
The new and improved Generation 2 - 2400 watt Power Controller. Suitable for homebrewers, distillers and any other means of power wattage adjustment up to 2400 watt (standard 10 amp). If you do not know if your electrical device can be reduced in power without failing, contact the manufacturer or an electrician.
We highly recommend using this product with our 2200w Weldless Element. We do not recommend plugging this unit into anything higher than a 10amp plug. Therefore you cannot use a 3600w tri-clamp element with this unit. We should also point out that if you do use this on a BrewZilla or Digiboil, that you will only be able to reduce 10-30% worth of power before the display turns off. Once the display turns off, so do the elements.
Please note; we recommend using x1 element only per Power Station Controller. If you are looking to use multiple, please ensure you have multiple Power Controllers on different circuits. If you are unsure please ask an electrician or trained professional. DO NOT EXCEED 2400W WITH THIS CONTROLLER!
From: Kegland
The mesh pieces supplied in this pack have the specifications of all being 30g +/- 1g, to ensure that the correct packing density is achieved in the column. They have been stretched and manipulated to break short strands to ensure even distribution and compaction in the condenser.
A robust thermometer/timer that allows you to set an alarm for a certain temperature.
No more need to watch the thermometer.
Yellow RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth).
The RAPT Pill allows true real-time specific gravity and temperature logging and control via wifi/bluetooth integration with the RAPT fermentation chamber, RAPT mobile app or RAPT IOT.
The RAPT Pill allows you to instantly read and log the specific gravity and temperature of your fermentation via the RAPT mobile app on your compatible Android smartphone or tablet, Apple iPhone/iPad or via the RAPT IOT hub on your Windows or Mac Computer.
The RAPT Pill has a long battery life and can last 2-5 months between charges when utilising Wifi. If only using Bluetooth the the battery can last 2+ years before needing to be recharged. The RAPT Pill has a USB-C charging port on the circuit board allowing fast charging from any USB-C cable. Alternatively you can purchase the Wireless Charging Kit so you charge your pill without needing to take it apart.
The RAPT Pill is universal and is compatible with most standard carboys, cornelius kegs, stainless steel fermenters and pressurisable fermenters.
Pill Housing Design
The RAPT Pill housing boasts many advantages compared to other wireless hydrometers such as:
- Made from strong BPA Free Tritan Plastic
- Greater ergonomics - The shape of the RAPT Pill has been designed for improved usability compared to other wireless hydrometers such that the Pill seperates into two pieces at the midline of the Pill rather than requiring a difficult to remove end cap to be unscrewed.
- Sanitary design - The RAPT Pill has no exposed thread and a double o-ring seal which allows for a water-tight seal with reduced risk of infection.
- Less susceptible to error - The larger housing of the RAPT Pill compared to other wireless hydrometers means that the gravity logging is less susceptible to error from krausen, hops or CO2 bubbles from fermentation.
Different housing colours are sold separately, allowing customisation of your RAPT Pill.
Specifications:
The RAPT Pill is approximately 37mm x 125mm - compact enough to fit almost anywhere!
What is RAPT?
The RAPT IOT Hub is a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notification in the off instance that something doesn't go to plan.
There is no limit to the number of RAPT devices you can connect the RAPT IOT Hub. This is in contrast to other popular wireless hydrometers where you are limited by the number of hydrometers you can connect to an app.
