Sort by:
A 10 inch filter housing for filtering your beer prior to bottling or kegging, or to filter water.
For beer this filter works best when used when transferring cold uncarbonated beer. All you will need to do is purchase some hosing, clamps, ball locks (if transferring to or between kegs) and a 1 Micron Filter to use this system.
- Clear high pressure housing
- Purge valve to expel air pockets
- ½” BSP inlet and outlet
- Includes Duotight 9.5mm (3/8"") fittings
- Brass threaded ports for durability
- Compatible with other 10” filter systems
Note: you will need tubing to match the fittings (not included).
You will need a filter insert to use this system, like our 1 Micron Washable Filter (for filtering beer) or a 0.5 Micron Carbon Water Filter, (for water filtering).
Not suitable for hot liquids.
Features:
- 0.5 micron nominal filtration
- Cyst reduction (Giardia, Cryptosporidium)
- Turbidity reduction
- Chlorine taste and odor reduction
This fits our 10 inch beer filtering system.
Note: brand may vary.
This fits our 10 inch beer filtering system.
Note: product may vary from photo shown.
A rugged and durable push fit, inline filter strainer.
Available in both 8mm and 10mm push fit size.
The detachable cap and body allow for easy servicing and cleaning.
Do not apply excessive vibration, torque, shock or other strong loads to the filter as the filter body may damage or collets may be dislocated.
Filter grade: 100 mesh
Colour: Black
Max. Pressure: 170psi
Temperature: Air -20C, Liquid 65C
Height: approx. 70mm
Replacement filter screens for Mac Daddy Bouncer Inline Filter.
Contains:
- one blue 50-mesh screen
- one white 80-mesh screen
The Bouncer Inline Beer Filter allows you to brew better tasting and clearer beer, with less waste, and without pumps or additives! Simply connect the filter between your fermenter and keg, or between your boil kettle and fermenter.
Perfect for up to 25 L batches.
Key features
-
improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins,
-
built to last, use it over and over, custom molded from high quality thermoplastic and T304 stainless steel in the USA, use up to 65℃,
-
easy to use and clean, gravity fed so no need to pressurise or pump, fewer parts to clean and sanitise, fits 3/8" inner diameter siphon tubing (standard size),
-
doubles as a mini-Randall, simply attach to a growler filler and add fresh flavours into the glass, try citrus peels for a lighter beer, or cracked coffee for a stout.
Specifications
Connectivity: 3/8″ hose barbs
Screen: 915 micron / 20 mesh
Filter Area: 4,974 square mm / 7.71 square inches
Max Operating temperature: 65C / 150F
Max Operating pressure: up to 150 psi at 21 C / 70 F
Similar to the Classic Bouncer Inline Beer Filter - but BIGGER. The Mac Daddy Bouncer has 224% more filter surface area, and three times the flow rate of the regular Bouncer.
Key features
-
the Bouncer's big brother, with more filter area and a higher flow rate - use on your big hoppy batches,
-
improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins,
-
built to last, use it over and over, custom molded from high quality nylon and T304 stainless steel in the USA, use up to 65℃,
-
easy to use and clean, gravity fed so no need to pressurise or pump, fewer parts to clean and sanitise, fits 3/8" inner diameter siphon tubing (standard size),
-
doubles as a mini-Randall, simply attach to a growler filler and add fresh flavours into the glass, try citrus peels for a lighter beer, or cracked coffee for a stout,
-
the Mac Daddy has 1/2" female pipe thread ports to adapt easily to standard 1/2” fittings. Use the included 3/8” or 1/2” hose barb adapters, or add your own quick-connect adapters to fit your set up. Use your Mac Daddy Bouncer out of the brew kettle, out of the fermenter, or out of your serving tap.
Specifications
Connectivity: 1/2″ NPT female, 1/2″ hose barbs, 3/8″ hose barbs
Screen: 915 micron / 20 mesh
Filter Area: 11,161 square mm / 17.3 square inches
Max Operating temperature: 65C / 150F
Max Operating pressure: up to 100 psi at 52 C / 125 F
Replacement filter screens for Classic Bouncer Inline Filter.
Contains:
- one blue 50-mesh screen
- one white 80-mesh screen
It's the Bouncer Classic and Mac Daddy's big brother, the Bouncer Pro - a pro level inline beer filter. The Pro filters out dry hops, fruit, yeast, etc during transfers or kegging to produce better tasting and clearer beer. Multiple Pros can be easily used in series (coarse then fine screens) or parallel (for faster flow rates). Very easy to clean compared to frame and plate filters. Doubles as an infuser.
The Pro comes with a Red 20 mesh (915 micron), Blue 50 mesh (304 micron), and White 80 mesh (178 micron) screen, stainless steel tri-clamp adaptors, and a roll of pipe thread tape.
Key features
-
Pro level inline beer filter
-
Filters out dry hops, fruit, yeast, etc during transfers or kegging to produce better tasting and clearer beer
-
Multiple units can be easily used in series (coarse then fine screens) or parallel (for faster flow rates)
-
Very easy to clean compared to frame and plate filters
-
Doubles as an infuser
-
improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins,
-
doubles as a mini-Randall, simply attach to a growler filler and add fresh flavours into the glass, try citrus peels for a lighter beer, or cracked coffee for a stout,
Specifications
Connectivity: Stainless steel 1.5 inch tri-clamp and 1″ NPT female
Screens: Red 20 mesh (915 micron), Blue 50 mesh (304 micron), and White 80 mesh (178 micron)
Filter Area: 29.73 square inches (19,181 square mm)
Max operating pressure: up to 150 psi at 21 C / 70 F and 100 psi at 52 C / 125 F
Weight: 1 pound, 8 oz. / .69kg (with try-clamp adaptors and white screen)
Accessories included: Stainless steel tri-clamp adaptors, roll of pipe thread tape, three screens (see above)
These 0.2 micron Air Filters have a fine enough filter membrane that they can filter out microbes and bacteria.
They can be used with any oil free air compressor such as a pond pump, or other type of pump.
These can also be used as an airlock in the top of your fermenter, or to filter air going back into a cask when dispensing real ale.
This filter is not suitable for liquids and should be discarded if it gets wet.
Barb diameter measures approximately 9mm - 9.5mm.
Replacement Gaskets for Bouncer Classic.
Replacement Gaskets for Bouncer Mac Daddy.
Replacement Gaskets for Bouncer Pro.
Hose adapters for the Bouncer Filter Mac Daddy.
- Two 3/8″ hose barb adaptors
- Two 1/2″ hose barb adaptors
