Sort by:
Digital instant read thermometer with folding probe.
A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking lamb roast on the bbq! With a range of -50°C to 300°C you will be hard-pressed not to get a temperature reading.
Specifications:
- Range: -50°C ~ 300°C / -58°F ~ 572°F
- Resolution: 0.1°C
- Temperature Error: +-1°C (0~100°C)
- Power Supply: AG13 button battery x 1 (included)
Functions:
- ON/OFF
- °C/°F
- HOLD
From: Kegland
Infrared Thermometer Gun -50C to +580C (Black)
This thermometer gun has a built-in Dual laser that can be switched On and Off. Dual laser is an important feature when choosing infrared thermometers because it allows for much higher accuracy of readings. When measuring an object a Dual Laser will help greatly in finding the convergence point of the measured target and the spot ratio, which can only be achieved with Dual Laser.
Features:
- Double Laser pointer for accurate target aiming
- Simple one-handed operation
- Laser ON/OFF Switch
- Low battery indication
- LED backlight system for operation under poor illumination
- C° / °F temperature unit conversion
- Automatic Power off in 15 seconds without any operation
- Display hold, scan function
Note:
1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly.
2. If you want to use boiled water to measure the quality of the product, please note that when measuring boiling liquids, do not allow smoke or water vapour to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.
Specifications:
- Temperature Range: -50 to 550°C
- Accuracy: ± 2% or 2°C
- Distance Spot Ratio: 12:1
- Emissivity: 0.1~1.0(Adjustable)
- Response Time Wavelength: 500ms & (8-14) um
- Repeatability: ± 1% or 1°C
- Resolution: 1°C or 1°F
- Storage Temperature: -20-50°C
- Operating Temperature: 0-50°C
From: Kegland
A reusable finely-woven cloth of 90 thread per inch 100% cotton. It's used in place of cheese cloth, which is too wide a weave for some cheese recipes. 900mmx900mm
These tiny measuring spoons are great for when required to measure out tiny amounts of culture and/or enzymes.
Tad is approx. 1/4 tsp, Dash is approx. 1/8 tsp, Pinch is approx. 1/16 tsp, Smidgen is approx. 1/32 tsp, Drop is approx. 1/64 tsp.
This knife is specialised to carefully cut delicate curd without tearing when making cheese. The long blade makes it very easy to cut right down to the bottom of deep pots and cheese vats.
A slatted plastic mat that fits into the Mad Millie Cheese Vat, this cheese mat is a must have for draining, drying, and ageing your homemade cheeses to perfection. You'll find this mat is used in most of the Mad Millie cheese recipes.
BPA Free plastic
Dishwasher safe
22cm L x 15.2cm W x 6mm H
This is included in the Artisan Cheese Kit. Used for pressing your home made hard cheeses in an accurate and reliable manner. It is made from a special food grade plastic that is easily cleaned and does not absorb bacteria. It comes with a 2 litre hard cheese mould, fitting curds from 6 litres of milk, a press and pressure gauge.
Used for accurately measuring very small quantities of liquid. Place pipette in the desired liquid, pinch the pipette's bubble end to create suction & and control the amount of liquid extracted. Wash & sterilise pipette before and after use.
Stainless steel thermometer with a clip to attach to your pot when cheese making. When using the thermometer, make sure the two indentation points on the lower half of your thermometer are fully submerged in the milk to make sure the thermometer is providing an accurate reading.
Thermometer With Clip - a multi-purpose thermometer you can use when brewing beer, heating milk for cheese making, or frothing milk for coffee.
This Thermometer With Clip has a long stem and a clip that you can use to attach the thermometer to the side of your equipment.
The thermometer is made of stainless steel that is durable and corrosion-resistant. The dial is large which makes it easy to note the reading.
Probe length: 125mm
Temperature range: 0℃ - 110℃
From: Krome Dispense