Sort by:
Tri-Clamp Cap to Ball Lock Post fitting, with both liquid and gas post options. These 1.5" tri-clamp fittings provide a sanitary and leak-proof connection, and can be used with our ball lock connectors. The price is per single unit - gas or liquid - not for pair like in the photos.
From: Krome Dispense
Material: Stainless 304
Standard 2" tri-clamp compatible with Grainfather GF30 Conical Fermenter Dual Valve as well as G40/G70 distilling attachments.
A 2 inch to 1.5 inch tri-clamp concentric reducer for your brewing set up.
From: Kegland
- 1.5" tri-clamp to 1/4" Male Threaded Flare Fitting
- 304 Stainless Construction
- Keg Directly from a Brite Tank
- Serve Directly from a Brite Tank
From: Ss Brewing Technologies, USA
A 1.5 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 1.5 Inch Bubble Plate to the 1.5 Inch Sight Glass.
Note: This is not the same seal as a standard 1.5″ Tri-Clamp seal.
A 1.5" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 1.5 inch silicone tri-clover/tri-clamp seal.
A 2 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 2 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 2 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 2 Inch Bubble Plate to the 2 Inch Sight Glass.
Note: This is not the same seal as a standard 2″ Tri-Clamp seal.
A 2" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 2 inch silicone tri-clover/tri-clamp seal.
A 304 stainless steel 2 inch -4 inch Tri-clover adaptor.
A 4 inch Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 4 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 4 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 4 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 4 Inch Bubble Plate to the 4 Inch Sight Glass.
Note: This is not the same seal as a standard 4″ Tri-Clamp seal.
A 4 inch silicone tri-clover/tri-clamp seal.
A 1.5 inch triclover sightglass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
- Dimensions: 15cm × 18cm × 11cm
A 304 stainless steel tri clover fitting that will allow you to connect 1.5″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.
Bulkhead fits hole approximately 42mm in diameter.
A 2 inch tri clover sight glass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
- Dimensions: 15cm × 18cm × 11cm
A 304 stainless steel tri clover fitting that will allow you to connect 2″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.
Bulkhead fits hole approximately 53mm in diameter.
A 4 inch tri clover sight glass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
This is a low watt density warming wand to be used on a fermenter to maintain warmer yeast profile temperatures in the colder months of the year.
- 125watt
- 1.5" Tri-Clamp
From: Kegland
Stainless steel adjustable Worm Clamp. These are great for gas or beer lines, or tubing on wort chillers.
Sizes:
- 3/16" (4.76mm) to 5/16" (7.94mm)
From: Krome Dispense
High quality full stainless steel (304) worm drive hose clamps. Great for clamping beer and gas line as well as any other tubing.
Features
- Slotted hex head screw
- Full stainless steel, including screw (W4)
Available sizes:
- 8mm - 12mm
- 10mm - 16mm
- 12mm - 20mm
- 16mm - 25mm
