BREW ON A GRAINFATHER, BREWZILLA, OR GUTEN

ATF South Pacific IPA

$71.90

Post Boil Batch Size

Quantity

19 in stock

The ATF South Pacific IPA’s aroma is bright and lifted, offering distinct notes of tangelo, fresh lime zest, ripe apricot and peach, underscored by a subtle hint of pine and a gentle resinous depth. A clean malt character provides a light foundation, carrying just a whisper of golden sweetness that supports the hops without competing for attention.

On the palate, the beer is smooth and medium-bodied, leading into a wave of stone fruit and citrus. A firm, assertive bitterness (58 IBU) arrives on the finish, drying the palate and leaving a crisp, refreshing impression of grapefruit pith and resinous pine.

Yeast is not included in the kit. We recommend using Lallemand Nottingham High Performance Ale Yeast, or Froth Buddy (Assumed Origin: Sierra Nevada), or Lallemand's BRY-97 West Coast Ale Yeast. You could also try Safale US-05, or Mangrove Jack's West Coast Yeast.

The Details

Target Original Gravity

1.055

Target Final Gravity

1.009

Target ABV

6%

Target Colour (SRM)

5.8

Target IBU’s

58

Grain (milled or unmilled)

Gladfield American Ale
Toffee
Light Crystal
Sour Grapes (depending on source water)

Hops

Southern Cross
Waimea
Wai-iti

Yeast Recommendation

Yeast

Pkts

Lallemand Nottingham

24L Batch

1

30L Batch

1

S40/G40 Max Batch

1 - 2

48L Batch

2

G70 Max Batch

3

Froth Buddy

24L Batch

1

30L Batch

1

S40/G40 Max Batch

1 - 2

48L Batch

2

G70 Max Batch

3

Lallemand BRY97

24L Batch

1

30L Batch

1

S40/G40 Max Batch

1 - 2

48L Batch

2

G70 Max Batch

3

SafAle US05

24L Batch

1

30L Batch

1

S40/G40 Max Batch

1 - 2

48L Batch

2

G70 Max Batch

3

Mangrove Jack’s West Coast

24L Batch

1

30L Batch

1

S40/G40 Max Batch

1 - 2

48L Batch

2

G70 Max Batch

3

Unless specified in the description, this all-grain kit includes the following:

a detailed recipe and instructions
the complete grain bill (milled or unmilled)
all hop additions
brewing salts are included when a water source is selected or a water analysis is provided
kettle finings and yeast nutrient.

Any additional ingredients required are stated in the description

If using Froth yeast please read the Froth FAQ.

ATF All Grain Kits are made to order. Please allow some extra time for orders to be dispatched.

See more Brewing

Free shipping on orders over $150 within the Wellington region through to Palmerston North & South Wairarapa. Some exclusions apply

Pay with

Your transaction is protected with advanced security measures to keep your information confidential

ATF All Grain Brewery Kits

These recipes have been designed to be brewed on any brewing setup using a water to grist ratio of 3L per kilogram. Each kit contains a detailed recipe and instructions.

The pre-boil kettle volumes are based on a boil off rate of:

3.5L per hour for 24L batches.
4L per hour for 48L batches.

To ensure the target water profile and mash pH is achieved, brewing salts are included in each kit. During the purchase process, you can select your water source from a dropdown menu of known water sources. If your specific water source is not listed, you can provide a water analysis report, or simply select "Not Listed/Not Required."

If you are able to supply a water analysis report showing the amount of Calcium, Magnesium, Sodium, Chloride, and Sulphate in your brewing water, as well as the alkalinity (as CaCO3) or bicarbonate level, and pH, we will adjust the recipe and provide the required brewing salts specifically for you. Just select "I will supply a water analysis info" in the dropdown box.

If any of the minerals in your brewing water is above 50ppm, or if the Sodium level is over 25ppm, please contact us so we can assess whether your brewing water can be adjusted to the target profile of the beer you plan to brew.

The target water profile is provided for brewers using another source water so that the correct mineral/acid additions can be calculated to achieve the target water profile and mash pH. Click here to purchase brewing salts and/or lactic acid. If using chlorinated water we recommend using an activated carbon filter such as our Beer & Water Filtering System with our 0.5 Micron Carbon Water Filter or campden tablets to remove chlorine and/or chloramine from your brewing water.

Please do not hesitate to contact us if you have any questions regarding the addition of brewing salts or acid.

You may also want to join the All Things Fermented Brewers Group where lots of great information is shared. Members of the group are also eligible for special discounts. Check out the Member Benefits page for all the details.

All ATF kits are only put together when ordered to ensure all ingredients are as fresh as possible. Hops are kept vacuum sealed and refrigerated. Yeast is also kept refrigerated.

All grain is packaged in heavy duty (125 micron) plastic bags that are heat sealed to ensure your grain stays as fresh as possible.

ALL THINGS FERMENTED

Unit 4, 21 Ihakara Street
Paraparaumu
Wellington

Monday - Closed
Tues - Fri - 9:30am - 5:00pm
Saturday - 9:30am - 4:00pm

Ph: 022 5430659

Get direction