Search results

D-Type Keg Coupler - Full Stainless - with Duotight 5/8" to 8mm push fit fittings.

Includes:
1 x - D-Type Coupler with 5/8" Male Beer and Gas threads
2 x - duotight 5/8" duotight to 8mm push in
1 x - Non-Return Ball or Torpedo check piece (Non-Return Liquid)
1 x - Gas Duck Bill valve (Non-Return Gas)

How to install Gas Duck Bill Valve
Remove black EPDM washer inside 1 of the duotight push in fittings that you will use for gas. The duck bill valve is a washer as well as a non-return check piece. It is optional, you do not have to use the non-return check pieces for gas or liquid.

From: Kegland

Micromatic is a world leader in high quality, European keg couplers, and these D Type (US Sankey) Keg Couplers are no exception.

From: Micromatic Thread: 5/8" BSP

A replacement seal for Kegland D-Type keg spears. 

From: Kegland

A new 19 litre keg with ball-lock gas in and beer out posts, and lid with pull-ring pressure relief valve.

These new kegs are made with a high-barrier elastomer O-Rings to keep your beverage fresher for longer.

Unlike Silicone O-Rings, LOW2 O-Rings are made from synthetic M-Class Cross-Linked elastomer for superior oxygen barrier properties to prevent O2 ingress. This helps keep your beverage fresher for longer.

These premium brand new kegs are rated to 130PSI working pressure and are made using a robotic orbital welding machine. They have smooth welds making them sanitary and easier to clean. The black rubber on these kegs makes them a little nicer to use around your house as they are less likely to damage your tile floors or crack plastic lining inside your kegerator. 

They also have a lid with an internal tab/hook under the lid designed specifically for attaching a container for dry hopping.

Add a Carbonating Keg Lid to carbonate your beer quickly (overnight) at your standard serving pressure.

Dimensions: approx. 214mm Diameter x 629mm High

DO NOT USE BLEACH TO CLEAN. Bleach will break down stainless steel and causing pitting to occur.

Duotight push in fitting for 8mm line to 5/8inch thread - ideal for keg couplers and tap shanks.

Duotight fittings feature a double o-ring sealing design for a more secure seal. The seals are not only high quality EPDM o-rings but also it has two of them. The double o-ring means there is literally twice the sealing surface when compared with other push in fittings. This makes Duotight fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that you can bend the hose with a much tighter radius without leaking issues. 

We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used for up to 100 psi.

This easy to use and compact spunding valve is handy for keg transfers or pressurised fermentations when you want to limit oxygen exposure and use counter pressure in the keg you are filling into or in the fermenter you are using.

This new improved G2 model has several upgrades:

1. duotight fitting where the gauge attaches
- This allows for a multitude of different options such as digital gauge or larger gauge to be purchased separately and upgraded.

2. Manual ring pull pressure relief
- This allows for you to not only adjust the pressure with the black rotary knob but also use the ring pull to instantly release pressure if you want to release manually.

3. Option for Several Colour Coded PRVs to be used
Yellow - 1.2bar (17psi)
Red - 2.5bar (35psi)
Green - 4.5bar (65psi)
Grey - 7bar (100psi)

This is a low profile option only 4.5cm in height.  This spunding valve fits to standard gas posts on your fermenter or keg.

It works right out of the box but has several upgrade options as shown in the images.

From: Kegland

Duotight 8mm x Ball Lock Disconnect (Black + Yellow/Liquid).

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

This particular ball lock disconnect has been designed to suit 8mm outside diameter beer/gas line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

Some of the features include:

1. Duotight push in
   These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
   
   
2. Compact
   The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
   
   
3. Overmolded Poppet
   The overmolded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
   
   
4. Tool-less Disassembly
   Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
   
   
5. Extreme Chemical Resistance
   No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmolded poppet.  This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
   
   
6. Toughness
   This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
   
   
7. High Flow
   The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

From: Kegland

Duotight 8mm x Ball Lock Disconnect (Grey + Red/Gas)

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean.

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

This particular ball lock disconnect has been designed to suit 8mm outside diameter beer/gas line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

Some of the features include:

1. Duotight push in
   These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
   
   
2. Compact
   The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
   
   
3. Overmoulded Poppet
   The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
   
   
4. Tool-less Disassembly
   Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
   
   
5. Extreme Chemical Resistance
   No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet.  This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
   
   
6. Toughness
   This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
   
   
7. High Flow
   The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

From: Kegland

Duotight 8mm x Flow Control Ball Lock Disconnect (Black-Yellow/Liquid).

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact compared to the previous Stainless Steel Flow Control Ball Lock that has been discontinued due to the difficulty in repeated tooling and overall cost of raw materials.

The flow control ball lock disconnect is made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

Why not a flow control tap/devices?

Flow control devices are good but they inherently can create a small amount of turbulence and therefore can cause foaming.  In the past flow control taps have been the only common option.  Flow control taps are popular, however they have the issue that due to the fact they are placed right at the end of the beer line they have no head pressure.  As a result, any turbulence created can cause foaming and carbonation to come out of solution. 

Flow control ball lock disconnects like these on the other hand, have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution.  Even in the instance that high turbulence is created the beer will be far more resistant to foaming issues.  For this reason flow control ball lock disconnects like these have significantly better performance, allowing you the flexibility to adjust line resistance easily but without the introduction of turbulence that creates foaming. It cannot fix over-carbonated beer, but it can reduce the amount of beer line you would need to pour without excessive foaming.

Some of the features include:

1. New POK Injection-moulded Design - Like all new Duotight push in fittings that Kegland bring to market, all of them are manufactured with polyketone plastic (POK). This aids in chemical resistance, tensile strength, and toughness.

2. Duotight push in - These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!

3. Compact - The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.

4. Over moulded Poppet - The over moulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.

5. Tool-less Disassembly - Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.

6. Extreme Chemical Resistance - No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM over moulded poppet.  This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.

7. Toughness - This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough.

From: Kegland

The Gas Ball Lock Post for Keg Coupler is a liquid ball lock post with a female 5/8 inch connection. It allows you to connect ball lock disconnects to a keg coupler making it extremely easy to swap over from a corney keg to a commercial keg (you will need the correct coupler for the keg as well). 

The Duotight Inline Regulator - these compact inline regulators have been designed to suit 8mm (5/16") tubing.

Suits pressures 0-150psi however this unit is packed with the 0-60psi gauge as standard. Suitable for mains water pressure, also suitable for liquid or gas.

- Made from Acetal/POM, EPDM o-rings and stainless teeth
- Suits 8mm (5/16) OD tubing
- Includes integrated 0-60psi Pressure Gauge

For higher pressures such as mains water supply we recommend the 4mm ID Tubing, or 5mm ID if you do not need as high pressures and you would prefer higher flow rate.

This compact solution for adjusting water and gas pressure can be useful in many different applications. It can be used for compressed air, CO2, nitrogen, mains water supply and many other things.

The design utilises the reliability of the Kegland patented Duotight o-ring system to make sure you can fit hoses to this unit quickly and with leak free connections.

These gauges are accurate to about 10% of the range of the pressure gauge. So if you use the lowest range possible it will ensure the best possible accuracy.

IMPORTANT WARNING: Do not exceed gauge pressure. If you set a gauge pressure higher than the graduations on the gauge you can damage the gauge. (ie if you are using the 0-60psi gauge. Do not set pressure above 60psi or damage to the gauge may occur.)

Made From: food grade engineering plastic, stainless steel and quality made EPDM seals
From: Kegland

Beer (black) connector with barb for ball lock corny kegs.

This is a premium plastic ball lock connector designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the disconnect.

A new 9.5 litre keg with ball-lock gas in and beer out posts, and lid with pull-ring pressure relief valve.

These premium brand new kegs with Rubber Handle are rated to 130psi working pressure and are made using a robotic orbital welding machine. They have super smooth welds, making them sanitary and easier to clean. The black rubber on these kegs also make them a little nicer to use as they are less likely to damage your floors or crack plastic lining inside your kegerator.

They also have a lid with an internal tab/hook under the lid designed specifically for attaching a hop ball for dry hopping.

Add a Carbonating Keg Lid to enable you to carbonate your beer quickly (overnight) at your standard serving pressure.

Note: Hop Ball not included.

From: Kegland
Dimensions: approx. 214mm diameter x 370mm high
Rated to: 130PSI

This handy PCO38 Tapping Head assembly is a great way to get into kegging. Using standard home brew ball lock disconnects this is convenient, light weight, robust and useful for wine, cocktails, beer, and other beverages.

This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks.

The PCO38 keg system is a inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

This particular tapping head kit comes included with 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube.

The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (over 100C).

NOTE: The keg shown in the photos is not included.

From: Kegland

This is the Dual Pressure MK4 CO2 Regulator - you'll find the single pressure regulator here.

Need to set two different CO2 pressures for different beers on tap? Then you'll need two regulators to do it properly. With this MK4 Dual Pressure Regulator you'll be able to screw it into your CO2 bottle and fire away with two different pressures. No need to removing the High Pressure gauge off one regulator, buying an attachment and joining the two together.

This new MK4 Model regulator has several advantages including:

1. Safer design with colour coded pressure release valves
2. Easy mounting option
3. Optional extras such as gauge guard
4. Better body design and more reliable

Now comes with Duotight 8mm push-fit fittings rather than barbs. We recommend using thread tape to ensure a good leak free seal between the Duotight MFL fitting and the regulator.

From: Kegland

Note: CO2 bottle not included.

Duotight 6.35mm (1/4") x Ball Lock Keg Connector (Grey-Red/Gas).

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

This particular ball lock disconnect has been designed to suit:
6.35mm duotight compatible barbs. Like the Duotight Picnic Tap or Carbonation Caps (Yellow, Red, Stainless).

Some of the features include:

1. Duotight push in
These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!

2. Compact
The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.

3. Overmoulded Poppet
The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.

4. Tool-Less Disassembly
Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.

5. Extreme Chemical Resistance
No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.

6. Toughness
This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!

7. High Flow
The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

From: Kegland

The MK4 regulator provides reliable gas control. It has a large body for high flow rates and comes with a precision diaphragm for accurate adjustment, and also has a large adjustment knob for easy adjustment.

The regulator has also been designed so that the whole seat and seat cap assembly are manufactured as a fully encapsulated part. This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent. This further improves reliability.

New and improved features in the MK4 version:

• Stronger Steel Gauges made from thicker steel
• Triple scale gauges in kPa, Bar and PSI
• New Colour Coded PRV valves allowing different levels of pressure safety. Also being colour coded it's easy to identify which PRV is fitted.
• New M6 Mounting Holes for easy Mounting
• 0-50 PSI recommended working pressure (higher pressure gauges and PRV can be fitted to make this model go up to 100 PSI)
• Comes with Duotight 8mm - MFL Connector (we recommend using thread tape to ensure a complete seal)

NOTE: This regulator is sold with the Green (65psi) pressure relief valve. Lower (35psi) and higher (100psi ) pressure relief valves are available (sold separately).

Apart from CO2, it is also suitable for Oxygen, Argon, Helium, and Nitrogen by changing the cylinder connection.

Output Pressure Gauge: 0-100 PSI
Tank Pressure Gauge: 0-3000 PSI
Outlet: MFL with Barbed Swivel Nut
Effective Working Pressure: 0-50 PSI
From: Kegland

KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible

The All-New Mini 360 Core Actuator Regulator is the most versatile mini regulator on the market. It is an extremely versatile mini regulator that can be used with either a Sodastream Canister, or the smaller disposable CO2 16g bulbs.

Unlike other regulator designs this new design requires no sodastream adaptor and you do not have the issues of trying to screw the bulb or sodastream cylinder into the regulator while gas leaks everywhere. This robust, convenient and superior design is just what you need for any portable keg system.

Please note this is not compatible with the 2kg, 3.5kg or 5.0kg CO2 Cylinders.

Features:

• Core Puncturing / Actuator - Zero gas lost to screwing in bulbs or Sodastream style cylinders.
• Interchangeable ball lock disconnect orientations (e.g. 45° Premium Ball lock to 90° Stainless Disconnects)
• 6.5mm duotight compatible hose barb (6.5mm x 8mm duotight) can also suit hose and stepless clamps (e.g. 4mm ID, 5mm ID or 6mm ID hose)
• Heavily Protected Mini Guage Dial. (Also interchangeable to different ranges)
• Common Pressure relief valve compatible. (65psi Green PRV as standard, compatible with 35psi Red and 100psi Grey)

Includes:
1 x Mini 360 Core Actuator Regulator
1 x 360° 6.5mm duotight compatible hose barb
1 x 360° FFL Fitting for MFL Disconnects
1 x Port end cap
1 x 65psi Green PRV
1 x Sodastream to 16g thread bushing

Upgrade to digital:
Upgrade to a more accurate digital gauge with this gauge.  This mini gauge is easier to read and has a backlight so you can also read the pressure easily in the dark.

WARNING:
Do not over tighten onto your cylinder. It is recommended that you use a spanner to hold the neck of your Sodastream cylinder while attaching and detaching the Mini 360 Core Actuator Regulator.

From: Kegland