Sort by:
A solid silicon bung with a diameter of 32mm across the top, tapering to a diameter of 28mm at the bottom.
Fits the 5L Glass Jar Demijohn with Mecanicco Swing Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.
Does not fit the 5L Glass Jar Demijohn with Screw Cap/Lid.
A carbonation or aeration diffusion stone, either 0.5 or 2.0 micron. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer. The barb fits 1/4" (6.35mm) ID tubing.
If you're looking for diffusion stones with MFL thread, you'll find them here.
From: Kegland
A carbonation or aeration diffusion stone, 2.0 micron, with MFL thread. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer.
If you're looking for barbed diffusion stones, you'll find them here.
From: Kegland
The Easy-Siphon makes syphoning your beer or wine simple and is designed to start the flow in one stroke. The Easy-Siphon is made out of acrylic and includes a 60cm racking tube bent to perfection. It also includes an Anti-Sediment Tip.
The Tubing - 9.5mm ID fits snugly over the racking tube.
Compatible with the 5L Glass Jar Demijohn and 5L Glass Jar Demijohn with Screw Cap/Lid.
A smaller (shorter) 350ml syphon. Perfect to use with smaller fermenters.
The Tubing - 9.5mm ID fits snugly over the racking tube.
Compatible with the 5L Glass Jar Demijohn and 5L Glass Jar Demijohn with Screw Cap/Lid.
Features:
- 0.5 micron nominal filtration
- Cyst reduction (Giardia, Cryptosporidium)
- Turbidity reduction
- Chlorine taste and odor reduction
This fits our 10 inch beer filtering system.
Note: brand may vary.
This fits our 10 inch beer filtering system.
Note: product may vary from photo shown.
A 10 inch filter housing for filtering your beer prior to bottling or kegging, or to filter water.
For beer this filter works best when used when transferring cold uncarbonated beer. All you will need to do is purchase some hosing, clamps, ball locks (if transferring to or between kegs) and a 1 Micron Filter to use this system.
- Clear high pressure housing
- Purge valve to expel air pockets
- ½” BSP inlet and outlet
- Includes Duotight 9.5mm (3/8"") fittings
- Brass threaded ports for durability
- Compatible with other 10” filter systems
Note: you will need tubing to match the fittings (not included).
You will need a filter insert to use this system, like our 1 Micron Washable Filter (for filtering beer) or a 0.5 Micron Carbon Water Filter, (for water filtering).
Not suitable for hot liquids.
Large stainless steel funnel with a handle for bottling spirits. Also ideal for use with paper coffee filters if transferring oak aged spirits or spirit that has been polished on carbon.
Specifications
- 14cm diameter, not including handle
- 12.5cm height
- Stainless Steel
- Dishwasher Safe
Gas Free Ball Lock Line Cleaning Kit
Are you ever in a situation where you don't want to unhook your gas line from your kegs, or have ball lock disconnects that you need to clean over at the sink but don't want to take your gas line all the way over there? Well, Kegland thought of a better way. Why not fill a PET Bottle with your cleaner / sanitiser and pump it without gas!
This little device can also be used as a mini party keg without a gas source (should be consumed well within 24 hours of pumping). BYO Liquid disconnect, hose and picnic tap.
Contains:
1 x KegLand Yellow Carbonation Cap
1 x KegLand PCO Tee Piece (Female x Male x Male)
1 x Mini Yellow Hand Pump
1 x 30cm Piece of EVABarrier Line 5mm ID x 8mm OD (can be stretched for larger PET bottles)
From: Kegland
A bored silicone bung for the Grainfather GF30 and SF70.
Measures approximately 41mm across the top, tapering to approximately 35mm across the bottom.
A 1 gallon (3.8 litres) wide-mouth glass jar with a plastic screw top lid. Ideal for steeping, macerating, or ageing spirit.
Could also be used as a small fermenter by making a small hole in the lid and adding a top hat grommet and airlock.
Dimensions
- Diameter: 155mm approx.
- Height: 260mm approx.
- Mouth Diameter: 100mm approx.
These 304 Stainless 2200w weldless elements are designed to fit a 32mm hole inside the wall of your brewing vessel or boiler. It comes bundled with the power cord.
We do recommend using a RAPT Temperature Controller to run this element with the appropriate thermowell or temperature probe attachment.
These electric brewing elements are highly recommended for your HLT, or even for a HERMS or RIMS setup. Multiple elements may be required for larger volumes and depending on what temperature you are trying to achieve. If you are going to be using these elements directly in your mash tun, and will try to maintain temperature using the element, we would recommend getting a power control chip 3600w to modify the power output to the element. Too higher power directly in contact with your malted grain can cause scorching/off flavours as the temperature may not be evenly distributed and isolated purely around the element itself.
Element Length: approx. 300mm
Diameter: approx. 25mm
Thread: approx. 32mm
From: Kegland
3600 Watt Stainless Steel Heating Element with 2 inch tri-clamp (220-240v)
It can be fitted to a 2" tri-clamp ferrule. It does have a water-resistant screw element guard. This was produced to be used with the 118L Kegmenter that has 2" ferrules.
It is highly regarded as a popular and reliable element for distillers and homebrewers.
This element is to be installed by a professional electrician with a 15amp Cord.
From: Kegland
Heavy Duty Vulcanized Latex Brewing Gloves - 55cm Long.
These heavy duty brewing gloves are made from vulcanized latex, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermzillas and those brew pots.
Tough chemical resistant material provides good protection to your hands during clean-up and sanitary handling of equipment. They are 55cm long so will also protect the forearm when reaching into harsh cleaning chemicals.
Weight: approx. 300gm
From: Kegland
The Heat Resistant Gloves / HIZO Oven Mitts are as impressive as they are functional with the ability to handle contact with temperatures of up to 500° Celsius (932°F). This means that it is perfect for use with oven baking, hot pots, grilling, barbecuing, and woodstoves.
Fashioned with high-quality aramid fibers which work to insulate and protect hands from burning temperatures, these gloves have a comfortable cotton and polyester lining which allows for breathability to resist sweating and a gauntlet-length style of design to protect wrists and forearm from scorching heat as well. These gloves are thick to provide excellent thermal protection and durability, but they are lightweight for extended use without fatigue.
Sizing: Medium only
With heat resistance up to 500°C, these gloves are perfect for:
- Perfect for oven baking, hot pots, grilling, barbecuing, and woodstoves
- Adjusting logs in the fireplace
- Touching scorching hot utensils or food while boiling or frying
- Changing light bulbs
Features:
- High-quality aramid fibers for insulation and cotton and polyester lining
- Designed for mobility and flexibility in mind
- Food-grade silicone layer
- Machine-washable, and can be easily hung on the line to dry
From: Kegland
30mm Hoffman Clamp - Stainless Steel.
Hoffman Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow.
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing.
This can be particularly useful when using a liquid management still.
Size: 30mm
From: Kegland
This polyester bag is perfect for small grain additions or for hopping beer. It is a tube of fabric that is approximately 15cm wide and 75cm long. Both ends are open for easy cleaning and can simply be tied closed while being used. Perfect for grain or hops (suitable for use up to 110 degrees C).
Low Volume CIP Spinning Spray Rotor (stainless swivel nut and barb).
Introducing the new Low Volume CIP Spray motor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day.
- Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units)
What can it do?
Clean In Place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to.
Specifications
1 x Custom molded rotating spray head with 1/2" BSP thread
1 x 300mm length silicon tubing suitable for your BrewZilla recirculation arm
1 x Stainless nut and barb
Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down.
From: Kegland
A mix-stir agitator rod makes aerating in a carboy a breeze. Simply attach the agitator rod to your drill and you are ready to go. The blades fold up for easy insertion into any sized carboy (except 5L or under).
De-gas your wine in a few minutes, or aerate your wort for a healthy fermentation.
The mix-stir is very effective at de-gassing your wine although it should not be used for more than a few 10-15 second bursts. If you over-use the mix-stir you risk adding oxygen to your wine.
A stainless steel pump for the MKII 25watt High Temperature Magnetic Drive Pump from Kegland.
This pump is constructed of food-grade materials and handles boiling wort. The impeller housing is made from polysulfone as it is a tough, food-grade plastic rated up to 120C. The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it’s not self priming, you must put the pump under the level of the liquid source.
This is an extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.
The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.
An optional stainless steel pump head is also available.
Voltage: 240V-AC
Power: 25 watts
Max Head: 3.4m
Max Capacity: 19L/min
Fittings: 1/2" BSP
A 23 litre plastic carboy (bottle) suitable for fermenting beer, cider, wine, or spirits.
The Rubber Stopper #10 fits this carboy.
This 5L Plastic Carboy is made from alcohol-safe plastic and includes a lid. These are great for fermenting meads, cider, wine and spirit wash or as storage containers for spirits.
A rubber stopper (bung) with a diameter of approximately 50mm across the top, tapering to a diameter of approximately 41mm at the bottom. Fits the 23 Litre Plastic Carboy and 11.5 Litre Plastic Carboy.
A gas shut off valve (ball valve) with built in return check valve and MFL nipple.
Material: Chrome Plated Brass Thread: 1/4" x 1/4" MPT
From: Krome Dispense
A two piece sight glass set that can be easily dismantled and cleaned. The sight glass itself is not made from glass, it is made from robust polycarbonate.
The two piece set includes:
- Stainless ½ inch BSP threaded post with o-rings
- 60cm long polycarbonate tube (13mm ID x 15mm OD) that you can cut down to size to suit the vessel that you are using.
For a leak free seal we recommend you secure the sight glass to the post with a 17mm step-less clamp.
From: Kegland
The Smell Eliminator Kit completely eliminates ALL smells from the fermentation process for both beer and spirits.
Includes everything you need to attach to a standard fermenter with airlock (airlock not included).
Now you can ferment wherever is best to maintain your desired fermentation temperature without worrying about the smell.
The carbon cartridge for the Smell Eliminator Kit is made from a specially designed dense carbon block, which will last for approximately 5 brews or washes. Will not filter liquids.
Made from 304 stainless for hygiene and will last a lifetime.
Instructions: The Smell Eliminator Kit
A replacement carbon cartridge for the Smell Eliminator Kit. Made from a specially designed dense carbon block, it will last for 5 brews or washes. Will not filter liquids.