Sort by:
A hole plug fitting for plugging 17mm holes.
- 304 Stainless Steel
- Includes o-ring for leak-proof seal
- Includes spare o-ring
Ideal for plugging holes from these fittings:
- Brew Bucket ball valve
- Bucket / Chronical thermowell
- Brewmaster Edition Chronical FTSs chiller coil holes
- FTSs lid holes
From: Ss Brewtech
Silicone Stopper / Bung for Ss Brew Buckets made from food grade silicone.
The Brew Bucket was the first product from Ss Brewtech, and for many brewers the Brew Bucket was their first chance to ferment in stainless steel. Nearly a decade later, they challenged their engineering team to pair some of the newest technologies with the original design.
The star of the Brew Bucket 2.0 is the new Brew Bucket Pure Flow Valve. This valve uses the Pure Flow technology, originally developed for the line of professional brewhouses. The removable silicone membrane of the valve provides a sanitary environment where beer makes contact with nothing except silicone. Additionally, there is a moulded the racking arm geometry into the valve’s silicone diaphragm to provide a seamless flow path for beer when transferring from the Brew Bucket 2.0.
Sanitary Connection
The valve attaches to the Brew Bucket using a welded external garden hose thread fitting that allows for a compact, easy-to-use connection without the need to fumble with additional clamps and gaskets. The threads are located externally and sealed by the gaskets built into our Pure Flow silicone, keeping them clean and sanitary. With the new valve design, the brewer can fully rotate the racking arm 360 degrees for maximum control while racking a finished beer.
Conical Base
The Brew Bucket 2.0 continues what made the original a great solution for home brewers. The pro-inspired conical base helps minimize trub interaction with fermented beer, thus limiting any concerns of off flavours produced during maturation. Combined with the rotatable racking arm, brewers can effortlessly rack off clean beer like the pros do in craft breweries.
Full Width Lid
The Brew Bucket 2.0 features the same full-width removable lid as the original, with a wide access opening that makes cleaning and sanitizing a breeze. Finally, the included thermowell has been repositioned to the lid, and the increased length allows for accurate readings, even when brewing partial batches.
Summary of features:
- Pro-Inspired Conical base
- Blow off port in lid for airlocks or blow off tubing
- Rotatable Silicone Racking Arm
- Pure Flow Valve for transfers and gravity samples
- 304 Stainless Steel
- 26L (7 gallon) capacity
- 300m Thermowell
- Thermometer | LCD Temp Display Module Dual Temp
- Wide lid with secure spring clamps
- Etched volume markings gals/litres
- Welded carry handles
- Surface safe Silicone Feet
Note: a silicon bung is included but no airlock.
Dimensions: approx. 61cm H x 33cm W x 33cm D
For use on Brew Bucket 3/8" Ball Valve. Includes:
- 4 pcs 8.5 mm x 1 mm Buna N 70 O-rings
- 2 pcs 16mm x 1.8 mm Buna N 90 O-rings
- 6 pcs total in this set (enough to replace all o-rings on one Brew Bucket valve)
A Sparge Arm for use with the Ss InfuSsion Mash Tun.
- 304 Stainless Steel construction
- Designed for gravity feed from HLT, or combine your own pump / flow control valve
- 3/8” diameter stainless tubing
- Custom silicone handle mount for Ss Mash Tun
- Easily adjust height of sparge head up / down
- Uniform liquid dispersion from sparge head
4 pieces - 11mm x 1.5mm
From: Ss Brewing Technologies, USA
Replacement Lid Seal for SS Brewtech Brew Buckets and Chronicals; made from brewer's grade silicone.
These also fit the FTSs lids at the matching size.
From: Ss Brewing Technologies
The Ss Tri-Clamp Brew Kettle is constructed from 304 stainless steel and features an aluminium core tri-clad bottom to foster even heating and minimise the risk of scorching and allow for the use of induction heating.
Tri-Clamp ports have long been the standard in professional brewing, and for a good reason, they're quick, sturdy, and sanitary. The Ss Tri-Clamp Brew Kettle now brings this pro-level feature to the home brewer in an affordable package.
The sturdy riveted silicone-coated handles are now located on the front and back for easy moving and dumping of the kettle while also allowing for tighter brew stand setup. Just like the original Ss Brew Kettle, the tri-clamp version features an integrated trub dam into the dip tube to minimise the pickup of trub and hop material during knockout. The result is much clearer wort making its way into the fermenter.
Features:
- Tri-Clad bottom
- Sanitary tri-clamp ports
- Sturdy riveted silicone coated handles
- 3 piece tri-clamp ball valve with trub dam pick-up tube
- Lid designed to hang on side of handles
- Etched volume markings gals/litres
- Induction burner compatible
Available in these sizes:
- 38 Litre (10 Gal)
- 57 Litre (15 Gal)
Ss Brewtech recommends using Trisodium Phosphate (TSP) (sold separately) for initial cleaning to remove oils, grease and any manufacturing residue.
- Brewer's Grade 304 Ss
- Installs into 17mm punched / drilled hole
- 6.5 mm inner diameter of tube opening
Usually available in these sizes:
- 100mm
- 200mm
- 300mm
Includes one o-ring.
From: Ss Brewing Technologies, USA
