For use with the G70 and G40 to allow quick drainage from the bottom of the unit. Made with high temperature resistant 304 grade stainless steel, the faucet’s operating temperature ranges from -10°C to 150°C.

Alternatively you could use the Ball Valve Assembly 316 Stainless Steel - 1/2 Inch.

Transform the G40 or G70 Brewing System into a home distillery with the G40 & G70 Distilling Lid. This lid features an industry standard 4” tri-clamp opening to allow for the connection of the Still Spirits T500 Reflux and Alembic Condensers, as well as third-party distilling equipment. Note: We will be launching Accessory Attachment Kits for the T500 Reflux and Alembic Condensers in the first quarter of 2023.

Features:

• 304 Grade Stainless Steel Construction

• Standard 4” tri-clamp opening (industry standard)

• Pressure relief valve

• Barrel clamp locking mechanism

The ultimate bundle to pair with the T500 Alembic Condenser allowing you to turn your G40 or G70 Brewing System into an all-in-one automated Brewing System that can also be used for pot distillation. Bundle includes the G40 & G70 Distilling Lid plus the T500 Alembic Condenser Attachment Kit so you can brew quality beer and distill whiskey, bourbon, rum, and more.

FEATURES

Lid & Attachment Kit:

• 304 Grade Stainless Steel Constructions

Attachment Kit:

• Copper Helmet to Aid in Reduction of Sulphur Compounds and Retention and Development of Flavour
• Lid:
• Standard 4" tr-clamp opening (industry standard)
• Pressure relief valve
• Barrel clamp locking mechanism

Note: Still Spirits T500 Alembic Condenser sold separately 

WHATS INCLUDED

G40 & G70 Distilling Lid

T500 Alembic Condenser Attachments Kit includes:

4” Tri-Clamp
4” Tri-Clamp Seal
4” to 2” Copper Alembic Helmet
2” Tri-Clamp
2” Tri-Clamp Seal
2” to ½” (48mm) DN40 Thread Adapter
Condenser Silicone O-Ring

SPECIFICATIONS

Lid & Attachment Kit:

304 Grade Stainless Steel Construction

Lid:

Standard 4” tri-clamp opening (industry standard)
Pressure relief valve
Barrel clamp locking mechanism

Attachment Kit:

Copper Helmet to Aid in Reduction of Sulphur Compounds and Retention and Development of Flavour

The G40 & G70 Distilling Lid plus the complete set of fittings to connect the T500 Reflux Condenser (stainless steel or copper) to either the G40 or the G70 for reflux distilling.

The ultimate bundle to pair with the T500 Reflux Condenser stainless steel or copper), allowing you to turn your G40 or G70 Brewing System into an all-in-one automated brewing system that can also be used for reflux distillation. Bundle includes the G40 & G70 Distilling Lid plus the T500 Reflux Condenser Attachment Kit so you can brew high quality beer and distill neutral spirits.

INCLUDES

• G40 & G70 Distilling Lid
• Standard 4" tri-clamp opening (industry standard)
• Pressure relief valve
• Barrel clamp locking mechanism
• 2” to ½” (48mm) DN40 Thread Adapter
• 2” Tri-Clamp Seal with Mesh
• 2” Tri-Clamp
• 4” to 2” Tri-Clamp reducer
• 4” Tri-Clamp Seal
• 4” Tri-Clamp
• 304 Grade Stainless Steel Construction 

Note: T500 Reflux Condenser sold separately 

A complete set of fittings to connect the G40 & G70 Distilling Lid to the Still Spirits T500 Alembic Condenser for pot distilling.

The G40 or the G70 paired with the Distilling Lid and T500 Alembic Condenser Attachment Kit offers an all-in-one automated brewing system that can also be used to for pot distillation, making it the ultimate combo to brew high quality beer and distill whiskey, bourbon, rum, and more.

INCLUDES

• 4” Tri-Clamp
• 4” Tri-Clamp Seal
• 4” to 2” Copper Alembic Helmet
• 2” Tri-Clamp
• 2” Tri-Clamp Seal
• 2” to ½”(48mm) DN40 Thread Adapter
• Condenser Silicone O-Ring

FEATURES

• 304 Grade Stainless Steel Construction
• Copper Helmet to Aid in Reduction of Sulphur Compounds and Retention and Development of Flavour

Note: Distilling Lid & Still Spirits Pot Still Alembic Copper Condenser sold separately.

A complete set of fittings to connect the G40 & G70 Distilling Lid to the Still Spirits T500 Reflux Condenser (stainless steel or copper) for reflux distilling.

The G40 or the G70 paired with the Distilling Lid and T500 Reflux Condenser Attachment Kit offers an all-in-one automated brewing system that can also be used for reflux distillation, making it the ultimate combo to brew high-quality beer and distill neutral spirits.

INCLUDES

• 2” to ½” (48mm) DN40 Thread Adapter

• 2” Tri-Clamp Seal with Mesh

• 2” Tri-Clamp

• 4” to 2” Tri-Clamp reducer

• 4” Tri-Clamp Seal

• 4” Tri-Clamp

• 304 Grade Stainless Steel Construction 

Note: Distilling Lid and T500 Reflux Condenser sold separately 

Simply plug the Whirlpool Arm into the G40 or the G70 recirculation pipework to easily create a whirlpool with no manual stirring necessary.

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost.

Requires 15amp power supply.

The Grainfather G70v2 is the ultimate 70L brewing system, allowing you to create enough high-quality beer to fill 122 pints in one brew. It’s the perfect match for experienced brewers, with built-in wireless connectivity so that you can connect to the Grainfather App for guided brewing and access to brewing tools, recipes and calculators. Now with a perforated grain basket, the G70v2 makes mashing even more efficient.

FEATURES

• NEW perforated grain basket for an improved brewing experience with no top plate or additional pipework required
• Integrated sight glass now a part of the recirculation pipework for easy volume reading
• Sleek 304 grade stainless steel body
• Connect your mobile device to the smart wireless controller via the Grainfather App and manage your brew remotely
• Conical base for maximum wort transfer
• Efficient and sanitary brew transfer with the Counterflow Chiller
• Quick and easy cleaning with CIP (clean in place) capability
• PID (proportional integral derivative) heating control for accurate temperature management during mashing
• Rolled edge grain plate and large bottom-mounted dual-stage hop filter
• Backed by a 3-year warranty

WHATS INCLUDED

• Grainfather G70v2
• Wi-Fi controller
• Counterflow Chiller
• Hop filter
• Perforated grain basket
• Grain plate
• Glass lid
• Lifting bar
• Recirculation hose
• Built-in pump

SPECIFICATIONS

SIZE:

• 900 x 555mm

WEIGHT:

• 32.5kg

MAX PRE-BOIL VOLUME:

• 70L

BATCH VOLUME:

• Max: 60L
• Min: 30L*

GRAIN BILL:

• Max: 16kg*

*17kg (with use of a top plate – sold separately)

• Min: 8kg

POWER:

• NZ, AU, EU, US: 3300W, 230V
• UK: 2900W, 230V

CONNECTIVITY:

• WiFi Control

Click here for spec sheet.

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost. 

Don’t leave your fermentation to chance, leave it to the GC2. Produce consistent beers every time with accurate temperature control of up to two fermenters.

Control and power up to two fermenters at different temperatures and fermentation schedules. Compatible with the Grainfather App when connected to Grainfather G SERIES fermenters or the GCA Glycol Chiller Adapter for most other fermenters to manage your fermentation from anywhere via Wi-Fi.

By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time.

FEATURES:

• Control and power up to two fermenters at different temperatures and fermenting schedules.
• Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters.
• Sleek and compact design with LED control display
• Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi
• Backed by a 3-year warranty

WHATS INCLUDED

• GC2 Glycol Chiller
• Propylene glycol*
• 2 x cooling connection couplers*
• 2 x 2m insulated hoses*
• Glycol funnel
• Silicone tubing for priming pump

*Packed separately

SPECIFICATION

SIZE:

• 583 x 320 x 363mm (23 x 12.6 x 14.6”)

 WEIGHT:

• 19.5kg (71.5lb)

 CAPACITY:

• 3L (0.8 US Gal) glycol tank

 POWER

• NZ/AU/EU/UK: 180W, 220V
• US: 160W, 110V

 CONNECTIVITY

• None*

 *Wi-Fi control available when used with G SERIES fermenters or the GCA.

Note: The instructions for the Glycol Chiller will be attached to the outside of the shipping box. It is important that you retain these, do not throw them away and read them carefully before use to ensure no damage occurs to the unit. If these for any reason are not included with your purchase, we highly recommend you download a new copy via the instructions tab on this page and read them carefully.

Warranty:

There is 36 month warranty for Glycol Chillers. 

IMPORTANT PLEASE READ: Make sure the chiller has been standing upright for at least 24 hours before turning it ON. Before using the Glycol Chiller, you must prime the pump by carefully following the instructions

This item is not eligible for free shipping.

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost. 

Control your fermentation temperature accurately, every time!

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. 
With the ability to individually power and control the temperature of up to four Grainfather Conical Fermenters, each with their own fermenting schedules, the Grainfather Glycol Chiller is the perfect addition to ensure superior fermenting results.

Design:
With a sleek and compact design, that still accommodates our full array of features, the Glycol Chiller maintains the Grainfather’s principle of providing quality home brewing equipment, that deliver’s craft brewery like results, with a small footprint. 
With the addition of the Glycol Chiller, your system is operating at the ultimate level and you are even able to cold crash and lager down to 4-6ºC (39-43°F). The Glycol Chiller connects to a hidden cooling sleeve, located in between the two stainless steel walls of the Conical Fermenter. Your desired temperature is dialed into the digital temperature controller on the Conical Fermenter, the liquid then travels through this sleeve, cooling the stainless steel which in turn cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, is completely concealed and does not need cleaning or sanitising - a true innovation for a fermenter on this scale.

Features:

• Allows you to cold crash 23 L (6 US Gal) of wort to as low as 4-6ºC (39-43°F). Minimum temperature will vary based on external factors such as ambient room temperature, the number of fermenters connected and other environmental conditions.
• Cools and powers up to 4 Conical Fermenters at different temperatures and fermenting schedules.
• Includes propylene glycol to get you efficient cooling for your fermenter right away.

Note: The instructions for the Glycol Chiller will be attached to the outside of the shipping box. It is important that you retain these, do not throw them away and read them carefully before use to ensure no damage occurs to the unit. If these for any reason are not included with your purchase, we highly recommend you download a new copy via the instructions tab on this page and read them carefully.

Warranty:

There is 36 month warranty for Glycol Chillers. 

Includes:

• Glycol Chiller
• Wall outlet power cord with plug
• 2 x cooling connection couplers
• 2 x 2 m (6.5 ft) insulated hoses
• 1 x Glycol Funnel
• 1 x silicon tube for priming pump
• 1 x 3 L (3 US qt) propylene glycol

NOTE: When you receive your unit, you will need to fill it up with a propylene glycol mixture. Refer to the instructions provided with the Glycol Chiller for mixing, filling and pump priming information.

Specs:

• LED display
• 6 L (1.5 US Gal) glycol tank
• 300 W
• 220 – 240 V, 50Hz
• 390W x 450D x 656H (mm)
• Weight: 28.3 kg (62 lbs)

IMPORTANT PLEASE READ: Make sure the chiller has been standing upright for 24 hours before turning it ON. Before using the Glycol Chiller, you must prime the pump by carefully following the instructions

This item is not eligible for free shipping.

A bored silicone bung for the Grainfather GF30 and SF70.

Measures approximately 41mm across the top, tapering to approximately 35mm across the bottom.

Ferment like never before! The Grainfather GF30 gives the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised. The Grainfather Conical Fermenter provides you with a modular system for all of this and more!

FEATURES:

Basic Cooling Pump Kit

The Cooling Pump Kit allows users of the Grainfather Conical Fermenter to control the fermentation temperature with cold water by pumping it through the double walled insulated interior.

Wireless Connectivity

The Conical Fermenter Pro comes with a built-in controller with wireless connectivity and digital display. This means you can connect the controller to the internet and the Grainfather App and track fermentation with automatic alerts and notifications from wherever have an internet connection. 

Double Walled

A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve.

Integrated Gentle Heating

In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature controlled room. The fermenter acts as an artificial environment which can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast.

Integrated Cooling Sleeve

In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the additionally purchased Glycol Chiller. Temperature is dialed into the Temperature Controller and as the cooling liquid travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter and never needs cleaning or sanitising - a true innovation for a fermenter of this scale.

Easy Access to the Interior for Hassle Free Cleaning

The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimises the risk of infection.

Golden Angle Conical

The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur.

Dual Valve Tap

Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through an inlet above the sediment line, allowing for clear, sediment free beer. Easily collect your yeast from below the sediment line with the same unique valve for re-cultivating and pitching. The innovative design of the valve allows for this dual functionality and less cleaning for you.

Support

The Grainfather Conical Fermenter is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Conical Fermenter works, as well as general customer service enquiries.

 All Grainfather Conical Fermenters come with a 24 month warranty.

Whats Included

Conical Fermenter 
Fermenter Lid
Rubber Bung
Bubbler Airlock
Cone Plug
Cone Plug Seal
5 cm (2") Tri Clamp
Built in Wireless controller
Powder Adapter and Wall Plug
2 m (6.5 ft) M12 3-Pin Power Cord
Dual Valve Tap

Digital Temperature Controller

Specifications

304 Stainless Steel Body (polished inner and brushed outer)
30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)
30 W, 12 V heating power
Built in Wireless controller
3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)
5 cm (2") ferrule on bottom of cone
Dual Valve Tap with 110 mm (4.3”) inlet
Dimensions of Conical Fermenter: 
Diameter with handles: 360 mm
Height (without airlock): 910 mm
Height with bubbler airlock: 1090 mm 
Dimensions of Carton

Ferment like never before! The Grainfather Conical Fermenter give the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised. The Grainfather Conical Fermenter provides you with a modular system for all of this and more!

FEATURES:

Wireless Connectivity

The Conical Fermenter Pro comes with a built-in controller with wireless connectivity and digital display. This means you can connect the controller to the internet and the Grainfather App and track fermentation with automatic alerts and notifications from wherever have an internet connection. 

Double Walled

A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve.

Integrated Gentle Heating

In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature controlled room. The fermenter acts as an artificial environment which can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast.

Integrated Cooling Sleeve

In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the additionally purchased Glycol Chiller. Temperature is dialed into the Temperature Controller and as the cooling liquid travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter and never needs cleaning or sanitising - a true innovation for a fermenter of this scale.

Easy Access to the Interior for Hassle Free Cleaning

The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimises the risk of infection.

Golden Angle Conical

The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur.

Dual Valve Tap

Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through an inlet above the sediment line, allowing for clear, sediment free beer. Easily collect your yeast from below the sediment line with the same unique valve for re-cultivating and pitching. The innovative design of the valve allows for this dual functionality and less cleaning for you.

Support

The Grainfather Conical Fermenter is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Conical Fermenter works, as well as general customer service enquiries.

 All Grainfather Conical Fermenters come with a 36 month warranty.

Whats Included

Conical Fermenter
Fermenter Lid
Rubber Bung
Bubbler Airlock
Cone Plug
Cone Plug Seal
5 cm (2") Tri Clamp
Built in Wireless controller
Powder Adapter and Wall Plug
2 m (6.5 ft) M12 3-Pin Power Cord
Dual Valve Tap

Digital Temperature Controller

Specifications

304 Stainless Steel Body (polished inner and brushed outer)
30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal)
30 W, 12 V heating power
Built in Wireless controller
3.8 cm (1.5") ferrule on lid (for pressure transfer attachments)
5 cm (2") ferrule on bottom of cone
Dual Valve Tap with 110 mm (4.3”) inlet
Dimensions of Conical Fermenter:
Diameter with handles: 360 mm
Height (without airlock): 910 mm
Height with bubbler airlock: 1090 mm
Dimensions of Carton
368 mm W x 325 mm L x 905 mm H

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost. 

Get professional results at home with the ultimate fermentation package! The GF30 Advanced Cooling Setup includes the GF30 Conical Fermenter and the GC4 Glycol Chiller. This set up gives you a superior fermentation environment with optimum temperature control, allowing you to achieve expert brewing results with every beer and the flexibility to control/monitor fermentation from anywhere thanks to built-in wireless control. You’ll even be able to cold crash and lager down to 4-6°C (39-43°F).

This is a replacement seal (2 inch beaded tri clamp seal) for the Conical Fermenter cone plug.

The Grainfather GF30 Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates when using either using the Grainfather GC4/GC2 Glycol Chiller or Cooling Pump Kit to lower the fermenter’s temperature.

Features:

• Made from high quality 5mm thick SBR foam.
• Consists of two independent sections for both the main body and the fermenter cone for total coverage.

The new Grainfather Conical Fermenter Wireless Temperature Controller is wifi-enabled, and is designed for use with the Grainfather Conical Fermenter PRO. This all-new wireless controller is an upgrade from the original Conical Fermenter Temperature Controller, and can be easily installed on the Conical Fermenter using the directions provided. 

Control the heating and cooling (when used with The Grainfather Gylcol Chiller or Cooling Pump Kit) remotely with the Conical Fermenter Wireless Temperature Controller. Simply connect the controller to the Grainfather App and control and track the fermentation temperature when you're out and about.

This new wireless controller attaches directly to the fermenter, alleviating any concern of the controller falling off the mounting bracket. 

With a new and improved digital display and the flexibility the new controller offers, you are definitely going to want to upgrade.

Instructions

A replacement liquid inlet for the GF30 Dual Valve. 

Specifications

304 stainless steel
110 mm

Easily attach to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer. This also ensures less chance of oxygen entering the beer during transfer.

All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe.

NOTE: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed.

Specifications

High quality 304 stainless steel components
Accurate digital pressure gauge
Needle valve for precise control of pressure

Replacement high-temperature food-grade silicone hose for use with the Grainfather GF30 Conical Fermenter Pressure Transfer.

This tube can connect to the sample valve of the dual valve tap or the pressure transfer dip tube for transferring liquid out of the fermenter.

Length: 2m

The GCA Kit makes accurate temperature control more accessible for brewers. Whether you have a plastic or stainless steel fermenter, bucket or barrel, or even a conical, this kit has everything that you need to connect your fermenter to the Grainfather Glycol Chiller (sold separately).

It comes with a Glycol Chiller Adapter (GCA), heating pad, cooling coil, rubber bung, 4 x rubber bung stoppers, 2 x hose clamps and 2 x cooling connection hoses. The GCA also has wireless capabilities, making it compatible with the FREE Grainfather App, so you can control your fermentation temperature from anywhere.

Simply assemble the cooling coil and bung, and place this inside your fermenter. Attach the hoses to the cooling coil using the hose clamps and then also connect the other end of the hoses to the Glycol Chiller. Attach the heating pad and the temperature probe to the fermenter and then connect both cables to the GCA. Plug the power cord into the GCA, then connect the other end of the cord to the Glycol Chiller. Once set up and connected, the cooling coil and heating pad will regulate cooling and heating as required.

Now everyone can benefit from accurate temperature control and create even better beers!

View the Glycol Chiller Adapter Kit instructions online

The Grain Mill Bamboo Mounting Board works great with the Electric Grain Mill. Mount the mill onto the board and place it over a bucket to catch your freshly crushed grain.

This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew during cooler times of the year. 

• Material - SBR Foam (11mm thickness).
• Designed for the Grainfather for heat insulation, especially in colder temperature areas.
• Easy to wipe clean, polyurethane outer layer, and machine washable.

This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the counter flow wort chiller, pipes and pumps.

This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.

Instructions

• Add 2 Tbsp of cleaner to 15 L of water at 60°C to your Grainfather.
• Attach the counter flow wort chiller and recirculate the cleaner for 15 minutes.
• Remove the counter flow wort chiller and attach the recirculation pipe and recirculate for another 5 minutes.
• Rinse all surfaces that came in contact with the cleaner thoroughly with water.
• Gently scrub the inside of the boiler with a soft bristle brush to remove left over stains.
• Rinse and drain.

Perfect for small batch brewing, where you can test different beer styles or recipes and have more varieties of beer on the go. 

The Micro Pipework is perfect for brewing 10 L beers, or standard batches of a lower ABV beer with a small grain bill. Use this pipework when you are brewing with 2 kg - 4 kg of grain. 

The SF50 has a 50L capacity that is designed to hold batches of up to 45L. It can be adapted to suit your brewing space with an adjustable leg height and castor wheels for easy manoeuvrability. Its intuitive design, 304-grade stainless steel build, and 113° angle conical makes both fermentation and cleaning easy. A perfect brewing companion for smaller brewing systems like the S40, G30 or G40.

Product Features:

• Sleek high quality 304 grade stainless steel body
• 113° angle conical avoids yeast and sediment getting stuck to the sides of the cone.
• Adjustable leg height and castor wheels for easy manoeuvrability.
• Easily dump yeast with a separate valve.
• Insert temperature probes into the built-in thermowell for accurate temperature readings.
• Transfer and take samples above the yeast and trub line with an accessible valve on the side of the unit.
• Compatible with the GC4 for accurate temperature control.
• Comes with a 2-year warranty.

What's Included:

• Grainfather SF50 Conical Fermenter
• Stainless steel lid with 38mm tri-clamp fitting
• Rubber bung & airlock
• Thermowell (use with GCA or thermometer)
• Cone mounted 10mm stainless steel barbed sample valve
• 19mm bottom mounted stainless steel dump valve
• Adjustable and removable legs with castor wheels

SPECIFICATIONS

SIZE: 866 x 394 (h x d)

WEIGHT: 10kg

CAPACITY: 50L

POWER: None

CONNECTIVITY: None

Click here for the SF70 technical specifications.

The Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18 L of water making the brewing process even easier by having the right amount of sparge water heated to the right temperature ready at the time of sparge.

Start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. Also comes with a sight glass, tap and heating lights.

NOTE: Graduations on the scale are measured from the tap.

SPECIFICATIONS

18 L Capacity
Stainless Steel Body
2 kw Element
Sight Glass (with 1 L graduations visible)
Tap
Temperature Control
Heating Lights (to indicate input temperature has been reached or is still being heated)

DIMENSIONS

Height to top of lid: 540mm
Body diameter: 275mm
Handle to handle: 350mm
Dispensing tap: 75mm

The 25L Sparge Water Heater is designed to be used with brewing systems of up to 40L, making it the perfect companion for the G40 or the G30. This temperature-controlled urn allows you to heat up to 25L of water in preparation to sparge, reducing the time and effort of heating additional sparge water during your brew, making your brew days even easier.

Specifications

• 304 grade stainless steel with a brushed finish.
• 25L capacity
• 2250W
• Heats up to 25L (6.6 US Gal) of sparge water in approx. 50 minutes.
• One piece structure for easy cleaning.
• Cool touch lid, with a twisted lock for safety purposes.
• Water gauge indication with an easy to use ball valve tap for dispensing water.
• 45-110°C variable thermostat to heat your water to the desired temperature.
• Heating lights to indicate when the temperature has been reached or still heating.
• Concealed heating element.

With the Grainfather Sparge Water Heater 40L, you can heat and keep up to 40L of sparge water at a specified temperature until it's needed. This means you can focus on the rest of your brew day, without having to worry about how or when you're going to heat a large volume of sparge water, and avoid the need to use 2 (or more) smaller volume heaters.

The unit heats up to 40L (10.6 US Gal) of sparge water in approx. 50 minutes, so you can simply start heating during the mash, and can forget about it until it's time to sparge.

Full Product Specs:

• Easy to read water level markings.
• Thermostat to heat water to your desired temperature, as well as boil.
• Easy to use ball valve tap for dispensing water.
• Heats up to 40 L (10.6 US Gal) of sparge water in approx. 50 minutes.
• 304 grade stainless steel.

A great solution for taking 2 L of beer from your keg to wherever you need to go, be it inside or to the party or simply to the other side of the room!

Made from high grade stainless steel, and insulated to keep your beer chilled.

Specifications

304 grade stainless steel
Double walled with vacuum insulation
Flip top lid
2 L capacity