Search results

8L Keg Oxebar Monolayer Keg With Cap and Handle (PCO38)

This great value re-usable plastic keg is the best way to store your home brew in a smaller sized container than traditional 19 litre corny kegs. The small 8 liter size is convenient, light weight and perfect for sharing beverages with friends.

This 8L keg is light weight, compact and has high oxygen barrier properties with 3x better (less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

This product is sold with the PCO38 cap however if you would like to dispense this product through a draft system we recommend the use of the PCO38 Tapping Head.  The tapping head is sold separately and allows you to attach standard ball lock disconnects and add a pressure relief valve to the top of this keg design. 

What is Oxebar Mono
Oxebar Mono is a PET polymer blend that utilises several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by x3. We recommend this product for beer stored in keg up to 6 months.

Dimensions
Diameter:155mm
Height: 520mm

Do not Exceed 4 Bar / 58psi or 45°C

Periodic Hydrotesting Requirement
All pressure vessels should be hydrotested periodically.  This is a very simple process and it's nothing to be feared.  We recommend that this container be pressure tested every 2 years up to 6 bar.  The instructions for this are:
1. Remove RED PRV and fit GREY PRV (you can borrow one of these from a 19L keg.
2. Fill keg to the absolute brim with water.  DO NOT forget this step.
3. Use bike pump, CO2 regulator, air compressor or any other pressure source to pressurize the keg to 6 bar. 
4. Hold the keg at 6 bar for 1 minute.
5. Release the pressure and immediately remove GREY prv and swap back to RED prv.
Note: This test should be done with the keg and water in the keg at room temperature 15-30°C

From: Kegland

Take the work out of cleaning corny kegs, carboys and brewing vessels with the Bucket Blaster keg and fermenter cleaner. The Bucket Blaster is a great way to get your kegs, fermenters, fermzilla, carboy's or other brewery gear clean while you attend to other tasks.

Simply set up the keg washer basin with your cleaner or sanitiser, set a keg or carboy on over the jet nozzle, power up pump and let the keg washer do the work.

This unit comes with a 15L bucket which doubles as a storage container when you are not using the system. Some other keg washers come with a very small reservoir making it a pain to move, liquid spills over the sides easily and generally they just do not work as well. This unit has a large 15L bucket making it much less likely for you to spill liquid on your floor.

This system includes a 2000 litre per hour pump, the 15L bucket, a powerful jet nozzle, 3/8 EVABarrier tubing, a Duotight tee piece, a grey and a black ball lock disconnect and the stainless stand.

You can find instructions on how to assemble, operate, and maintain the bucket blaster here.

From: Kegland

3 x Quality hose connectors to fit your Pure Distilling condenser snap on hose fittings or other hose fittings.

John Guest fittings are widely used across the commercial beer and beverage industry and are well known for being reliable high quality push fit fittings. Pushing tube into the fitting is all that is needed to produce an instant but permanent leakproof connection.

The fittings are just as easy to disconnect and re-use without the need for replacement parts.

The Equal Tee 8mm can be used split gas lines or other tubing.

The Precision Plus CO2 Regulator is the perfect choice for ensuring precise and consistent control over the CO2 levels in your beverage dispensing system. With a sleek chrome-plated finish, this regulator not only performs exceptionally but also adds a touch of elegance to your setup.

Designed with a robust construction and advanced features, it guarantees reliability and durability for both commercial and home use. The regulator comes equipped with a 0-60 PSI outlet connection, and a 0-3000 PSI inlet connection, making it versatile for various applications. Additionally, the double inlet filter with 200 microns and 100 microns capacity ensures clean and smooth operation.

The Precision Plus CO2 Regulator is ideal for a variety of beverage dispensing systems, including beer kegerators, soda machines, and other CO2-powered applications. It ensures that your beverages are carbonated to perfection, offering consistent performance whether in a commercial bar or restaurant setting or for home use. The robust construction and precise control make it a reliable choice for anyone looking to maintain optimal CO2 levels in their beverage dispensing system.

• Chrome-plated finish for durability and aesthetics
• Single outlet design simplifies CO2 distribution
• 0-60 PSI outlet connection allows for accurate CO2 pressure adjustments
• 0-3000 PSI inlet connection handles high-pressure inputs effectively
• Double inlet filter (200 microns/100 microns) provides superior filtration

Now with 8mm push-fit outlet.

This regulator comes with a tamper evident cap. Tamper evident caps help ensure consistent dispensing pressure, which is crucial for quality control in beverage dispensing. Prevent unauthorised or accidental manipulation of the pressure settings on your CO2 system. Improperly adjusted CO2 pressure can lead to over-carbonation or under-carbonation of beverages, which can affect taste and safety. It is quick and easy to install the tamper evident cap by following these steps.

From: Krome Dispense

Reconditioned steel 7 lb (3.2kg) CO2 cylinder with a high quality valve. A compact, durable tank.

Although this is a “used” CO2 cylinder, in reality, it’s good as new. That’s because this tank has been reconditioned to the highest standard. It has been fully tested and certified in addition to adding a brand new black galv undercoat and enamel top coat paint finish.

Construction and Features

• Durable steel body
• Quality & durable painted exterior in grey
• High quality valve with pressure relief device (PRD)
  
• Square base for added stability
• Tank comes full

Not available for shipping. Store Pick Up Only

Digital Illuminated Mini Gauge 0-90psi (0-6.2bar) - Duotight 8mm Stem.

Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age old technique works quite well especially in large gauges, but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges, such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.

Kegland has developed the worlds most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions is required.

Specifications:
Battery Life: More than 2 years (using the mini gauge once a day)
Battery Type: CR2032
Auto Battery Saver: YES, screen automatically turns off after 15sec
Size: 27mm x 27mm
Duotight Stem: 8mm

NOTE: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge.  If you want to measure liquid pressure you can purchase one of these analogue gauges:

KL07696 - Duotight Compatible Push in Pressure Gauge

From: Kegland

Yellow Plastic Carbonation and Line Cleaning Cap or FermZilla Pressure Cap.

These carbonation caps are now available in yellow to help differentiate between gas and liquid posts. Liquid = Gold is all you need to remember. Add your silicone dip tube to this cap and never risk accidentally attaching your gas line. Note: It is a multi post, so it will take both gas or liquid if you want to change it up.

Need to clean your beer line? Carbonate your beer quickly? Or simply want to take a traveller over to a mates? Then do yourself a favour and grab one of these essential tools for your brewing needs.

Liquid and Gas ball lock compatible.

This carbonation cap is also suited to any of the FermZilla products such as the FermZilla Pressure kit.

This product is made from high quality engineering plastic and will last a very long time.  It's chemically resistant and also designed ot resist impact and physical damage.

The thread specification on this product is the PCO 1881 (AKA Coke bottle thread).

From: Kegland

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

The 5L can be used as a growler without the ball lock cap - perfect for filling up at your favourite tap room or brewery!

• Portable size
• Pressure carbonate (using the ball lock cap)
• Stainless steel body
• Handles for easy transportation

Perfect for spraying down brewing equipment with dissolved cleaners or sanitisers.

Ideal for coupling with Multi-Post for Power Sprayer to turn the sprayer into a pressurised line cleaning device.

Includes:
1L Reservoir Tank
Power Sprayer Nozzle and Dip Tube
White plastic adjustment head sprayer
15cm USB C to Standard USB (for charging purposes)

Food Grade
This product is made from food grade, Santoprene, PP, PE, Silicone and Stainless Components.

Battery Life
The pump has large 18650 li-ion rechargeable battery. On a full charge the battery will empty the 1L tank 18-30 times so it lasts for ages.
NOTE: If you use fine mist it will be closer to 18 times but if you use a jet/stream the battery will last closer to 30 times.

Does Not Include:
USB wall charger
Multi-Post for Power Sprayer

From: Kegland

A beer tap plug to cover the end of the faucet - for controlling fruit flies, yeast and bacteria buildup when not in use.

These unique silicone faucet plugs are a universal size so they suit any tap faucet of a diameter 10mm up to 17mm. Perfect for Nukatap and Intertap taps.

The plug is an economical solution for controlling fruit flies, yeast, and bacteria bulidup when the faucet is not in use.

The silicone compound is resistant to caustic and acid-based cleaners as well as high temperature so it is dishwasher safe.

This item also has a dual-use with the BrewZilla Overflow pipe seal for filling the malt pipe with your grain bill.

Features:
- Food grade silicone
- Fits all Nukatap taps, pluto guns, fermenter taps, and many other tap designs

Note: only available in black. Nukatap tap not included.

NukaTap Black Plastic Tap Handle - Long Slender Type.

Need something to grab onto to pull a beer out of your new bright and shiny new NukaTap tap? Then it sounds like you need the stock standard black plastic tap handle. 

Length: 66.6mm

From: Kegland

Looking for a similar handle but with a threaded brass insert? Try this one.

A rugged and durable push fit, inline filter strainer. 

Available in both 8mm and 10mm push fit size.

The detachable cap and body allow for easy servicing and cleaning.

Do not apply excessive vibration, torque, shock or other strong loads to the filter as the filter body may damage or collets may be dislocated.

Filter grade: 100 mesh
Colour: Black
Max. Pressure: 170psi
Temperature: Air -20C, Liquid 65C
Height: approx. 70mm

Nukatap - the latest in beer dispensing tap technology. Now available in black with stainless spout.

What makes the Nukatap different among the other manufactured styles of taps on the market?
- First Pour Foam Reduction in Thermal Mass
- Improved Laminar Flow
- Most Sanitary Forward Sealing Design Design
- Longer Life Seals
- Move Versatile Tap Handle Angle

First Pour Foam Reduction
The reduction in thermal mass significantly reduces the first pour foam effect. The tap is often the warmest part of the draft system as it protrudes from the font/tower/fridge. As a result, it acts like a heat sink and only works well once enough cold beer flows through it to cool the tap body down. This reduction of thermal mass significantly improves the foam that is poured while the tap is cooling down.

Laminar Flow
The Nukashuttle design is the world’s first seamless shuttle. After many months of modelling and testing this new "Nuke" shaped shuttle design has the most fluid dynamic shuttle shape ever manufactured for a forward sealing tap. The streamline "nuke/missile" shape is how this new innovation earned its name "Nukatap". This leap forward in laminar flow means even highly carbonated beers pour like a dream with minimal turbulence and giving you the perfect pour every time.

Most Sanitary Design
The Nukashuttle is the world’s first seamless single-piece design. Traditional taps have a seal that is seated on a stainless-steel body creating small fissures that harbour solids, are potential sites for infection, and are not as ideal for clean in place (CIP). The Nukashuttle is an advanced TPV rubber matrix that been seamlessly formed over a durable PP skeleton. This single-piece design takes away the traditional fissures found in older manufacturing methods.

Long Life Seals
Unlike many other taps that use rubbers that can be degraded with caustic and acid compounds, the Nukatap has been made to suit a wide range of conditions. It's becoming more common to see sour beers/kombucha and other acetic and lactic acid beverages dispensed using draft systems. These acids, in particular, could cause an attack on the sealing compounds resulting in downtime, loss of product and reduced maintenance intervals. The Nukatap solves this problem and is the most chemically resistant tap we have ever manufactured. Unlike some older tap styles that have "metal on metal" rubbing components that can wear over time and have a "raspy feel" the Nukatap has been manufactured with a smooth gliding action that guarantees the longevity of the tap components. The TPV rubber matrix shuttle is also one of the most durable sealing mechanisms that can tolerate large amounts of leverage force from long tap handles that would otherwise traditionally degrade the seals in other tap designs. Other forward sealing designs exist but nothing with the same level of reliability. It’s easy to find other “perl” forward sealing design taps however these taps use a floating o-ring design which by all means is equally as sanitary however the floating o-ring requires the o-ring to move within the tap body to seal correctly. This movement is typically a problem as the tap ages and/or is not serviced regularly. The Nukatap bypasses this seal as the entire Nukashuttle is a single sealing piece.

Tap Handle Angle - 2.5degree Reverse Angle
The Nukataps have been manufactured with a 2.5 degree reverse angle. This allows for a wider range of taps handles to be used, in particular, long and/or heavy handles to work perfectly irrespective of the installation conditions.

Forward Sealing Design
Just like the Intertap and its predecessors, the Nukatap shuts off the flow at the front of the tap which in turn keeps wild yeast and bacteria out of the interior of the tap body.

What does Rear Sealing Design Mean?
Typically most beer taps use a rear sealing design and the beer in the tap drains from the body of the tap with the help from a vent hole drilled at the front of the tap. This drainage hole is a dark and wet cavity and is an ideal place for airborne bacteria and wild yeast to reproduce leaving a foul film that deteriorates the quality of your beer. Every time the faucet is opened contamination can occur.

Compatible with Intertap and Nukatap accessories:
- Auto-Close Spring
- Stout Spout
- Ball Lock Post Spout
- Growler Spout

From: Kegland

Easily attach to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer. This also ensures less chance of oxygen entering the beer during transfer.

All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe.

NOTE: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed.

Specifications

High quality 304 stainless steel components
Accurate digital pressure gauge
Needle valve for precise control of pressure

Duotight - 9.5mm (3/8”) Female x ½" Male Thread Ball Valve.

It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. 

These push in fittings are suitable to be used up to 100 psi.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

Note: colour may vary.

From: Kegland

Duotight - 9.5mm (3/8") Check Valve (Gas).

This elbow piece is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.

Due to the fact that this check valve cannot be taken apart to clean, we do not recommend it to be used with liquid.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. 

These push in fittings are suitable to be used up to 100 psi.

Compared to other push in fittings on the market, Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.

From: Kegland