Search results

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

The 5L can be used as a growler without the ball lock cap - perfect for filling up at your favourite tap room or brewery!

• Portable size
• Pressure carbonate (using the ball lock cap)
• Stainless steel body
• Handles for easy transportation

Duotight - 9.5mm (3/8”) Female x ½" Male Thread Ball Valve.

It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. 

These push in fittings are suitable to be used up to 100 psi.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

Note: colour may vary.

From: Kegland

These seals replace the red o-ring seal inside the 20L Oxebar kegs.

Includes:
5 x Low2 Keg Lid Seals to suit the 20L Oxebar Keg (Yellow)

These seals replace the red o-ring seal inside the 20L Oxebar keg lids.

What is Low2?
Low2 O-Rings are the new golden yellow standard of homebrew kegs brought to you by KegLand Australia. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.

The same material O-Ring (Low2) were independently tested on the 19L stainless steel kegs by GunnLab. 

From: Kegland

A replacement o-ring for the 30L and 60L barrel fermenter lid.

An insulated, neoprene jacket for mini kegs with glow-in-the-dark Kegland branding. Great for BBQs, camping, or parties.

Features:

1. 8mm thick neoprene. Most other keg jackets are only 4mm meaning they simply do not insulate as well.
2. 16gram CO2 bulb pockets.
3. Velcro around the top so you can attach various accessories.
4. Comes with heavy duty webbing shoulder strap.

From: Kegland

A Ball Lock Gas Post for corny kegs. 

Note: Poppet not included but can be purchased separately..

Brewzilla 35L - Recirculation Arm Extender for Boiler Extension | Suits 35L and 65L BrewZilla.

Recirculate with ease with the Male to Female Camlock Extender!

From: Kegland

This mini draft tapping head will turn your growler into a portable keg system.

The growler is purchase separately and can be purchased at this link: Ultimate Vacuum Insulated Growler

This convenient growler tapping head is the best way to keep your precious beer fresh and carbonated in the beer. The pressure applied by CO2 will keep your beer away from damaging oxygen and keep the beer carbonated for ages.

The vacuum walled growler will also keep the beer cold for ages meaning you don't even need a chilly bin or cooler box.

This system doesn't include the regulator, growler or co2 bulbs. These can be purchased separately.

RAPT Pill - Red Housing.

This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing, the double o-rings, or the circuit board.

From: Kegland

Nukatap - the latest in beer dispensing tap technology. Now available in black with stainless spout.

What makes the Nukatap different among the other manufactured styles of taps on the market?
- First Pour Foam Reduction in Thermal Mass
- Improved Laminar Flow
- Most Sanitary Forward Sealing Design Design
- Longer Life Seals
- Move Versatile Tap Handle Angle

First Pour Foam Reduction
The reduction in thermal mass significantly reduces the first pour foam effect. The tap is often the warmest part of the draft system as it protrudes from the font/tower/fridge. As a result, it acts like a heat sink and only works well once enough cold beer flows through it to cool the tap body down. This reduction of thermal mass significantly improves the foam that is poured while the tap is cooling down.

Laminar Flow
The Nukashuttle design is the world’s first seamless shuttle. After many months of modelling and testing this new "Nuke" shaped shuttle design has the most fluid dynamic shuttle shape ever manufactured for a forward sealing tap. The streamline "nuke/missile" shape is how this new innovation earned its name "Nukatap". This leap forward in laminar flow means even highly carbonated beers pour like a dream with minimal turbulence and giving you the perfect pour every time.

Most Sanitary Design
The Nukashuttle is the world’s first seamless single-piece design. Traditional taps have a seal that is seated on a stainless-steel body creating small fissures that harbour solids, are potential sites for infection, and are not as ideal for clean in place (CIP). The Nukashuttle is an advanced TPV rubber matrix that been seamlessly formed over a durable PP skeleton. This single-piece design takes away the traditional fissures found in older manufacturing methods.

Long Life Seals
Unlike many other taps that use rubbers that can be degraded with caustic and acid compounds, the Nukatap has been made to suit a wide range of conditions. It's becoming more common to see sour beers/kombucha and other acetic and lactic acid beverages dispensed using draft systems. These acids, in particular, could cause an attack on the sealing compounds resulting in downtime, loss of product and reduced maintenance intervals. The Nukatap solves this problem and is the most chemically resistant tap we have ever manufactured. Unlike some older tap styles that have "metal on metal" rubbing components that can wear over time and have a "raspy feel" the Nukatap has been manufactured with a smooth gliding action that guarantees the longevity of the tap components. The TPV rubber matrix shuttle is also one of the most durable sealing mechanisms that can tolerate large amounts of leverage force from long tap handles that would otherwise traditionally degrade the seals in other tap designs. Other forward sealing designs exist but nothing with the same level of reliability. It’s easy to find other “perl” forward sealing design taps however these taps use a floating o-ring design which by all means is equally as sanitary however the floating o-ring requires the o-ring to move within the tap body to seal correctly. This movement is typically a problem as the tap ages and/or is not serviced regularly. The Nukatap bypasses this seal as the entire Nukashuttle is a single sealing piece.

Tap Handle Angle - 2.5degree Reverse Angle
The Nukataps have been manufactured with a 2.5 degree reverse angle. This allows for a wider range of taps handles to be used, in particular, long and/or heavy handles to work perfectly irrespective of the installation conditions.

Forward Sealing Design
Just like the Intertap and its predecessors, the Nukatap shuts off the flow at the front of the tap which in turn keeps wild yeast and bacteria out of the interior of the tap body.

What does Rear Sealing Design Mean?
Typically most beer taps use a rear sealing design and the beer in the tap drains from the body of the tap with the help from a vent hole drilled at the front of the tap. This drainage hole is a dark and wet cavity and is an ideal place for airborne bacteria and wild yeast to reproduce leaving a foul film that deteriorates the quality of your beer. Every time the faucet is opened contamination can occur.

Compatible with Intertap and Nukatap accessories:
- Auto-Close Spring
- Stout Spout
- Ball Lock Post Spout
- Growler Spout

From: Kegland

Seal Kit - duotight 8mm x Flow Control Ball Lock Disconnect

Please refer to the product photos for an exploded diagram of where the replacement seals and poppet placement. 

This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 65L Gen 4 BrewZilla.

This is for he 25w pump model - you'll find the 6w pump tubing kit here.

Made from food grade silicone and temperature resistant to 180°C.

From: Kegland

Camlock - Male to 1/2" Barb (E Type).

Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.

FermZilla Temp Twister Lid - predrilled and including o-ring.

Take the pain and risk away from drilling your own Temp Twister Ports and Thermowell for your FermZilla. We've done the tricky work for you!

Does not include
1 x Red Gas Carbonation Cap
1 x Yellow Carbonation Cap
1 x Red 35psi OR 17psi Yellow Pressure Relief Valve (safety device)
1 x 60cm Thermowell Kit
1 x Temp Twister
1 x G20 Pump Up or G40 Pump Up/
1 x FermZilla All Rounder or Conical

Suits:
60L All Rounder FermZilla
55L Conical FermZilla
30L All Rounder FermZilla
30L Flat Bottom FermZilla (Not pressure rated)
27L Conical FermZilla

From: Kegland

Fan Tip Bottle Brush with long handle making it ideal for cleaning plastic and glass beer bottles.

From: Kegland

PCO1881 PRV Cap

This cap has been designed to be used with the PCO38 Tapping Head for the PET Mini Keg Range. 

As it is a standard PET bottle thread (PCO1881). it can also be used on the FermZilla Collection Container / Lid.

Use with any of the four PRV valves (sold separately) - 17, 35, 65, 100PSI.

Please Note: Never exceed the pressure capabilities of your vessel. PRV's are not spunding valves!

From: Kegland

A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").

Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm

Note there is no tail piece included but a separate tail piece, nut and washer are offered as additional options.

Alternatively a Duotight 8mm - 5/8" Thread can be used.

Length: approx. 79mm (3-1/8"), 105mm (4-1/8"), or 130mm (5-1/8")
Usable length: approx. 50mm, 65mm or 80mm
Bore size: approx. 4.76mm (3/16")
Material: Stainless Steel
Made by: Krome Dispense

The Heat Resistant Gloves / HIZO Oven Mitts are as impressive as they are functional with the ability to handle contact with temperatures of up to 500° Celsius (932°F). This means that it is perfect for use with oven baking, hot pots, grilling, barbecuing, and woodstoves.

Fashioned with high-quality aramid fibers which work to insulate and protect hands from burning temperatures, these gloves have a comfortable cotton and polyester lining which allows for breathability to resist sweating and a gauntlet-length style of design to protect wrists and forearm from scorching heat as well. These gloves are thick to provide excellent thermal protection and durability, but they are lightweight for extended use without fatigue.

Sizing: Medium only

With heat resistance up to 500°C, these gloves are perfect for:

• Perfect for oven baking, hot pots, grilling, barbecuing, and woodstoves
• Adjusting logs in the fireplace
• Touching scorching hot utensils or food while boiling or frying
• Changing light bulbs

Features:

• High-quality aramid fibers for insulation and cotton and polyester lining
• Designed for mobility and flexibility in mind
• Food-grade silicone layer
• Machine-washable, and can be easily hung on the line to dry

From: Kegland

Duotight 8mm (5/16) one way check valve/non-return valve.

This very handy fitting could save your regulator and is a good investment. This particular type of check valve has low opening pressure of only 1 psi. It is suitable for clean liquids such as water or for gas. The spring and internal components are made with stainless steel and quality EPDM seals.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. 

Fits 8mm outer diameter tube. 

Note: colour may vary.

From: Kegland

This Pressure Filler Cap makes transferring beer to a bottle easy! If you keg your beer and want to take a few bottles for you to drink or your friends to try, this is the perfect piece of equipment for you. It can also be used to 
carbonate your beer or water or used to clean your beer lines. 

This fits both the black/liquid and grey/gas ball lock disconnects and has a barb tail that fits 6mm tubing if you wish to use this when filling bottles.