Search results
367 results
Sort by:
367 results
Search results
A complete set of fittings to connect the G40 & G70 Distilling Lid to the Still Spirits T500 Reflux Condenser (stainless steel or copper) for reflux distilling.
The G40 or the G70 paired with the Distilling Lid and T500 Reflux Condenser Attachment Kit offers an all-in-one automated brewing system that can also be used for reflux distillation, making it the ultimate combo to brew high-quality beer and distill neutral spirits.
INCLUDES
• 2” to ½” (48mm) DN40 Thread Adapter
• 2” Tri-Clamp Seal with Mesh
• 2” Tri-Clamp
• 4” to 2” Tri-Clamp reducer
• 4” Tri-Clamp Seal
• 4” Tri-Clamp
• 304 Grade Stainless Steel Construction
Note: Distilling Lid and T500 Reflux Condenser sold separately
- Brewer's Grade 304 Ss
- Installs into 17mm punched / drilled hole
- 6.5 mm inner diameter of tube opening
Usually available in these sizes:
- 100mm
- 200mm
- 300mm
Includes one o-ring.
From: Ss Brewing Technologies, USA
Dual Valve Tap with 110 mm (4.3”) liquid inlet for the Grainfather conical fermenter.Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through a valve above the sediment line, allowing for clear, sediment free beer. Collect your yeast from below the sediment line for recultivating and pitching.
Specifications
304 Stainless Steel
Can be completely disassembled for thorough cleaning
A rubber stopper (bung) with a diameter of approximately 50mm across the top, tapering to a diameter of approximately 41mm at the bottom. Fits the 23 Litre Plastic Carboy and 11.5 Litre Plastic Carboy.
John Guest fittings are widely used across the commercial beer and beverage industry and are well known for being reliable high quality push fit fittings. Pushing tube into the fitting is all that is needed to produce an instant but permanent leakproof connection.
The fittings are just as easy to disconnect and re-use without the need for replacement parts.
The Two Way Divider quickly and easily splits a line into two separate lines.
Hand tighten only. Over tightening could damage the fitting.
| Part No. | TUBE OD | THREAD NPTF |
|---|---|---|
| PM2308S | 5/16" (8mm) | N/A |
- Push-fit technology
- Quick disconnection without the need for tools
- Food Quality and suitable for potable liquids
- Suitable for soft metal or plastic tubes
- Suitable for air or inert gases
- Superior flow characteristics
Please refer to the technical specifications before use.
A 304 stainless steel tri clover fitting that will allow you to connect 1.5″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.
Bulkhead fits hole approximately 42mm in diameter.
FermZilla Tri-Conical - 2 Inch x 2 Inch Tri-Clamp Butterfly Valve.
Compatible with any 2 Inch tri-clamp fitting. Primarily designed for the:
- FermZilla 2" Tri-Clamp Lid
- in conjunction with the 2" Tri-Clamp Hop Bong
If you are looking to put your FermZilla Tri-Conical / All Rounder in a Fermentation Chamber / Fridge, you will want to allow 420mm measured from the base of the ring collar to a comfortable level to pull the pressure relief valve to purge oxygen from the hop bong.
From: Kegland
The Wort Whipper - Super Compact Adjustable Magnetic Stirrer Machine.
Now even more compact than ever! Measuring at just 28mm high and 120mm wide this little sucker can punch a huge amount of power through to your stir bar.
Recommended Power = Low (just enough to suspend the yeast, not a super vortex).
Dial up from off with the bar in the middle of your Erlenmeyer Flask until you just start to see a small vortex forming at the top, then dial a bit off that. You don't need a crazy amount of vortex to make a good starter. You just need to keep the yeast suspended.
If you're new to brewing you'll soon learn that healthy yeast makes better beer. The best place to start with making healthy yeast is to build up their numbers. Use an online calculator to find out how much yeast you need to build up to get the best possible beer fermented. Use either a 2000mL or a 5000mL Conical Erlenmeyer flask. You'll be able to make a varying range of yeast starters depending on your batch size.
Includes:
- Magnetic Stir Bar
- 1m 12v Plug Adaptor
Note: Erlenmeyer Flask in photo is not included.
From: Kegland
A 1.5" tri-clamp thermowell fitting from Krome Dispense that is approx. 15cm long.
- 304 Stainless Steel
- Approx. 15cm thermowell
Does not include tri-clamp clamp or gasket.
From: Krome Dispense
Lead free brass adaptor that screws into the lid of the Pure Distilling Boiler and attaches to a triclover fitting.
The G40 & G70 Distilling Lid plus the complete set of fittings to connect the T500 Reflux Condenser (stainless steel or copper) to either the G40 or the G70 for reflux distilling.
The ultimate bundle to pair with the T500 Reflux Condenser stainless steel or copper), allowing you to turn your G40 or G70 Brewing System into an all-in-one automated brewing system that can also be used for reflux distillation. Bundle includes the G40 & G70 Distilling Lid plus the T500 Reflux Condenser Attachment Kit so you can brew high quality beer and distill neutral spirits.
INCLUDES
- G40 & G70 Distilling Lid
- Standard 4" tri-clamp opening (industry standard)
- Pressure relief valve
- Barrel clamp locking mechanism
- 2” to ½” (48mm) DN40 Thread Adapter
- 2” Tri-Clamp Seal with Mesh
- 2” Tri-Clamp
- 4” to 2” Tri-Clamp reducer
- 4” Tri-Clamp Seal
- 4” Tri-Clamp
- 304 Grade Stainless Steel Construction
Note: T500 Reflux Condenser sold separately
Easily attach to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer. This also ensures less chance of oxygen entering the beer during transfer.
All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe.
NOTE: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed.
Specifications
High quality 304 stainless steel components
Accurate digital pressure gauge
Needle valve for precise control of pressure
A 1/2 inch (12.7mm) Cross.
- BSP Threaded Ends
- Working Pressure: 150lbs (psi) / 10bar
- Working Temperature: 250°C at 10bar
- 316 Stainless Steel
A - 25mm