Search results

Your all-in-one solution for kegging. This lightweight, durable aluminium cylinder is pre-filled with 3.5kg of food-grade CO2, ready to carbonate and serve your homebrew with reliability and ease.

Not available for shipping. Store Pick Up Only

Braided Reinforced Heavy Duty Silicone Hose - 10m Roll (12mm ID x 20mm OD).

Properties:
Odorless, tasteless and inert
Good Electrical and weatherability properties
Resists UV, Ozone, gases and moisture

Features:
Working Temperatures -60°C ~ 260°C
Working Pressure: 58-580 psi

Applications:
Commercial brewery hot and cold side transfers

Length: 10m
From: Kegland

Duotight - 8mm x 9.5mm Reducer.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.

These push in fittings are suitable to be used up to 100 psi.

These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.

From: Kegland

The Black Phantom Font Kit is the perfect match for your Black Punisher or Stealth Bomber Nukataps. Made of high quality 304 stainless with a classy matte black finish, it is sure to add a touch of panache to your kegerator!

This duotight font kit includes:

1. Triple Tap Black Punisher Stainless Font Only (includes gasket)
2. 3 x duotight compatible Short Shank
3. 3 x Black Plastic Tap Handle
4. Pre-Cut - 4mm ID x 8mm OD Evabarrier Beer Line and 5mm ID x 8mm OD Evabarrier Gas Line.
5. 3 x duotight 6.5mm x 8mm push in fittings to easily join the beer line to the tap shank
6. 4 x Metric M5 stainless screws to secure the font to the fridge
7. 2 x duotight tee pieces for the gas line
8. A 7 in 1 tool for assembly

Please note: Nukataps are not included

These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer.

Specs:

• 320mm Tall (without taps)
• 78mm Diameter
• Base Collar Diameter 111mm
• Internal Foam Insulation

Please note: handle with care. Scratches will be more visible than the Brushed Stainless Steel model.

This font kit has been designed to suit the Series 4, Series X and Grand Deluxe Ranges of Kegerators.

The holes in the flange are pre-drilled so they can be attached easily using the metric M5 screws.

From: Kegland

A seal kit for the Mini 360 Core Actuator Regulator. Contains the o-rings for the piston, the red inlet washer, MK4 seat assembly o-ring, 2 x barbMFL outlet o-rings and x thumb screw o-rings.

For instructions on replacing the seals and/or general maintenance please refer to the product manual here.

From: Kegland

This really handy device is great for filling kegs, keg to keg transfers or fermenter to keg transfers.

Fantastic for use with Fermentasaurus or other pressurisable fermenters.

Simply attach this device to the output gas post of your Keg then when the keg is full it will prevent further liquid exiting the gas post. This means you can literally set and forget and fill kegs automatically without the risk of kegs overflowing all over the floor.

For even better results we recommend this product to be used with the Duotight - BlowTie Diaphram Spunding Valve - Adjustable PRV.  This blowtie spunding valve will also enable to to apply head pressure to the keg meaning you can control the flow speed but also reduce the foam generated in the filling process particularly for carbonated beverages like beer.

This flow stopper includes:

• 2 x duotight 8mm x 5/8 push in fittings
• 1 x ball float
• 1 x stainless spring
• 2 x straight 8mm joiners
• 1 x acrylic sight glass (with 5/8 male thread on either side)

Digital Illuminated Mini Gauge 0-90psi (0-6.2bar) for Integrated Blowtie and In-line regulators.

Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.

Kegland has developed this compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions is required.

Specifications:
Battery Life: More than 2 years (using the mini gauge once a day)
Battery Type: CR2032
Auto Battery Saver: Yes, screen automatically turns off after 15sec
Size: 27mm x 27mm
Radial O-ring Stem: 7.8mm Bore

NOTE: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge.  If you want to measure liquid pressure you can purchase one of these analogue gauges:

This digital mini gauge can be used to upgrade your:
Blowtie Spunding Valve
Inline Regulator
Core 360 Mini Regulator

If you would like to use the mini gauge to attach to other hobbie projects then you should consider the Duotight Compatible Digital Mini Gauge with part number KL18081 that has the 8mm duotight push in stem.  This makes it easy to fit to other 8mm duotight fittings, tubing etc.

From: Kegland

Duotight - 9.5mm (3/8") Female x 1/2" Female Thread.

It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. 

These push in fittings are suitable to be used up to 100 psi.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

Note: colour may vary.

From: Kegland

Duotight - 9.5mm (3/8”) Female x 1/2 Male Thread.

It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. 

These push in fittings are suitable to be used up to 100 psi.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

Note: colour may vary.

From: Kegland

Nukatap Concave / Angle Collar - Black

This is the hard reinforced plastic piece that wedges between the beer tower font and the shank.

If you are wanting to mix up your Kegerator / Draught System with a bit of black flair, this would be a great place to start if you already have Stainless Steel Shanks and don't want to spend money on an entire shank again.

It is important to note to be gentle with these black parts as scratches will show up more clearly compared to the Stainless Steel look versions.

Note: shank not included.

From: Kegland

This manifold splits one line into six, each with a check valve. The check valve can also be removed if you want gas or water to move freely in both directions.

If you want to cap off certain lines, we would recommend using the Duotight - 8mm (5/16') Plug 

Using a thin flat headed screw driver, simply slide/pop the black retainer tabs and remove the ball valve.

The Duotight 8mm 2-way manifold is ready with mounting capabilities out of the box using button head screws. But if you're going to mount it on a kegerator, we would suggest using the Duotight 8mm adhesive brackets (no drilling required).

Not suitable for liquids other than filtered water.

Looking for high quality push in fittings that will seal tight?  Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Compatible with:
EVABarrier 4mm ID x 8mm OD line
EVABarrier 5mm ID x 8mm OD line
Red EVABarrier 5mm ID x 8mm OD line
Black Lightshield EVABarrier 4mm ID x 8mm OD line
Not compatible with 6.3mm ID x 9.5mm OD line

No clamps necessary! 
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

These push-in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push-in fittings on the market, Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push-ins on the market have EPDM o-rings, let alone two! per push-in connection.

From: Kegland

The MFL Tap Shank Adapter is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.

We recommend using one of the Flow Control Nukatap with this adapter as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adapter.

Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.

Note: does not include tap or disconnect.

From: Kegland

This bracket is used to mount a Nukatap Mini in either 6.35mm or 8mm to a table or bench. Ideal for impromptu gatherings in the park!

This bracket is compatible with tables that are up to 90mm thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side.

Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket.

From: Kegland

A brewing heater belt that fits around your fermenter to provide steady and constant warmth for your brew. The 30 watts will gently warm without creating a hot spot, and can be moved up or down the fermenter to increase or decrease the heat transfer to the brew.

To further control the temperature of your fermentation, combine with a RAPT Temperature Controller or similar to regulate the heater belt automatically.

Note: fermenter not included.

From: Kegland

This duotight 8mm (5/16") adaptor is designed to suit the Nukatap Mini and will allow you to couple your Nukatap mini to a wide range of other 8mm(5/16") duotight fittings or be able to attach to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adaptor. The combination of the two fittings prevents the tap spinning around while in use.

Other Parts Sold Separately

Nukatap Mini

Ball Lock Beer Duotight Disconnect - Flow Control

From: Kegland

This hose fitting is made of stainless steel and connects three lengths of hose in a branch tee. The barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp such as a stepless clamp. 

Bore sizes usually available:
- 6.35mm (1/4")
- 4.76mm (3/16")

Replacement rubber tip for the Kegland Beer Gun Bottle Filler. Sold individually.

From: Kegland