This new EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.

Outer Barrier
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.

Inner Barrier
The inner barrier is made from a proprietary polymer that provides an excellent gas barrier. The significantly better barrier properties means your beer is better protected from oxygen and also has a better barrier to CO2 loss. So your beer will stay fresher for longer and not loose carbonation like other beer line types. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.

Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.

The amount of beer line required to achieve a balanced system and avoid a glass full of foam depends on a number of different variables. Here is a link to a calculator that will help you determine the amount of line required to help you pour foam free beer.

Price is per metre - order as many metres as required

6.3mm internal (9.5mm external)

Pressure Rating (with 1.5 safety factor):
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

From: Kegland

A 12m roll of EVABarrier line.

Looking to purchase by the meter, then you'll find it here.

This new EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.

Outer Barrier
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.

Inner Barrier
The inner barrier is made from a proprietary polymer that provides an excellent gas barrier. The significantly better barrier properties means your beer is better protected from oxygen and also has a better barrier to CO2 loss. So your beer will stay fresher for longer and not loose carbonation like other beer line types. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.

Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.

Dimensions/Options:
4mm internal (8mm external)
5mm internal (8mm external)

Pressure Rating (with 1.5 safety factor):
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

Length: 12m
From: Kegland

This mini draft tapping head will turn your growler into a portable keg system.

The growler is purchase separately and can be purchased at this link: Ultimate Vacuum Insulated Growler

This convenient growler tapping head is the best way to keep your precious beer fresh and carbonated in the beer. The pressure applied by CO2 will keep your beer away from damaging oxygen and keep the beer carbonated for ages.

The vacuum walled growler will also keep the beer cold for ages meaning you don't even need a chilly bin or cooler box.

This system doesn't include the regulator, growler or co2 bulbs. These can be purchased separately.

Convenient hand-held beer dispensing gun for pouring stouts or nitro beers. 

The beer gun has a long narrow nozzle with a restrictor. This helps mixing nitrogen into the beer well and results in a silky pour.

• Stainless steel 304 grade construction.
• Single handle press and release easy action pouring.
• Narrow spout mixes nitrogen with the beer well. Gives the silky texture to the drink.
• Black convenient grip handle.

From: Krome Dispense

Duotight Bottle Filler Beer Gun - Gen2

Have a keg of beer, but want to fill some bottles to take with you to the game, beach, or friend's house? This beer gun is a great way to fill bottles from a keg. Every part that comes into contact with your beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling.

Now with duotight fittings as standard making the set up and pack away process extremely simple and secure.

The features, coupled with a CO2 jacketing tube for bottle purging and ergonomic valve actuators, makes filling bottles faster, intuitive, more accurate, and easier than ever! Because the Bottle Filler Beer Gun doesn't require a pressurising stopper, you can fill a bottle of any depth without buying different stem lengths or adding plastic hose extensions.

Includes:
1 x Bottle Filler Beer Gun Unit with gas and liquid trigger with silicone tip. Replacement Tips can be found here.
1 x 1/4" x 6.35mm duotight fitting
1 x Red Gas Carbonation Cap x 6.35mm Male Duotight fitting (Connect your gas ball lock line directly to the unit, no longer a permanent fitting!)
1 x 1.5-2m Length of 4mm x 8mm EVABarrier Hosing
1 x 8mm Compression x 8mm female duotight fitting elbow
1 x 8mm Duotight x yellow/black liquid ball lock disconnect

Please use the photos above as your instruction manual on how to assemble. 

We also have the non-Duotight Beer Gun Bottle Filler.

From: Kegland

Replacement rubber tip for the Kegland Beer Gun Bottle Filler. Sold individually.

From: Kegland

8mm OD Beer Line Tidy (BLT) - Beer and Gas Line Organiser.

This beer line tidy is a handle little part that will help you organise your beer and gas line inside your fridge, keezer, kegerator or cellar. Designed to suit 8mm outer diameter hosing like the 4mm x 8mm EVABarrier and 5mm x 8mm EVABarrier hosing. 

Simply remove the paper and use the strong 3M adhesive to attach this beer/gas line organiser to whatever device you like.

This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works.

From: Kegland

Bronco / Picnic Party Taps are an inexpensive way to pour beer and great for portable light weight systems that you can take away with you.

Now even better with the addition of duotights. No more hose clamps or stretching hose over barbs! It also makes it easy to disconnect and balance hosing if required.

Looking for the barbed picnic tap? You'll find it here.

From: Kegland

An excellent and economical way to be able to dispense beer from a keg when it isn't connected to your main kegging system. 

This simple to use plastic beer tap has a 6mm barb which will ideally suit 5mm ID beer line

This Tap to Keg Adapter and Coupling Nut will allow you to add a beer dispensing tap directly to your keg. Includes both adapter and faucet coupling nut.

Requires an MFL keg connector and beer tap, not included.

This handy tool is exactly what you need to fit numerous dispensing applications.

This new 7 in 1 tool is also suitable for duotight fittings so it's been improved since the older 5 in 1 tools.

Use it for these tasks:

1. Nut behind your taps (27mm Spanner)
2. Ring collar connecting your tap to the shank
3. Attaching your type 30 Regulator to your CO2 Bottle
4. FFL fitting to tighten/undo an MFL connection. (e.g. Barbed fitting on CO2 Regulator)
5. The handy dandy bottle opener
6. Remove 8mm tubing from duotight fittings
7. Remove 9.5mm tubing from duotight fittings

From: Kegland

A standard plastic handle with a threaded brass insert that fits most beer taps.

A chrome plated brass handle for beer taps. Fits most faucets.

From: Krome Dispense

A European-style plastic handle for beer taps. Fits most faucets.

NukaTap Black Plastic Tap Handle - Long Slender Type.

Need something to grab onto to pull a beer out of your new bright and shiny new NukaTap tap? Then it sounds like you need the stock standard black plastic tap handle. 

Length: 66.6mm

From: Kegland

Looking for a similar handle but with a threaded brass insert? Try this one.

A Hygiene Plug for beer faucets to help keep beer taps clean. Protects taps from fruit flies and contamination when not in use. Eliminates the time and waste of wrapping beer taps overnight.

Fits most types of beer taps. Do not completely plug Intertap/Nukatap taps.

Note: colour may vary.

From: Krome Dispense

These unique silicone faucet plugs are a universal size so they suit any tap faucet of a diameter 10mm up to 17mm. Perfect for Nukatap and Intertap taps.

The plug is an economical solution for controlling fruit flies, yeast, and bacteria bulidup when the faucet is not in use.

The silicone compound is resistant to caustic and acid-based cleaners as well as high temperature so it is dishwasher safe.

This item also has a dual-use with the BrewZilla Overflow pipe seal for filling the malt pipe with your grain bill.

Features:
- Food grade silicone
- Fits all Nukatap taps, pluto guns, fermenter taps, and many other tap designs

Note: only available in black. Nukatap tap not included.

A beer tap plug to cover the end of the faucet - for controlling fruit flies, yeast and bacteria buildup when not in use.

Our standard bench capper provides an easy way to cap your beer bottles.

It is made from steel and with rubber grip pad so your bottles don't slip off the platform

This bottle capper can be used on different size bottles as the height of the bell can be adjusted, and it can be bolted to sturdy surface.

Features:
- Easy to use and adjust to required heights depending on bottle size
- Comes with a standard bell which has a built in magnet to hold the bottle cap
- Simply place bottle caps in the bell then place the bottle underneath and pull the handle down

The capper is shipped flat-packed and needs assembling before use.

From: Kegland

Reliable, dependable, height adjustable, and easy to use, the Superautomatica Bench Bottle Capper is a top of range bottle capper. Easy to mount on a stable surface it bottles regular crown seals bottles with ease. You can also remove and replace the bell with the larger Tirage Bell (29/31mm). 

This product is of high quality and made in Italy.

FEATURES:

• Easy to use and height adjustable to virtually any bottle size

• This model comes with a standard bell which has a built in magnet to hold the bottle cap

• Place bottle caps in the bell then place the bottle underneath and pull the handle down

• Spring-mounted capping mechanism

• Long handle and easy downward pressure application on bottles for safe bottling

Replacement Bell head for the Super Automatica Bench Capper.

The Black Phantom Font Kit is the perfect match for your Black Punisher or Stealth Bomber Nukataps. Made of high quality 304 stainless with a classy matte black finish, it is sure to add a touch of panache to your kegerator!

This duotight font kit includes:

1. Double Tap Black Punisher Stainless Font Only (includes gasket)
2. 2 x duotight compatible Short Shank
3. 2 x Black Plastic Tap Handle
4. Pre-Cut - 4mm ID x 8mm OD Evabarrier Beer Line and 5mm ID x 8mm OD Evabarrier Gas Line.
5. 2 x duotight 6.5mm x 8mm push in fittings to easily join the beer line to the tap shank
6. 4 x Metric M5 stainless screws to secure the font to the fridge
7. 1 x duotight tee pieces for the gas line
8. A 7 in 1 tool for assembly

Please note: Nukataps are not included

These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer.

Specs:

• 320mm Tall (without taps)
• 78mm Diameter
• Base Collar Diameter 111mm
• Internal Foam Insulation

Please note: handle with care. Scratches will be more visible than the Brushed Stainless Steel model.

This font kit has been designed to suit the Series 4, Series X and Grand Deluxe Ranges of Kegerators.

The holes in the flange are pre-drilled so they can be attached easily using the metric M5 screws.

From: Kegland

The Black Phantom Font Kit is the perfect match for your Black Punisher or Stealth Bomber Nukataps. Made of high quality 304 stainless with a classy matte black finish, it is sure to add a touch of panache to your kegerator!

This duotight font kit includes:

1. Triple Tap Black Punisher Stainless Font Only (includes gasket)
2. 3 x duotight compatible Short Shank
3. 3 x Black Plastic Tap Handle
4. Pre-Cut - 4mm ID x 8mm OD Evabarrier Beer Line and 5mm ID x 8mm OD Evabarrier Gas Line.
5. 3 x duotight 6.5mm x 8mm push in fittings to easily join the beer line to the tap shank
6. 4 x Metric M5 stainless screws to secure the font to the fridge
7. 2 x duotight tee pieces for the gas line
8. A 7 in 1 tool for assembly

Please note: Nukataps are not included

These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer.

Specs:

• 320mm Tall (without taps)
• 78mm Diameter
• Base Collar Diameter 111mm
• Internal Foam Insulation

Please note: handle with care. Scratches will be more visible than the Brushed Stainless Steel model.

This font kit has been designed to suit the Series 4, Series X and Grand Deluxe Ranges of Kegerators.

The holes in the flange are pre-drilled so they can be attached easily using the metric M5 screws.

From: Kegland

Black Phantom Single Tap Stainless Font only.

The all new Phantom Series Black Font. The beautiful matte black finish looks great in a minimalist environment on the ever-popular Series X Kegerator.

These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer. However, the Quadruple fonts do not have any insulation foam. If you do want to insulate these fonts, you could either use expandafoam if you're a more permanent operator, or a trimmed pool noodle.

These fonts are perfect for air cooling and use with a Font Fan.

Specifications - 1-3 taps:

• 320mm Tall (without taps)
• 78mm Diameter
• Base Collar Diameter 111mm
• Internal Foam Insulation

Specifications - 4 tap:

• 400mm Tall (without taps)
• 125mm Diameter

Please note: handle with care. Scratches will be more visible than the Brushed Stainless Steel model.

From: Kegland

The BlowTie Complete Kit (Diaphragm Spunding Valve), for pressure fermentation and pressure transfers.

Pressure Fermentations
With pressurised fermentation becoming ever more popular, it is important to have a method of regulating and controlling the residual pressure from the fermentation process. The BlowTie has been designed specifically for this reason.

Pressure Transfers
When transferring from keg to keg, keg to bottle, or fermenter to keg, it's often a good idea to have head pressure in the keg you are filling, especially if you are transferring a beverage that is already carbonated. For this reason, the BlowTie can consistently control this head pressure, giving you more consistent results and without losing carbonation in the process.

Traditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation. Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.

The BlowTie has been made differently, taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure. It can be easily disassembled for cleaning using a flat head screw driver.

This Kit Includes:
- 1 x Blow Tie Spunding Valve
- 1 x Duotight 8mm tee piece
- 1 x Duotight FFL to 8mm fitting
- 1 x 8mm Push in 0-40psi Gauge
- 1 x Ball Lock Disconnect (MFL) Grey/Gas
- 2 x NEW Black 8mm straight joiner pieces

Instructions:
Use the yellow adjustment knob to control the pressure coming out of the pressure vessel. Clockwise is higher pressure and anticlockwise is lower pressure. We recommend gassing a keg to a known pressure, e.g. 15psi, then attaching your Blow Tie Kit to the keg and adjust to 10psi.

Specs:
- Made from food grade acetal
- Stainless screws
- 8mm (5/16") push on both sides
- 0-40psi pressure rating

A bored bung that tapers from 26mm across the top to 19mm across the bottom. Fits the Mangrove Jacks 25L Stainless Steel Fermenter.

A silicon bung with a diameter of 34mm across the top, tapering to a diameter of 27mm at the bottom.

Fits the 5L Glass Jar Demijohn with Mecanicco Swing Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.

Does not fit the 5L Glass Jar Demijohn with Screw Cap/Lid.

A bored silicon bung for use with an airlock. It is 38mm at the top tapering down to 25mm at the bottom.

A 2L borosilicate Erlenmeyer conical flask that is ideal for yeast starters using a stir plate such as the Wort Whipper..

Safety warnings:

**Please still exercise care when handling these and any other Borosilicate glass.**

There is a common misconception that Borosilicate glass is virtually bulletproof and can handle any dramatic temperature that is thrown at it. This is not strictly true.

Though it does have an incredible ability to withstand sudden and drastic temperature shocks compared to your average soda-lime glass, it should still be treated consciously with care.

Cool all glassware slowly to prevent breakage, unless you are using VYCOR glassware which can go from high heat to ice water with no damage.

Do not take your boiled flask directly from the stovetop straight into a bath of ice water. Though some people do this without failure, borosilicate glass is not designed for such an application. Please allow the flask to cool for a few minutes before running under water, before placing into an ice bath; the slower you introduce your flasks to temperature changes, the longer it will last. Going from fire to ice in a matter of seconds will introduce incredible amounts of stress to the glass structure. While the glass may be able to withstand this some of the time, other times you may not be so lucky. If the temperature differential is big enough, it will shatter. All Borosilicate glass will break eventually after a number of heat/cool cycles, it is impossible to give an exact number to determine when, but this is a natural an inherent feature of the material.

Please do not boil your flasks dry or dry them out using a stove. The temperature for drying should not exceed 140°C, which a naked flame can easily exceed.

Do not heat glassware that is etched, cracked, chipped, nicked, or scratched. It is more prone to break.

Do not heat glassware directly on electrical heating elements. Excessive stress will be induced in the glass, and this can result in breakage.

Small Bubbles that are less than 5mm and not located directly on the bottom of the flask is an acceptable manufacturing blemish as per our instruction from multiple manufacturers of glass.

A 2L borosilicate Erlenmeyer conical flask that is ideal for yeast starters using a stir plate such as the Wort Whipper..

Safety warnings:

**Please still exercise care when handling these and any other Borosilicate glass.**

There is a common misconception that Borosilicate glass is virtually bulletproof and can handle any dramatic temperature that is thrown at it. This is not strictly true.

Though it does have an incredible ability to withstand sudden and drastic temperature shocks compared to your average soda-lime glass, it should still be treated consciously with care.

Cool all glassware slowly to prevent breakage, unless you are using VYCOR glassware which can go from high heat to ice water with no damage.

Do not take your boiled flask directly from the stovetop straight into a bath of ice water. Though some people do this without failure, borosilicate glass is not designed for such an application. Please allow the flask to cool for a few minutes before running under water, before placing into an ice bath; the slower you introduce your flasks to temperature changes, the longer it will last. Going from fire to ice in a matter of seconds will introduce incredible amounts of stress to the glass structure. While the glass may be able to withstand this some of the time, other times you may not be so lucky. If the temperature differential is big enough, it will shatter. All Borosilicate glass will break eventually after a number of heat/cool cycles, it is impossible to give an exact number to determine when, but this is a natural an inherent feature of the material.

Please do not boil your flasks dry or dry them out using a stove. The temperature for drying should not exceed 140°C, which a naked flame can easily exceed.

Do not heat glassware that is etched, cracked, chipped, nicked, or scratched. It is more prone to break.

Do not heat glassware directly on electrical heating elements. Excessive stress will be induced in the glass, and this can result in breakage.

Small Bubbles that are less than 5mm and not located directly on the bottom of the flask is an acceptable manufacturing blemish as per our instruction from multiple manufacturers of glass.

Fan Tip Bottle Brush with long handle making it ideal for cleaning plastic and glass beer bottles.

From: Kegland