A 1/2 inch (12.7mm) Hex Nipple.

• BSP Threaded Ends
• Working Pressure: 150lbs (psi) / 10bar
• Working Temperature: 250°C at 10bar
• 316 Stainless Steel

A - 35mm

A: 27.5mm
B: 22mm

• BSP Threaded Ends
• Stainless Steel 316
• Working Pressure: 150lbs (psi) / 10bar
• Working Temperature: 250°C at 10bar

A 1/2 inch (12.7mm) to 3/8 inch (9.53mm) reducing bush. 

• BSP Threaded Ends
• Working Pressure: 150lbs (psi) / 10bar
• Working Temperature: 250°C at 10bar
• 316 Stainless Steel

This fitting is a part of the Grainfather Camlock Conversion Kit.

A 1/2 inch (12.7mm) male to female elbow (90º).

• BSP Threaded Ends
• Working Pressure: 150lbs (psi) / 10bar
• Working Temperature: 250°C at 10bar
• Also Known As Street Elbow
• 316 Stainless Steel

A - 48.5mm

B - 31.8mm

A 3/8 inch (9.53mm) male to female elbow (90º).

• BSP Threaded Ends
• Working Pressure: 150lbs (psi) / 10bar
• Working Temperature: 250°C at 10bar
• Also Known As Street Elbow
• 316 Stainless Steel

A - 42.9mm

B - 27.5mm

A 1/2 inch (12.7mm) threaded socket.

• BSP Threaded Ends
• Working Pressure: 150lbs (psi) / 10bar
• Working Temperature: 250°C at 10bar
• 316 Stainless Steel
• Works well to weight down the Robobrew Gen 3.1 (Brewzilla 35L) False Bottom

A 1/2 inch (12.7mm) Tee.

• BSP Threaded Ends
• Working Pressure: 150lbs (psi) / 10bar
• Working Temperature: 250°C at 10bar
• 316 Stainless Steel

A - 25mm

Take the work out of cleaning corny kegs, carboys and brewing vessels with the Bucket Blaster keg and fermenter cleaner. The Bucket Blaster is a great way to get your kegs, fermenters, fermzilla, carboy's or other brewery gear clean while you attend to other tasks.

Simply set up the keg washer basin with your cleaner or sanitiser, set a keg or carboy on over the jet nozzle, power up pump and let the keg washer do the work.

This unit comes with a 15L bucket which doubles as a storage container when you are not using the system. Some other keg washers come with a very small reservoir making it a pain to move, liquid spills over the sides easily and generally they just do not work as well. This unit has a large 15L bucket making it much less likely for you to spill liquid on your floor.

This system includes a 2000 litre per hour pump, the 15L bucket, a powerful jet nozzle, 3/8 EVABarrier tubing, a Duotight tee piece, a grey and a black ball lock disconnect and the stainless stand.

You can find instructions on how to assemble, operate, and maintain the bucket blaster here.

From: Kegland

A bored silicone bung with a 37-45 mm taper. Fits 5L Demijohn with Screw Lid.

A solid silicone bung with a 37-45 mm taper. Fits 5L Demijohn with Screw Lid.

A bung with a diameter of 46mm across the top, tapering to a diameter of 38mm across the bottom.

Fits the 5L Glass Jar Demijohn with Screw Cap/Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.

A solid bung with a diameter of 46mm across the top, tapering to a diameter of 38mm across the bottom.

Fits the 5L Glass Jar Demijohn with Screw Cap/Lid perfectly.

Camlock - Female to 1/2" Female (D Type).

Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.

This fitting is a part of the Grainfather Camlock Conversion Kit.

Made from: Stainless Steel 316

Camlock - Male to 1/2" Barb (E Type).

Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.

Camlock - Male to 1/2" BSP Male (F Type).

Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.

Made from: Stainless Steel 3 04

Camlock - Male to 1/2" Female (A Type).

Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.

This fitting is a part of the Grainfather Camlock Conversion Kit.

Made from: Stainless Steel 316

A Black Nitrile (NBR) camlock gasket with a maximum working temperature between 100℃ - 120℃.

A: 26mm

B: 17mm

C: 4mm

Fill any beverage into any bottle, can, jar or glass automatically with this internet connected, RAPT enabled, Cannular Can and Bottle Filler. More sanitary and easier to use than other competitors.

This Cannular Can and Bottle filler is ideally used for bottle, cans or even glasses.  Using two adjustable stainless steel tubes it will use one to purge oxygen out of the vessel and then use the second one to fill the vessel to a precise level based on an internal pressure sensor. 

Features

OLED Digital Display

The OLED display makes calibration super easy.  It also enables you to keep track of filling speed, number of cycles/fills, purge time, fill height and also enables you to make on-the-fly adjustments to your filling requirements so you can conveniently tweak the settings while filling.

Integrated Ball Lock Connectors

The integrated ball lock connectors allow you to quickly attach your beer and gas ball lock disconnects.  We recommend the use of the Duotight Ball Lock Disconnects in gas and liquid to connected to these input and outputs.

Integrated Pinch Valve

The integrated pinch valve is one of the things that makes this unit far superior to other filling machines.  The pinch valve enables you to easily remove the beer line for cleaning so the stainless tube, silicone hose and yellow carbonation cap/ball lock disconnect removes completely and can be put into the dishwasher or cleaned in the sink.  The pinch valve is mechanically simple and therefore reliable.  It is not subject to small particles like hops getting stuck in the device and eliminates the need for pre-filtration.  It pinches down on the silicone tube to shut off the flow.  This design also enables laminar flow that reduces fobbing.  The pinch valve improves reliability, makes it easier to operate and a piece of cake to clean.

Integrated Regulator

Other filling machines require an external regulator that may need to drop the pressure lower than your normal keg dispense pressure.  This filler has an integrated regulator which saves time and setup cost. The integrated regulator means you will not damage your machine by accidentally connecting it to a high pressure gas source.  You can hook up your gas line without the need for another external regulator or to fool around with your gas supply at all.  Just set the integrated regulator once during setup and forget about it.

Multi-Purpose

The long stainless tubes and adjustable height make this device useful for pretty much any bottles up to 30cm heigh or cans up to 27cm heigh.  It can also be used for still or carbonated beverages.  So this device is useful for wine bottles, beer cans, champagne, crown seal bottles and pretty much any other bottle/can/vessel that has a neck opening greater than 15mm.  It can also be used for filling glasses, jars or other vessels.

Fill Profiles

Some other machines require a full calibration to change from one vessel type to another.  This machine allows you to pre-save fill profiles depending on what you are doing.  Save a filling profile for your 300ml Cans and then save a different filling profile for your 750ml wine bottles.  Use our pre-saved presets or alternatively make your own fill profiles with different purge time and fill height.  These are also synced with the RAPT.io portal so you can save profiles and share them with friends or deploy to several other devices.

RAPT.io Connected (via Wifi)

As well as all the features above this filler connects to your Wifi and keeps track of your Cans Per Minute (CPM), fill speed and even temperature (if you purchase the external probe separately).  It will log all usage information so you can keep track of how your machine is running or even keep track of you staff to make sure they are cycling the machine at an acceptable rate.  The connectivity to the RAPT.io portal will enable you to more easily change settings, update profiles and keep track of your fill days so you can historically keep track of how your fill day went and which day you processed each batch. 

Low DO Pickup

The quality and longevity of your beverage is often defined by how well you keep oxygen off your product.  This filler purges the oxygen out of the can and will enable you to get substantially lower dissolved oxygen.

Wall Mounted Design

This type of can and bottle filler has primarily been designed for wall mounting configuration.  This allows you to bring a can or bottle up to the filler from the underside of the unit.  To wall mount this unit you can download and print this template.

From: Kegland

The Cannular can seamer is a manual can seamer that is easy to use, reliable and beautifully simple and with this Semi-Auto Model it just got even easier. Now you don't even have to pull a lever to seam the can. The seaming process takes only 3 Seconds!

The 24v power supply with a standard Anderson Plug is now optional. A 24v power supply is necessary to run the machine. The power supply for the manual Cannular machine is not suitable for this Semi-Auto unit.

Whether you're a cool bar wanting to fill your own crowlers or you are a home brewer wanting to keep your home brew fresh and protected from damaging light, the Cannular is the answer. The Cannular can seamer is one of the most compact and easy to use benchtop can seamers around. With a single operator you can seam/seal the cans in 3 seconds meaning this compact machine is suitable for small breweries or brewpubs doing small production runs.

Semi-Auto Design
This new Semi-Auto model of can seamer is able to guarantee you get consistent seaming process every time. Like the manual can seamer, this machine has no lever meaning it's even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever. Once the machine is tuned, only a small amount of oil on the bearings is required and no other maintenance for 50,000 cans. Please note that the beer will need to be carbonated prior to using the canning machine.

Safe To Use with Low Voltage Power Supply
If you have ever used a can seamer you would know that you can sometimes spill liquids while processing cans. As a result the Cannular machine is made with 24v DC so even when you make a mess you don't have a risk of electrocuting yourself. This also makes the machine easier to clean and wash down.

Environmentally Friendly
When compared with disposable glass bottles cans are much more environmentally friendly as they are: - Significantly lighter making them less energy consuming to transport - More recyclable, more cost effective to recycle, and a higher percentage of cans get recycled in when compared with glass.

Great For Outdoor Events
Cans are a fantastic choice for outdoor events, parties, pool events, or at the beach. Broken glass can be dangerous and difficult to clean up completely. Cans on the other hand are the safest choice in this respect.

Preserve the Product Quality and Freshness
Gas Barrier - Although a glass bottle is completely air tight, the crown seals allows a small migration of CO2 out of the beverage and allows small amounts of oxygen to get ingress as the rubber seal is permeable. So as a packaging solution glass bottles are imperfect and the product quality will degrade more rapidly due to this gas migration. Aluminium cans have a hermatic metal on metal seal that is impervious to gas transmission. Light Block - Many beverages, especially beer, can get damaged quickly due to light. If you expose many beers to sunlight for even 5 minutes the beer can become light damaged ("skunked"). Even soft light such as indoor lights will damage beer over time and noticeable skunking can occur with both incandescent and fluorescent light globes within hours. So unless you keep your glass bottles in the dark all the time you will compromise the beer quality. Aluminium cans solve this problem by blocking 100% of damaging light.

From: Kegland
Model: KL15769
Voltage: 24V
Power Plug: Anderson Type 40A

This plastic carbonation cap has been designed to suit soda bottles, coke bottles, FermZilla lids and collection containers. These are great for cleaning your keg lines, or carbonating beer quickly in a bottle, or if you simply want to take beer to a mates.

Liquid and Gas ball lock compatible.

This carbonation cap is also suited to any of the FermZilla products such as the FermZilla Pressure kit.

Made from high quality engineering plastic, it will last a very long time. It is chemically resistant and also designed to resist impact and physical damage.

The thread specification on this product is the PCO 1881 (AKA Coke bottle thread).

Yellow Plastic Carbonation and Line Cleaning Cap or FermZilla Pressure Cap.

These carbonation caps are now available in yellow to help differentiate between gas and liquid posts. Liquid = Gold is all you need to remember. Add your silicone dip tube to this cap and never risk accidentally attaching your gas line. Note: It is a multi post, so it will take both gas or liquid if you want to change it up.

Need to clean your beer line? Carbonate your beer quickly? Or simply want to take a traveller over to a mates? Then do yourself a favour and grab one of these essential tools for your brewing needs.

Liquid and Gas ball lock compatible.

This carbonation cap is also suited to any of the FermZilla products such as the FermZilla Pressure kit.

This product is made from high quality engineering plastic and will last a very long time.  It's chemically resistant and also designed ot resist impact and physical damage.

The thread specification on this product is the PCO 1881 (AKA Coke bottle thread).

From: Kegland

This model of carbonation cap does everything that regular carbonation caps do but with several added features.

The post on this unique carbonation cap has been machined to fit both the black/liquid and grey/gas ball lock disconnects. This carbonation cap also includes a barb-tail on the underside so you can attach beer line to act as a dip tube.

This allows the carbonation cap to be used in several different ways including:
1. Carbonating
2. Cleaning your beer lines
3. Using it to counter pressure bottle fill PET bottles

From: Kegland

Need to clean your beer line, carbonate your unfizzy beer quickly, or simply want to take a traveller over to a mates? Then do yourself a favour and grab one of these essential tools for your brewing needs.

Liquid and Gas ball lock compatible. 

You may need this fitting to connect to your 8mm OD tubing - Duotight - 6.5mm x 8mm Reducer.

Looking for the barbed version? You'll find it here.

CLEANING BEER LINES IN KEGERATOR
1. Acquire empty plastic PET bottle (e.g. 1.25L Coke Bottle)
2. Add cleaning solution for a 1L mixture
3. Add warm water to 1L
4. Attach Cleaning Cap to bottle
5. Attach Liquid ball lock disconnect connected to your tap to cap.
6. Turn on Tap with a jug or bucket underneath it to catch the beer/cleaning solution
7. Turn bottle upside down and squeeze (you can pressurise the bottle if you want so you don't have to squeeze, but this is just as fast and easy)
8. Wait until liquid out of tap runs clear, we recommend to wait 5mins with solution in the lines
9. Repeat 7-8 on other taps
10. Empty Bottle and fill with same temperature water, flush lines until you're satisfied there is no more cleaning solution
11. Hook up your beer line and pour away

TRAVELLERS
1. Fill beer from your tap, or if you have a Growler Filler tap or beer gun with a CO2 purge option, use that to purge 3 seconds worth of gas into the bottle (e.g. 1.25L Coke Bottle) to 3cm from the top. Beer will last considerable longer with a purge.
2. With one hand ready to screw the cap on, with your other hand squeeze the bottle until liquid is right on the brim. Then screw the cap on to make a seal.
3. Attach gas ball lock and add CO2 to the bottle to punch out the 3cm at the top of the bottle with CO2.
4. If you only finished half the bottle, squeeze out as much air as possible and fill with CO2.

QUICK CARBONATE
This can also be a great way to force carbonate your beer if its just been transferred to your keg and you don't want to wait! Remember your beer will absorb more CO2 the colder it is.

From: Kegland

A 71cm carboy and fermenter stirrer/paddle.

A crimping tool for use with step-less clamps. Made from hardened steel with an anti-slip rubberised grip.

74g CO2 Cannister | The Big Bulb | (5/8-18UNF Thread).

Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense. Perfect for parties where you're cranking out more than your average bear!

This CO2 Cartridge has a much larger thread than the standard 16g bulbs. It will require a different bushing if you are to use it with the 360 Core Mini Regulator. It does not suit other regulators in the KegLand range.

From: Kegland

Replacement threaded CO2 cartridge for kegging charger kits and other similar equipment. These premium cartridges are filled with food grade CO2.

Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per litre to dispense.

Size: 16g

A high quality Luxfer C02 Cylinder to use with your Kegerator. You no longer need to search for one of these to complete your package.

Has a 2 kg (3.4 L) capacity and is full.

Not available for shipping. Store Pick Up Only

Your all-in-one solution for kegging. This lightweight, durable aluminium cylinder is pre-filled with 3.5kg of food-grade CO2, ready to carbonate and serve your homebrew with reliability and ease.

Not available for shipping. Store Pick Up Only

Reconditioned steel 7 lb (3.2kg) CO2 cylinder with a high quality valve. A compact, durable tank.

Although this is a “used” CO2 cylinder, in reality, it’s good as new. That’s because this tank has been reconditioned to the highest standard. It has been fully tested and certified in addition to adding a brand new black galv undercoat and enamel top coat paint finish.

Construction and Features

• Durable steel body
• Quality & durable painted exterior in grey
• High quality valve with pressure relief device (PRD)
  
• Square base for added stability
• Tank comes full

Not available for shipping. Store Pick Up Only

A 12.7mm compression fitting with 1/2" BSP thread.

These compression fittings are commonly used with immersion chillers to quickly disconnect the liquid hosing for storage and ease of cleaning.

This fitting is a part of the Grainfather Camlock Conversion Kit.

From: Kegland

A copper immersion chiller is a great piece of equipment for all-grain and extract brewers to cool the wort at the end of the boil. It is immersed into the boiling wort at least 10 minutes before the end of the boil (this will help to sanitise the chiller, although it should be clean before being used) and attached to a cold water source.

When ready to cool the wort, turn on the cold water and it will flow through the immersion chiller and cool the wort.

To increase the rate at which the wort cools you can stir the wort to create a whirlpool. This will cause more of the wort to come into contact with the chiller and cool the wort faster. Make sure to sanitise whatever you use to stir the wort.

You could also use a pump (such as the MKII 25w High Temp Magnetic Pump) to create a whirlpool immersion chiller; made popular by award winning American home brewer Jamil Zainasheff. Here is a link to Jamil's site, Mr Malty, with more details.

An immersion chiller can also be used to pre-chill the cooling water. Just submerge the immersion chiller in an ice bath to to pre-chill the water that ultimately flows into another immersion chiller in the wort. This can be particularly helpful during summer when the groundwater temperature increases.