Sort by:
CM Becker are high quality disconnects made in Germany and assembled in the USA. They are:
- NSF approved,
- use FDA approved materials,
- and have SK approved materials(European).
This is a liquid disconnect for a Cornelius or Firestone ball lock keg with a 1/4 inch MFL connection. Can be used in conjunction with a Barbed Swivel Nut - 1/4 inch or Duotight 8mm - MFL Connector.
The ATF Juicy As lives up to its name. Hopped with over 7g/L in the whirlpool and over 12g/L in the the dry hop it is bursting tropical fruit and citrus aroma’s with a slightly zingy full juiciness and a nice balancing bitterness on a soft malt base.
Yeast is not included in the kit. We recommend using Froth Vape (Assumed Origin: Boddington’s) to produce a juicy hazy with a silky mouthfeel and great hop aroma and flavour.
Alternatively we recommend using Verdant IPA. Lallemand’s Verdant IPA yeast. LalBrew Verdant IPA yeast will produce fruity esters and is well suited to NEIPA’s. Verdant IPA yeast expresses high amounts of β-lyase enzyme promoting biotransformation accentuating hop flavour and aroma. and also produces high amounts of glycerol producing a beer with a silky mouthfeel.
You could also try Froth Spectra (Assumed Origin: Unknown (London)).Spectra can produce a spectrum of radiant flavour & aroma while exhibiting an elegant ester profile and velvety mouthfeel.
Alternatively you could use Lallemand's New England yeast. Lallemand New England produces beers with a unique fruit forward ester profile, which is sought after in NEIPA's. Through expression of a β-glucosidase enzyme, LalBrew® New England can promote hop biotransformation and accentuate hop flavour and aroma.
Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.
The ATF Juicy As lives up to its name. Hopped with over 7g/L in the whirlpool and over 12g/L in the the dry hop it is bursting tropical fruit and citrus aroma’s with a slightly zingy full juiciness and a nice balancing bitterness on a soft malt base.
Yeast is not included in the kit. We recommend using Froth Vape (Assumed Origin: Boddington’s) to produce a juicy hazy with a silky mouthfeel and great hop aroma and flavour.
Alternatively we recommend using Verdant IPA. Lallemand’s Verdant IPA yeast. LalBrew Verdant IPA yeast will produce fruity esters and is well suited to NEIPA’s. Verdant IPA yeast expresses high amounts of β-lyase enzyme promoting biotransformation accentuating hop flavour and aroma. and also produces high amounts of glycerol producing a beer with a silky mouthfeel.
You could also try Froth Spectra (Assumed Origin: Unknown (London)).Spectra can produce a spectrum of radiant flavour & aroma while exhibiting an elegant ester profile and velvety mouthfeel.
Alternatively you could use Lallemand's New England yeast. Lallemand New England produces beers with a unique fruit forward ester profile, which is sought after in NEIPA's. Through expression of a β-glucosidase enzyme, LalBrew® New England can promote hop biotransformation and accentuate hop flavour and aroma.
Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.
Using only the barrel stave component from quality distilleries' genuine bourbon barrels which consist of deeply charred 100% American oak, these oak chips impart a complex oak flavour profile to produce the ultimate bourbon experience.
Temp Twister Pump Kit with Return Line and Clamp.
If a glycol chiller is a bit out of reach at the moment, but you want to use the Temp Twister in your Kegmenter or FermZilla, this little product can help you on your way to cool your fermenter. Simply submerge the pump in a large bucket with water and ice.
The more insulation you give your fermenter and keep it at a relatively stable temperature the better. We suggest using this in conjunction with a temperature controller.
Parts List:
1 x 1.2m Length of Insulated 6mm x 9mm EVABarrier Hose
1 x 1.2m Length of 6mm x 9.5mm hose (return line back to the bucket) (colour may vary)
2 x 9.5mm duotight Elbows (For temp twister)
1 x Temp Twister 12v Pump and power supply
From: Kegland
This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Temp Controller.
This jacket also completely blocks any light/UV to prevent light struck or skunked beer.
From: Kegland
Duotight 8mm x Ball Lock Disconnect (Grey + Red/Gas)
This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!
Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.
The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean.
The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.
This particular ball lock disconnect has been designed to suit 8mm outside diameter beer/gas line. Due to the integrated duotight fitting the line will simply push directly into this fitting.
Some of the features include:
-
Duotight push in
These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
-
Compact
The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
-
Overmoulded Poppet
The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
-
Tool-less Disassembly
Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
-
Extreme Chemical Resistance
No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
-
Toughness
This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
-
High Flow
The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.
From: Kegland
Duotight 8mm x Ball Lock Disconnect (Black + Yellow/Liquid).
This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!
Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.
The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.
The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.
This particular ball lock disconnect has been designed to suit 8mm outside diameter beer/gas line. Due to the integrated duotight fitting the line will simply push directly into this fitting.
Some of the features include:
-
Duotight push in
These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
-
Compact
The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
-
Overmolded Poppet
The overmolded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
-
Tool-less Disassembly
Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
-
Extreme Chemical Resistance
No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmolded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
-
Toughness
This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
-
High Flow
The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.
From: Kegland
D-Type Keg Coupler - Full Stainless - with Duotight 5/8" to 8mm push fit fittings.
Includes:
1 x - D-Type Coupler with 5/8" Male Beer and Gas threads
2 x - duotight 5/8" duotight to 8mm push in
1 x - Non-Return Ball or Torpedo check piece (Non-Return Liquid)
1 x - Gas Duck Bill valve (Non-Return Gas)
How to install Gas Duck Bill Valve
Remove black EPDM washer inside 1 of the duotight push in fittings that you will use for gas. The duck bill valve is a washer as well as a non-return check piece. It is optional, you do not have to use the non-return check pieces for gas or liquid.
From: Kegland
This digital turbo boiler is a quality made 304 grade stainless steel turbo boiler.
The 65 Litre size is the total rated size brimful, so typically if you are using this as a beer boiler you would probably only fill it up to 50-60L so you had 5-10 litres of head space to boil comfortably.
The boiler has a quality made stainless tap with stainless barb and 1/2inch thread so you can attach the wide range of other half inch fittings such as camlocks and many other fittings that we can supply.
The unit comes with a concealed element for easy cleaning.
The digital display can be set from 0℃ and up to 140℃ with 1℃ increments and 1℃ resolution on the display.
The side of the boiler is pre-marked with graduations in litres and gallons that are accurate to +/- 1 litre.
- Litre and Gallon Graduations
- Stainless steel tap with barb and 1/2 thread
- Triple element control (so you can adjust the power from 500watts, 1000watts, 1500watts, 2000watts, 2500watts, 3000watts and 3500watts! )
- Easy to use
- Great for use as a hot liquor tank, boiler, or hot water urn
- Concealed element for easy cleaning
- Can also be used for sous vide cooking
Dimensions: 42cm diameter x 74cm high
You can also purchase the neoprene jacket/parka that fits this unit here. This will reduce your heat loss by about 200-300 watts.
Note: Out of the box this unit needs a 15amp power socket. With that said you can convert this to a 10amp compatible device in two different ways. You can either:
1. Purchase a device like an Ampfibian Mini 15amp to 10amp adaptor. If you do this you will be able to run the Digiboil, however if you turn on all three elements you will trip the circuit breaker. For this reason you will only be able to use a maximum of 2 of the elements. (not all three)
2. Alternatively you can remove the cord and replace the cord on this device with a 10amp cord, but if you do this you will need to disconnect the larger element resulting in 1300watts less power.
Carbonate and serve from your Mangrove Jack's Mini Keg with the Ball Lock Cap. Suitable for the 10L Mini Keg.
The ATF Extract Recipe - Mean As Juicy IPA has an amazing and complex flavour profile of tropical passionfruit, citrus, gooseberry, melon, and floral rose petal with a full soft malt background.
This kit includes hops that require steeping, as well as multiple dry hop additions. A total of 240g of hops.
Yeast is not included in the kit. We recommend using one packet of Lallemand Verdant IPA yeast. Alternatively you could use Lallemand New England Yeast, Mangrove Jack's Hophead Ale (which is a blend of yeast and β-glucosidase enzyme), Mangrove Jack's Liberty Bell yeast, or Fermentis SafAle S-04.
The Details
| Approx. OG | 1.060 |
| Est. FG | 1.014 |
| Est. ABV | 6.1% |
| Est. IBU | 20 |
| Colour | Burnished Gold/Orange |
| Volume | 23L |
| Recommended Yeast - Lallemand Verdant IPA | 1 pkt |
| Recommended Yeast - Lallemand New England | 1 pkt |
| Recommended Yeast - Mangrove Jack's Hophead Ale | 1 pkt |
| Recommended Yeast - Liberty Bell | 2 pkt |
| Recommended Yeast - S-04 | 1 pkt |
* Be prepared for a large krausen.
Kit Includes
- Muntons Maris Otter Liquid Malt Extract
- Muntons Wheat Liquid Malt Extract
- Muntons Oat Liquid Malt Extract
- Simcoe, Mosaic, & Citra hop pellets - 240g (in three vacuum sealed foil bags; one for steeping & two for dry hopping)
Additional Equipment Needed
-
Stainless steel pot large enough to comfortably hold 10 litres.
- Stainless steel spoon to stir wort.
- Thermometer
Stainless Steel beer disconnect with MFL fitting for ball lock corny kegs.
Made from 304 grade stainless steel, these keg connectors are extremely reliable and robust.
From: Kegland
Stainless Steel gas disconnect with MFL fitting for ball lock corny kegs.
Made from 304 grade stainless steel, these keg connectors are extremely reliable and robust.
From: Kegland
Seal Kit for both the Ball Lock and Pin Lock type Cornelius kegs.
Includes:
- 1 x Low2 Hatch/Keg Lid O-Ring (Yellow)
- 2 x Keg post o-rings
- 2 x Dip tube o-rings
What is Low2?
Low2 O-Rings are the new golden yellow standard of homebrew keg parts from Kegland. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.
From: Kegland
The Air Still Carbon Filter & Collection System is a simple container filter that uses a carbon cartridge to remove impurities from distillate. It is designed to filter smaller batches of spirit as produced with an Air Still or Air Still Pro.
Air Still Carbon Filter & Collection System includes:
- Carbon Cartridge
- Filter Holder
- Distillate Catcher
- Filter Container
- Filter Lid
- Clear Spindle
- Filter Bottom Cap
- Washer
The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation
It provides an accurate reading in both Celsius and Fahrenheit.
The Grainfather Thermowell consists of a tube closed at one end which can be fitted to a fermenter and allows for the Grainfather Fermentation Thermometer, or the GCA temperature probe to be inserted.
The Thermowell is fixed to the fermenter so that the closed tube is surrounded by the fermenter contents. The thermometer or temperature probe can then be inserted to can read the temperature accurately, without touching the liquid.
A 14mm hole in the fermenter is required for installation. The Thermowell is also a spare part for the SF70.
Includes:
- Thermowell
- Nut
- O-ring
NukaTap Flow Control Auto Close Spring.
The NukaTap Flow Control is the world's only forward sealing flow control tap that can use a auto close spring. By inserting the spring between the flow control device and NukaTap shuttle the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around!
This very inexpensive spring can save you from emptying an entire keg and then loosing a whole bottle of gas.
Note: The spring is not compatible with the NukaTap Standard Models, the auto close spring for those can be purchased here.
From: Kegland
This Hop Tube is made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your RoboBrew / BrewZilla without blocking the pump. It can also be used in your Brewhouse Kettle/Boiler, 19L corny keg, and the FermZilla.
It cannot fit in a standard 50L Keg as the opening is not wide enough. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel.
Diameter: approx. 66mm Heigh: approx. 300 mm.
From: Kegland
Bronco / Picnic Party Taps are an inexpensive way to pour beer and great for portable light weight systems that you can take away with you.
Now even better with the addition of duotights. No more hose clamps or stretching hose over barbs! It also makes it easy to disconnect and balance hosing if required.
Looking for the barbed picnic tap? You'll find it here.
From: Kegland
The ATF Tangyshake NEIPA is the best grown-up milkshake you’ve ever had. A pleasant tangy sourness balanced by a creamy milkshake like sweetness and texture and bursting with citrus and tropical fruits (think tangerine, pink grapefruit, melon, papaya) with hints of creamy coconut. The addition of vanilla rounds out the milkshake experience.
In addition to what is included in the kit you will need one vanilla pod and sufficient vodka in which to soak the vanilla pod. You could use 60ml of pure vanilla extract instead, although the flavour may not be as fresh and bright as the vanilla pod soaked in vodka.
The ATF Tangyshake NEIPA's acidity is provided by WildBrew Philly Sour yeast, a unique yeast that primarily produces lactic acid during the initial phase of fermentation before switching over to ethanol production.
Philly Sour takes longer than most yeasts to begin and complete fermentation so it is important to pitch the right amount of yeast.
Yeast is not included in the kit. We recommend using Lallemand Wildbrew™ Philly Sour Yeast.
Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.
The ATF Tangyshake NEIPA is the best grown-up milkshake you’ve ever had. A pleasant tangy sourness balanced by a creamy milkshake like sweetness and texture and bursting with citrus and tropical fruits (think tangerine, pink grapefruit, melon, papaya) with hints of creamy coconut. The addition of vanilla rounds out the milkshake experience.
In addition to what is included in the kit you will need one vanilla pod and sufficient vodka in which to soak the vanilla pod. You could use 60ml of pure vanilla extract instead, although the flavour may not be as fresh and bright as the vanilla pod soaked in vodka.
The ATF Tangyshake NEIPA's acidity is provided by WildBrew Philly Sour yeast, a unique yeast that primarily produces lactic acid during the initial phase of fermentation before switching over to ethanol production.
Philly Sour takes longer than most yeasts to begin and complete fermentation so it is important to pitch the right amount of yeast.
Yeast is not included in the kit. We recommend using Lallemand Wildbrew™ Philly Sour Yeast.
Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.
Winexpert Classic - Approachable & Easy Drinking
WineXpert is the world's largest producer of home winemaking kits. The grapes, which are harvested throughout the world, are de-stemmed, juiced and passed through a low-temperature vacuum designed to gently extract the water without destroying the delicate flavour of the grapes. The concentrate is aseptically transferred into bladders, before being packaged into boxes with yeast and additives, and a full set of clear, easy-to-follow instructions.
Elevate your wine by using a varietal specific yeast. We recommend using Mangrove Jack's VR21 or Mangrove Jack's BV7.
The Classic wine kits contain 8 litres of concentrate, which will make 23 litres of wine.
| Sweetness: |
|
| Body: |
|
| Oak: |
|
Ready in 4 weeks
Equipment and Supplies Required
- 30 litre food grade fermenter
- 23 litre secondary fermenter
- Syphon and tubing
- Hydrometer and trial jar
- Thermometer
- Mixing spoon
- Cleaner and sanitiser
- 30 wine bottles and corks
Inspired by the commercial popularity of the style and to expand on Mangrove Jack's 'juicy' offerings, Pink Grapefruit IPA and Juicy IPA, this refreshing pale ale is bursting with juicy mango notes, combined with citrus and tropical hop aroma.
Refreshing and moderately dry on the palate, with a smooth and delicately bitter finish. Pours golden with a fluffy white head.
Yeast: M44 US West Coast
Hops: Citra & Azacca 50g
Bitterness: 3/5
Colour: Golden
ABV Approx: 4.7%
Makes: 23L
Brewing Sugar Required: Pure Liquid Malt Extract: 1.2 kg, or 1kg Beer Enhancer, or Dextrose: 1kg.
The Craft Series Irish Stout makes a distinctively dark stout with a creamy tan head, beautiful bitter coffee and chocolate roasted malt notes, balanced by a subtle fruitiness with a lingering dry finish.
ABV Approx: 5%
Bitterness: 3/5
IBU: 30-38
Colour: Black
Makes: 23 L
Yeast: M42 New World Strong Ale 10g
Dry hops: Goldings 20g
Brewing Sugar Required: 1.2 kg (2.6 lb) Pure Liquid Malt Extract or 1 kg (2.2 lb) Dextrose/Brew Enhancer
Duotight - 8mm x 9.5mm Reducer.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.
From: Kegland
A complete set of premium quality winemaker's equipment. Everything you'll need to start making wine today.
Includes:
- 30 L Fermenter and Lid
- Airlock & Grommet
- 23 L PET Carboy and Bung
- Easy Siphon
- Hydrometer
- 39 cm Spoon
- Bottle Brush
- No-Rinse Steriliser
- Cold Water Detergent
The Still Spirits Air Still is an air-cooled pot still that allows you to distill small batches of flavourful spirits with up to 60% ABV. Ideal for beginners. If you want to to distill batches of spirit with up to 90% ABV check out the Air Still Pro.
Compact and easy to use wherever and whenever you want. It fits nicely on your kitchen countertop and stores easily in cabinetry or pantries. The Air Still is equipped with an efficient, built-in fan that blows air over the coils to cool and condense the vapour into liquid. No separate water source is required. A botanical basket, purchased separately, can be used for crafting gin.
Specifications:
- Capacity: 4 L (1 US Gal)
- Yield: 2 L (2.1 US qt) of 40% ABV alcohol per 8 L (2.1 US Gal) wash
- Pot Still that distils up to 60% ABV (120 US proof) before diluting to 40% ABV (80 US proof)
- Dimensions: 40.5cm (h) x 28cm (w) x 29cm(d)
- Weight: 4.34kg
- Power: 220v (110v US Only)
- Warranty: 3 years
Included in the box:
- Starter Guide
- Air Still Head Unit
- Air Still Boiler and power cable
Berliner Weisse is a refreshing low alcohol beer with a pleasant tartness that originated in Germany. A great summer beer that was once called the champagne of the north and is often served with a flavoured syrup such as Woodruff or raspberry.
The ATF Berliner Weisse's acidity/sourness is provided by WildBrew Philly Sour yeast, a unique yeast that primarily produces lactic acid during the initial phase of fermentation before switching over to ethanol production. This allows this beer to produced without the need for kettle souring.
Yeast is not included in the kit. We recommend using Lallemand Wildbrew™ Philly Sour Yeast.
Berliner Weisse is a refreshing low alcohol beer with a pleasant tartness that originated in Germany. A great summer beer that was once called the champagne of the north and is often served with a flavoured syrup such as Woodruff or raspberry.
The ATF Berliner Weisse's acidity/sourness is provided by WildBrew Philly Sour yeast, a unique yeast that primarily produces lactic acid during the initial phase of fermentation before switching over to ethanol production. This allows this beer to produced without the need for kettle souring.
Yeast is not included in the kit. We recommend using Lallemand Wildbrew™ Philly Sour Yeast.
Brought back from obscurity by Pierre Celis at the Hoegaarden brewery, Witbier is a great refreshing beer. With plenty of un-malted wheat along with a portion of oats, Witbier is typically cloudy with a soft grainy sweetness. Belgian Wit Yeast adds subtle banana fruitiness and clove notes, which are enhanced through the addition of coriander seeds and fresh orange yeast.
In addition to what is included in the kit you will need 12g of coriander seed and 45g of orange zest (or the zest of your favourite citrus fruit).
Yeast is not included in the kit. We recommend using Froth Unicorn (Assumed Origin: Hoegaarden), or you could use Lallemand Lalbrew Wit or Mangrove Jack's Belgian Wit Yeast.
Brought back from obscurity by Pierre Celis at the Hoegaarden brewery, Witbier is a great refreshing beer. With plenty of un-malted wheat along with a portion of oats, Witbier is typically cloudy with a soft grainy sweetness. Belgian Wit Yeast adds subtle banana fruitiness and clove notes, which are enhanced through the addition of coriander seeds and fresh orange yeast.
In addition to what is included in the kit you will need 12g of coriander seed and 45g of orange zest (or the zest of your favourite citrus fruit).
Yeast is not included in the kit. We recommend using Froth Unicorn (Assumed Origin: Hoegaarden), or you could use Lallemand Lalbrew Wit or Mangrove Jack's Belgian Wit Yeast.
The Gold Medal Collection are our finest quality concentrates, handcrafted using traditional recipes and only the finest ingredients.
A richly aged dark molasses rum infused with five tropical spices, delivering notes of caramelised sugar, vanilla, clove and cinnamon, with a long, rounded finish typical of traditional Caribbean dark rums.
Try this if you enjoy Captain Morgan™ Dark Spiced.
The Gold Medal Collection are our finest quality concentrates, handcrafted using traditional recipes and only the finest ingredients.
Made with our special bourbon extract, blended with New Zealand Kamahi honey. A truly natural blend.
Try this if you enjoy any commercial honey bourbons, or bourbons with a sweet flavour profile.
The Gold Medal Collection are our finest quality concentrates, handcrafted using traditional recipes and only the finest ingredients.
A smooth Irish whiskey style blended from traditionally triple-distilled extracts, with a restrained touch of peat for gentle smokiness. Lightly aged in American oak to deliver subtle sweetness, soft vanilla notes and a clean, balanced finish.
Try this if you enjoy Connemara™
