Search: 367 results found for "keg coupler d type"

NukaTap - Flow Control Gen3 Seal Kit

(0)

$7.95

BrewZilla Gen 4 - 65L - Silicone Tube Kit for 6w Pump

(0)

$29.95

NukaTap Mini - Wall Mount Shank Kit

(0)

$24.95

NukaTap Mini - Wall Mount Shank Kit (Duotight 8mm).

This shank kit is specifically designed to suit the Nukatap Mini taps and will allow you to connect the Nukatap Mini to a cooler box, kegerator, keg fridge, coolroom wall or any other flat surface.

New Innovative Shank Design
Unlike other shank kits this shank kit doesn't use a bulky 5/8" bar stock. The issue with 5/8 bar stock is it acts as a heat sink and due to the fact that most other shanks sit inside the insulated wall this results in a substantial amount of warm beer coming out of the tap before cold beer starts flowing. This means a "first pour foam" effect which wastes beer, can result in sour beer, and ultimately negatively effects the quality of the beverages being served. This new design has the beer line feed all the way directly up to the back of the tap greatly reducing the volume of non-refrigerated beer.

No Spinning Shanks
If you have ever installed a traditional 5/8" long shank you will know how frustrating it is when you use the tap and the tap starts rotating. This new design of shank alternative uses three screws that lock the tap into a fixed position and prevents the taps from rotating. If you loosen the 1/2" stainless tap collet you can still have the flexibility to rotate the tap to any orientation but once the collet is tight interlocking teeth on this shank kit and the Nukatap Mini will hold the tap permanently in the correct orientation.

Easy Installation
Unlike other long shank kits, this kit doesn't require large 22mm hole saw to be used to drill through the wall. As no shank is required, only a hole large enough to accommodate the beer line is required. As a result only an 8mm conventional drill bit is all that is necessary and this makes the installation easier. If, however, you are concerned about the small amount of beer sitting in the beer line in the wall not being refrigerated you can also shell out a larger diameter of foam on the inside of the wall to allow cold air to circulate around the beer line thus reducing the non-refrigerated beer in the line even more. If you wanted to do this a Step Drill Bit is the best tool for the job.

Any Wall Thickness
Other shank kits will require you to purchase a specific length shank for a specific wall thickness. This new shank alternative will fit any wall thickness. If you have wall thicknesses that are less than 80mm thick then you can use the included screws that have "snap off" points so you can simply cut the screws down to the desired length. If, however, the wall is thicker than 80mm you can simply purchase a conventional screw from the hardware store and screw the shank kit to your wall. If the substrate is firm enough you may not even need to go all the way through the wall, so a common 30mm long screw may be all that is required.

Specifications:

Beer Line Diameter: Suits any EVABarrier beer line in with 8mm ID Beer line such as the 4mm x 8mm EVABarrier beer line or the 5mm x 8mm EVABarrier beer Line.
Collet and Screw Cover: 304 Grade Stainless Steel
O-ring Material: Dual o-ring Silicone/EPDM combination
Plastic Mounting: POK
Temperature Range: -10C and up to 100C
Max Pressure: 150psi

NOTE: Nukatap Mini is SOLD SEPARATELY.

Copper Wort Chiller - Large

(0)

$199.95

Beer Tap Spout Plug

(0)

$1.50

Keg Post O-Ring

(0)

$0.50

Carbonation and Line Cleaning Cap - Stainless Steel - Duotight

(0)

$16.95

Need to clean your beer line, carbonate your unfizzy beer quickly, or simply want to take a traveller over to a mates? Then do yourself a favour and grab one of these essential tools for your brewing needs.

Liquid and Gas ball lock compatible.

You may need this fitting to connect to your 8mm OD tubing - Duotight - 6.5mm x 8mm Reduce r.

Looking for the barbed version? You'll find it here.

CLEANING BEER LINES IN KEGERATOR
1. Acquire empty plastic PET bottle (e.g. 1.25L Coke Bottle)
2. Add cleaning solution for a 1L mixture
3. Add warm water to 1L
4. Attach Cleaning Cap to bottle
5. Attach Liquid ball lock disconnect connected to your tap to cap.
6. Turn on Tap with a jug or bucket underneath it to catch the beer/cleaning solution
7. Turn bottle upside down and squeeze (you can pressurise the bottle if you want so you don't have to squeeze, but this is just as fast and easy)
8. Wait until liquid out of tap runs clear, we recommend to wait 5mins with solution in the lines
9. Repeat 7-8 on other taps
10. Empty Bottle and fill with same temperature water, flush lines until you're satisfied there is no more cleaning solution
11. Hook up your beer line and pour away

TRAVELLERS
1. Fill beer from your tap, or if you have a Growler Filler tap or beer gun with a CO2 purge option, use that to purge 3 seconds worth of gas into the bottle (e.g. 1.25L Coke Bottle) to 3cm from the top. Beer will last considerable longer with a purge.
2. With one hand ready to screw the cap on, with your other hand squeeze the bottle until liquid is right on the brim. Then screw the cap on to make a seal.
3. Attach gas ball lock and add CO2 to the bottle to punch out the 3cm at the top of the bottle with CO2.
4. If you only finished half the bottle, squeeze out as much air as possible and fill with CO2.

QUICK CARBONATE
This can also be a great way to force carbonate your beer if its just been transferred to your keg and you don't want to wait! Remember your beer will absorb more CO2 the colder it is.

From: Kegland

Digital Scales - 40kg

(0)

$79.95

Triclover 2″ Bulkhead Set - 304 Stainless Steel

(0)

$43.90

Keg Lid Foot

(0)

$1.90

Stainless Steel Stepless Clamps

(0)

$0.90

Copper Immersion Chiller

(0)

$99.95

Nukatap - Stainless Steel - Forward Sealing Tap

(0)

$44.90

Nukatap - the latest in beer dispensing tap technology.

What makes the Nukatap different among the other manufactured styles of taps on the market?

- First Pour Foam Reduction due to reduction in Thermal Mass

- Improved Laminar Flow

- Most Sanitary Forward Sealing Design Design

- Longer Life Seals

- More Versatile Tap Handle Angle

First Pour Foam Reduction

The reduction in thermal mass significantly reduces the first pour foam effect. The tap is often the warmest part of the draft system as it protrudes from the font/tower/fridge. As a result, it acts like a heat sink and only works well once enough cold beer flows through it to cool the tap body down. This reduction of thermal mass significantly improves the foam that is poured while the tap is cooling down.

Laminar Flow

The Nukashuttle design is the world’s first seamless shuttle. After many months of modelling and testing this new "Nuke" shaped shuttle design has the most fluid dynamic shuttle shape ever manufactured for a forward sealing tap. The streamline "nuke/missile" shape is how this new innovation earned its name "Nukatap". This leap forward in laminar flow means even highly carbonated beers pour like a dream with minimal turbulence and giving you the perfect pour every time.

Most Sanitary Design

The Nukashuttle is the world’s first seamless single-piece design. Traditional taps have a seal that is seated on a stainless-steel body creating small fissures that harbour solids, are potential sites for infection, and are not as ideal for clean in place (CIP). The Nukashuttle is an advanced TPV rubber matrix that been seamlessly formed over a durable PP skeleton. This single-piece design takes away the traditional fissures found in older manufacturing methods.

Long Life Seals

Unlike many other taps that use rubbers that can be degraded with caustic and acid compounds, the Nukatap has been made to suit a wide range of conditions. It's becoming more common to see sour beers/kombucha and other acetic and lactic acid beverages dispensed using draft systems. These acids, in particular, could cause an attack on the sealing compounds resulting in downtime, loss of product and reduced maintenance intervals. The Nukatap solves this problem and is the most chemically resistant tap we have ever manufactured. Unlike some older tap styles that have "metal on metal" rubbing components that can wear over time and have a "raspy feel" the Nukatap has been manufactured with a smooth gliding action that guarantees the longevity of the tap components. The TPV rubber matrix shuttle is also one of the most durable sealing mechanisms that can tolerate large amounts of leverage force from long tap handles that would otherwise traditionally degrade the seals in other tap designs.

Other forward sealing designs exist but nothing with the same level of reliability. It’s easy to find other “perl” forward sealing design taps however these taps use a floating o-ring design which by all means is equally as sanitary however the floating o-ring requires the o-ring to move within the tap body to seal correctly. This movement is typically a problem as the tap ages and/or is not serviced regularly. The Nukatap bypasses this seal as the entire Nukashuttle is a single sealing piece.

Tap Handle Angle - 2.5 degree Reverse Angle

The Nukataps have been manufactured with a 2.5 degree reverse angle. This allows for a wider range of taps handles to be used, in particular, long and/or heavy handles to work perfectly irrespective of the installation conditions.

Forward Sealing Design

Just like the Intertap and its predecessors, the Nukatap shuts off the flow at the front of the tap which in turn keeps wild yeast and bacteria out of the interior of the tap body.

What does Rear Sealing Design Mean?

Typically most beer taps use a rear sealing design and the beer in the tap drains from the body of the tap with the help from a vent hole drilled at the front of the tap. This drainage hole is a dark and wet cavity and is an ideal place for airborne bacteria and wild yeast to reproduce leaving a foul film that deteriorates the quality of your beer. Every time the faucet is opened contamination can occur.

Compatible with Intertap and Nukatap accessories:

- Auto-Close Spring

- Stout Spout

- Ball Lock Post Spout

- Growler Spout

From: Kegland