Search results
367 results
Sort by:
367 results
Search results
The Temp Twister allows you to heat and cool your FermZilla or other fermenter or bright tank, ideally by combining with a glycol chiller. This coil can be adapted to fit any fermenter or bright tank that has an opening of 110mm diameter or larger. Simply drill to two 22mm holes in the lid of your fermenter and use the included Duotight bulkhead fittings to attach the coil to the lid of your fermenter.
Specifications
- Coil Diameter x Height: 11cm x 68cm
- High Material: 304 Stainless Steel Coil
- Thickness: 9.5mm OD (3/8")
- Coil Length: 6 meters
- Heat Transfer: With this coil submersed in liquid it will be able to absorb more than 250watts
From: Kegland
Lead free brass adaptor, is attached to the boiler lid with the original locking nut of a different manufacturer to convert condenser with DN40 or 1 1/2″ BSPP thread to a triclover mount attachment. The adaptor requires a 1 1/2″ Seal (Still Spirits T500 Column O-Ring) to make a sound join.
This is a replacement seal (2 inch beaded tri clamp seal) for the Conical Fermenter cone plug.
RAPT Pill - Green Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile.
To be able to cool with the Grainfather Conical Fermenter, you need to have the Conical Fermenter Temperature Controller. Then once your target temperature is below the temperature of the wort in your fermenter the Cooling Pump Kit pumps ice cold water through the double walled insulated interior to cool down your wort.
Simply connect the couplers and insulated hoses to the Conical Fermenter, submerge the submersible pump into a cooler box with water (add ice for your required temperature) and pump the liquid through the insulated cooling sleeve of the Conical Fermenter body.
Whats Included
Conical Fermenter Cooling Pump (submersible)
T-section power connector
2 x brass couplers
Specifications
Rated 12 VDC – 4.8 Watts
Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process.
The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort.
A European-style plastic handle for beer taps. Fits most faucets.
Standard 2" tri-clamp compatible with Grainfather GF30 Conical Fermenter Dual Valve as well as G40/G70 distilling attachments.
This RAPT wifi connected temperature controller box will enable you to monitor, track and control heating and cooling devices remotely through the internet. Set complex temperature profiles so the temperature will automatically change over time.
It connects with the RAPT web portal meaning that you can monitor, log and control the devices plugged into this temperature controller box remotely.
The colour screen clearly displays temperature, graphs of future and past temperature settings, and makes it much easier to perform profile temperature steps.
This plug and play temperature controller box has two clearly marked blue and red power sockets for heating and cooling so you can control a fridge or heating device at the same time to completely monitor and control the temperature. Each power outlet is rated to 10amp (2400 Watt max).
PID Included
This temp controller box comes with PID heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation.
Temperature Range
The temperature range of this device will enable you to control devices from -20C and up to 120C.
Various Mounting Options
This innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brewery. Simply unscrew the mounting plate and switch the mounting to your preferred orientation.
RAPT Wifi Compatible
This product will connect with the https://app.rapt.io/ portal. This portal will enable you to monitor, control and log past temperature and also show a future projection of temperature profiles that you might have running.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/
The Apple App Store RAPT App can be downloaded via the link below.
https://apps.apple.com/th/app/
"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device. It also gives you the added functionality of push notifications to your mobile device."
From: Kegland
Replacement threaded CO2 cartridge for kegging charger kits and other similar equipment. These premium cartridges are filled with food grade CO2.
Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per litre to dispense.
Size: 16g
A rugged and durable push fit, inline filter strainer.
Available in both 8mm and 10mm push fit size.
The detachable cap and body allow for easy servicing and cleaning.
Do not apply excessive vibration, torque, shock or other strong loads to the filter as the filter body may damage or collets may be dislocated.
Filter grade: 100 mesh
Colour: Black
Max. Pressure: 170psi
Temperature: Air -20C, Liquid 65C
Height: approx. 70mm
A 1.5" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
The Grainfather counterflow chiller is used after boiling the wort to cool it down fermentation temperature. The counterflow does this by acting as a heat exchange between the wort and water from your tap as you transfer the wort from your boil kettle to your fermenter. Because this is a one-step process of transferring and cooling, it is more efficient and more sanitary than immersion chillers, and the curved design allows for similar performance to plate chillers without the crevasses that can make cleaning painful.
Features
- One step transferring and cooling
- Fast cooling time to within 3C of source water temperature.
- More sanitary transferring
- Copper inner coil for high heat exchange
- Compatible with a range of brewing systems
Includes
- Counterflow chiller
- G30 connector
- 9mm right angle hose barb connector for G40, G70 and other brew systems
- Tap adapter set for connection to garden hoses and most faucets
Specifications
- Copper inner coil
- 9mm ID inlet and outlet hoses
- Colour coded hoses for inlet and outlet water
The Deluxe Twin Lever Corker is perfect for corking your own wines. This is the best corker available with a lever before having to move on to the Floor Stand Corker model.
Simply place the cork in the centre of the corker and pull the two handles down to insert the cork into the bottle. Corks are intended for use with proper cork bottles, you can usually fit a cork into a screw top bottle but note their neck is narrower so it is more difficult. Make sure you dont overfill the bottle with wine, allow (approx) 20mm gap between the top of the wine and the bottom of the cork. Experiment with different cork types until you find the best fit for your bottles.
NB: All corkers will usually leave a small indentation on the top of the cork. A shrinkwrap will cover this and protect the wine further if this bothers you. Corks still require soaking to soften but this corker does make the job easier if doing a lot of bottles compared to a Basic handcorker..
Suitable for a range of corks including:
- VHA (38x24mm)
- VH7 (38x21mm)
- VH8 (38x22)
- VHC (38x24mm)
- VHN (37x22mm)
This longer version of the standard Conical Fermenter Dual Valve inlet provides increased clearance above the sediment line for clear, sediment free sampling and racking of your beer.
This is best to be used when you have an increased trub level i.e. if you are fermenting fruit beers or brews with a large quantity of dry hops.
Specifications
304 stainless steel
160 mm (6.3")
A mix-stir agitator rod makes aerating in a carboy a breeze. Simply attach the agitator rod to your drill and you are ready to go. The blades fold up for easy insertion into any sized carboy (except 5L or under).
De-gas your wine in a few minutes, or aerate your wort for a healthy fermentation.
The mix-stir is very effective at de-gassing your wine although it should not be used for more than a few 10-15 second bursts. If you over-use the mix-stir you risk adding oxygen to your wine.
The Grainfather digital Temperature Controller replaces the temperature display. With this you can control the heating and the cooling (if you have the Grainfather Glycol Chiller) of your fermenter by dialing in a temperature or even setting a temperature schedule (can set up to 5 stages). This snaps on easily via magnets and pogo pins with no extra cords or clutter.
Specifications
Control the heating element and Glycol Chiller (available separately)
Choose between imperial and metric (C° & F°)
Total of 4 fermentation profiles with up to 5 steps each (2 are pre-set for a lager and an ale, 2 are custom)
Hysteresis is customisable and able to be set at 0.1 intervals between a range of 0.1°C – 1.9°C & 0.2°F - 2.9°F (the default setting is 0.5°C)
Replacement high-temperature food-grade silicone hose for use with the Grainfather GF30 Conical Fermenter Pressure Transfer.
This tube can connect to the sample valve of the dual valve tap or the pressure transfer dip tube for transferring liquid out of the fermenter.
Length: 2m