Sort by:
A 1 gallon (3.8 litres) wide-mouth glass jar with a plastic screw top lid. Ideal for steeping, macerating, or ageing spirit.
Could also be used as a small fermenter by making a small hole in the lid and adding a top hat grommet and airlock.
Dimensions
- Diameter: 155mm approx.
- Height: 260mm approx.
- Mouth Diameter: 100mm approx.
Handcraft Supplies 10L Fermenter with Lid & Grommet is perfect for brewing up to 9 litre batches of wine, beer, cider, or other fermentation.
Comes with a lid pre-fit with a grommet, ready for an airlock. Stackable and made from food-grade plastic with litre markings on the side so you can easily see how much to top up to. Comes with a sturdy plastic handle for easy transportation.
A solid plastic fermenting barrel with screw top lid, airlock hole, and one litre markers down the side.
Please note that you will also need to order an airlock, airlock grommet and tap if you want a complete fermenting barrel.
Dimensions: approx. 525mm high x 300mm diameter
Handcraft Supplies 5L Fermenter with Lid & Grommet is perfect for brewing up to 4.5 litre batches of wine, beer, cider, or other fermentation.
Comes with a lid pre-fit with a grommet, ready for an airlock. Stackable and made from food-grade plastic with litre markings on the side so you can easily see how much to top up to. Comes with a sturdy plastic handle for easy transportation.
A 60 litre plastic carboy/barrel fermenter suitable for fermenting beer, cider, wine, or spirits.
You may also require:
Handcraft Supplies Campden Tablets for use in winemaking to sanitise fruit must or to preserve wines/ciders. Simply crush and dose as per instructions on label.
Can also be used to remove chlorine and chloramine from brewing water.
Approximately 100 tablets in a tamper proof and resealable tub.
Contains sodium metabisulphite.
Caution: Gives off toxic gas. Avoid vapours and contact with sensitive skin.
Coriander seeds are commonly used in distilling gin as part of a botanical mix with juniper, citrus and sometimes liquorice. It can also be used as part of a beer recipe, namely Belgian wits, saisons, and goess in which the coriander seed imparts sharp citrus flavours.
Juniper berries give off fresh, woodsy notes with a subtle fruity citrus flavour and hint of spice. A principle ingredient in gin recipes, they can also be used in beer recipes to impart their flavours and aromas.
Mangrove Jack's ECD Cold Water Detergent effectively cleans and deodorises everything you use for brewing, winemaking and distilling. Cold Water ECD Cleaner Detergent is a powerful cleaner removing dirt, stains and undesirable micro-organisms, restoring your surface to its original condition.
Cleaning plays an essential role in good brewing, wine making, and distilling. You should always clean your equipment prior to sterialising.
The Handcraft Supplies Fermentation Equipment Kit contains the essential equipment you require for your fermentation needs. Whether you're making beer, cider, wine, or a wash for distilling, this kit enables you to get your fermentation underway and completed successfully. All you need are your ingredients and a suitable cleaner and sanitiser.
Designed for 23 litre batches. Simply assemble, sanitise and add your ingredients.
This kit is made up of:
30L Fermenter + Lid
Stick-on Thermometer Strip
Bubbler Airlock
Grommet
Tap
Plastic Spoon
Hydrometer
Mangrove Jack's No Rinse Sanitiser effectively sanitises brewing, wine making, and distilling equipment.
Unlike conventional alkaline powdered sanitisers, Mangrove Jack's No Rinse Sanitiser requires no rinsing. It makes the vital job of sanitising equipment easy and effective. It utilises active oxygen, which breaks down to leave only oxygen, water, and minerals found naturally in water.
Contains: Sodium Percarbonate 880g/kg
Handcraft Supplies fermenter set containing a 30L bucket with lid and accessories, ready to ferment. Includes litre markers down the side. Use for primary or secondary fermenter, or even as a bottling bucket.
This kit is made up of:
Stick-on Thermometer Strip
Bubbler Airlock
Top Hat Grommet
Sediment Reducer
Tap
30L Fermenter + Lid
Handcraft Supplies Super Smoother adds body and a hit of oak character to wine, cider, or mead, instantly enhancing the finished drink. Simply add both sachets before bottling and stir well to mix. The combination of glycerine and liquid oak extract is designed to smooth out flavour and reduce harshness and aging times. For use in batches up to 23 L. See pack for full instructions.
Harraways Flaked Barley is produced much like their rolled oats. Raw barley is steamed and then pressed through a pair of rollers. Flaked barley can also be added directly to the mash with base and speciality malts.
It imparts a rich, smooth, and grainy flavour and is commonly used in stouts, but can also perform well as an adjunct in German style pilsners, as it can produce lighter colour without lowering the gravity.
Flaked Wheat adds to increased body and foam retention.
Used in place of raw or torrified wheat for faster conversion and better yield.
May be used in small amounts to improve head retention and body.
Harraways Jumbo Oats are a versatile adjunct. These wholegrain oats have been rolled into flakes that can then be added directly to the mash with base and speciality malts. Rolled oats provide a creaminess and smooth silky mouthfeel. They are commonly used in hazy's, porters, and stouts, and are also effective for adding body to low alcohol beers.
A tomato based distillers yeast for cleaner spirit and higher yield compared to other turbo yeasts. Ferments 6Kg of sugar down to 0.985 in seven days.
Instructions
Add entire contents to 25 litres of warm water containing 6kg of sugar (SG01.090). Mix vigorously. Fit fermenter with an airlock on day 3. Keep at 25℃-30℃ until fermentation is complete (sg-0.985).
Campden Tablets for use in winemaking to sanitise fruit must or to preserve wines/ciders. Simply crush and dose as per instructions on label.
Can also be used to remove chlorine and chloramine from brewing water.
Approximately 50 tablets in a tamper proof and resealable tub.
Contains sodium metabisulphite.
Caution: Gives off toxic gas. Avoid vapours and contact with sensitive skin.
A brewing heater belt that fits around your fermenter to provide steady and constant warmth for your brew. The 30 watts will gently warm without creating a hot spot, and can be moved up or down the fermenter to increase or decrease the heat transfer to the brew.
To further control the temperature of your fermentation, combine with a RAPT Temperature Controller or similar to regulate the heater belt automatically.
Note: fermenter not included.
From: Kegland
These 304 Stainless 2200w weldless elements are designed to fit a 32mm hole inside the wall of your brewing vessel or boiler. It comes bundled with the power cord.
We do recommend using a RAPT Temperature Controller to run this element with the appropriate thermowell or temperature probe attachment.
These electric brewing elements are highly recommended for your HLT, or even for a HERMS or RIMS setup. Multiple elements may be required for larger volumes and depending on what temperature you are trying to achieve. If you are going to be using these elements directly in your mash tun, and will try to maintain temperature using the element, we would recommend getting a power control chip 3600w to modify the power output to the element. Too higher power directly in contact with your malted grain can cause scorching/off flavours as the temperature may not be evenly distributed and isolated purely around the element itself.
Element Length: approx. 300mm
Diameter: approx. 25mm
Thread: approx. 32mm
From: Kegland
3600 Watt Stainless Steel Heating Element with 2 inch tri-clamp (220-240v)
It can be fitted to a 2" tri-clamp ferrule. It does have a water-resistant screw element guard. This was produced to be used with the 118L Kegmenter that has 2" ferrules.
It is highly regarded as a popular and reliable element for distillers and homebrewers.
This element is to be installed by a professional electrician with a 15amp Cord.
From: Kegland
Fermentation Heating Wrap Belt - With Velcro Strap (30watts) 220-240VAC (50-60hz)
Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty.
Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile.
To further control the temperature of your fermentation, combine with a RAPT Temperature Controller or similar to regulate the Heating Wrap Belt automatically.
Features:
- Easy to use
- Handy velcro strap
- Low watt density
- Durable vinyl coating
- 30 watt gentle heating
- Great for fermenters or bottle conditioning
- Sit on top or wrap around your fermentation vessel
Dimensions: approx. 1000mm x 250mm
From: Kegland
Heavy Duty Vulcanized Latex Brewing Gloves - 55cm Long.
These heavy duty brewing gloves are made from vulcanized latex, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermzillas and those brew pots.
Tough chemical resistant material provides good protection to your hands during clean-up and sanitary handling of equipment. They are 55cm long so will also protect the forearm when reaching into harsh cleaning chemicals.
Weight: approx. 300gm
From: Kegland
You may also need a tail piece and neoprene washer.
The Heat Resistant Gloves / HIZO Oven Mitts are as impressive as they are functional with the ability to handle contact with temperatures of up to 500° Celsius (932°F). This means that it is perfect for use with oven baking, hot pots, grilling, barbecuing, and woodstoves.
Fashioned with high-quality aramid fibers which work to insulate and protect hands from burning temperatures, these gloves have a comfortable cotton and polyester lining which allows for breathability to resist sweating and a gauntlet-length style of design to protect wrists and forearm from scorching heat as well. These gloves are thick to provide excellent thermal protection and durability, but they are lightweight for extended use without fatigue.
Sizing: Medium only
With heat resistance up to 500°C, these gloves are perfect for:
- Perfect for oven baking, hot pots, grilling, barbecuing, and woodstoves
- Adjusting logs in the fireplace
- Touching scorching hot utensils or food while boiling or frying
- Changing light bulbs
Features:
- High-quality aramid fibers for insulation and cotton and polyester lining
- Designed for mobility and flexibility in mind
- Food-grade silicone layer
- Machine-washable, and can be easily hung on the line to dry
From: Kegland
30mm Hoffman Clamp - Stainless Steel.
Hoffman Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow.
Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing.
This can be particularly useful when using a liquid management still.
Size: 30mm
From: Kegland
A hole plug fitting for plugging 17mm holes.
- 304 Stainless Steel
- Includes o-ring for leak-proof seal
- Includes spare o-ring
Ideal for plugging holes from these fittings:
- Brew Bucket ball valve
- Bucket / Chronical thermowell
- Brewmaster Edition Chronical FTSs chiller coil holes
- FTSs lid holes
From: Ss Brewtech
2" Tri-Clamp Sight Glass - Hop Bong with PCO1881 Male Port and black bottle cap.
Named purely on its looks and not its function. The Hop Bong is a versatile pressurisable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory.
This particular sized tri-clamp hop bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new tri-clamp adapted pressure lid. It can also be adapted to any 2" tri-clamp port in your system to use either inline or as a dry hopping device.
Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.
Depending on how you set up your Hop Bong, the most common two fittings for the PCO Port are the Duotight 6.35mm Red Gas Carbonation Cap or Duotight 6.35mm Yellow Gas Carbonation Cap , and the Red PRV Cap.
Please note that the Hop Bong is not made from glass. It is made from special engineering plastic.
Capacity in Hop Pellets
150g to 180g
From: Kegland
This Hop Tube is made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your RoboBrew / BrewZilla without blocking the pump. It can also be used in your Brewhouse Kettle/Boiler, 19L corny keg, and the FermZilla.
It cannot fit in a standard 50L Keg as the opening is not wide enough. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel.
Diameter: approx. 66mm Heigh: approx. 300 mm.
From: Kegland
This polyester bag is perfect for small grain additions or for hopping beer. It is a tube of fabric that is approximately 15cm wide and 75cm long. Both ends are open for easy cleaning and can simply be tied closed while being used. Perfect for grain or hops (suitable for use up to 110 degrees C).
A tool for cutting hose and tube, with a stainless steel blade.
From: Krome Dispense
A hydrometer is an essential tool for testing starting and finishing gravity, or sugar content, in beer or wine or spirit fermentations. This is a triple scale hydrometer - specific gravity, potential alcohol and approx. sugar per litre.
Best used with a trial jar (sold separately).
Handcraft Supplies Triple Scale Fermentation Hydrometer measures the specific gravity, potential alcohol, and approx. sugar content of any fermentable liquid, whether you're making wine, cider, beer, or distilling wash.
Best used with a trial jar (sold separately).
Idaho 7 presents as pungent, tropical fruit and citrus (think apricot, orange, red grapefruit, papaya) with big notes of resiny pine and hints of black tea. Excellent as a single hop or part of a blend for IPA, pale ale, and other hop forward beers.
AROMA PROFILE: BERRY, BUBBLEGUM, CITRUS, STONE FRUIT, TROPICAL
Infrared Thermometer Gun -50C to +580C (Black)
This thermometer gun has a built-in Dual laser that can be switched On and Off. Dual laser is an important feature when choosing infrared thermometers because it allows for much higher accuracy of readings. When measuring an object a Dual Laser will help greatly in finding the convergence point of the measured target and the spot ratio, which can only be achieved with Dual Laser.
Features:
- Double Laser pointer for accurate target aiming
- Simple one-handed operation
- Laser ON/OFF Switch
- Low battery indication
- LED backlight system for operation under poor illumination
- C° / °F temperature unit conversion
- Automatic Power off in 15 seconds without any operation
- Display hold, scan function
Note:
1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly.
2. If you want to use boiled water to measure the quality of the product, please note that when measuring boiling liquids, do not allow smoke or water vapour to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.
Specifications:
- Temperature Range: -50 to 550°C
- Accuracy: ± 2% or 2°C
- Distance Spot Ratio: 12:1
- Emissivity: 0.1~1.0(Adjustable)
- Response Time Wavelength: 500ms & (8-14) um
- Repeatability: ± 1% or 1°C
- Resolution: 1°C or 1°F
- Storage Temperature: -20-50°C
- Operating Temperature: 0-50°C
From: Kegland
