Sort by:
This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.
Having the thermowell attach to the lid of a fermenter is ideal as it means the penetration through the fermenter body is at the top of the fermenter not below the liquid line. This makes the whole process more sanitary and reduces the number of difficult parts to clean.
This thermowell can be pushed through a bung with a 6-8mm hole but it also includes the Duotight bulkhead fitting that you can use to attach this thermowell to the lid of your FermZilla Fermenter.
It goes right into the middle of the core of your vessel meaning you get an accurate core reading of the liquid in the tank/vessel.
Note: If you need to shorten the length of this thermowell tube then simply use a tube cutter to the desired length.
Made from: 304 stainless steel
Dimensions: 8mm OD x 7mm ID
From: Kegland
Tri-Clamp Cap to Ball Lock Post fitting, with both liquid and gas post options. These 1.5" tri-clamp fittings provide a sanitary and leak-proof connection, and can be used with our ball lock connectors. The price is per single unit - gas or liquid - not for pair like in the photos.
From: Krome Dispense
Material: Stainless 304
A 304 stainless steel 1.5 inch -2 inch Tri-clover adaptor/reducer.
A 316 stainless steel 2 inch Tri Clover 90° bend.
- Short Radius (1.5x Diameter)
- 320 Grit Finish
- Pre-Welded with Tri Clover Ferrules
- 316 Stainless Steel
Standard 2" tri-clamp compatible with Grainfather GF30 Conical Fermenter Dual Valve as well as G40/G70 distilling attachments.
- 1.5" tri-clamp to 1/4" Male Threaded Flare Fitting
- 304 Stainless Construction
- Keg Directly from a Brite Tank
- Serve Directly from a Brite Tank
From: Ss Brewing Technologies, USA
A 1.5 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 1.5 Inch Bubble Plate to the 1.5 Inch Sight Glass.
Note: This is not the same seal as a standard 1.5″ Tri-Clamp seal.
A 1.5" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 1.5 inch silicone tri-clover/tri-clamp seal.
A 2 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 2 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 2 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 2 Inch Bubble Plate to the 2 Inch Sight Glass.
Note: This is not the same seal as a standard 2″ Tri-Clamp seal.
A 2" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 2 inch silicone tri-clover/tri-clamp seal.
A 304 stainless steel 2 inch -4 inch Tri-clover adaptor/reducer.
A 4 inch Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 4 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 4 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 4 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 4 Inch Bubble Plate to the 4 Inch Sight Glass.
Note: This is not the same seal as a standard 4″ Tri-Clamp seal.
A 4 inch silicone tri-clover/tri-clamp seal.
A 1.5 inch triclover sightglass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
- Dimensions: 15cm × 18cm × 11cm
A 304 stainless steel tri clover fitting that will allow you to connect 1.5″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.
Bulkhead fits hole approximately 42mm in diameter.
A 2 inch tri clover sight glass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
- Dimensions: 15cm × 18cm × 11cm
A 304 stainless steel tri clover fitting that will allow you to connect 2″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.
Bulkhead fits hole approximately 53mm in diameter.
A 4 inch tri clover sight glass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
This is a low watt density warming wand to be used on a fermenter to maintain warmer yeast profile temperatures in the colder months of the year.
- 125watt
- 1.5" Tri-Clamp
From: Kegland
