Sort by:
The new Grainfather Conical Fermenter Wireless Temperature Controller is wifi-enabled, and is designed for use with the Grainfather Conical Fermenter PRO. This all-new wireless controller is an upgrade from the original Conical Fermenter Temperature Controller, and can be easily installed on the Conical Fermenter using the directions provided.
Control the heating and cooling (when used with The Grainfather Gylcol Chiller or Cooling Pump Kit) remotely with the Conical Fermenter Wireless Temperature Controller. Simply connect the controller to the Grainfather App and control and track the fermentation temperature when you're out and about.
This new wireless controller attaches directly to the fermenter, alleviating any concern of the controller falling off the mounting bracket.
With a new and improved digital display and the flexibility the new controller offers, you are definitely going to want to upgrade.
A replacement liquid inlet for the GF30 Dual Valve.
Specifications
304 stainless steel
110 mm
Easily attach to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer. This also ensures less chance of oxygen entering the beer during transfer.
All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe.
NOTE: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed.
Specifications
High quality 304 stainless steel components
Accurate digital pressure gauge
Needle valve for precise control of pressure
Replacement high-temperature food-grade silicone hose for use with the Grainfather GF30 Conical Fermenter Pressure Transfer.
This tube can connect to the sample valve of the dual valve tap or the pressure transfer dip tube for transferring liquid out of the fermenter.
Length: 2m
The GCA Kit makes accurate temperature control more accessible for brewers. Whether you have a plastic or stainless steel fermenter, bucket or barrel, or even a conical, this kit has everything that you need to connect your fermenter to the Grainfather Glycol Chiller (sold separately).
It comes with a Glycol Chiller Adapter (GCA), heating pad, cooling coil, rubber bung, 4 x rubber bung stoppers, 2 x hose clamps and 2 x cooling connection hoses. The GCA also has wireless capabilities, making it compatible with the FREE Grainfather App, so you can control your fermentation temperature from anywhere.
Simply assemble the cooling coil and bung, and place this inside your fermenter. Attach the hoses to the cooling coil using the hose clamps and then also connect the other end of the hoses to the Glycol Chiller. Attach the heating pad and the temperature probe to the fermenter and then connect both cables to the GCA. Plug the power cord into the GCA, then connect the other end of the cord to the Glycol Chiller. Once set up and connected, the cooling coil and heating pad will regulate cooling and heating as required.
Now everyone can benefit from accurate temperature control and create even better beers!
View the Glycol Chiller Adapter Kit instructions online
The SF50 has a 50L capacity that is designed to hold batches of up to 45L. It can be adapted to suit your brewing space with an adjustable leg height and castor wheels for easy manoeuvrability. Its intuitive design, 304-grade stainless steel build, and 113° angle conical makes both fermentation and cleaning easy. A perfect brewing companion for smaller brewing systems like the S40, G30 or G40.
Product Features:
- Sleek high quality 304 grade stainless steel body
- 113° angle conical avoids yeast and sediment getting stuck to the sides of the cone.
- Adjustable leg height and castor wheels for easy manoeuvrability.
- Easily dump yeast with a separate valve.
- Insert temperature probes into the built-in thermowell for accurate temperature readings.
- Transfer and take samples above the yeast and trub line with an accessible valve on the side of the unit.
- Compatible with the GC4 for accurate temperature control.
- Comes with a 2-year warranty.
What's Included:
- Grainfather SF50 Conical Fermenter
- Stainless steel lid with 38mm tri-clamp fitting
- Rubber bung & airlock
- Thermowell (use with GCA or thermometer)
- Cone mounted 10mm stainless steel barbed sample valve
- 19mm bottom mounted stainless steel dump valve
- Adjustable and removable legs with castor wheels
SPECIFICATIONS
SIZE: 866 x 394 (h x d)
WEIGHT: 10kg
CAPACITY: 50L
POWER: None
CONNECTIVITY: None
Click here for the SF70 technical specifications.
The Grainfather Thermowell consists of a tube closed at one end which can be fitted to a fermenter and allows for the Grainfather Fermentation Thermometer, or the GCA temperature probe to be inserted.
The Thermowell is fixed to the fermenter so that the closed tube is surrounded by the fermenter contents. The thermometer or temperature probe can then be inserted to can read the temperature accurately, without touching the liquid.
A 14mm hole in the fermenter is required for installation. The Thermowell is also a spare part for the SF70.
Includes:
- Thermowell
- Nut
- O-ring
A 1 gallon (3.8 litres) wide-mouth glass jar with a plastic screw top lid. Ideal for steeping, macerating, or ageing spirit.
Could also be used as a small fermenter by making a small hole in the lid and adding a top hat grommet and airlock.
Dimensions
- Diameter: 155mm approx.
- Height: 260mm approx.
- Mouth Diameter: 100mm approx.
A 1 gallon (3.8 litres) wide-mouth glass jar with a plastic screw top lid with an airlock grommet. Ideal for use as a small fermenter.
Dimensions
- Diameter: 155mm approx.
- Height: 260mm approx.
- Mouth Diameter: 100mm approx.
A solid plastic fermenting barrel with screw top lid, airlock hole, and one litre markers down the side.
Please note that you will also need to order an airlock, airlock grommet and tap if you want a complete fermenting barrel.
Dimensions: approx. 525mm high x 300mm diameter
Handcraft Supplies 5L Fermenter is perfect for brewing up to 4.5 litre batches of wine, beer, cider, or other fermentation.
Stackable and made from food-grade plastic with litre markings on the side so you can easily see how much to top up to. Comes with a sturdy plastic handle for easy transportation.
Note: Does not include lid.
Handcraft Supplies 5L Fermenter with Lid & Grommet is perfect for brewing up to 4.5 litre batches of wine, beer, cider, or other fermentation.
Comes with a lid pre-fit with a grommet, ready for an airlock. Stackable and made from food-grade plastic with litre markings on the side so you can easily see how much to top up to. Comes with a sturdy plastic handle for easy transportation.
A 60 litre plastic carboy/barrel fermenter suitable for fermenting beer, cider, wine, or spirits.
You may also require:
The Handcraft Supplies Fermentation Equipment Kit contains the essential equipment you require for your fermentation needs. Whether you're making beer, cider, wine, or a wash for distilling, this kit enables you to get your fermentation underway and completed successfully. All you need are your ingredients and a suitable cleaner and sanitiser.
Designed for 23 litre batches. Simply assemble, sanitise and add your ingredients.
This kit is made up of:
30L Fermenter + Lid
Stick-on Thermometer Strip
Bubbler Airlock
Grommet
Tap
Plastic Spoon
Hydrometer
Handcraft Supplies fermenter set containing a 30L bucket with lid and accessories, ready to ferment. Includes litre markers down the side. Use for primary or secondary fermenter, or even as a bottling bucket.
This kit is made up of:
Stick-on Thermometer Strip
Bubbler Airlock
Top Hat Grommet
Sediment Reducer
Tap
30L Fermenter + Lid
A hole plug fitting for plugging 17mm holes.
- 304 Stainless Steel
- Includes o-ring for leak-proof seal
- Includes spare o-ring
Ideal for plugging holes from these fittings:
- Brew Bucket ball valve
- Bucket / Chronical thermowell
- Brewmaster Edition Chronical FTSs chiller coil holes
- FTSs lid holes
From: Ss Brewtech
2" Tri-Clamp Sight Glass - Hop Bong with PCO1881 Male Port and black bottle cap.
Named purely on its looks and not its function. The Hop Bong is a versatile pressurisable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory.
This particular sized tri-clamp hop bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new tri-clamp adapted pressure lid. It can also be adapted to any 2" tri-clamp port in your system to use either inline or as a dry hopping device.
Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.
Depending on how you set up your Hop Bong, the most common two fittings for the PCO Port are the Duotight 6.35mm Red Gas Carbonation Cap or Duotight 6.35mm Yellow Gas Carbonation Cap , and the Red PRV Cap.
Please note that the Hop Bong is not made from glass. It is made from special engineering plastic.
Capacity in Hop Pellets
150g to 180g
From: Kegland
This Hop Tube is made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your RoboBrew / BrewZilla without blocking the pump. It can also be used in your Brewhouse Kettle/Boiler, 19L corny keg, and the FermZilla.
It cannot fit in a standard 50L Keg as the opening is not wide enough. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel.
Diameter: approx. 66mm Heigh: approx. 300 mm.
From: Kegland
Now updated with the all new duotight 8mm Ball Lock Disconnect (Grey+Red/Gas)
This kit has been designed for simplicity and ease of putting together.
This Kit Contains:
1 x BlowTie Spunding Valve Gen 2 with 0-15psi Integrated Gauge
1 x Duotight 8mm (5/16") x Ball Lock Disconnect (Grey+ Red/Gas)
1 x Rigid 8mm Plastic Joiner
All new compact BlowTie Spunding Valve Gen2 Integrated Kit. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.
This BlowTie unit can be easily disassembled for cleaning using a Phillips head screw driver.
Designed to suit 8mm OD (5/16") Evabarrier Tubing.
Specifications:
1. Suits pressures 0-15psi (but with different gauges the unit can go above 100psi)
2. Made from food-grade acetal
3. Stainless screws
4. 8mm (5/16") push on both sides
If you are looking for a compact digital gauge with backlight illumination click here. This should only be used on a blowtie if you have excess tubing to stop liquid reaching the gauge. If liquid enters the digital gauge it will break.
These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.
This Kegmenter is bundled with a stainless 4inch tri-clamp ball lock lid which will enable you to turn your kegmenter into a unitank fermenter, and pressurisable so it can also be used as a keg.
The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can either carbonate naturally with the use of our adjustable pressure relief valve (spunding valve) or if you are using a CO2 gas cylinder you can force carbonate.
Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.
The chimes on the Kegmenters have specifically been designed to be taller than normal chimes so they are high enough to give clearance over the stainless posts on the Ball Lock Post Lid. This means the Kegmenters can be stacked. The interlocking stacking chimes means the kegs can be safely stacked up to 4 high.
Pressure Limitations
Maximum Working Pressure: 2.5 BAR
Test Pressure: 5 BAR
Wall Thickness (Body/Chimes): 1.8mm/2.1mm
Diameter: approx. 39.5cm
Height: approx. 38cm
From: Kegland
Lid pre-fit with grommet for Handcraft Supplies 10L Fermenter. Stackable and made from food-grade plastic.
Lid pre-fit with grommet for Handcraft Supplies 5L Fermenter. Stackable and made from food-grade plastic.
Lid for Handcraft Supplies 5L Fermenter. Stackable and made from food-grade plastic.
Food grade plastic lid pre-fit with grommet for Handcraft Supplies 30 L Fermenter.
Non pivot magnetic stir bar - these stir bars are excellent for your magnetic stirrer for yeast starters.
Size: approx. 27mm
From: Kegland
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits.
Heat Pad SpeCraft Series:
- Provides low, constant heat where it is needed for fermentation.
- Aids yeast activity and helps avoid stuck fermentation.
- Inexpensive to run.
- Voltage: 220-240V
- Power: 25W
- Colour: White
100mm silicone tube for connecting the 30 L Wide Mouth Fermenter Tap to a brew bottler for straight forward transfer. Made with food grade silicone.
A mix-stir agitator rod makes aerating in a carboy a breeze. Simply attach the agitator rod to your drill and you are ready to go. The blades fold up for easy insertion into any sized carboy (except 5L or under).
De-gas your wine in a few minutes, or aerate your wort for a healthy fermentation.
The mix-stir is very effective at de-gassing your wine although it should not be used for more than a few 10-15 second bursts. If you over-use the mix-stir you risk adding oxygen to your wine.
PCO1881 PRV Cap
This cap has been designed to be used with the PCO38 Tapping Head for the PET Mini Keg Range.
As it is a standard PET bottle thread (PCO1881). it can also be used on the FermZilla Collection Container / Lid.
Use with any of the four PRV valves (sold separately) - 17, 35, 65, 100PSI.
Please Note: Never exceed the pressure capabilities of your vessel. PRV's are not spunding valves!
From: Kegland
PCO1881 Male x 2 Inch Tri-Clamp (POK)
For all you hop bongers out there. We have an end cap for all end caps! The Polyketone 2 Inch Tri-Clover x PCO1881 Male Thread (PET drink bottle thread like a Schweppes / Coca Cola bottle).
Perfect to use along side the 2" Tri-Clover Hop Bong
- PCO1881 PRV Cap with a Red 35psi Pressure Release Valve
- PCO1881 6.35mm duotight x Carbonation Cap RED for Gas
- PCO1881 6.35mm duotight x Carbonation Cap YELLOW for Liquid
This product is made from high quality engineering plastic and will last a very long time. It's chemically resistant and also designed to resist impact and physical damage.
The thread specification on this product is the PCO 1881 (AKA Coke bottle thread).
From: Kegland
A replacement lid for the Plastic Barrel Fermenters. Fits both 30L and 60L fermenters.
A 12L plastic bucket fermenter set with tap that is perfect for small batches.
Dimensions (approx.): 410mm x 250mm
Kit contains the following:
- 12L Clear Fermenter Body with side hole (20mm - 23mm)
- 12L Blue Fermenter Lid - (solid)
- EZ Filter - Still Tap (Boil proof)
