Sort by:
A replacement seal for Kegland D-Type keg spears.
From: Kegland
Worn down your washers and seals from filling oodles of sodastream bottles? Then you may want to purchase some extra washers and o-rings
Includes:
1 x Nylon Regulator Washer
1 x Sodastream Black Washer
5 x Bleed Valve O-Rings
Please note these items are not sold individually, they are sold as a seal kit. Seal colour may vary.
From: Kegland
Seal Kit for both the Ball Lock and Pin Lock type Cornelius kegs.
Includes:
What is Low2?
Low2 O-Rings are the new golden yellow standard of homebrew keg parts from Kegland. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.
From: Kegland
Black Short Shank - Stainless Steel - 6.5mm (1/4'') tail suits Duotight 6.5mm Reducer.
Black stainless steel duotight compatible short shanks are the perfect addition to your black phantom font tower. Couple this with the black Nukatap Stealth Bomber for the ultimate sleek and stealthy draught setup for your kegerator or home bar.
If you still want to use a stepless clamp. Good news! You still can, just use needle nose pliers, boiling water and a positive mindset to get the hose over the barb.
These short shanks are suitable to attach taps to our kegerator fonts, and can be used to replace the short shank on any 3" diameter tower.
Item Includes:
- Blank Stainless Steel Shank with a 6.5mm duotight compatible barb
- Ring collar
- Nut
- Right angle font collar to suit font
- Shaped internal collar to suit font
NOT INCLUDED but highly recommended for 8mm OD beer line: Duotight - 6.5mm x 8mm Reducer
Common tips for cutting your beer hose for optimum flow resistance:
EVABarrier Hose - 4mm ID x 8mm OD = Reccomended 1.5m to 2.1m
EVABarrier Hose - 5mm ID x 8mm OD = Reccomended 2.0m to 3.2m
From: Kegland
A gas shut off valve (ball valve) with built in return check valve and MFL nipple.
Material: Chrome Plated Brass Thread: 1/4" x 1/4" MPT
From: Krome Dispense
This adapter allows a SodaStream cylinder to attach to a CO2 regulator for your kegging set up. It is ideal for low volume CO2 use and avoids renting or purchasing a larger CO2 cylinder. This is the deluxe version, with pin adjustment which makes the SodaStream cylinder adaptor significantly easier to use.
Normal SodaStream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically and it may leak gas when connecting and disconnecting from your regulator. This new SodaStream adaptor is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow.
This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or a picnic and you don't want to carry your 4.5kg or 2.6kg Gas Cylinder, as it will enable you to make a handy portable system.
Note: Does not include regulator or gas canister.
If you need to change the o-rings on this device here is the instruction manual on how to do this.
This easy to use SodaStream Cylinder Filling Adaptor will enable you to fill your own CO2 from your larger bulk cylinder into smaller SodaStream cylinders. An easy and inexpensive way to fill your own Sodastream Cylinders at home at a fraction of the cost of getting the refills from your local store.
Note: Does not fit or work with the latest Sodastream cylinders, only older cylinders. The CO2 Cylinder and Sodastream cylinder in the photos is not included.
When using, be sure to following these important points:
1. That the seals goes in the correct location. So when the SodaStream Filling Adaptor arrives, please make sure to use the correct seal in the correct side.
2. Make sure to put the Sodastream cylinder on the correct side. The SodaStream cylinder thread can actually fit both sides of this adaptor, but the CO2 cylinder only fit's into the ROUND SIDE. As a result you MUST put the Sodastream cylinder into the HEXAGONAL SIDE. (as shown in image)
This hose fitting is made of stainless steel and connects three lengths of hose in a branch tee. The barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp such as a stepless clamp.
Bore sizes usually available:
- 6.35mm (1/4")
- 4.76mm (3/16")
The Pluto Beer Gun has become an iconic beer dispensing tool used throughout the industry. It is indestructible and, apart from the seals, it is entirely machined out of stainless steel and you can feel it in the weight and feel when you pick it up. The accurately machined bore gives smooth laminar beer flow for foam free dispensing.
This is the premium, full stainless steel version, and comes with a barb that suits standard our beer line.
A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").
Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm
Note there is no tail piece included but a separate tail piece, nut and washer are offered as additional options.
Alternatively a Duotight 8mm - 5/8" Thread can be used.
Length: approx. 79mm (3-1/8"), 105mm (4-1/8"), or 130mm (5-1/8")
Usable length: approx. 50mm, 65mm or 80mm
Bore size: approx. 4.76mm (3/16")
Material: Stainless Steel
Made by: Krome Dispense
Short Shank - Stainless Steel (Duotight compatible).
These short shanks are suitable to attach taps to Kegerator fonts. They can be used to replace the short shank on any 3" diameter tower. If you have received this in your kegerator package and still want to use a stepless clamp. Good news! You still can, just use needle nose pliers, boiling water and a positive mindset to get the hose over the barb.
Item Includes:
NOT INCLUDED but highly recommended for 8mm OD beer line: Duotight - 6.5mm x 8mm Reducer
Common tips for cutting your beer hose for optimum flow resistance:
EVABarrier Hose - 4mm ID x 8mm OD = Reccomended 1.5m to 2.1m
EVABarrier Hose - 5mm ID x 8mm OD = Reccomended 2.0m to 3.2m
From: Kegland
The advantage of these clamps is that the inner circumference is free of any steps or gaps, making them very useful on gas and beer lines for leak proof lines.
Available in the following sizes:
You will need a Clamp Crimper tool for installation.
Tail Piece for your dispensing system that provides a 1/4" MFL connector instead of a barb. Fits nicely with our hex nut. You may also need a neoprene washer.
From: Krome Dispense
Material: 304 grade stainless steel
The MFL Tap Shank Adapter is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.
We recommend using one of the Flow Control Nukatap with this adapter as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adapter.
Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.
Note: does not include tap or disconnect.
From: Kegland
The Ultimate Growler is made from 304 Stainless Steel that is completely impervious to oxygen and sunlight (UV) meaning your precious liquid is in the absolute best storage container possible.
The Growler also comes with double wall vacuum insulation helping to keep your beer cold for hours.
This is the new improved MK2 model with new lid design. This new MK2 model is more robust and more reliable than the previous growler design.
Most screw top growlers struggle to hold the pressure required to keep beer fresh and carbonated. The Ultimate Growler comes with a spring wired lid capable of holding up to 40psi.
You can also turn your Ultimate Growler into a mini keg with the:
Features:
Tri-Clamp Cap to Ball Lock Post fitting, with both liquid and gas post options. These 1.5" tri-clamp fittings provide a sanitary and leak-proof connection, and can be used with our ball lock connectors. The price is per single unit - gas or liquid - not for pair like in the photos.
From: Krome Dispense
Material: Stainless 304
Type 30 Adaptor for Mini duotight Regulator - Suits 2-6kg Cylinders.
Want to take a huge amount of CO2 but pack as light as possible? Grab a Mini Duotight Regulator and this handy little adapter to be able to attach it to any Type 30 Cylinder (CO2). Meaning you can pour between 400 and 1000L of beer whilst on the move!
Taking your kegs on the go has never been this easy!
This adapter includes the nylon wash, ensuring a sound seal to the cylinder.
Simply thread the adapter onto your Mini duotight Regulator, or the 360 Core Actuator Regulator, then onto your 2-6kg CO2 cylinder and you're good to go!
From: Kegland
For the perfect pour, every pour, you need Ultratap.
From the inventor for the original Ventmatic (Intertap) range of tap products comes the next generation design technology that will provide you with the ultimate laminar flow experience to date.
Ultratap is the best way for your friends and customers to see your beverages being served with the most "wow factor". This tap dispenses a truly stunning pour with ease.
Ultratap’s patented all stainless steel construction utilizes 21st century, laser-precision manufacturing techniques ensure your beer meets the glass in perfect condition, every time.
Ultratap’s strength is in its simplicity. It has fewer parts and a solid, all stainless steel construction, compared to other forward sealing taps.
The secret lies within Ultratap’s unique internal surface which minimises micro eddies in the flow of the liquids with dissolved gasses before it reaches the atmosphere, gliding perfectly into your glass.
Ultratap’s forward sealing function keeps your beer fresher and will not leave a residue that will affect the tap’s performance.
For the true laminar experience look for Ultratap wherever great beer flows.
Includes a free black slender tap handle.
Note: This item is the tap & handle only.
Stainless steel adjustable Worm Clamp. These are great for gas or beer lines, or tubing on wort chillers.
Sizes:
- 3/16" (4.76mm) to 5/16" (7.94mm)
From: Krome Dispense
High quality full stainless steel (304) worm drive hose clamps. Great for clamping beer and gas line as well as any other tubing.
Features
Available sizes:
Tired of sucking air when transferring from your Fermzilla or Kegmenter? Or pulling air instead of the sweet nectar in your keg with a floating diptube. This is the solution!
Upgrade your setup with this fantastic Gen2 weighted filter! Constructed from durable HDPE and premium 304-grade stainless steel, it's built to withstand boiling and is compatible with most cleaners.
The clever 10g weighted end means no more fiddling with stainless nuts in your filter – just replace your old filter and enjoy consistent liquid draw. Finally, no more sucking up air! This Gen2 filter keeps your floating dip tube reliably below the surface.
The 304 stainless 80 mesh provides optimal filtration for hops and most solids without the frustration of frequent blockages.
If you own a FermZilla or stainless Kegmenter, this is a must-have addition!
From: Kegland
