Short Shank - Stainless Steel (Duotight compatible).

The MFL Tap Shank Adapter is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.

We recommend using one of the Flow Control Nukatap with this adapter as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adapter.

Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.

Note: does not include tap or disconnect.

From: Kegland

Temp Twister Pump Kit with Return Line and Clamp.

If a glycol chiller is a bit out of reach at the moment, but you want to use the Temp Twister in your Kegmenter or FermZilla, this little product can help you on your way to cool your fermenter. Simply submerge the pump in a large bucket with water and ice.

The more insulation you give your fermenter and keep it at a relatively stable temperature the better. We suggest using this in conjunction with a temperature controller.

Parts List:
1 x 1.2m Length of Insulated 6mm x 9mm EVABarrier Hose
1 x 1.2m Length of 6mm x 9.5mm hose (return line back to the bucket) (colour may vary)
2 x 9.5mm duotight Elbows (For temp twister)
1 x Temp Twister 12v Pump and power supply

From: Kegland

The Ultimate Growler is made from 304 Stainless Steel that is completely impervious to oxygen and sunlight (UV) meaning your precious liquid is in the absolute best storage container possible.

The Growler also comes with double wall vacuum insulation helping to keep your beer cold for hours.

This is the new improved MK2 model with new lid design. This new MK2 model is more robust and more reliable than the previous growler design.

Most screw top growlers struggle to hold the pressure required to keep beer fresh and carbonated. The Ultimate Growler comes with a spring wired lid capable of holding up to 40psi.

You can also turn your Ultimate Growler into a mini keg with the:

• Beer Growler Draft Kit
• Mini CO2 Regulator - Mangrove Jack's Portable CO2 Kit or Regulator - Mini 360 Core Actuator
• CO2 Cartridges

Features:

• 304 Stainless Steel
• Double Wall Vacuum Insulated
• Sprung Wire Lid
• 2L capacity

A bi-metal weldless thermometer with glass face. Ideal for fitting to your mash tun, hot liquor tank or kettle.

Features:
- Calibration screw so you can fine tune the temperature
- 304 stainless steel housing and probe
- ½” BSP thread and includes silicon and stainless steel washers.
- Temperature range -5C to 100C customised for brewing

Includes a slimline nut and 2 x silicone seals plus a stainless washer.

From: Kegland

A stainless steel, 1/2" thread, weldless thermowell (takes any probe up to 7mm ID).

This thermowell works great with any kegmenter, keggle, brew pot, boiler and various other brewery hardware to get an accurate core temperature of your vessles.

This thermowell has a 7mm bore, so it's ideally suited to any probe type up to 7mm.  Most probes are 6.5mm or smaller in diameter meaning they will fit nicely into this well.  It's ideal for the RAPT Temperature controllers.

This is a weld free design so all you need to do is drill a 20mm hole and file this out a fraction and this will go right into the hole with no welding required.  The threads have been designed to be sanitary so you just screw it against your vessel wall and none of the threads will be exposed to liquid. The soft silicon seals will seal against curved surfaces of your pots and other vessels.

If you want to make a really smooth hole easily in your vessel walls we recommend the use of a step drill bit and 20mm hole punch.

Length: approx. 100mm
From: Kegland

This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.

Having the thermowell attach to the lid of a fermenter is ideal as it means the penetration through the fermenter body is at the top of the fermenter not below the liquid line. This makes the whole process more sanitary and reduces the number of difficult parts to clean.

This thermowell can be pushed through a bung with a 6-8mm hole but it also includes the Duotight bulkhead fitting that you can use to attach this thermowell to the lid of your FermZilla Fermenter.

It goes right into the middle of the core of your vessel meaning you get an accurate core reading of the liquid in the tank/vessel.

Note: If you need to shorten the length of this thermowell tube then simply use a tube cutter to the desired length.

Made from: 304 stainless steel
Dimensions: 8mm OD x 7mm ID
From: Kegland

Type 30 Adaptor for Mini duotight Regulator - Suits 2-6kg Cylinders.

Want to take a huge amount of CO2 but pack as light as possible? Grab a Mini Duotight Regulator and this handy little adapter to be able to attach it to any Type 30 Cylinder (CO2). Meaning you can pour between 400 and 1000L of beer whilst on the move! 

Taking your kegs on the go has never been this easy!

This adapter includes the nylon wash, ensuring a sound seal to the cylinder. 

Simply thread the adapter onto your Mini duotight Regulator, or the 360 Core Actuator Regulator, then onto your 2-6kg CO2 cylinder and you're good to go!

From: Kegland

This is a low watt density warming wand to be used on a fermenter to maintain warmer yeast profile temperatures in the colder months of the year.

• 125watt
• 1.5" Tri-Clamp

From: Kegland

Tired of sucking air when transferring from your Fermzilla or Kegmenter? Or pulling air instead of the sweet nectar in your keg with a floating diptube. This is the solution!

Upgrade your setup with this fantastic Gen2 weighted filter! Constructed from durable HDPE and premium 304-grade stainless steel, it's built to withstand boiling and is compatible with most cleaners.

The clever 10g weighted end means no more fiddling with stainless nuts in your filter – just replace your old filter and enjoy consistent liquid draw. Finally, no more sucking up air! This Gen2 filter keeps your floating dip tube reliably below the surface.

The 304 stainless 80 mesh provides optimal filtration for hops and most solids without the frustration of frequent blockages.

If you own a FermZilla or stainless Kegmenter, this is a must-have addition!

From: Kegland