Sort by:
This Push-Fit Two-Way Divider will split the gas (or beer) line on your kegging system in two, allowing you to gas two kegs at the same time.
Note that this is 10mm diameter in and out.
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
RAPT - Bluetooth Thermometer -20 to 300C - 20cm HTC Probe
This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of these devices.
By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process. For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/
Along with this ease of access and control,the RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the probe is. Greater accuracy for a more repeatable recipe that results in much better beer!
Specifications:
From: Kegland
Yellow RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth).
The RAPT Pill allows true real-time specific gravity and temperature logging and control via wifi/bluetooth integration (see note below) with the RAPT fermentation chamber, RAPT mobile app or RAPT IOT.
The RAPT Pill acts as both a real-time gravity testing hydrometer and thermometer allowing instant gravity and temperature measurements and also logging from inside your fermenter during fermentation.
The RAPT Pill boasts many advantages over other wireless hydrometers and thermometers including tough design, better ergonomics, sanitary design and less susceptible to error as a result of hops, krausen or CO2 bubbles generated from fermentation.
Important Note: Ensure the RAPT Pill is charged for 24 hours before use. This is to ensure that it is fully charged and the battery is callibrated.
Once the RAPT Pill is connected via USB-C and connected to wifi, the firmware will automatically update to the current version (if needed). The Pill must be plugged in via USB-C and connected to WiFi in order to receive firmware updates. A 2.4gHz network is required.
Recommended Accessory
The pill hydrometer will need to be charged periodically with a USB type C cable. Every time you open and close the pill it is possible that you have not done up the housing to the same tightness. As a result it's a good idea to mark the housing so you always do up the two halves to the same tightness or preferably re-calibrate the device. If however you purchase this Wireless Charging Kit you can avoid opening and closing the pill when charging. This greatly increases the accuracy and eliminates the need to continue to keep calibrating.
Download the App
The web wrapper application will assist in rendering the app.rap.io webpage into your mobile device screen. It also allows for push notifications to work to your mobile device.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/apps/details?id=io.rapt
The Apple App Store RAPT App can be downloaded via the link below.
https://apps.apple.com/th/app/rapt/id1573192994
Bluetooth Bridge
Although the Pill Hydrometer will work in wifi mode the optimal solution is to use the Pill in bluetooth mode as this has several advantages including:
1. Bluetooth is more power efficient so it saves battery life. This enables the Pill to save battery by only using power efficient as it's only giving out low energy Bluetooth beacons but then the bridge device that is connected to mains power is doing the heavy lifting and transferring that data to the RAPT web portal. This is by far the most reliable way to use the Pill Hydrometer.
2. Bluetooth signal is better at penetrating through the fermenter more easily especially if you have a stainless steel fermenter or fermenter inside a fridge or fermentation chamber.
3. Bluetooth bridge mode allows you to use the Pill Hydrometer as the temperature probe to get a core fermenter temperature without the need for a thermowell. The onboard Pill Temperature sensor is also very accurate as it's an onboard digital sensor with no flexible cable. (please not if you have just charged or been in AP mode excessive heat from the battery does effect temperatures readings so wait 30min after charging for the battery temp to reach equilibrium)
4: Bluetooth connectivity allows for powerful fermentation control with the ability to use gravity and gravity acceleration to set automatic and accurate fermentation control.
To take advantage of the Bluetooth bridge mode you will need to pair the RAPT Pill to either a RAPT fermentation chamber or a RAPT Temperature Controller.
Please watch the youtube video on how to do this.
Long Battery Life
The RAPT Pill has a long battery life and can last 5 months between charges when utilising Wifi. If only using Bluetooth the battery can last 2+ years before needing to be recharged. The RAPT Pill has a USB-C charging port on the circuit board allowing fast charging from any USB-C cable.
How long will the pill last between charges?
60min telemetry frequency - 1.5 years
30min telemetry frequency - 9.5 months
15min telemetry frequency - 5 months
Note: This is the default telemetry frequency is 60 min so if you do not change the settings then out of the box the battery should last 1.5years approximately.
Pill Housing Design
The RAPT Pill housing boasts many advantages compared to other wireless hydrometers such as:
Different housing colours are sold separately, allowing customisation of your RAPT Pill.
Specifications:
Temperature Accuracy: +/- 0.2C (0.36F)
*Accuracy will be effected if solids are stuck to the outside of the pill hydrometer. If you shake the fermenter from time to time this generally helps to wash hops and solid chunks of krausen off the body of the Pill and through the fermentation these will generally drop to the bottom of the fermenter.
New Gravity Velocity Function
If you update your firmware we now have a new Gravity Velocity (GV) data stream that gives you the ability to automate your fermentation profiles more reliably. See this video on how to do this:
What is RAPT?
The RAPT IOT Hub is a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notification in the off instance that something doesn't go to plan.
There is no limit to the number of RAPT devices you can connect the RAPT IOT Hub. This is in contrast to other popular wireless hydrometers where you are limited by the number of hydrometers you can connect to an app.
Please note:The RAPT Pill is fully wifi and Bluetooth capable. Bluetooth integration requires a compatible RAPT Bluetooth enabled device such as a RAPT Fermentation Chamber or RAPT Temperature Controller.
RAPT Pill - Blue Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
RAPT Pill - Clear Housing (Male Threaded - Bottom Piece).
Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.
RAPT Pill O-Ring sold separately.
From: Kegland
RAPT Pill - Green Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
RAPT Pill - Red Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
A replacement silicone o-ring for the RAPT Pill.
It is always wise to have a few spares in case some get pinched when tightening up the RAPT Pill.
Sold individually.
From: Kegland
Charge your Pill wirelessly with this easy-to-install upgrade kit from Kegland. The RAPT Pill is a Wifi & Bluetooth hydrometer for logging fermentation to the cloud.
This easy to install kit allows you to wirelessly charge the Pill, and also access the Pill Captive Portal without needing to open the housing to access the USB-C port!
Includes:
1 x USB-C Wireless Charging Coil
2 x Adhesive Weight Pads
1 x USB-A to USB-C cord (AU power plug not supplied)
1 x Black RAPT Wireless Charging Dock (USB-C)
If the green light does not flash green (captive portal open), it means your battery is insufficiently charged. Leave your pill on the charging pad for 24 hours or until it is fully charged (red light turns off). Then lift the Pill on and off the charging pad and it will activate the captive portal (green light will start to flash).
Note: RAPT Pill sold separately, this is for the wireless charger only.
From: Kegland
This RAPT wifi connected temperature controller box will enable you to monitor, track and control heating and cooling devices remotely through the internet. Set complex temperature profiles so the temperature will automatically change over time.
It connects with the RAPT web portal meaning that you can monitor, log and control the devices plugged into this temperature controller box remotely.
The colour screen clearly displays temperature, graphs of future and past temperature settings, and makes it much easier to perform profile temperature steps.
This plug and play temperature controller box has two clearly marked blue and red power sockets for heating and cooling so you can control a fridge or heating device at the same time to completely monitor and control the temperature. Each power outlet is rated to 10amp (2400 Watt max).
PID Included
This temp controller box comes with PID heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation.
Temperature Range
The temperature range of this device will enable you to control devices from -20C and up to 120C.
Various Mounting Options
This innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brewery. Simply unscrew the mounting plate and switch the mounting to your preferred orientation.
RAPT Wifi Compatible
This product will connect with the https://app.rapt.io/ portal. This portal will enable you to monitor, control and log past temperature and also show a future projection of temperature profiles that you might have running.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/
The Apple App Store RAPT App can be downloaded via the link below.
https://apps.apple.com/th/app/
"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device. It also gives you the added functionality of push notifications to your mobile device."
From: Kegland
The Red Reaper Counterflow chiller is the latest homebrew chiller on the market.
Red Reaper Counterflow Chiller (PEX / Copper) 9.5mm duotight compatible.
This particular CFC uses PEX tubing that is swaged/soldered to the copper wort pipe. Not only does this provide a superior method of connection compared to a clamp, but also ensures a lifetime guarantee that the mains water you're using to chill your wort down will never get to the pressures requires for the PEX to break.
Paired with the duotight 9.5mm range, you'll be able to attach your hose / camlock fittings within seconds.
This particular kit does not come with 9.5mm push in fittings.
Specifications:
Recommended Cleaners:
PBW Powder (Optimum 80°C) minimum contact time 5minutes. Remember to change the flow back and forth to really get the deepest clean possible. Rinse with the same temperature water.
We would always recommend to recirculate your last 15 minutes of the boil in your Red Reaper to sanitise it before applying cold water to the chiller.
Using the incredibly pressure and temperature resistant style of hosing used widely inplace of copper in the plumbing industry. Partly due to its flexibility and ease of manufacturing.
The Red Reaper A-PEX CFC is a chilling beast, with an internal copper tubing where you wort will recirculate. and cool down You'll get a large amount of heat transfer from the copper and the cold water passing in the opposite direction.
The typical design of a CFC is usually copper tubing housed within another tube. The outer tubing is fed with a cold water source flowing in one direction, while hot wort is pumped through the inner copper tubing in the opposite direction. The main benefit is efficient single-pass chilling from a rolling boil down to pitching temps. CFCs function similarly to a plate chiller but have a larger overall area for the wort to flow through. The benefit is the reduced risk of clogs from hops. The downside is they take up more space than a plate chiller.
What is PEX?
PEX tubing, short for cross-linked polyethylene, is a flexible plastic pipe used as an alternative to traditional copper or steel pipes for plumbing.
Do not store in sunlight. It will degrade the PEX overtime.
Do not store with StellarSan or any acidic products. It will break down copper.
From: Kegland
In Line Regulator with 8mm push fit connections.
This unit has no gauge. Looking for the Duotight Inline Regulator with Gauge?
This inline regulator is suitable for gas or liquid. The design has two main features:
1. Push In 8mm
It comes with 8mm push fit connectors so you can push your beer, water, gas line directly into the unit. No need for hose clamps, just push your EVABarrier line directly into the connector and it's securely joined.
2. Handy Tee Bar Adjustment
These have been designed with a highly visible yellow tee bar adjustment knob. Significantly easier than the previous designs that required a phillips head screw driver to adjust the pressure.
Constructed with Non-Corrosive Acetyl, Nitrile & Stainless Components. The Regulator body has two wall mounting points.
These regulators work great for reducing your mains pressure from 0-159psi. The maximum inlet pressure is 150psi.
From: Kegland
KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible
The All-New Mini 360 Core Actuator Regulator is the most versatile mini regulator on the market. It is an extremely versatile mini regulator that can be used with either a Sodastream Canister, or the smaller disposable CO2 16g bulbs.
Unlike other regulator designs this new design requires no sodastream adaptor and you do not have the issues of trying to screw the bulb or sodastream cylinder into the regulator while gas leaks everywhere. This robust, convenient and superior design is just what you need for any portable keg system.
Please note this is not compatible with the 2kg, 3.5kg or 5.0kg CO2 Cylinders.
Features:
Includes:
1 x Mini 360 Core Actuator Regulator
1 x 360° 6.5mm duotight compatible hose barb
1 x 360° FFL Fitting for MFL Disconnects
1 x Port end cap
1 x 65psi Green PRV
1 x Sodastream to 16g thread bushing
Upgrade to digital:
Upgrade to a more accurate digital gauge with this gauge. This mini gauge is easier to read and has a backlight so you can also read the pressure easily in the dark.
WARNING:
Do not over tighten onto your cylinder. It is recommended that you use a spanner to hold the neck of your Sodastream cylinder while attaching and detaching the Mini 360 Core Actuator Regulator.
From: Kegland
A seal kit for the Mini 360 Core Actuator Regulator. Contains the o-rings for the piston, the red inlet washer, MK4 seat assembly o-ring, 2 x barbMFL outlet o-rings and x thumb screw o-rings.
For instructions on replacing the seals and/or general maintenance please refer to the product manual here.
From: Kegland
Mini duotight Regulator - 6.35mm (1/4'') Suits 16g and 74g Bulbs
Perfect introductory regulator for mini keg / oxebar keg set ups. This compact unit can take 16g and 74g CO2 bulbs. Travellers have never been so easy!
This regulator features a 6.35mm Duotight compatible barb, meaning you can connect just about anything within a matter of seconds. The most common easy attachment to your ball lock kegs would be adding 1 x Duotight 6.35mm (1/4") x Ball Lock Disconnect - (Grey + Red Gas).
If however you want to be a bit more protective with your beer not shooting back into the regulator you could minimise the damage by using a 6.35mm check-valve and some hosing to your ball lock disconnect.
Suitable Gas Cartridges are:
16g Cartridge / Bulbs
74g Big Bulb CO2 Cartridge 5/8-18UNF Thread
Please note, once you get liquid shoot back through it, it's no longer functional. Be extremely careful with overfilling your kegs or tipping them over when the gas has run out.
This regulator is capped at dispensing 30psi to ensure you do not accidentally over carbonate or exceed your kegs pressure rating. The gauge, however, shows up to 60psi just in case by heat ingress / expansion that it does not break the gauge.
From: Kegland
Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)
The MK5 Dual Gauge Regulator by KegLand now comes in a tool-free design with a heap of new features.
Latest Features
1. One handed tightening to the Cylinder. No spanner / wrench is required to attach the Regulator to your CO2 Cylinder. You can easily attach it with the nut-hand-wheel with one hand. This is due to a new spigot seal design that easily compresses without risk of damaging the seal or leaking.
2. Self servicing maintenance without the need for a vice or specialised equipment. Now with the regulators internals being shrunk down and accessible from the back plate. You can now easily undo the area with the regulator knob that has an M8 Hex / Allen key head and clean out your regulator if you have a contaminant in there.
3. Output with Check Valve, Ball Valve & Integrated 8mm duotight push in.
4. Triple scale Class 2.5 Gauges in kPa, Bar and PSI (+-2.5% Accuracy).
5. Brand new seat cap assembly design. The new seat cap is made of ultra high molecular polyethylene. That basically means from hardcore use and abuse that us homebrewers give regulators like force carbonating. The seat cap that is bouncing up and down is less likely to scratch and create brass finings that could otherwise cause pressure creep down the line from an internal contaminant going upstream.
6. Stronger Steel Gauges made from thicker steel.
7. Colour Coded PRV valves. This unit comes with a 65psi Green PRV. It does not come with a Red 35psi or Grey 100psi PRV
8. M6 Mounting Holes for easy Mounting. Please note, you will need to remove the nut-wheel as it will foul when mounting flat.
From: Kegland
The Precision Plus CO2 Regulator is the perfect choice for ensuring precise and consistent control over the CO2 levels in your beverage dispensing system. With a sleek chrome-plated finish, this regulator not only performs exceptionally but also adds a touch of elegance to your setup.
Designed with a robust construction and advanced features, it guarantees reliability and durability for both commercial and home use. The regulator comes equipped with a 0-60 PSI outlet connection, and a 0-3000 PSI inlet connection, making it versatile for various applications. Additionally, the double inlet filter with 200 microns and 100 microns capacity ensures clean and smooth operation.
The Precision Plus CO2 Regulator is ideal for a variety of beverage dispensing systems, including beer kegerators, soda machines, and other CO2-powered applications. It ensures that your beverages are carbonated to perfection, offering consistent performance whether in a commercial bar or restaurant setting or for home use. The robust construction and precise control make it a reliable choice for anyone looking to maintain optimal CO2 levels in their beverage dispensing system.
Now with 8mm push-fit outlet.
This regulator comes with a tamper evident cap. Tamper evident caps help ensure consistent dispensing pressure, which is crucial for quality control in beverage dispensing. Prevent unauthorised or accidental manipulation of the pressure settings on your CO2 system. Improperly adjusted CO2 pressure can lead to over-carbonation or under-carbonation of beverages, which can affect taste and safety. It is quick and easy to install the tamper evident cap by following these steps.
From: Krome Dispense
A nylon regulator washer to fit the range of MK regulators (MKI, MKII, MKIII & MK4). Plumbers tape not required. Simply screw your regulator in tightly, the washer will make a complete seal.
From: Kegland
Replacement camlock seals.
Material: Silicone
Supplier: Kegland
Replacement Soft Red Easy-Tight Washer for the MK5 Kegland Regulator only.
Specifications:
17.5mm x 11mm x 3.5mm
Not suitable for any other regulator on the market.
From: Kegland
Replacement Silicone Seal for 65L BrewZilla Boiler Extension (24L).
You'll find the Brewzilla Boiler Extension Kit here.
From: Kegland
Worn down your washers and seals from filling oodles of sodastream bottles? Then you may want to purchase some extra washers and o-rings
Includes:
1 x Nylon Regulator Washer
1 x Sodastream Black Washer
5 x Bleed Valve O-Rings
Please note these items are not sold individually, they are sold as a seal kit. Seal colour may vary.
From: Kegland
Seal Kit for both the Ball Lock and Pin Lock type Cornelius kegs.
Includes:
What is Low2?
Low2 O-Rings are the new golden yellow standard of homebrew keg parts from Kegland. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.
From: Kegland
Black Short Shank - Stainless Steel - 6.5mm (1/4'') tail suits Duotight 6.5mm Reducer.
Black stainless steel duotight compatible short shanks are the perfect addition to your black phantom font tower. Couple this with the black Nukatap Stealth Bomber for the ultimate sleek and stealthy draught setup for your kegerator or home bar.
If you still want to use a stepless clamp. Good news! You still can, just use needle nose pliers, boiling water and a positive mindset to get the hose over the barb.
These short shanks are suitable to attach taps to our kegerator fonts, and can be used to replace the short shank on any 3" diameter tower.
Item Includes:
- Blank Stainless Steel Shank with a 6.5mm duotight compatible barb
- Ring collar
- Nut
- Right angle font collar to suit font
- Shaped internal collar to suit font
NOT INCLUDED but highly recommended for 8mm OD beer line: Duotight - 6.5mm x 8mm Reducer
Common tips for cutting your beer hose for optimum flow resistance:
EVABarrier Hose - 4mm ID x 8mm OD = Reccomended 1.5m to 2.1m
EVABarrier Hose - 5mm ID x 8mm OD = Reccomended 2.0m to 3.2m
From: Kegland
These washers are compatible with any 1/2 BSP plumbing hardware.
The silicone rubber in these washers is suitable for temperatures up to 250°C.
This is made from food grade silicone and will not perish like some other rubber washers.
Dimensions: 21mm(ID) x 31mm(OD) x 2mm (thickness)
From: Kegland
This adapter allows a SodaStream cylinder to attach to a CO2 regulator for your kegging set up. It is ideal for low volume CO2 use and avoids renting or purchasing a larger CO2 cylinder. This is the deluxe version, with pin adjustment which makes the SodaStream cylinder adaptor significantly easier to use.
Normal SodaStream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically and it may leak gas when connecting and disconnecting from your regulator. This new SodaStream adaptor is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow.
This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or a picnic and you don't want to carry your 4.5kg or 2.6kg Gas Cylinder, as it will enable you to make a handy portable system.
Note: Does not include regulator or gas canister.
If you need to change the o-rings on this device here is the instruction manual on how to do this.
This easy to use SodaStream Cylinder Filling Adaptor will enable you to fill your own CO2 from your larger bulk cylinder into smaller SodaStream cylinders. An easy and inexpensive way to fill your own Sodastream Cylinders at home at a fraction of the cost of getting the refills from your local store.
Note: Does not fit or work with the latest Sodastream cylinders, only older cylinders. The CO2 Cylinder and Sodastream cylinder in the photos is not included.
When using, be sure to following these important points:
1. That the seals goes in the correct location. So when the SodaStream Filling Adaptor arrives, please make sure to use the correct seal in the correct side.
2. Make sure to put the Sodastream cylinder on the correct side. The SodaStream cylinder thread can actually fit both sides of this adaptor, but the CO2 cylinder only fit's into the ROUND SIDE. As a result you MUST put the Sodastream cylinder into the HEXAGONAL SIDE. (as shown in image)
Replacement Lid Seal for SS Brewtech Brew Buckets and Chronicals; made from brewer's grade silicone.
These also fit the FTSs lids at the matching size.
From: Ss Brewing Technologies
Stainless steel worm style hose clamp which fits a variety of hose types.
This hose clamp features a butterfly/key type adjustment tab which makes it easier to grip onto and tighten/loosen the clamp without the need for any tools.
If a larger diameter is required then multiple worm type hose clamps can be attached together.
Sizes available:
From: Kegland
This hose fitting is made of stainless steel and connects three lengths of hose in a branch tee. The barbed fittings create a tight seal on flexible and semi-rigid hose when used with a hose clamp such as a stepless clamp.
Bore sizes usually available:
- 6.35mm (1/4")
- 4.76mm (3/16")
A quality mash paddle is an essential piece of equipment for all-grain brewers.
This high quality stainless steel mash paddle is approximately 61cm long and will make stirring the mash and avoiding dough balls a much simpler task. Avoiding the formation of dough balls during the mash is important to ensure the full extract potential of the mash is achieved.
The paddle is also perfect for all other stirring duties and may even be used to knock down the hot break at the beginning of the boil.
The Pluto Beer Gun has become an iconic beer dispensing tool used throughout the industry. It is indestructible and, apart from the seals, it is entirely machined out of stainless steel and you can feel it in the weight and feel when you pick it up. The accurately machined bore gives smooth laminar beer flow for foam free dispensing.
This is the premium, full stainless steel version, and comes with a barb that suits standard our beer line.
