This high-quality sight glass botanical basket set is designed for use with 2” tri-clamp compatible distilling systems. This set can be used as a sight glass to monitor your distillation run or attach the mesh filters as per the instructions to convert the sight glass into a botanical basket. The sight glass will hold up to 150 g (5.2 oz) of botanicals and is suitable for fine botanicals. Compatible with 2” tri-clamp distilling systems, including the Grainfather G40/G70 Distilling Lid T500 Reflux Attachment Kit and Grainfather G40/G70 Distilling Lid T500 Alembic Attachment Kit.

Includes

• 1 x Sight glass botanical basket with 2" tri-clamp ferrules
• 1 x 2” Tri-clamp
• 2 x Mesh filters (size 10)

Instructions:

For use as a botanical basket:

1. Attach the sight glass to the lid of your distilling system using one of the mesh filters and the 2” tri-clamp.
2. Fill the sight glass with your desired amount of botanicals - up to a maximum of 150 g (5.2 oz).
3. Put the second mesh filter on the top of the sight glass.
4. Using a 2” tri-clamp connect the top of the sight glass to your condensing set up.

For use as a sight glass: Attach the sight glass to your distilling system (mesh filters are not required).

Cleaning: Clean with warm water and a suitable brewery cleaner. Using a pipe brush, clean away all residual oils on the glass. Disassembly should only be required if heavy soiling around the silicone components exists. Sanitation is not needed in this application.

Note: For use as a column extension with packing material coarse mesh is required to prevent flooding.

Specifications

• Dimensions: 246mm (h) x 100mm (w) x 100mm (d)
• Weight: 1.49 kg

CAUTION: After distillation is complete, the sight glass will be very hot. Allow to cool before handling

The ATF Czech Pale Lager is the Bohemian Pilsners little brother. A lighter-bodied, refreshing, hoppy, bitter pale lager.
Bready malt on the nose with earthy floral notes from the Saaz hops. Light and crisp in the mouth with a light bready maltiness balanced by a firm bitterness and drying finish.

Yeast is not included in the kit. If fermenting cold we recommend using Froth Vagabond (Assumed Origin: Budêjovický Budvar) or:

• Mangrove Jack's Bohemian Lager yeast or
• Fermentis SafLager W-34/70 or
• Lallemand Diamond Lager Yeast

If fermenting warm we recommend using Fermentis SafLager W-34/70 or Mangrove Jack’s Californian Lager.

Fermentis SafLager W-34/70

Sensory testing performed by Fermentis on W-34/70 shows that it is a very robust yeast capable of providing a clean neutral flavour profile across a wide range of fermentation temperatures (12℃ - 20℃). Click here to download the Fermentis iPhone app for more information.

Note on Water Profile

The recommended water profile for this beer is very soft with no more than 7ppm of any mineral.

The beer may be brewed using other water sources, but may not have the same soft delicate mouthfeel and bitterness. Rainwater, reverse osmosis water, or bottled spring water is ideal. 

The ATF Czech Pale Lager is the Bohemian Pilsners little brother. A lighter-bodied, refreshing, hoppy, bitter pale lager.
Bready malt on the nose with earthy floral notes from the Saaz hops. Light and crisp in the mouth with a light bready maltiness balanced by a firm bitterness and drying finish.

Yeast is not included in the kit. If fermenting cold we recommend using Froth Vagabond (Assumed Origin: Budêjovický Budvar) or:

• Mangrove Jack's Bohemian Lager yeast or
• Fermentis SafLager W-34/70 or
• Lallemand Diamond Lager Yeast

If fermenting warm we recommend using Fermentis SafLager W-34/70 or Mangrove Jack’s Californian Lager.

Fermentis SafLager W-34/70

Sensory testing performed by Fermentis on W-34/70 shows that it is a very robust yeast capable of providing a clean neutral flavour profile across a wide range of fermentation temperatures (12℃ - 20℃). Click here to download the Fermentis iPhone app for more information.

Note on Water Profile

The recommended water profile for this beer is very soft with no more than 7ppm of any mineral.

The beer may be brewed using other water sources, but may not have the same soft delicate mouthfeel and bitterness. Rainwater, reverse osmosis water, or bottled spring water is ideal. 

A 304 stainless steel tri clover fitting that will allow you to connect 2″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.

Bulkhead fits hole approximately 53mm in diameter.

A 304 stainless steel tri clover fitting that will allow you to connect 1.5″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.

Bulkhead fits hole approximately 42mm in diameter.

100mm silicone tube for connecting the 30 L Wide Mouth Fermenter Tap to a brew bottler for straight forward transfer. Made with food grade silicone.

Screw-in tap for use with Handcraft Supplies 30L Wide Mouth Fermenter. Simply screw the tap in the pre-drilled hole at the bottom of the fermenter before filling the fermenter with your ingredients. Mangrove Jack's Silicone Hose 100mm is required to connect the tap to a brew bottler. Not compatible with sediment reducer.

Smoothing agent to improve fullness and mouthfeel when added to flavoured spirit. Odourless with a slightly sweet taste.

Our Glycerine is naturally derived from refined vegetable oil and is vegan friendly.

Ingredients

Glycerine.

A 1.5 inch triclover sightglass made from 304 stainless steel.

Specifications

• Made from 304 stainless steel
• Viewing lens is High Borosilicate glass
• Operating Temp:  -20-+135℃
• Max pressure: 40PSI
• Weight: 1.5kg
• Dimensions: 15cm × 18cm × 11cm

Lead free brass adaptor, is attached to the boiler lid with the original locking nut of a different manufacturer to convert condenser with DN40 or 1 1/2″ BSPP thread to a triclover mount attachment. The adaptor requires a 1 1/2″ Seal (Still Spirits T500 Column O-Ring) to make a sound join.

Lead free brass adaptor that screws into the lid of the Pure Distilling Boiler and attaches to a triclover fitting.

A replacement seal for Kegland D-Type keg spears. 

From: Kegland

3 x Quality hose connectors to fit your Pure Distilling condenser snap on hose fittings or other hose fittings.

The Smart Filter System is designed to simplify the process of diluting & filtering your spirits. Fill up the top bucket with up to 10L of 0-50%ABV spirit and let the Premium Carbon Cartridge work its magic!

Spirits can be collected straight into filter then diluted and filtered all in one go. Just insert the provided stainless plug into top filter collect, then dilute, pull the plug and filter straight away.

Features

• All stainless steel spindle with silicone washers
• Huge 10L capacity
• Easy set up and use
• Double the carbon cartridge size of other filter cartridges for the purest neutral spirit.

Smart Filter Instructions

A 500mm copper extension with 60cm size thread to extend you Pure Distilling condenser.

Weight: 1.25kg

Dimensions: 3.5cm × 6.5cm × 53.5cm

A replacement carbon cartridge for the Smell Eliminator Kit. Made from a specially designed dense carbon block, it will last for 5 brews or washes. Will not filter liquids.

The Smell Eliminator Kit completely eliminates ALL smells from the fermentation process for both beer and spirits.

Includes everything you need to attach to a standard fermenter with airlock (airlock not included).

Now you can ferment wherever is best to maintain your desired fermentation temperature without worrying about the smell.

The carbon cartridge for the Smell Eliminator Kit is made from a specially designed dense carbon block, which will last for approximately 5 brews or washes. Will not filter liquids.

Made from 304 stainless for hygiene and will last a lifetime.

Instructions: The Smell Eliminator Kit

A 100mm copper extension with 2 inch triclover fittings that can be used to extend your condenser.

Weight: 0.780kg

Total Length (including brass fittings): 165mm

A 100mm copper extension with 60cm size thread to extend you Pure Distilling condenser. 

Weight: 0.615kg

Total Length (including brass fittings): 140mm

Premium 8 Spirit Yeast is a high-performance yeast designed for consistent, reliable fermentation with excellent alcohol yield and clean results. An excellent all-round spirit yeast, it is best suited to 8 kg sugar or 9 kg dextrose washes where maximum alcohol yield and strong fermentation performance are required. It can also be used with 6 kg sugar or 7 kg dextrose washes for fast fermenting.

Key Features:

• Ideal for 8 kg sugar or 9 kg dextrose washes

• Makes a 20% ABV wash

• Low odour during fermentation

• Clean, smooth spirit quality

• Produces 4.5L @ 93% ABV with the Pure Distilling Reflux Condenser

• Can produce up to 4.7L @ 93% ABV with the Pure Distilling Output Cooler upgrade

Ingredients – Active dry yeast, yeast nutrient. Urea Free.

Product packaging may vary from image as we transition to new designs.

The Pure Distilling Filter Spindle Kit is a must have upgrade to your spirit filtering system. Fits the EZ Filter and can be attached to anything using a 12mm hole.

Made from stainless steel it is extremely durable eliminating the issue of broken plastic spindles and ensuring long-lasting performance. 

Comes with the the much larger Premium Carbon Cartridge, double the size of other cartridges on the market, elevating the flavour and quality of your distilled spirits

Fits the EZ Filter System, no more broken plastic spindles and two times the carbon!

A 2 inch tri clover sight glass made from 304 stainless steel.

Specifications

• Made from 304 stainless steel
• Viewing lens is High Borosilicate glass
• Operating Temp:  -20-+135℃
• Max pressure: 40PSI
• Weight: 1.5kg
• Dimensions: 15cm × 18cm × 11cm

A 4 inch Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.

A 304 stainless steel 2 inch -4 inch Tri-clover adaptor/reducer.

A 4 inch silicone tri-clover/tri-clamp seal.

A lead free brass adaptor that screws into the base of a condenser with DN40 or 1 1/2″ BSPP thread (such as T500 Reflux Condenser) to convert to a triclover mount attachment. The adaptor has a screen to hold the condenser packing in place.

A 500mm copper extension with 2 inch triclover connections. Use to extend your condenser, attach additional hardware, mesh screens, sight glasses and more!

Weight: 1.25kg

Dimensions: 3.5cm × 6.5cm × 53.5cm

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost. 

The Kegmaster Premium XL 2 Tap Kegerator from Keg King is a premium kegerator full of features for a professional experience when serving beverages at home.

Get up to 2 kegs on tap and save space as well as cooling times! 

The Kegmaster Premium can store up to 4 x 19 L ‘Corny’ kegs giving you the option of conditioning 2 kegs while serving from 2. Alternatively, the Kegmaster Premium XL can fit 2 x 20 L PET Kegs + 1 x 19 L ‘Corny’ keg, 3 x 20 L SS Commercial Kegs, or 1 x 50 L SS Commercial Keg.

The internal volume has increased from previous versions to an impressive 160 L capacity while keeping the kegerator compact enough to fit in typical ‘kegerator-size’ spaces. 

The Kegmaster Premium XL also includes the UltraTap for laminar flow and the perfect pour! Also includes are built-in, low-profile rollers so you can easily move your kegerator in position and a gas cylinder bracket that can be installed at the back for efficient storage of your CO2 cylinder.

With a preassembled font and gas line, there is minimal assembly required, meaning you can get round to serving your beer or other carbonated beverage quickly and with ease. 

Features:

• Built in rollers for easy moving – removeable and upgradeable to castors.
• Reversible Door – orient to open how you like.
• Font Fan with speed control – keeps your font cold and runs more quietly.
• Internal light – handy for inspecting keg connections.
• Suitable for free standing installations – can also be installed under counters.
• R600a Refrigerant – environmentally 

The kegerator is easy to set up and you only need to add a C02 Cylinder, pop in some kegs and you're good to go.

What's Included

• Kegmaster Premium XL Kegerator
• 2 x 19 L ‘Corny’ Kegs
• Preassembled 2-tap font and gas line
• MKX Regulator

Specifications

Height: 850 mm with rollers 830 mm without rollers 890 mm with castors
Width: 610 mm
Depth: 660 mm
Internal Height: 724.9 mm
Internal Width: 511.9 mm
Internal Depth: 405.1 mm
Volume: 160 L
Weight: 43 Kg
Power: 220-240V 50Hz
Climate Class: T
Refrigerant: R600a (40g)
Insulation: Cyclopentane
Packaged dimensions: H 88 cm W 66 cm D 69 cm

This Still Spirits Black Plastic Bottle Cap is threaded and screws straight on to both plastic spirit bottles and standard glass spirit bottles. This cap contains an induction wad which is used to secure bottles and preserve the contents from contaminants like microbes, moisture, and pollutants.

The cap measures 30mm x 35mm. 1 x Black Plastic Bottle Cap included. 

A solid bung with a diameter of 46mm across the top, tapering to a diameter of 38mm across the bottom.

Fits the 5L Glass Jar Demijohn with Screw Cap/Lid perfectly.

Jazz up your Kegerator or commercial beverage dispensary with these stylish decal holders. Made from plated chrome plastic, with soft padding components as to not scratch your taps when attached are surely there to catch your eye.

These decal holders will fit any tap system. Their unique clamp on design means you don't have to take off your tap to put these on. You will need a phillips head screw driver to remove the two screws.

As the name says, this will fit a 82mm Diameter Decal/Sticker/Label.

From: Kegland

Shake well. Add 28 ml of flavour concentrate to 2.25 litres of 40% ABV (80 proof) neutral spirit or vodka. Flavour improves after seven days.

Shake well. Add 28 ml of flavour concentrate to 2.25 litres of 40% ABV (80 proof) neutral spirit or vodka. Flavour improves after seven days.

Shake well. Add 28 ml of flavour concentrate to 2.25 litres of 40% ABV (80 proof) neutral spirit or vodka. Flavour improves after seven days.

Shake well. Add 28 ml of flavour concentrate to 2.25 litres of 40% ABV (80 proof) neutral spirit or vodka. Flavour improves after seven days.

These 0.2 micron Air Filters have a fine enough filter membrane that they can filter out microbes and bacteria.

They can be used with any oil free air compressor such as a pond pump, or other type of pump.

These can also be used as an airlock in the top of your fermenter, or to filter air going back into a cask when dispensing real ale. 

This filter is not suitable for liquids and should be discarded if it gets wet.

Barb diameter measures approximately 9mm - 9.5mm.