Sort by:
Duotight - 9.5mm (3/8”) Female x ½" Male Thread Ball Valve.
It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
Note: colour may vary.
From: Kegland
Duotight - 9.5mm (3/8”) Female x 1/2 Male Thread.
It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
Note: colour may vary.
From: Kegland
Made of highly accurate sensors, the 40kg Home Brew Digital Scale is your best companion prior to your brew day routine. Don't take the small kitchen scales that are hard to read with a giant bucket on it. Get yourself some serious scales for some serious business!
It runs on a rechargeable battery which means you can use it anywhere you like. The battery is fully charged within 2 hours and can run up to 140 hours just from a single charge.
NOTE: All scales used for commercial purposes are required to be calibrated.
Over charging for more than 2 hours can lead to battery failure, whereby the unit would have to be wired to turn on.
Specifications:
- Power: AC or rechargeable battery
- Voltage: 220v 50Hz/60Hz
- Battery required: 4V 6AH recharge battery
- Capacity: 40kg
- Increment: 1g
- Precision: 1/3000F.S
- Display windows: Weight (5 digits), Unit price (5 digits), Total Price (6 digits)
- Platform size: 33.5x23.5cm
- Product size: 34x33x8cm
- Colour: Black (unbranded)
- Battery: 4v Lead Acid Battery (Charge for two hours at a time, do not over charge)
From: Kegland
A fresh fruit flavour to turn standard vodka into something very special. Ideal for cocktail mixes, or alcohol free mixed with lemonade or over ice cream
Add to 1 litre of spirit or vodka to make a delicious Nitro Fruit Vodka.
Ingredients: Natural Fruit Extracts, Sugar, Glucose, Citric Acid, Preservative (202,211)
Manufactured in Auckland, New Zealand
Turn your vodka into a vibrant passionfruit fruit vodka with Spirits Unlimited Passionfruit Fruit Vodka!
Bright, tropical passionfruit character with a smooth, clean finish, perfect for mixing with soda, lemonade, or using as a cocktail base.
Turn your vodka into a bold blood orange fruit vodka with Spirits Unlimited Blood Orange Fruit Vodka!
Rich citrus flavour with subtle bitterness and a smooth, clean finish, perfect for mixing with soda, lemonade, or using as a cocktail base.
Turn your vodka into a refreshing coconut lime vodka with Spirits Unlimited Coconut Lime Fruit Vodka!
Smooth coconut notes balanced with zesty lime, delivering a clean, tropical finish that’s perfect for mixing with soda, lemonade, or using as a cocktail base.
Turn your vodka into a vibrant fruit punch vodka with Spirits Unlimited Fruit Punch Fruit Vodka!
A bold blend of orange, grape and strawberry flavours with a smooth, clean finish, perfect for mixing with soda, lemonade, or using as a cocktail base.
Did someone say Mojito?
These classic mint and lime flavoured vodkas have never been easier to make at home. Spirits Unlimited Mojito Fruit Vodka delivers a fresh, zesty profile with cooling mint notes – just top it up with vodka or neutral spirit.
Turn your vodka into a crisp apple fruit vodka with Spirits Unlimited Apple Fruit Vodka!
Fresh apple character with a smooth, clean finish, perfect for mixing with soda, lemonade, or using as a cocktail base.
Low Volume CIP Spinning Spray Rotor (stainless swivel nut and barb).
Introducing the new Low Volume CIP Spray motor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day.
- Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units)
What can it do?
Clean In Place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to.
Specifications
1 x Custom molded rotating spray head with 1/2" BSP thread
1 x 300mm length silicon tubing suitable for your BrewZilla recirculation arm
1 x Stainless nut and barb
Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down.
From: Kegland
Now updated with the all new duotight 8mm Ball Lock Disconnect (Grey+Red/Gas)
This kit has been designed for simplicity and ease of putting together.
This Kit Contains:
1 x BlowTie Spunding Valve Gen 2 with 0-15psi Integrated Gauge
1 x Duotight 8mm (5/16") x Ball Lock Disconnect (Grey+ Red/Gas)
1 x Rigid 8mm Plastic Joiner
All new compact BlowTie Spunding Valve Gen2 Integrated Kit. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.
This BlowTie unit can be easily disassembled for cleaning using a Phillips head screw driver.
Designed to suit 8mm OD (5/16") Evabarrier Tubing.
Specifications:
1. Suits pressures 0-15psi (but with different gauges the unit can go above 100psi)
2. Made from food-grade acetal
3. Stainless screws
4. 8mm (5/16") push on both sides
If you are looking for a compact digital gauge with backlight illumination click here. This should only be used on a blowtie if you have excess tubing to stop liquid reaching the gauge. If liquid enters the digital gauge it will break.
Turn your vodka into a crisp rhubarb fruit vodka with Spirits Unlimited Rhubarb Fruit Vodka!
Tart, lightly sweet rhubarb character with a smooth, clean finish, perfect for mixing with soda, lemonade, or using as a cocktail base.
Turn your vodka into a refreshing raspberry lemonade vodka with Spirits Unlimited Raspberry Lemonade Fruit Vodka!
Bright raspberry flavour balanced with zesty lemon, delivering a smooth, clean finish that’s perfect for mixing with soda or serving over ice.
Turn your vodka into a bold chilli lime vodka with Spirits Unlimited Chilli Lime Vodka!
Zesty lime flavour paired with a warming chilli kick and a smooth, clean finish, perfect for mixing with soda or using as a cocktail base.
Turn your vodka into a bold chilli vodka with Spirits Unlimited Chilli Vodka!
A warming chilli kick balanced with a smooth, clean finish, perfect for mixing with soda, citrus mixers, or using as a cocktail base.
Turn your vodka into a smooth dragonfruit fruit vodka with Spirits Unlimited Dragonfruit Fruit Vodka!
Light, subtly sweet dragonfruit flavour with a clean, refreshing finish, perfect for mixing with soda, lemonade, or using as a cocktail base.
A very smooth pale colourd rum with light sugarcane flavour
125ml flavours 2 litres
Mix with 40% spirit or vodka. Bottle age for 14 days
Pour over ice to enjoy full flavour
Ingredients: Water. Natural Flavour, Sugar, Caramel, Stabiliser (211)
Manufactured in Auckland NZ
Distinctive navy style, full syrup and blackstrap molasses with a straight from the barrel flavour
125ml bottle flavours 2 litres
Mix with 40% spirit or vodka. Bottle age for 14 days.
Pour over ice to enjoy full flavour
Ingredients: Water, Natural Flovour, Sugar, Caramel, Stabiliser (211)
Manufactured in Auckland NZ
The very essence of all gins
Juniper berries form the base of all gin botanical mixes. Use for macerating in spirit or in a suitable gin basket along with your own botanicals to create you own unique botanical mix.
A premium mix of botanicals to craft a gin with fresh bright citrus notes, a lively juniper character, and an elegant light spicy finish. Will produce a gin similar to Bombay Sapphire Blue Gin.
Instructions:
• Pour approximately one tenth of the larger botanicals into 2.5 Litres of spirit,
leave to soak for up to 24 hours
• Add the flavoured spirit to the boiler, straining out botanicals and top up
with water
• Add the remaining botanicals into a Pure Distilling Gin Basket and attach
to condenser
• Run distillation, extracting approximately 2.25L @ 40% ABV
A premium mix of botanicals to craft a Dutch Style Gin.
Instructions:
• Pour one third of the botanicals into 2.5 Litres of spirit, leave to soak for up to
24 hours
• Add the flavoured spirit to the boiler, straining out botanicals and top up
with water
• Add the remaining botanicals into a Pure Distilling Gin Basket and attach
to condenser
• Run distillation, extracting approximately 2.25L @ 40% ABV
Make your own authentic premium Gins! Our thoughtfully curated botanical packs are designed to replicate the distinct flavours of popular gin styles. Ideal for use with a gin basket to craft top-quality gins, mimicking the procedure used in commercial distilleries.
London Dry Gin will produce a traditional dry gin flavour, similar to Gordon’s London Dry Gin
Instructions:
- Pour approx. one-third of the botanicals into 2.5L of ~40% ABV spirit and allow them to soak for up to 24 hours. (Note: Soaking in higher-strength spirit, such as 90+% ABV, can extract harsh or off-flavours from the botanicals, so it’s important to stick to ~40%.)
- After soaking, strain out the botanicals and pour the flavoured spirit into your boiler. Top up with cold water to the MAX fill line.
- Place the remaining botanicals into a gin basket and attach it to your condenser.
- Begin distillation. You should collect approximately 2.25L at an average strength of ~40% ABV. The spirit will initially come off at around 70–75% ABV, gradually decreasing as the run progresses. The main “hearts” cut typically comes off between 30–50% ABV. Stop collecting once the boiler temperature reaches 98°C.
Note: We reference ~40% ABV here because if all collected distillate was combined in one jug, the overall average strength would be close to 40%. However, we recommend collecting in separate fractions—heads, hearts, and tails—to allow for better control over flavour and quality.
A blend of Juniper Berries and traditional botanicals to make a basic
Gin base, perfect for you to add your own distinct touch to!
Instructions:
• Pour one third of the botanicals into 2.5 Litres of spirit, leave to soak for up to
24 hours
• Add the flavoured spirit to the boiler, straining out botanicals and top up
with water
• Add the remaining botanicals and your own flavour selection into a
Pure Distilling Gin Basket and attach to condenser
• Run distillation, extracting approximately 2.25L @ 40% ABV
A 2" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 1.5" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 2 inch silicone tri-clover/tri-clamp seal.
A 1.5 inch silicone tri-clover/tri-clamp seal.
A 2 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 2 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 2 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
