This unit has been designed to fit Kegland standard Single, Double and Triple Tap Kegland Kegerator Towers or any other 76mm diameter font. 

Keep your beer icy-cold with this insulated tower/font cover right out of the first drop. Most kegerators that we sell include a font fan that blows cold fridge air up the font. With that said heat loss from the stainless font surface causes the font temperature to rise meaning that a small amount of beer contributes to the "first pour foam effect".

These extra thick covers are made from 7mm neoprene, meaning your beer will stay cold even if the hot sun is beating down directly on the font.

This helps save power as your fridge will not be working as hard, and you pay less in power. So this thing practically pays for itself!

How to Install

1. Remove taps from the font. (no need to remove the shank from the font, just the taps).

2. Pull the insulated cooler down over the font.

3. Mark the tap holes and use a sharp pair of scissors to cut a hole in the neoprene jacket.

4. Re-attach the taps.

NOTE: Nail cutting scissors are particularly good for this application, or a 5/8" Hole Punch.

Please note these only come with a Kegland logo. They are not sold in plain black.

From: Kegland

Saniclean is a low-foaming, acid based, final rinse sanitiser.

• Effectively removes odours and flavours especially from draft lines or other dispensing products.
• Great for both CIP and manual applications.
• Not to be used on soft metals such as aluminium.

Instructions:

• Thoroughly clean surfaces with PBW or compatible cleaner.
• Mix 2 oz. (60ml) Saniclean for every 5 gal. (19L) of water. (Will be low-foaming)
• Apply on surface with cloth, mop, sponge, spray, or immersion.
• If using spray application, use a coarse mist, pump, or trigger sprayer and spray 15-20cm from surface and follow up with a brush or sponge.
• Allow for contact time of at least 2-3 minutes.
• Drain, but do not rinse.

From: Five Star Chemicals

PBW is an alkaline, non-caustic, environmentally and user friendly cleaner. This is the liquid product - we also have the dry powder and tablet form.

PBW is a buffered alkaline detergent that has been proven to be more than an effective substitute for caustic soda cleaners. Because of its unique formulation of buffers and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminium, and on plastics. P.B.W. uses active oxygen to penetrate carbon or protein soils and is not effected by hard water.

PBW has been formulated as a C.I.P. cleaner and is very effective in removing protein soils found on brew kettles, fermenters, conditioning tanks, filters and all packaging areas. The concentrations to remove these soils are typically in the 1% range. However, due to soil and water conditions this concentration will vary. To help in hard water areas PBW has been formulated with enough chelators to tolerate hard water over 17 grains.

PBW is an excellent choice as a soak cleaner because it does not require excessive heat as do most caustic based cleaners. This product has cleaned brass and copper filters, and industrial aluminium surfaces successfully.

Benefits
- Replaces Caustic Soda cleaners
- Effective at All Temperatures
- Free Rinsing
- Safe on Polycarbonate surfaces
- Safe to handle - Generates 4
- 5% Oxygen
- Non-hazardous & Non-corrosive
- Excellent hard water tolerance
- Removes protein soil and staining, baked on carbon, and fatty acids

Liquid PBW Highlights:

• Mixes into solution even at lower water temperatures
• Removes tough stains and soils with less scrubbing
• Quickly mixes into solution
• Can be used for a wide range of applications, but is especially effective with canning lines and keg cleaners
• 1-2 oz. (30-60ml) per gallon of water

Manufacturer: Five Star Chemicals
Country: USA

Powdered Brewery Wash is an alkaline, non-caustic, environmentally and user friendly cleaner. This is the tablet product - we also have the dry powder and liquid form.

PBW is a buffered alkaline detergent that has been proven to be more than an effective substitute for caustic soda cleaners. Because of its unique formulation of buffers and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminium, and on plastics. P.B.W. uses active oxygen to penetrate carbon or protein soils and is not effected by hard water.

PBW has been formulated as a C.I.P. cleaner and is very effective in removing protein soils found on brew kettles, fermenters, conditioning tanks, filters and all packaging areas. The concentrations to remove these soils are typically in the 1% range. However, due to soil and water conditions this concentration will vary. To help in hard water areas PBW has been formulated with enough chelators to tolerate hard water over 17 grains.

PBW is an excellent choice as a soak cleaner because it does not require excessive heat as do most caustic based cleaners. This product has cleaned brass and copper filters, and industrial aluminium surfaces successfully.

Benefits
- Replaces Caustic Soda cleaners
- Effective at All Temperatures
- Free Rinsing
- Safe on Polycarbonate surfaces
- Safe to handle - Generates 4
- 5% Oxygen
- Non-hazardous & Non-corrosive
- Excellent hard water tolerance
- Removes protein soil and staining, baked on carbon, and fatty acids

Tablet PBW Highlights

• Easy Dosing - 1 tablet for every 32 oz (approx. 1 litre) of water for 2.5 g cleaning tablet, or 1 tablet for every gallon (approx. 4 litres) of water for 10g cleaning tablets
• Removes Stubborn Stains - Tackle organic materials and stains with this non-caustic, alkaline based cleaner
• Versatile Applications - This tablet can be used to clean all types of equipment. Great for carboys, kettles, growlers, kegs, spray bottles, and so much more
• Wide Temperature Range - Has the cleaning power to work at low and high temperatures
• Effective in Hard and Soft Water - Specifically formulated for brewing, this a robust cleaning ability is a variety of environments

Manufacturer: Five Star Chemicals
Country: USA

Short Shank - Stainless Steel (Duotight compatible).

A 1/2 inch ball valve assembly with a maximum operating temperature of 200℃ consisting of:

• 316 Stainless Steel 1/2 inch hex nipple
• 316 Stainless Steel 1/2 inch 2pc ball valve
• 316 Stainless Steel 1/2 inch male hosetail

Perfectly suited for use with the G70 and G40 to allow quick drainage from the bottom of the unit.

We recommend using thread tape to ensure a complete and leak proof seal. 

For use with the G70 and G40 to allow quick drainage from the bottom of the unit. Made with high temperature resistant 304 grade stainless steel, the faucet’s operating temperature ranges from -10°C to 150°C.

Alternatively you could use the Ball Valve Assembly 316 Stainless Steel - 1/2 Inch.

LalBrew Farmhouse™ is a non-diastatic hybrid that has been selected to make saison-style and farmhouse style beers. This product is the result of the research and development work of Renaissance Yeast in Vancouver BC, Canada. LalBrew Farmhouse™ was selected using the most advanced breeding techniques. The Renaissance research team used classical and non-GMO methods to remove the STA1 gene, responsible for the diastatic activity of Saison yeasts. Care was taken to retain normal brewing sugar utilisation to produce dry saisons. Additionally, the patented technology from University of California Davis (USA) ensures that the strain will not produce sulphurous favours, therefore enhancing the saison yeast aroma characteristics.

Click here to download the technical data sheet. 

Click here for the Lallemand Pitch Rate Calculator to calculate the amount of yeast you need.

A bored silicone bung for the Grainfather GF30 and SF70.

Measures approximately 41mm across the top, tapering to approximately 35mm across the bottom.

For the perfect pour, every pour, you need Ultratap.

From the inventor for the original Ventmatic (Intertap) range of tap products comes the next generation design technology that will provide you with the ultimate laminar flow experience to date.

Ultratap is the best way for your friends and customers to see your beverages being served with the most "wow factor". This tap dispenses a truly stunning pour with ease.

Ultratap’s patented all stainless steel construction utilizes 21^st century, laser-precision manufacturing techniques ensure your beer meets the glass in perfect condition, every time.

Ultratap’s strength is in its simplicity. It has fewer parts and a solid, all stainless steel construction, compared to other forward sealing taps.

The secret lies within Ultratap’s unique internal surface which minimises micro eddies in the flow of the liquids with dissolved gasses before it reaches the atmosphere, gliding perfectly into your glass.

Ultratap’s forward sealing function keeps your beer fresher and will not leave a residue that will affect the tap’s performance.

For the true laminar experience look for Ultratap wherever great beer flows.

Includes a free black slender tap handle.

Note: This item is the tap & handle only.

This Tap to Keg Adapter and Coupling Nut will allow you to add a beer dispensing tap directly to your keg. Includes both adapter and faucet coupling nut.

Requires an MFL keg connector and beer tap, not included.

CM Becker are high quality disconnects made in Germany and assembled in  the USA. They are:

• NSF approved, 
• use FDA approved materials,
• and have SK approved materials(European).

This is a gas disconnect for a Cornelius or Firestone ball lock keg with a 1/4 inch MFL connection. Can be used in conjunction with a Barbed Swivel Nut - 1/4 inch or Duotight 8mm - MFL Connector. 

CM Becker are high quality disconnects made in Germany and assembled in  the USA. They are:

• NSF approved, 
• use FDA approved materials,
• and have SK approved materials(European).

This is a liquid disconnect for a Cornelius or Firestone ball lock keg with a 1/4 inch MFL connection. Can be used in conjunction with a Barbed Swivel Nut - 1/4 inch or Duotight 8mm - MFL Connector. 

The ATF Juicy As lives up to its name. Hopped with over 7g/L in the whirlpool and over 12g/L in the the dry hop it is bursting tropical fruit and citrus aroma’s with a slightly zingy full juiciness and a nice balancing bitterness on a soft malt base.

Yeast is not included in the kit. We recommend using Froth Vape (Assumed Origin: Boddington’s) to produce a juicy hazy with a silky mouthfeel and great hop aroma and flavour.

Alternatively we recommend using Verdant IPA. Lallemand’s Verdant IPA yeast. LalBrew Verdant IPA yeast will produce fruity esters and is well suited to NEIPA’s. Verdant IPA yeast expresses high amounts of β-lyase enzyme promoting biotransformation accentuating hop flavour and aroma. and also produces high amounts of glycerol producing a beer with a silky mouthfeel.

You could also try Froth Spectra (Assumed Origin: Unknown (London)).Spectra can produce a spectrum of radiant flavour & aroma while exhibiting an elegant ester profile and velvety mouthfeel.

Alternatively you could use Lallemand's New England yeast. Lallemand New England produces beers with a unique fruit forward ester profile, which is sought after in NEIPA's. Through expression of a β-glucosidase enzyme, LalBrew® New England can promote hop biotransformation and accentuate hop flavour and aroma.

Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.

The ATF Juicy As lives up to its name. Hopped with over 7g/L in the whirlpool and over 12g/L in the the dry hop it is bursting tropical fruit and citrus aroma’s with a slightly zingy full juiciness and a nice balancing bitterness on a soft malt base.

Yeast is not included in the kit. We recommend using Froth Vape (Assumed Origin: Boddington’s) to produce a juicy hazy with a silky mouthfeel and great hop aroma and flavour.

Alternatively we recommend using Verdant IPA. Lallemand’s Verdant IPA yeast. LalBrew Verdant IPA yeast will produce fruity esters and is well suited to NEIPA’s. Verdant IPA yeast expresses high amounts of β-lyase enzyme promoting biotransformation accentuating hop flavour and aroma. and also produces high amounts of glycerol producing a beer with a silky mouthfeel.

You could also try Froth Spectra (Assumed Origin: Unknown (London)).Spectra can produce a spectrum of radiant flavour & aroma while exhibiting an elegant ester profile and velvety mouthfeel.

Alternatively you could use Lallemand's New England yeast. Lallemand New England produces beers with a unique fruit forward ester profile, which is sought after in NEIPA's. Through expression of a β-glucosidase enzyme, LalBrew® New England can promote hop biotransformation and accentuate hop flavour and aroma.

Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.

Using only the barrel stave component from quality distilleries' genuine bourbon barrels which consist of deeply charred 100% American oak, these oak chips impart a complex oak flavour profile to produce the ultimate bourbon experience.

Temp Twister Pump Kit with Return Line and Clamp.

If a glycol chiller is a bit out of reach at the moment, but you want to use the Temp Twister in your Kegmenter or FermZilla, this little product can help you on your way to cool your fermenter. Simply submerge the pump in a large bucket with water and ice.

The more insulation you give your fermenter and keep it at a relatively stable temperature the better. We suggest using this in conjunction with a temperature controller.

Parts List:
1 x 1.2m Length of Insulated 6mm x 9mm EVABarrier Hose
1 x 1.2m Length of 6mm x 9.5mm hose (return line back to the bucket) (colour may vary)
2 x 9.5mm duotight Elbows (For temp twister)
1 x Temp Twister 12v Pump and power supply

From: Kegland

This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Temp Controller.

This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

From: Kegland

Duotight 8mm x Ball Lock Disconnect (Grey + Red/Gas)

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean.

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

This particular ball lock disconnect has been designed to suit 8mm outside diameter beer/gas line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

Some of the features include:

1. Duotight push in
   These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
   
   
2. Compact
   The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
   
   
3. Overmoulded Poppet
   The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
   
   
4. Tool-less Disassembly
   Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
   
   
5. Extreme Chemical Resistance
   No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet.  This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
   
   
6. Toughness
   This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
   
   
7. High Flow
   The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

From: Kegland

Duotight 8mm x Ball Lock Disconnect (Black + Yellow/Liquid).

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

This particular ball lock disconnect has been designed to suit 8mm outside diameter beer/gas line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

Some of the features include:

1. Duotight push in
   These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
   
   
2. Compact
   The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
   
   
3. Overmolded Poppet
   The overmolded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
   
   
4. Tool-less Disassembly
   Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
   
   
5. Extreme Chemical Resistance
   No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmolded poppet.  This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
   
   
6. Toughness
   This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
   
   
7. High Flow
   The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

From: Kegland

D-Type Keg Coupler - Full Stainless - with Duotight 5/8" to 8mm push fit fittings.

Includes:
1 x - D-Type Coupler with 5/8" Male Beer and Gas threads
2 x - duotight 5/8" duotight to 8mm push in
1 x - Non-Return Ball or Torpedo check piece (Non-Return Liquid)
1 x - Gas Duck Bill valve (Non-Return Gas)

How to install Gas Duck Bill Valve
Remove black EPDM washer inside 1 of the duotight push in fittings that you will use for gas. The duck bill valve is a washer as well as a non-return check piece. It is optional, you do not have to use the non-return check pieces for gas or liquid.

From: Kegland

This digital turbo boiler is a quality made 304 grade stainless steel turbo boiler.

The 65 Litre size is the total rated size brimful, so typically if you are using this as a beer boiler you would probably only fill it up to 50-60L so you had 5-10 litres of head space to boil comfortably.

The boiler has a quality made stainless tap with stainless barb and 1/2inch thread so you can attach the wide range of other half inch fittings such as camlocks and many other fittings that we can supply.

The unit comes with a concealed element for easy cleaning.

The digital display can be set from 0℃ and up to 140℃ with 1℃ increments and 1℃ resolution on the display.

The side of the boiler is pre-marked with graduations in litres and gallons that are accurate to +/- 1 litre.

- Litre and Gallon Graduations
- Stainless steel tap with barb and 1/2 thread
- Triple element control (so you can adjust the power from 500watts, 1000watts, 1500watts, 2000watts, 2500watts, 3000watts and 3500watts! )
- Easy to use
- Great for use as a hot liquor tank, boiler, or hot water urn
- Concealed element for easy cleaning
- Can also be used for sous vide cooking

Dimensions: 42cm diameter x 74cm high

You can also purchase the neoprene jacket/parka that fits this unit here. This will reduce your heat loss by about 200-300 watts.

Note: Out of the box this unit needs a 15amp power socket.  With that said you can convert this to a 10amp compatible device in two different ways.  You can either:

1. Purchase a device like an Ampfibian Mini 15amp to 10amp adaptor.  If you do this you will be able to run the Digiboil, however if you turn on all three elements you will trip the circuit breaker.  For this reason you will only be able to use a maximum of 2 of the elements. (not all three)

2. Alternatively you can remove the cord and replace the cord on this device with a 10amp cord, but if you do this you will need to disconnect the larger element resulting in 1300watts less power.

Carbonate and serve from your Mangrove Jack's Mini Keg with the Ball Lock Cap. Suitable for the 10L Mini Keg.

The ATF Extract Recipe - Mean As Juicy IPA has an amazing and complex flavour profile of tropical passionfruit, citrus, gooseberry, melon, and floral rose petal with a full soft malt background. 

This kit includes hops that require steeping, as well as multiple dry hop additions. A total of 240g of hops.

Yeast is not included in the kit. We recommend using one packet of Lallemand Verdant IPA yeast. Alternatively you could use Lallemand New England Yeast, Mangrove Jack's Hophead Ale (which is a blend of yeast and β-glucosidase enzyme), Mangrove Jack's Liberty Bell yeast, or Fermentis SafAle S-04.

The Details

* Be prepared for a large krausen.

 Kit Includes

• Muntons Maris Otter Liquid Malt Extract
  
• Muntons Wheat Liquid Malt Extract
  
• Muntons Oat Liquid Malt Extract
• Simcoe, Mosaic, & Citra hop pellets - 240g (in three vacuum sealed foil bags; one for steeping & two for dry hopping)

Additional Equipment Needed

• Stainless steel pot large enough to comfortably hold 10 litres.
  
• Stainless steel spoon to stir wort.
• Thermometer

Stainless Steel beer disconnect with MFL fitting for ball lock corny kegs.

Made from 304 grade stainless steel, these keg connectors are extremely reliable and robust.

From: Kegland

Stainless Steel gas disconnect with MFL fitting for ball lock corny kegs.

Made from 304 grade stainless steel, these keg connectors are extremely reliable and robust.

From: Kegland

Seal Kit for both the Ball Lock and Pin Lock type Cornelius kegs.

Includes:

• 1 x Low2 Hatch/Keg Lid O-Ring (Yellow)
• 2 x Keg post o-rings
• 2 x Dip tube o-rings

What is Low2?
Low2 O-Rings are the new golden yellow standard of homebrew keg parts from Kegland. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.

From: Kegland

The Air Still Carbon Filter & Collection System is a simple container filter that uses a carbon cartridge to remove impurities from distillate. It is designed to filter smaller batches of spirit as produced with an Air Still or Air Still Pro.

Air Still Carbon Filter & Collection System includes:

• Carbon Cartridge
• Filter Holder
• Distillate Catcher
• Filter Container
• Filter Lid
• Clear Spindle
• Filter Bottom Cap
• Washer
  

The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation

It provides an accurate reading in both Celsius and Fahrenheit. 

The Grainfather Thermowell consists of a tube closed at one end which can be fitted to a fermenter and allows for the Grainfather Fermentation Thermometer, or the GCA temperature probe to be inserted.

The Thermowell is fixed to the fermenter so that the closed tube is surrounded by the fermenter contents. The thermometer or temperature probe can then be inserted to can read the temperature accurately, without touching the liquid. 

A 14mm hole in the fermenter is required for installation. The Thermowell is also a spare part for the SF70.

Includes:

• Thermowell
• Nut
• O-ring

A hole plug fitting for plugging 17mm holes.

- 304 Stainless Steel
- Includes o-ring for leak-proof seal
- Includes spare o-ring

Ideal for plugging holes from these fittings:
- Brew Bucket ball valve
- Bucket / Chronical thermowell
- Brewmaster Edition Chronical FTSs chiller coil holes
- FTSs lid holes

From: Ss Brewtech

NukaTap Flow Control Auto Close Spring.

The NukaTap Flow Control is the world's only forward sealing flow control tap that can use a auto close spring. By inserting the spring between the flow control device and NukaTap shuttle the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around!

This very inexpensive spring can save you from emptying an entire keg and then loosing a whole bottle of gas.

Note: The spring is not compatible with the NukaTap Standard Models, the auto close spring for those can be purchased here.

From: Kegland

This Hop Tube is made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your RoboBrew / BrewZilla without blocking the pump. It can also be used in your Brewhouse Kettle/Boiler, 19L corny keg, and the FermZilla.

It cannot fit in a standard 50L Keg as the opening is not wide enough. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel. 

Diameter: approx. 66mm Heigh: approx. 300 mm.

From: Kegland