If you want a clean, pure, high-proof alcohol that serves as a neutral canvas, a reflux still is the way to go. Because the reflux process strips away the vast majority of flavour compounds and impurities, the resulting neutral spirit has very little character of its own. Critically, this means it requires no long-term aging (although it may soften a little with a short period of conditioning).
Once collected and diluted to drinking strength, it is ready to be transformed using spirit flavourings, fruits, or botanical infusions to create a wide range of products—such as gin, liqueurs, or flavoured vodkas. These can often be prepared and ready for consumption in just a few days or weeks, offering a much faster path to a drinkable product compared to the extended barrel-aging required for pot-distilled spirits.
Sort by:
The Pure Distilling 30L Boiler with lid (60cm diameter hole).
Feayures:
- Easy to Fill Volume Scale
- Automatic Reset Boil Dry Protection
- Dual element control ( two concealed elements (500w & 1700w total 2200w))
- Full Detailed Instructions
The Pure Distilling 30L Boiler lid with 60mm diameter hole.
Fits any boiler with a 310mm - 312mm diameter (such as the T500 boiler).
The Pure Distilling 1.5" Copper Bubble Plate is designed to be inserted into a 1.5" sight glass using a specially designed 1.5" Bubble Plate Seal (sold separately).
Bubble Plates are designed to promote reflux and provide visual feedback of the distillation process*.
*Results may vary, depending on your individual set-up.
KEY FEATURES
- Designed to be inserted into 1.5" sight glass
- Connects to 1.5" tri-clamp distilling accessories
WHATS INCLUDED
- Copper Bubble Plate
The Pure Distilling 2" Copper Bubble Plate is designed to be inserted into a 2" sight glass using a specially designed 2" Bubble Plate Seal (sold separately).
Bubble Plates are designed to promote reflux and provide visual feedback of the distillation process*.
*Results may vary, depending on your individual set-up.
KEY FEATURES
- Designed to be inserted into 2" sight glass
- Connects to 2" tri-clamp distilling accessories
WHATS INCLUDED
- Copper Bubble Plate
The Pure Distilling 4" Copper Bubble Plate is designed to be inserted into a 4" sight glass using a specially designed 4" Bubble Plate Seal (sold separately).
Bubble Plates are designed to promote reflux and provide visual feedback of the distillation process*.
*Results may vary, depending on your individual set-up.
KEY FEATURES
- Designed to be inserted into 4" sight glass
- Connects to 4" tri-clamp distilling accessories
WHATS INCLUDED
- Copper Bubble Plate
Introducing the Pure Distilling Distillery Deluxe Kit with Liquid Management Reflux Condenser & Pot Still Condenser
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
With its easy to use operation, amazing features, and rock-solid reliability, the Reflux Condenser is the foundation of Pure Distilling. Whether you’re assembling the whole unit in under a minute, or watching your bottles fill with commercially quality alcohol – it is simple, easy and fun to use.
Effortless Operation
From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you. All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
Set the water flow once, and simply check ONE thermometer to see when the process is complete.
Amazing Features
93% alcohol and 97% yield
Fast — Makes 13 bottles in about 4 hours.
Pure — Delivers great tasting 93% alcohol with smooth flavour.
Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.
Fits a lid with a 60cm diameter hole.
Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.
The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.
Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.
5 Year Warranty
Problems? No problem! If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty? Simply put – quality. We use only solid copper and brass, have no breakable plastic parts, and an elegant design.
Australian Owned and Manufactured
All our condensers are 100% Australian made, and our company is 100% Australian owned.
Includes
- Pure Distilling Reflux Condenser with high yield output tap
- Pure Distilling Pot Condenser with thermometer
- Pure Distilling Boiler Lid. Fits any boiler with a 310mm - 312mm diameter (such as the T500 boiler).
- 3 x Plastic Hose Connectors
- 4m of 12.5mm Clear Vinyl Tubing
- Smart Filter with stainless spindle, clever stainless plug and filter cartridge
- Premium Spirit Yeast, Crystal Clear, Spirit Enhancer & Distilling Conditioner
- 30L pail fermenter with tap, grommet, airlock, and stick on thermometer
- 60cm Stirring Paddle
- Distilling Thermometer with Alarm, Hydrometer and Alcometer
- 5L Pourmaxx measuring jug
- Six Pure Distilling Essences and a 4l Chunk Soaking Pail with 100g samples of Bourbon Barrel Chunks and Whisky Port Barrel Chunks.
This kit does not include a boiler.
Instructions: The Pure Distilling Reflux Condenser Instructions
Introducing the Pure Distilling Distillery Kit with Liquid Management Reflux Condenser
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
With its easy to use operation, amazing features, and rock-solid reliability, the Reflux Condenser is the foundation of Pure Distilling. Whether you’re assembling the whole unit in under a minute, or watching your bottles fill with commercially quality alcohol – it is simple, easy and fun to use.
Effortless Operation
From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you. All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
Set the water flow once, and simply check ONE thermometer to see when the process is complete.
Amazing Features
93% alcohol and 97% yield
Fast — Makes 13 bottles in about 4 hours.
Pure — Delivers great tasting 93% alcohol with smooth flavour.
Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.
Fits a lid with a 60cm diameter hole.
Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.
The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.
Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.
5 Year Warranty
Problems? No problem! If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty? Simply put – quality. We use only solid copper and brass, have no breakable plastic parts, and an elegant design.
Australian Owned and Manufactured
All our condensers are 100% Australian made, and our company is 100% Australian owned.
Includes
- Pure Distilling Reflux Condenser with high yield output tap
- 3 x Plastic Hose Connectors
- 4m of 12.5mm Clear Vinyl Tubing
- Smart Filter with stainless spindle, clever stainless plug and filter cartridge
- Premium Spirit Yeast, Crystal Clear, Spirit Enhancer & Distilling Conditioner
- 30L pail fermenter with tap, grommet, airlock, and stick on thermometer
- 60cm Stirring Paddle
- Distilling Thermometer with Alarm, Hydrometer and Alcometer
- 5L Pourmaxx measuring jug
- Six Pure Distilling Essences and a 4l Chunk Soaking Pail with 100g samples of Bourbon Barrel Chunks and Whisky Port Barrel Chunks.
This kit does not include a boiler, which can be purchased separately.
Instructions: The Pure Distilling Reflux Condenser Instructions
Introducing the Pure Distilling Distillery Upgrade Kit with Liquid Management Reflux Condenser
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
With its easy to use operation, amazing features, and rock-solid reliability, the Reflux Condenser is the foundation of Pure Distilling. Whether you’re assembling the whole unit in under a minute, or watching your bottles fill with commercially quality alcohol – it is simple, easy and fun to use.
Effortless Operation
From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you. All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
Set the water flow once, and simply check ONE thermometer to see when the process is complete.
Amazing Features
93% alcohol and 97% yield
Fast — Makes 13 bottles in about 4 hours.
Pure — Delivers great tasting 93% alcohol with smooth flavour.
Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.
Fits a lid with a 60cm diameter hole.
Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.
The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.
Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.
5 Year Warranty
Problems? No problem! If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty? Simply put – quality. We use only solid copper and brass, have no breakable plastic parts, and an elegant design.
Australian Owned and Manufactured
All our condensers are 100% Australian made, and our company is 100% Australian owned.
Includes
- Pure Distilling Reflux Condenser with high yield output tap
- Pure Distilling Boiler Lid. Fits any boiler with a 310mm - 312mm diameter (such as the T500 boiler).
- 3 x Plastic Hose Connectors
- 4m of 12.5mm Clear Vinyl Tubing
- Smart Filter with stainless spindle, clever stainless plug and filter cartridge
- Premium Spirit Yeast, Crystal Clear, Spirit Enhancer & Distilling Conditioner
- 30L pail fermenter with tap, grommet, airlock, and stick on thermometer
- 60cm Stirring Paddle
- Distilling Thermometer with Alarm, Hydrometer and Alcometer
- 5L Pourmaxx measuring jug
- Six Pure Distilling Essences and a 4l Chunk Soaking Pail with 100g samples of Bourbon Barrel Chunks and Whisky Port Barrel Chunks.
This kit is designed for distillers who already have a boiler (310mm - 312mm in diameter).
Instructions: The Pure Distilling Reflux Condenser Instructions
A stainless steel mesh canister that is 360mm long with a hook to hang from the thermowell inside the Pure Distilling Reflux Condenser . Can hold around 160g of mixed botanicals. Comes with instructions and packaged in a carton with hang tab.
The mesh pieces supplied in this pack have the specifications of all being 30g +/- 1g, to ensure that the correct packing density is achieved in the column. They have been stretched and manipulated to break short strands to ensure even distribution and compaction in the condenser.
The Proofing Parrot Kit is all copper construction with a water cooling coil which brings the output spirit temperature to around 20 degrees, allowing for continuous alchometer readings without having to do corrections. Comes with hoses and connectors and a “perch” to mount the Proofing Parrot Kit onto the boiler. If using an extension or Sightglass mount the perch so it rises or sits up from the boiler, if using just the pot or reflux condenser mount the perch the other way round so it follows the line of the boiler lid, see the photos for examples.
Connect water to the Parrot first, then use the supplied hose and fittings to connect to the pot or reflux condenser. Only insert the alcometer once Parrot is full of spirit, and flowing out the spout.
Introducing the Pure Distilling Liquid Management Reflux Condenser
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
With its easy to use operation, amazing features, and rock-solid reliability, the Reflux Condenser is the foundation of Pure Distilling. Whether you’re assembling the whole unit in under a minute, or watching your bottles fill with commercially quality alcohol – it is simple, easy and fun to use.
Effortless Operation
From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you. All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
Set the water flow once, and simply check ONE thermometer to see when the process is complete.
Add the Pure Distilling Lid to attached the Pure Distilling Reflux Condenser to any boiler with a diameter of 310mm-312mm (such as the T500 boiler).
Amazing Features
93% alcohol and 97% yield
Fast — Makes 13 bottles in about 4 hours.
Pure — Delivers great tasting 93% alcohol with smooth flavour.
Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.
Fits a lid with a 60cm diameter hole.
Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.
The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.
Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.
5 Year Warranty
Problems? No problem! If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty? Simply put – quality. We use only solid copper and brass, have no breakable plastic parts, and an elegant design.
Australian Owned and Manufactured
All our condensers are 100% Australian made, and our company is 100% Australian owned.
Warning
Do not do a vinegar run with the Reflux Condenser as it could damage the seals.
Instructions: The Pure Distilling Reflux Condenser Instructions
Introducing the Pure Distilling Reflux Kit with Liquid Management Reflux Condenser
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
With its easy to use operation, amazing features, and rock-solid reliability, the Reflux Condenser is the foundation of Pure Distilling. Whether you’re assembling the whole unit in under a minute, or watching your bottles fill with commercially quality alcohol – it is simple, easy and fun to use.
Effortless Operation
From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you. All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
Set the water flow once, and simply check ONE thermometer to see when the process is complete.
Amazing Features
93% alcohol and 97% yield
Fast — Makes 13 bottles in about 4 hours.
Pure — Delivers great tasting 93% alcohol with smooth flavour.
Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.
Fits a lid with a 60cm diameter hole.
Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.
The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.
Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.
5 Year Warranty
Problems? No problem! If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty? Simply put – quality. We use only solid copper and brass, have no breakable plastic parts, and an elegant design.
Australian Owned and Manufactured
All our condensers are 100% Australian made, and our company is 100% Australian owned.
Includes
- Pure Distilling Reflux Condenser with high yield output tap
- 3 x Plastic Hose Connectors
- 4m of 12,5mm Clear Vinyl Tubing
- Smart Filter with stainless spindle, clever stainless plug and filter cartridge
- Premium Spirit Yeast, Crystal Clear, Spirit Enhancer & Distilling Conditioner
- 30l Boiler, with dual elements (500w & 1700w), stamped volume gauge and automatic reset on the cut-out protection
- 60cm Stirring Paddle
- Distilling Thermometer with Alarm, Hydrometer and Alcometer
- Six Pure Distilling Essences and a 4l Chunk Soaking Pail with 100g samples of Bourbon Barrel Chunks and Whisky Port Barrel Chunks.
This system is the perfect kit to start distilling, we suggest you purchase a plastic fermenter and accessories for making your wash, we do not recommend using the boiler to ferment your wash as it will shorten the life of the boiler.
Instructions: The Pure Distilling Reflux Condenser Instructions
See the reflux in action with the Pure Distilling Sight Glass
Seamlessly connect our Sight Glass to different distilling systems! Fits directly onto a boiler lid with a 49mm hole.
The Pure Distilling 2″ Sightglass Adaptor kit adds height to your reflux or pot/alembic condenser, allowing you to see the reflux in action whilst simultaneously improving the spirit quality.
The included adapters allow the sight glass to be fitted to systems with 1 1/2 inch fittings such as the T500.
See the reflux in action with the Pure Distilling Sight Glass
The Pure Distilling 2″ Sightglass Adaptor kit adds height to your Pure Distilling reflux or pot/alembic condenser, allowing you to see the reflux in action whilst simultaneously improving the spirit quality.
Features a Brass adaptor to fit straight onto the Pure Distilling boiler lid with 60cm diameter hole.
You can also use the Pure Distilling Sight Glass to adapt the Reflux Gin basket into your Pot condenser for larger batches of Gin!
See the reflux in action with the Pure Distilling Sight Glass
The Pure Distilling 2″ Sightglass Adaptor kit adds height to your Pure Distilling reflux or pot/alembic condenser, allowing you to see the reflux in action whilst simultaneously improving the spirit quality.
Features a high quality copper extension that fits directly onto the Pure Distilling boiler lid with 60cm diameter hole.
You can also use the Pure Distilling Sight Glass to adapt the Reflux Gin basket into your Pot condenser for larger batches of Gin!
A robust thermometer/timer that allows you to set an alarm for a certain temperature.
No more need to watch the thermometer.
This adapter connects the water flow controller to most household outdoor threaded taps and some laundry taps.
The Air Still Pro is a small-batch, 2-in-1 distillation system that allows you to craft high quality light and dark spirits. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode and make flavoursome and botanical-infused spirits at up to 80% ABV in the pot still mode.
An automatic foreshots collection vial captures the first 30 ml of distillate, allowing you to discard foreshots easily. This advanced feature improves safety and saves you extra steps in the process. In addition, other reflux stills may require an input cooling source, such as water, but the Air Still Pro column cools itself.
The Air Still Pro is easy to use and suitable for keen beginners or more advanced distillers looking for a multi-purpose air still. Also available as the Air Still Pro Head Unit to upgrade your Still Spirits Air Still.
You can also purchase the Air Still Pro Complete Distillery Kit, which includes the equipment and ingredients to craft high-quality light and dark spirits along with the Still Spirits Air Still Pro..
Features:
- Capacity: 4L
- Yield: 2.25 L of 40% ABV alcohol per 8L wash
- Pot Still mode: Distills at 80% ABV before diluting to 40% ABV
- Reflux Still mode: Distills at 90% ABV before diluting to 40% ABV
- Dimensions: 42cm (h) x 23cm (w) x 36cm (d)
- Weight: 5.6 kgs
- Power: 220v
- Warranty: 3 years
Included in the box:
- Air Still Pro Head Unit with a pre-packed reflux column
- Air Still Pro Boiler and power cable
- Botanical basket
- 2x glass foreshots collection vials
- Easy-swap distillation tips for reflux and pot still modes
- Distillation tip spanner
- Starter guide
The Air Still Pro Complete Distillery Kit includes the equipment and ingredients to craft high-quality light and dark spirits, plus the Still Spirits Air Still Pro Table-Top Distillation System.
Still Spirits Air Still Pro
The Air Still Pro is a small-batch, 2-in-1 distillation system that allows you to craft high-quality light and dark spirits. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode, and flavoursome and botanical-infused spirits at up to 80% ABV in the pot still mode.
Features
- Capacity: 4L
- Yield: 2.25 L of 40% ABV alcohol per 8L wash
- Pot Still mode: Distills at 80% ABV before diluting to 40% ABV
- Reflux Still mode: Distills at 90% ABV before diluting to 40% ABV
- Dimensions: 42cm (h) x 23cm (w) x 36cm (d)
- Weight: 5.6 kgs
- Power: 220v
- Warranty: 3 years
Also included:
- Air Still Pro Head Unit with a pre-packed reflux column
- Air Still Pro Boiler and power cable
- Botanical basket
- 2x glass foreshots collection vials
- Easy-swap distillation tips for reflux and pot still modes
- Distillation tip spanner
- Starter guide
Air Still Table-Top Distillation System
Everything to prepare and ferment your wash, collect distillate, dilute, filter, and flavour your neutral spirit with a selection of Top Shelf Flavourings.
Equipment
- 12 L (3.2 US Gal) Fermenter with Stick-On Thermometer
- Carbon Filter & Collection System
- Mixing Spoon
- Ceramic Boil Enhancers
- Hydrometer
- Alcometer and Test Tube
Wash Ingredients & Consumables
- 1 x sachet Pure Turbo Yeast Nutrient (78g)
- 1 x sachet Turbo Clear (65g)
- 1 x sachet Turbo Carbon (54g)
- 1 x sachet Pure Turbo Yeast (10g)
- 2 x 1.2 kg Dextrose
- 50 ml Distilling Conditioner
- 3 x 50 ml Top Shelf Flavourings
Upgrade your Still Spirits Air Still with the Air Still Pro Head Unit. Get all the benefits of the Air Still Pro and eliminate the need to purchase a new table-top system.
Craft high quality light and dark spirits using the Air Still Pro Head Unit and your Still Spirits Air Still boiler. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro Head Unit enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode and flavoursome and botanical-infused spirits at up to 80% ABV in the pot still mode.
An automated foreshots collection vial captures the first 30 ml of distillate, allowing you to discard foreshots easily. This advanced feature improves safety and saves extra steps in the distilling process. In addition, other reflux stills may require an input cooling source, such as water, but the Air Still Pro column cools itself.
The Air Still Pro Head Unit is easy to use and compatible with the Still Spirits Air Still Boiler.
Please note: The Air Still Pro Head Unit warranty is void if used with any boiler that is not provided with the Still Spirits Air Still or Air Still Pro.
Features:
- Yield: 2.25 L of 40% ABV alcohol per 8L wash
- Pot Still mode: Distills at 80% ABV before diluting to 40% ABV
- Reflux Still mode: Distills at 90% ABV before diluting to 40% ABV
- Dimensions: 42cm (h) x 21cm (w) x 37cm (d)
- Weight: 3.6kgs
- Power: 220v
- Warranty: 3 years
Included in the box:
- Air Still Pro Head Unit with a pre-packed reflux column
- Botanical basket
- 2x glass foreshots collection vials
- Easy-swap distillation tips for reflux and pot still modes
- Distillation tip spanner
- Starter guide
The Create+ 90° Elbow Section is designed for use with 2” tri-clamp compatible distilling systems. The stainless steel 90° Elbow Section integrates into a modular distilling system, redirecting vapour flow.
Key features:
- Connects to 2" tri-clamp distilling accessories
- 304 grade sainless steel construction
- High temperature resistent food grade silicone
INSTRUCTIONS: Insert the 90° Elbow Section into your distilling system, ensuring the silicone gasket is placed in the tri-clamp connection. Secure with a tri-clamp.
CLEANING BEFORE USE: Rinse all components with fresh, clean water before the first distillation run.
CLEANING AFTER USE: If needed, thoroughly rinse the section to remove any wash or debris. Use a non-scented brewery cleaner and a soft brush to remove any stubborn debris.
CAUTION: After distillation is complete, the surface will be very hot. Allow to cool before handling.
DISCLAIMER: Please note that in certain countries alcohol distillation and the possession of distilling equipment is illegal and permits/licenses may be required. For guidance or advice, contact your relevant local authorities.
WHATS INCLUDED
- 90° Elbow Section
- 2" Tri-clamp
- 2" Silicone Gasket
SPECIFICATIONS
- Dimensions: H 11.3 cm x W 11.3 cm x D 5.1 cm
- Weight: 0.285 kg
NOTE: The Still Spirits Boiler Lid and Alembic Dome are designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. The lid and dome are reasonably flexible and sturdy enough to fit components that are within the following specifications:
- A total column & condenser height up to 1.1 m (3.6 ft) from the lid or dome.
- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6”) to the main column.
We recommend external support if:
- Your column & condenser exceeds the above specifications.
- The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight.
- If the column & condenser is noticeably leaning.
The Create+ Beeping Alarm Thermometer allows your cstomer to set a high and a low temperature on the thermometer of their Create+ T500 Column & Condenser or Create+ Alembic Condenser. The thermometer will beep to notify them that the high or low temperature has been reached so they can make adjustments to their waterflow or distillation as required.
Product Features:
- Ø5 mm Probe
- High & low temperature alarms
- Celsius & Fahrenheit setting
Compatible with:
- Create + T500 Column & Condenser
- Alembic Copper Condenser
- 2" Straight Tubes
Whats Included
- Create+ Beeping Alarm Thermometer
- 2" Mounting Bracket
- AAA Battery
- Instructions
Specifications
- Display Resolution: 0.1℃ / 0.1°F
- Alarm Resolution: 1℃ / 1°F
- Measuring Range: -50~300℃(-58~572°F)
- Display Accuracy: ±1℃/°F
he Create+ Boiler 25 L is the recommended boiler base for use with the Create+ T500 Column & Condenser and the Create+ Alembic Copper Dome & Condenser. With a maximum capacity of 25 litres, the Boiler 25 L is designed for distillers seeking precise control and versatile functionality. It features dual element control switches to provide more control during distillation. The Boiler 25 L comes complete with a 2" tri-clamp to DN40 threaded adapter, allowing for connection to 2" tri-clamp accessories, so your customers can experiment with different setups and attachments.
Key Features:
- Dual element control switches provide more control during distillation - when both switches are in the ON position, the element will be supplied full power of 2200W (1600 if using a US/CA unit). When one switch is in the OFF position, it will only consume 1100W (or 1100W/500W if using a US/CA unit) of power.
- Designed in New Zealand
- Boil dry reset
- Thermal cut out fuse
- Waste discharge tap with a stainless-steel ball valve
- Boiler lid with 48 mm opening
- 25 L Boiler capacity
- Connects to 2" tri-clamp distilling accessories
- 304 grade sainless steel construction
- High temperature resistent food grade silicone
WHATS INCLUDED
- Create+ Boiler 25 L
- Create+ Boiler Lid
- 2" Tri-clamp to DN40 Threaded Adapter (includes: Silicon gasket and DN40 Nut)
- Instructions
SPECIFICATIONS
- Capacity: 25 L
- Dimenions: H 64 cm x W 36 cm x D 37 cmWeight: 5.42 kg
- Power: 2200W (1600W for US/CA Units)
- Warranty: 3 years
NOTE: The Boiler is designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. When used with the Still Spirits Boiler 25 L lid or Alembic Dome, it is reasonably flexible and is sturdy enough to fit components within the following specifications:
- A total column & condenser height up to 1.1 m (3.6 ft) from the boiler lid or dome.
- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg lbs) off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6") to the main column.
The Create+ Multi-Tube Condenser (Shotgun Condenser) is designed for use with 2” tri-clamp compatible distilling systems. The stainless steel condenser integrates into a modular distilling system, cooling vapour by passing it through multiple tubes, efficiently condensing it into liquid.
As a product condenser, the Condenser acts as a compact yet powerful solution for efficient vapour condensation in your distillation setup. With five internal tubes designed to maximise surface area and heat exchange, it rapidly cools vapour into liquid distillate. Constructed from high-quality 304-grade stainless steel and equipped with tri-clamp fittings, it offers both durability and easy integration into any system.
As a reflux condenser/dephlegmator, when mounted vertically at the top of your column, the Condenser performs as a dephlegmator, delivering reflux control for improved separation and purity. It's short 150 mm length and five-tube layout make it ideal for hobbyists and small-scale distillers looking to precisely manage reflux and fine-tune their distillation process.
Key features:
- Works as a product condenser & reflux condenser/dephlegmator
- Connects to 2" tri-clamp distilling accessories
- 304 grade sainless steel construction
- High temperature resistent food grade silicone
NOTE: PTFE/thread tape, hoses and hose clamps are not included.
- To secure the connection we recommend wrapping the thread on both hose barbs with 2-3 revolutions of PTFE/thread tape in the clockwise direction.
- We recommend hoses with an internal diameter (ID) between 6 and 7.9mm (1/4 to 5/16”). For hoses with a smaller ID, applying hot water to the hose end may assist with assembly; for hoses with a larger ID, hose clamps may be required to ensure a secure connection.
WHATS INCLUDED
- 5-Tube Shotgun Condenser
- 2" Tri-clamp
- 2x Hose barbs
- 2" Silicone gasket
SPECIFICATIONS
- Dimensions: H 14.96 cm x W 5.1 cm x D 5.1 cm
- Port thread specification: G1/4" (BSPP 1/4")
- Hose barb specification: R1/4" (BSPT 1/4"), barb diameter 8mm
- Internal tube diameter: 11 mm
- Weight: 0.796 kg
NOTE: The Still Spirits Boiler Lid and Alembic Dome are designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. The lid and dome are reasonably flexible and sturdy enough to fit components that are within the following specifications:
- A total column & condenser height up to 1.1 m (3.6 ft) from the lid or dome.
- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6”) to the main column.
We recommend external support if:
- Your column & condenser exceeds the above specifications.
- The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight.
- If the column & condenser is noticeably leaning.
The Still Spirits Create+ Sight Glass Botanical Basket, the Create+ Threaded Adapter Set, and a 2" Tri-Clamp bundle allows you to convert your threaded Still Spirits T500 or Alembic condenser to a tri-clamp connection to use the the Create+ Sight Glass Botanical Basket and other 2" tri-clamp accessories with older model condensers.
Sight Glass Botanical Basket Set
This high-quality sight glass botanical basket set is designed for use with 2” tri-clamp compatible distilling systems. This set can be used as a sight glass to monitor your distillation run or attach the mesh filters as per the instructions to convert the sight glass into a botanical basket. The sight glass will hold up to 150 g (5.2 oz) of botanicals and is suitable for fine botanicals. Compatible with 2” tri-clamp distilling systems, including the Grainfather G40/G70 Distilling Lid T500 Reflux Attachment Kit and Grainfather G40/G70 Distilling Lid T500 Alembic Attachment Kit.
Key Features:
- 2" Tri-clamp connectivity
- Sight Glass constructed with 304 grade stainless steel and borosilicate glass
- Sight Glass Holds up to 150 g ( 5.2 oz) Botanicals
- 304 grade stainless steel construction
- High temperature resistant food grade silicone
Threaded Adapter Set comprised of:
- DN40 Nut
- Sieved Gasket
- Silicone Gasket
- 2" Tri-Clamp to DN40 Threaded Adapter
- 2" Tri-Clamp
Create+ Sight Glass Botanical Basket comprised of:
- 1 x Sight glass botanical basket with 2" tri-clamp ferrules
- 1 x 2” Tri-clamp
- 2 x Mesh filters (size 10)
Instructions:
For use as a botanical basket:
- Attach the sight glass to the lid of your distilling system using one of the mesh filters and the 2” tri-clamp.
- Fill the sight glass with your desired amount of botanicals - up to a maximum of 150 g (5.2 oz).
- Put the second mesh filter on the top of the sight glass.
- Using a 2” tri-clamp connect the top of the sight glass to your condensing set up.
For use as a sight glass: Attach the sight glass to your distilling system (mesh filters are not required).
Cleaning: Clean with warm water and a suitable brewery cleaner. Using a pipe brush, clean away all residual oils on the glass. Disassembly should only be required if heavy soiling around the silicone components exists. Sanitation is not needed in this application.
Note: For use as a column extension with packing material coarse mesh is required to prevent flooding.
Specifications
- Dimensions: 246mm (h) x 100mm (w) x 100mm (d)
- Weight: 1.49 kg
CAUTION: After distillation is complete, the sight glass will be very hot. Allow to cool before handling
NOTE: The Threaded Adapter Set is designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. When used with the Still Spirits Boiler 25 L lid or Alembic Dome, it is reasonably flexible and is sturdy enough to fit components within the following specifications:
A total column & condenser height up to 1.1 m (3.6 ft) from the boiler lid or dome.
A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg lbs) off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6") to the main column.
Note: The Create + Threaded Adapter Set is only suitable for use with Still Spirits Alembic Copper Condensers sold from 2019 onwards.
The Create+ Sight Glass Bubble Plate is designed for use with 2” tri-clamp compatible distilling systems. Bubble Plates are designed to promote reflux and provide visual feedback of the distillation process*. Sight Glass made from 304 grade stainless steel and borosilicate glass.
*Results may vary, depending on your individual set-up.
KEY FEATURES
- Connects to 2" tri-clamp distilling accessories
- Copper Bubble Plate with stainless steel guide ramp
- Sight Glass: Borosilicate & 304 grade stainless steel construction
- High temperature resistant food grade silicone
WHATS INCLUDED
- Sight Glass
- Copper Bubble Plate with Silicone Flat Sea
- 2" Tri-clamp
- 2" Silicone Gasket
SPECIFICATIONS
- Dimensions: H 16.7 cm x W 5.1 cm x D 5.1 cm
- Plate WT 1 mm, diameter Ø50.0±0.2. Perforations approx. Ø 2mm.
- Weight: 1.116 kg
NOTE: The Still Spirits Boiler Lid and Alembic Dome are designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. The lid and dome are reasonably flexible and sturdy enough to fit components that are within the following specifications:
- A total column & condenser height up to 1.1 m (3.6 ft) from the lid or dome.
- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6”) to the main column.
We recommend external support if:
- Your column & condenser exceeds the above specifications.
- The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight.
- If the column & condenser is noticeably leaning.
The Create+ Straight Section is designed for use with 2” tri-clamp compatible distilling systems. The stainless steel Straight Section extends the column for enhanced reflux or integrates into a modular distilling system.
Key features:
- Connects to 2" tri-clamp distilling accessories
- 304 grade stainless steel construction
- High temperature resistant food grade silicone
INSTRUCTIONS: Insert Straight Section into your distilling system ensuring the silicone gasket is placed in the tri-clamp connection. Secure with a tri-clamp.
CLEANING BEFORE USE: Rinse all components with fresh, clean water before the first distillation run.
CLEANING AFTER USE: If needed, thoroughly rinse the section to remove any wash or debris. Use a non-scented brewery cleaner and a soft brush to remove any stubborn debris.
CAUTION: After distillation is complete, the surface will be very hot. Allow to cool before handling.
WHATS INCLUDED
- Straight Section
- 2" Tri-clamp
- 2" Silicone Gasket
SPECIFICATIONS
- Dimensions: H 30.0 cm x W 5.1 cm x D 5.1 cm
- Weight: 0.583 kg
NOTE: The Still Spirits Boiler Lid and Alembic Dome are designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. The lid and dome are reasonably flexible and sturdy enough to fit components that are within the following specifications:
- A total column & condenser height up to 1.1 m (3.6 ft) from the lid or dome.
- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6”) to the main column.
We recommend external support if:
- Your column & condenser exceeds the above specifications.
- The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight.
- If the column & condenser is noticeably leaning.
Key Features
- All-in-one reflux column and condenser
- For intermediate-advanced distilling
- Suitable for distilling water and alcohol
- Designed in New Zealand
- 304 Grade stainless steel
- 2" Tri-clamp connection
- Packed with stainless steel and copper saddles
- Faucet adaptor for ease of cooling water connection
- Ideal for use with the Create+ Boiler 25 L, as well as the Grainfather G30, G40, and G70 Brewing Systems.
Specifications
- Dimensions: H 69 cm x W 8.5 cm x D 16 cm
- Weight: 2.3-2.99 kg
- Warranty: 3 years
- Ease of Use: Intermediate
- Average water use during distillation: You will use approx. 200 L (54 US Gal) per 25 L distillation.*
- Yield: 8 L (2.1 US Gal) of 40% ABV alcohol per 25 L (6.6 US Gal) wash (based on using the standard recipe of 6 kg (13.2 lb) of sugar**
- Purity: Distills at up to 93% ABV (186 US proof) before diluting to 40% ABV (80 US proof)**
* When used with the Create+ Water Flow Regulator.
**Per 25 L (6.6 US Gal) Turbo Classic 8 Production pack wash using the Create+ Boiler 25 L and T500 Reflux Condenser.
Whats Included
- Create+ T500 Column & Condenser
- Create+ 2" Tri-Clamp
- Copper and Stainless Steel Saddles (Pre-Packed)
- Digital Thermometer
- 2 x Cooling Water Tues
- Ceramic Boil Enhancers
- Tap Adapter Flow Controller with Kitchen and Garden Tap Adapters
- Instructions
The Create+ T500 Column & Condenser, Boiler & Distillery Kit is the ultimate set-up for producing quality neutral spirits and liqueurs at home.
This kit comes with everything you need to make high-quality spirits at home using the Create+ T500 Column & Condenser. This system is also suitable for distilled water and hydrosols.
The Create+ T500 Column & Condenser features a 2" tri-clamp connection, allowing for it to be connected to 2" tri-clamp accessories, so your customers have the option to experiment with different setups and attachments. The T500 Boiler features two power switches. When both switches are on, the element will be supplied full power of 2200W for 220V units, or 1600W for 120V units. You can lower this to 1100W by switching one of the two switches off (220V unit) or by switching off the 500W switch (120V unit).
Features (For full list of features, see individual product pages):
• All-in-one reflux column and condenser + boiler
• 2" Tri-clamp connection on Column & Condenser
• For intermediate-advanced distilling
• Suitable for distilling water and alcohol
• Designed in New Zealand
• 304 Grade stainless steel construction
• Connects to 2" tri-clamp distilling accessories
• Dual boiler element control switches provide more control during distillation - when both switches are in the ON position, the element will be supplied full power of 2200W. When one switch is in the OFF position, it will only consume 1100W of power.
• 25 L Boiler capacity.
• Ingredients and equipment to make a wash and flavour distillate.
Note: This product includes a Still Spirits Create+ Threaded Adapter Set and 2" Tri-clamp inside the Still Spirits Boiler 25 L box. They are for use with tri-clamp connection condensers and are not required for condensers with a threaded connection.
Whats Included
- Create+ T500 Column & Condenser (threaded connection)
- T500 Boiler 25 L
- 6 kg Turbo Production Pack
- 30 L Plastic Fermenter complete with Tap, Sediment Reducer, Airlock, Grommet and Stick On Thermometer
- EZ Filter
- 5 L Measuring Jug/Collector
- 50 cm Stirring Spoon
- Hydrometer
- Classic Spirit Flavourings (3)
- Icon Liqueurs Spirit Flavourings (2)
Note: This product includes a Still Spirits Create+ Threaded Adapter Set and 2" Tri-clamp inside the Still Spirits Boiler 25 L box. They are for use with tri-clamp connection condensers and are not required for condensers with a threaded connection.
Engineered for simplicity and efficiency, the Create+ T500 Column & Condenser and Create + Boiler 25 L bundle provides a high-performance reflux distilling system that produces exceptionally clean distillate.
Its 2" tri-clamp connection allows for it to be connected to 2" tri-clamp accessories, so your customers have the option to experiment with different setups and attachments. The T500 features a cutting-edge design that incorporates pre-packed copper and stainless-steel saddles. This innovative amalgamation ensures optimal vapour reflux, facilitating the production of superior-quality distillate. Ideal for both novice and experienced distillers, the T500 redefines convenience in home distillation, delivering unmatched results with a seamless blend of form and function.
With a maximum capacity of 25 litres, the Boiler 25 L features dual element control switches, providing more control during distillation. It comes complete with a 2" tri-clamp to DN40 threaded adapter, allowing for connection to 2" tri-clamp accessories, so your customers can experiment with different setups and attachments.
Features (For full list of features, see individual product pages):
• All-in-one reflux column and condenser + boiler
• 2" Tri-clamp connection on Column & Condenser
• For intermediate-advanced distilling
• Suitable for distilling water and alcohol
• Designed in New Zealand
• 304 Grade stainless steel construction
• Connects to 2" tri-clamp distilling accessories
• Dual boiler element control switches provide more control during distillation - when both switches are in the ON position, the element will be supplied full power of 2200W. When one switch is in the OFF position, it will only consume 1100W of power.
• 25 L Boiler capacity
Note: This product includes a Still Spirits Create+ Threaded Adapter Set and 2" Tri-clamp inside the Still Spirits Boiler 25 L box. They are for use with tri-clamp connection condensers and are not required for condensers with a threaded connection.
Whats Included
- Create+ T500 Column & Condenser
- Create+ Boiler 25 L
Note: This product includes a Still Spirits Create+ Threaded Adapter Set and 2" Tri-clamp inside the Still Spirits Boiler 25 L box. They are for use with tri-clamp connection condensers and are not required for condensers with a threaded connection.
Specifications
Boiler
- Capacity: 25 L
- Dimenions: H 64 cm x W 36 cm x D 37 cm
- Weight: 5.42 kg
- Power: 2200W (1600W for US/CA Units)
- Warranty: 3 years
NOTE: The Boiler is designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. When used with the Still Spirits Boiler 25 L lid or Alembic Dome, it is reasonably flexible and is sturdy enough to fit components within the following specifications:
- A total column & condenser height up to 1.1 m (3.6 ft) from the boiler lid or dome.
- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg lbs) off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6") to the main column.
T500 Column & Condenser:
- Dimensions: H 69 cm x W 8.5 cm x D 16 cm
- Weight: 2.3-2.99 kg
- Warranty: 3 years
- Ease of Use: Intermediate
- Average water use during distillation: You will use approx. 200 L (54 US Gal) per 25 L distillation.*
- Yield: 8 L (2.1 US Gal) of 40% ABV alcohol per 25 L (6.6 US Gal) wash (based on using the standard recipe of 6 kg (13.2 lb) of sugar**
- Purity: Distills at up to 93% ABV (186 US proof) before diluting to 40% ABV (80 US proof)**
* When used with the Create+ Water Flow Regulator.
**Per 25 L (6.6 US Gal) Turbo Classic 8 Production pack wash using the Create+ Boiler 25 L and T500 Reflux Condenser.
Engineered for modularity and performance, the T500 Pro is an all-in-one reflux column and condenser designed to streamline the distillation process while delivering exceptional results. This innovative unit combines advanced functionality with unmatched convenience, eliminating the need for separate components. Its integrated design features a pre-packed column with both copper and stainless steel saddles, optimising vapour reflux and elevating the quality of your distillate.
Constructed from the highest quality materials, the T500 Pro is crafted with precision using T2-grade copper for the column and cold finger coil, complemented by durable stainless steel tri-clamp ferrules. The use of copper in the spirit path enhances the distillation process by reducing unwanted compounds, ensuring a cleaner, smoother finish. Food-grade, high-temperature silicone seals are included for use in the tri-clamp connections.
The T500 Pro features a thermowell at the top of the column for accurate vapour temperature monitoring, a beeping alarm thermometer with adjustable high and low temperature alerts, and robust 2” tri-clamp fittings for a secure, modular setup. The detachable product condenser and removable cold finger cooling coil offer added versatility, while improved water efficiency saves up to 30% compared to the original T500, depending on usage.
Ideal for producing clean, neutral alcohol, the T500 Pro delivers exceptional clarity and purity in every run. It can reach up to 93% ABV and recover up to 95% of the alcohol from your wash—producing a neutral spirit that’s ideal for vodka or as a base for flavourings, gins, and other botanical spirits. The T500 Pro is perfect for distilling water, thanks to the combined performance of copper and stainless steel saddles, which aid in the effective removal of impurities.
The T500 Pro is compatible with the Create+ Boiler 25 L and the Grainfather G30, G40, and G70 Brewing Systems, making it a powerful and flexible addition to any distiller’s setup.
Key Features
- All-in-one reflux column and condenser
- Suitable for distilling water and alcohol
- Constructed from high-quality T2-grade copper with stainless steel tri-clamp ferrules
- Designed in New Zealand
- Pre-packed with copper (105 g) and stainless steel saddles (485 g)
- 2" tri-clamp connections
- Integrated thermowell in the column head for accurate vapour temperature readings
- Beeping alarm thermometer with adjustable high/low temperature alerts
- Removable cold finger cooling coil and detachable product condenser
- No plastic components in the spirit path
- Food-grade silicone seals
- Saves up to 30% water compared to the original T500 (depending on usage)
- Compatible with Create+ Boiler 25 L, and Grainfather G30, G40, and G70 Brewing Systems
Specifications
- Dimensions: H 67.7 cm x W 12.1 cm x D 10.8 cm
- Weight: 2.63 kg
- Warranty: 3 years
- Ease of Use: Intermediate
- Average water use during distillation: You will use approx. 140 L (37 US Gal) per 25 L distillation.*
- Yield: 8 L (2.1 US Gal) of 40% ABV alcohol per 25 L (6.6 US Gal) wash (based on using the standard recipe of 8 kg (17.6 lb) of sugar**
- Purity: Distills at up to 93% ABV (186 US proof) before diluting to 40% ABV (80 US proof)**
- When used with the Create+ Water Flow Regulator.
**Per 25 L (6.6 US Gal) Turbo Classic 8 Production pack wash using the Create+ Boiler 25 L and T500 Pro Column & Condenser.
Whats Included
- Create+ T500 Pro Column & Condenser
- 2 x Create+ 2" Tri-Clamps
- Copper and Stainless Steel Saddles (Pre-Packed)
- Create+ Beeping Alarm Thermometer with 2" Mounting Bracket
- 2x Cooling Water Tubes
- Ceramic Boil Enhancers
- Tap Adapter Flow Controller with Kitchen and Garden Tap Adapters
- Instructions
Engineered for modularity and performance, the T500 Pro is an all-in-one reflux column and condenser designed to streamline the distillation process while delivering exceptional results. This innovative unit combines advanced functionality with unmatched convenience, eliminating the need for separate components. Its integrated design features a pre-packed column with both copper and stainless steel saddles, optimising vapour reflux and elevating the quality of your distillate.
With a maximum capacity of 25 litres, the Boiler 25 L features dual element control switches, providing more control during distillation. It comes complete with a 2" tri-clamp to DN40 threaded adapter, allowing for connection to 2" tri-clamp accessories, so your customers can experiment with different setups and attachments.
Ideal for producing clean, neutral alcohol, this duo delivers exceptional clarity and purity in every run. It can reach up to 93% ABV and recover up to 95% of the alcohol from your wash—producing a neutral spirit that’s ideal for vodka or as a base for flavourings, gins, and other botanical spirits. The T500 Pro is perfect for distilling water, thanks to the combined performance of copper and stainless steel saddles, which aid in the effective removal of impurities.
Features (For full list of features, see individual product pages):
• All-in-one reflux column and condenser constructed from high-quality T2-grade copper with stainless steel tri-clamp ferrules
• Suitable for distilling water and alcohol
• Saves up to 30% water compared to the original T500 (depending on usage)
• Dual boiler element control switches provide more control during distillation - when both switches are in the ON position, the element will be supplied full power of 2200W. When one switch is in the OFF position, it will only consume 1100W of power.
• 25 L Boiler capacity
• Designed in New Zealand
Note: This product includes a Still Spirits Create+ Threaded Adapter Set and 2" Tri-clamp inside the Still Spirits Boiler 25 L box. They are for use with tri-clamp connection condensers and are not required for condensers with a threaded connection.
Whats Included
- Create+ T500 Pro Column & Condenser
- T500 Boiler 25 L
Note: This product includes a Still Spirits Create+ Threaded Adapter Set and 2" Tri-clamp inside the Still Spirits Boiler 25 L box. They are for use with tri-clamp connection condensers and are not required for condensers with a threaded connection.
Specifications
Boiler
- Capacity: 25 L
- Dimenions: H 64 cm x W 36 cm x D 37 cm
- Weight: 5.42 kg
- Power: 2200W (1600W for US/CA Units)
- Warranty: 3 years
NOTE: The Boiler is designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. When used with the Still Spirits Boiler 25 L lid or Alembic Dome, it is reasonably flexible and is sturdy enough to fit components within the following specifications:
- A total column & condenser height up to 1.1 m (3.6 ft) from the boiler lid or dome.
- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg lbs) off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6") to the main column.
Pro Column & Condenser
- Dimensions: H 67.7 cm x W 12.1 cm x D 10.8 cm
- Weight: 2.63 kg
- Warranty: 3 years
- Ease of Use: Intermediate
- Average water use during distillation: You will use approx. 140 L (37 US Gal) per 25 L distillation.*
- Yield: 8 L (2.1 US Gal) of 40% ABV alcohol per 25 L (6.6 US Gal) wash (based on using the standard recipe of 8 kg (17.6 lb) of sugar**
- Purity: Distills at up to 93% ABV (186 US proof) before diluting to 40% ABV (80 US proof)**
- When used with the Create+ Water Flow Regulator.
**Per 25 L (6.6 US Gal) Turbo Classic 8 Production pack wash using the Create+ Boiler 25 L and T500 Pro Column & Condenser.
The Create+ Thermowell 90° Elbow Section is designed for use with 2” tri-clamp compatible distilling systems. The stainless steel 90° elbow section with a thermowell integrates into a modular distilling system, redirecting vapour flow while enabling temperature monitoring.
Key features:
- Connects to 2" tri-clamp distilling accessories
- Integrated thermowell
- 304 grade sainless steel construction
- High temperature resistent food grade silicone
INSTRUCTIONS: Insert 90° Elbow Section into your distilling system ensuring the silicone gasket is placed in the tri-clamp connection. Secure with a tri-clamp. Secure your thermometer's sensor probe in the thermowell by using the provided plastic and silicone sleeves and the stainless steel nut. If not using a probe, seal off the thermowell using the provided stainless steel cap and O-ring.
CLEANING BEFORE USE: Rinse all components with fresh, clean water before the first distillation run.
CLEANING AFTER USE: If needed, thoroughly rinse the section to remove any wash or debris. Use a non-scented brewery cleaner and a soft brush to remove any stubborn debris.
CAUTION: After distillation is complete, the surface will be very hot. Allow to cool before handling.
WHATS INCLUDED
- Thermowell 90° Elbow Section
- 2" Tri-clamp
- 2" Silicone Gasket
- Black O-ring Gasket
- Thermowell Stainless Steel Cap
SPECIFICATIONS
- Dimensions: H 11.3 cm x W 11.3 cm x D 5.1 cm
- Thermowell compatible with Ø5 to 6mm probes
- Weight: 0.297 kg
NOTE: The Still Spirits Boiler Lid and Alembic Dome are designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. The lid and dome are reasonably flexible and sturdy enough to fit components that are within the following specifications:
- A total column & condenser height up to 1.1 m (3.6 ft) from the lid or dome.
- A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg (4.4 lbs) of off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6”) to the main column.
We recommend external support if:
- Your column & condenser exceeds the above specifications.
- The lyne arm is not vertical but angled or perpendicular running away from the column, resulting in significantly distant off-centre weight.
- If the column & condenser is noticeably leaning.
The Still Spirits Create+ Threaded Adapter Set converts a DN40 (or 1 ½ " BSPP) threaded connection to a 2" tri-clamp connection. The Threaded Adapter Set allows your customers to convert their existing Still Spirits Alembic or T500 distilling setups to connect to 2" tri-clamp accessories.
Key Features:
- Convert from DN40 (or 1 ½ " BSPP) threaded connection to 2" tri-clamp connection.
- Connect to 2" tri-clamp distilling accessories
- 304 grade stainless steel construction
- High temperature resistant food grade silicone
Whats Included
- DN40 Nut
- Sieved Gasket
- Silicone Gasket
- 2" Tri-Clamp to DN40 Threaded Adapter
Specifications
Packaging Dimensions: 80mm x 80mm x 65mm
Weight: ~400g Approx.
NOTE: The Threaded Adapter Set is designed primarily for small to medium-sized distilling setups that do not have heavy, off-centre attachments. When used with the Still Spirits Boiler 25 L lid or Alembic Dome, it is reasonably flexible and is sturdy enough to fit components within the following specifications:
A total column & condenser height up to 1.1 m (3.6 ft) from the boiler lid or dome.
A total column & condenser weight up to 11 kg (24 lbs), including up to 2 kg lbs) off-centre weight from a swan neck, lyne arm, or condenser running in parallel with the column and offset up to 160 mm (6") to the main column.
Note: The Create + Threaded Adapter Set is only suitable for use with Still Spirits Alembic Copper Condensers sold from 2019 onwards.
