Search results

These seals replace the red o-ring seal inside the 20L Oxebar kegs.

Includes:
5 x Low2 Keg Lid Seals to suit the 20L Oxebar Keg (Yellow)

These seals replace the red o-ring seal inside the 20L Oxebar keg lids.

What is Low2?
Low2 O-Rings are the new golden yellow standard of homebrew kegs brought to you by KegLand Australia. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.

The same material O-Ring (Low2) were independently tested on the 19L stainless steel kegs by GunnLab. 

From: Kegland

A new 19 litre keg with ball-lock gas in and beer out posts, and lid with pull-ring pressure relief valve.

These new kegs are made with a high-barrier elastomer O-Rings to keep your beverage fresher for longer.

Unlike Silicone O-Rings, LOW2 O-Rings are made from synthetic M-Class Cross-Linked elastomer for superior oxygen barrier properties to prevent O2 ingress. This helps keep your beverage fresher for longer.

These premium brand new kegs are rated to 130PSI working pressure and are made using a robotic orbital welding machine. They have smooth welds making them sanitary and easier to clean. The black rubber on these kegs makes them a little nicer to use around your house as they are less likely to damage your tile floors or crack plastic lining inside your kegerator. 

They also have a lid with an internal tab/hook under the lid designed specifically for attaching a container for dry hopping.

Add a Carbonating Keg Lid to carbonate your beer quickly (overnight) at your standard serving pressure.

Dimensions: approx. 214mm Diameter x 629mm High

DO NOT USE BLEACH TO CLEAN. Bleach will break down stainless steel and causing pitting to occur.

This simple design allows you to extract the clearest possible liquid in your pressure vessel with the added security of our new filter included. This helps prevent blockages in your carbonation cap poppet. As the liquid level decreases the float goes down at the same time. Perfect for sampling the sediment free!

The new yellow cap is weighted to approximately 10g! Making it sink just that little bit lower to gain more liquid and less likely to suck air.

This 100cm silicone dip tube and stainless steel float with filter suits:
- FermZilla Tri-Conical 27L
- FermZilla Tri-Conical 55L
- FermZilla All Rounder 30L
- FermZilla All Rounder 60L
Also Compatible with Kegmenters, 50L Kegs and Modified Ball Lock Kegs (not minikegs).

From: Kegland

This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.

Having the thermowell attach to the lid of a fermenter is ideal as it means the penetration through the fermenter body is at the top of the fermenter not below the liquid line. This makes the whole process more sanitary and reduces the number of difficult parts to clean.

This thermowell can be pushed through a bung with a 6-8mm hole but it also includes the Duotight bulkhead fitting that you can use to attach this thermowell to the lid of your FermZilla Fermenter.

It goes right into the middle of the core of your vessel meaning you get an accurate core reading of the liquid in the tank/vessel.

Note: If you need to shorten the length of this thermowell tube then simply use a tube cutter to the desired length.

Made from: 304 stainless steel
Dimensions: 8mm OD x 7mm ID
From: Kegland

This handy spring clamp has been the tool of choice for many KegLand employees to hold the malt pipe silicone hose in place during the mash.

Handy Clamp (4" Long) - ideal for use with a Brewzilla.

This clamp features a heavy-duty muslin spring which ensures your silicone hose never accidentally pops out of your mash tun and spills your precious nectar over your brewery floor.

It features rounded handles for a comfortable grip and a PE end grip to ensure your hosing is kept secure.

This clamp is made from PP and PE which have good chemical resistance so it will stand up to the task for use around common brewing cleaners and sanitisers such as StellarClean/PBW and StellarSan.

These spring clamps have a multitude of potential uses throughout your brewing outside of securing silicone hosing.

From: Kegland

With the portable dispensing kit, you will now be able to dispense straight from the keg (think party kegs!) which means you will be able to take your homemade beer to parties, BBQs and other gatherings where you can share your brews with others.

The kit has an inlet for standard threaded disposable 16g CO2 canisters plus adaptors for paintball cylinders, 74g CO2 cartridges and SodaStream cylinders!

Kit Contains:

• Portable Keg Dispensing Kit 
• Threaded Gas Ball Lock Disconnect 
• Threaded Liquid Ball Lock Disconnect 
• Mini Keg Ball Lock Cap 
• Mini Keg Diptube Hosing 10 L 
• Mini Keg 10 L 

With the portable dispensing kit, you will now be able to dispense straight from the keg (think party kegs!) which means you will be able to take your homemade beer to parties, BBQs and other gatherings where you can share your brews with others.

The kit has an inlet for standard threaded disposable 16g CO2 canisters plus adaptors for paintball cylinders, 74g CO2 cartridges and SodaStream cylinders!

Kit Contains:

• Portable Keg Dispensing Kit 
• Threaded Gas Ball Lock Disconnect 
• Threaded Liquid Ball Lock Disconnect 
• Mini Keg Ball Lock Cap 
• Mini Keg Diptube Hosing 5 L 
• Mini Keg 5 L 

The Cold Activated Keg Filler Stickers change from yellow to green when chilled, making it easy to see your beer level while filling cold kegs and take the guesswork out of kegging.

Size: 225mm x 12mm
Colour Warm: Yellow
Colour Cold: Green

One sticker will suit the 9.5L Keg.

Please note: For 19L Kegs if you want it full length, use two stickers.

From: Kegland

The BlowTie Diaphram Spunding Valve - a great tool if you want to control the pressure retained in a pressure vessel that is releasing pressure. It has been designed for simplicity and ease of putting together. Many brewers use this spunding valve in combination with the FermZilla pressure rated fermenters.

This is the new "BlowTie 2" upgarded model which has the integrated pressure gauge. The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure. This BlowTie unit can be easily disassembled for cleaning using a screw driver. Designed to suit 8mm (5/16") tubing. It's compatible with both the 4mm ID Tubing or 5mm ID.

This compact solution for adjusting residual pressure in your fermenter makes pressure control easier than it's ever been. This can be used for compressed air, CO2, nitrogen, mains water supply and many other things but its primary use is to control the residual pressure inside fermenters.

Specifications:
1. Suits pressures 0-23psi (but with different gauges the unit can go above 100psi)
2. Made from food grade acetal
3. Stainless screws
4. 8mm (5/16") push on both sides

The design utilises the reliability of the Duotight o-ring system to make sure you can fit hoses to this unit quickly and with leak free connections.

Pressure Fermentations
With the popularity of pressurised fermentation it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process. The BlowTie has been designed specifically for this reason.

Pressure Transfers
When transferring from keg to keg, keg to bottle, or fermenter to keg it is often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process.

Traditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation. Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.

The BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.

Instructions:
Use the yellow adjustment knob to control the pressure coming out of the pressure vessel. Clockwise is higher pressure and anticlockwise is lower pressure. We would recommend gassing a keg to a known pressure e.g. 15psi then attach your BlowTie Kit to the keg and adjust to 10psi.

These gauges are accurate to about 10% of the range of the pressure gauge. So if you use the lowest range possible it will ensure the best possible accuracy.

IMPORTANT WARNING: Do not exceed gauge pressure. If you set a gauge pressure higher than the graduations on the gauge you can damage the gauge. (ie if you are using the 0-60psi gauge. Do not set pressure above 60psi or damage to the gauge may occur.)

Material: food grade engineering plastic, stainless steel and quality made EPDM seals
From: Kegland

Duotight - 9.5mm (3/8”) Female x 1/2 Male Thread Bulkhead (suits TempTwister).

Looking for high quaility push in fittings that will seal tight?  Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Why use Double O-rings?
The secret to the Duotight sealing performance is not just the fact that it uses high quality EPDM o-rings but also use two of them.  The double o-ring means it literally has twice the sealing surface surface when compared with other push in fittings.  This makes these fittings even more reliable and reduces the chance of a leak significantly.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

No clamps necessary! 
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi

Includes Locking Nut (suitable for the TempTwister).
This fitting is ideally used with the TempTwister for a FermZilla or KegMenter for use in the FermZilla Range, Kegmenter range or even drilled into an HDPE fermenter.

What is EPDM?
EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, a wide variety of alkaline and acid compounds, water, alcohol, ketone, and beverages.

EPDM is also resistant to aging, and weather and will not perish easily like other rubber compounds.   When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long-lasting food grade applications.

From: Kegland

Temp Twister Pump Kit with Return Line and Clamp.

If a glycol chiller is a bit out of reach at the moment, but you want to use the Temp Twister in your Kegmenter or FermZilla, this little product can help you on your way to cool your fermenter. Simply submerge the pump in a large bucket with water and ice.

The more insulation you give your fermenter and keep it at a relatively stable temperature the better. We suggest using this in conjunction with a temperature controller.

Parts List:
1 x 1.2m Length of Insulated 6mm x 9mm EVABarrier Hose
1 x 1.2m Length of 6mm x 9.5mm hose (return line back to the bucket) (colour may vary)
2 x 9.5mm duotight Elbows (For temp twister)
1 x Temp Twister 12v Pump and power supply

From: Kegland

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost. 

The Kegmaster Premium XL 2 Tap Kegerator from Keg King is a premium kegerator full of features for a professional experience when serving beverages at home.

Get up to 2 kegs on tap and save space as well as cooling times! 

The Kegmaster Premium can store up to 4 x 19 L ‘Corny’ kegs giving you the option of conditioning 2 kegs while serving from 2. Alternatively, the Kegmaster Premium XL can fit 2 x 20 L PET Kegs + 1 x 19 L ‘Corny’ keg, 3 x 20 L SS Commercial Kegs, or 1 x 50 L SS Commercial Keg.

The internal volume has increased from previous versions to an impressive 160 L capacity while keeping the kegerator compact enough to fit in typical ‘kegerator-size’ spaces. 

The Kegmaster Premium XL also includes the UltraTap for laminar flow and the perfect pour! Also includes are built-in, low-profile rollers so you can easily move your kegerator in position and a gas cylinder bracket that can be installed at the back for efficient storage of your CO2 cylinder.

With a preassembled font and gas line, there is minimal assembly required, meaning you can get round to serving your beer or other carbonated beverage quickly and with ease. 

Features:

• Built in rollers for easy moving – removeable and upgradeable to castors.
• Reversible Door – orient to open how you like.
• Font Fan with speed control – keeps your font cold and runs more quietly.
• Internal light – handy for inspecting keg connections.
• Suitable for free standing installations – can also be installed under counters.
• R600a Refrigerant – environmentally 

The kegerator is easy to set up and you only need to add a C02 Cylinder, pop in some kegs and you're good to go.

What's Included

• Kegmaster Premium XL Kegerator
• Preassembled 2-tap font and gas line
• MKX Regulator

Specifications

Height: 850 mm with rollers 830 mm without rollers 890 mm with castors
Width: 610 mm
Depth: 660 mm
Internal Height: 724.9 mm
Internal Width: 511.9 mm
Internal Depth: 405.1 mm
Volume: 160 L
Weight: 43 Kg
Power: 220-240V 50Hz
Climate Class: T
Refrigerant: R600a (40g)
Insulation: Cyclopentane
Packaged dimensions: H 88 cm W 66 cm D 69 cm

Garden Hose Female x Grip Hose Connector 12mm / 1/2" Coupling

These easy to use garden hose quick connector couplings are really handy for connecting your hose to a female hose adaptor.

Specifications:

• Brass Construction
• Fits most male garden hose fittings
• 12mm ~ 1/2inch Barb with compression grip fitting
• Includes rubber washer so no teflon tape needed

From: Kegland

Chillout Threaded MKIV - Counterflow Chiller - 30 Plate Heat Exchanger.

The Chillout MKIV, now with new and improved male 1/2" threaded posts is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start.

The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer.

To clean connect water to supply to the port where your wort was coming out and backflush the unit for a few minutes to ensure that any residue has been completely washed out.

Remember to sanitise either with boiling wort, or a short flush with StellarSan before use. Do not clean with StellarSoda or leave Phosphoric Acid based sanitisers left to store inside the plate chiller.

If you require mounting bolts (two spots on the rear), please use a M5 bolts (not included).

Dimensions: 315mm x 73mm x 51mm (not including threads)
From: Kegland

Duotight - 8mm x 1/4 inch BSP Male.

No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.

These push in fittings are suitable to be used up to 100 psi.

These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.

From: Kegland

 Nukatap Mini - Mini Design - Ideal Flow Rate for Small Systems

Most conventional beer taps are designed with a 10mm diameter nozzle/spout so you can pour pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but this high flow rate requirement is not not necessary or desirable for all applications.  For compact portable systems, or for home brew draft systems, a slower flow rate is easier to control the flow and further reduces foaming issues due to the low liquid volume stored in the tap body. 

This Nukatap mini is also more ideal for pouring smaller doses.  For example cocktails where 150-250ml of liquid is dispensed is difficult to control with a high flow rate tap.  For portable systems this tap and FC ball lock disconnect assembly is small enough to literally put in your pocket making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight.

Forward Sealing
Forward sealing taps are absolutely the way to go when it comes to beer taps.  The issue with rear sealing taps is that beer dries up on the tap piston.  This is not sanitary and as more and more beer dries up in these components the tap can almost glue complete shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside).  These older legacy design still exist probably due to poor education.  The forward sealing design do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduced maintenance.  In may instances the price is similar so there is no reason to use a poorly designed rear sealing tap.  All Nukatap taps are forward sealing.

Laminar Flow
Just like the Nuktap SS and Nukatap FC, the Nukatap Mini has been designed with laminar flow in mind.  Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage.  Think about how many times a beer tap opens and closes in it's lifetime - 1000 or maybe 10,000 times?  Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer.  Extensive modeling has been done on this Nukatap design to improve laminar flow.

Integrated Seals that are Indestructible and more Sanitary
Unlike other designs, the Nukatap Mini body is made from POK making it strong, robust and able to be autoclaved.  The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry.  The seals internally in are over-molded meaning NO fissures or cracks exist for bacteria, crud or yeast to hide.

Superior First Pour Foam Due to Low Thermal Mass and Conductivity
First pour foam is an issue caused by a warm tap body. For most taps to pour well it's important to dispense enough beer to cool the tap body down before the tap will pour well.  In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials.  The Nukatap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene and POK.  The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. 

Long Shank Alternative (Sold separately in Duotight design)
Most conventional beer taps require a large 22mm hole to be drilled through the wall of your keezer/cooler/wall.  Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal.  This new long shank alternative is designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself.  For walls up to 80mm thick we have provided three screws however if the wall is thicker you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type.

Another advantage of this new design is the tap will never accidentally rotate.  Typically other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate.  This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position.

Other Accessories (Sold Separately)
Nukatap Mini - Wall Mount Shank Kit - duotight 8mm (5/16")
Nukatap Mini - Self Closing Tap Spring
Nukatap Mini - duotight adaptor - 8mm (5/16")
Flow Control Ball Lock Disconnect

A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").

Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm

Note there is no tail piece included but a separate tail piece, nut and washer are offered as additional options.

Alternatively a Duotight 8mm - 5/8" Thread can be used.

Length: approx. 79mm (3-1/8"), 105mm (4-1/8"), or 130mm (5-1/8")
Usable length: approx. 50mm, 65mm or 80mm
Bore size: approx. 4.76mm (3/16")
Material: Stainless Steel
Made by: Krome Dispense

The forward sealing design shuts off the flow of beer at the front of the tap which will keep wild yeast and bacteria out of the interior of the tap body. This design will also keep your faucet moist. Since it is not drying out you will not get a sticky tap so the opening will always be easy.

This Beer faucet uses a threaded spout, compatible with Nukatap fittings, that can quickly and easily be removed and replaced with a range of other spouts including:

• Growler Filler – features a 1/2″ barb for easy growler filling
• Stout Spout – features an internal creamer disc for the perfect pint
• Ball Lock Post – allows for easy fill of smaller kegs or connect a counter pressure filler or line cleaner.

Other tap designs require you to replace the tap on the font when changing from one beer style to the next. This tap allows you to simply unscrew the standard spout and attach a range of different spout options to suit your beer style.

Compatible with all our shanks and tap handles.

Material: polished stainless steel
Body thread: 1-1/8 X 18 UNEF
Lever thread: 3/8" X 16 UNC

Note: handle and shank not included.

Also available with flow control.

From: Krome Dispense