Search results

Gas (grey or white) connector with MFL thread for ball lock corny kegs.

This is a premium plastic ball lock connector designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the disconnect.

Digital Illuminated Mini Gauge 0-90psi (0-6.2bar) - Duotight 8mm Stem.

Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age old technique works quite well especially in large gauges, but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges, such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.

Kegland has developed the worlds most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions is required.

Specifications:
Battery Life: More than 2 years (using the mini gauge once a day)
Battery Type: CR2032
Auto Battery Saver: YES, screen automatically turns off after 15sec
Size: 27mm x 27mm
Duotight Stem: 8mm

NOTE: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge.  If you want to measure liquid pressure you can purchase one of these analogue gauges:

KL07696 - Duotight Compatible Push in Pressure Gauge

From: Kegland

Nukatap - the latest in beer dispensing tap technology. This is the Flow Control model - looking for the non-flow control Nukatap?

What makes the Nukatap different among the other manufactured styles of taps on the market?
- First Pour Foam Reduction in Thermal Mass
- Improved Laminar Flow
- Most Sanitary Forward Sealing Design Design
- Longer Life Seals
- More Versatile Tap Handle Angle

First Pour Foam Reduction
The reduction in thermal mass significantly reduces the first pour foam effect. The tap is often the warmest part of the draft system as it protrudes from the font/tower/fridge. As a result, it acts like a heat sink and only works well once enough cold beer flows through it to cool the tap body down. This reduction of thermal mass significantly improves the foam that is poured while the tap is cooling down.

Laminar Flow
The Nukashuttle design is the world’s first seamless shuttle. After many months of modelling and testing this new "Nuke" shaped shuttle design has the most fluid dynamic shuttle shape ever manufactured for a forward sealing tap. The streamline "nuke/missile" shape is how this new innovation earned its name "Nukatap". This leap forward in laminar flow means even highly carbonated beers pour like a dream with minimal turbulence and giving you the perfect pour every time.

Most Sanitary Design
The Nukashuttle is the world’s first seamless single-piece design. Traditional taps have a seal that is seated on a stainless-steel body creating small fissures that harbour solids, are potential sites for infection, and are not as ideal for clean in place (CIP). The Nukashuttle is an advanced TPV rubber matrix that been seamlessly formed over a durable PP skeleton. This single-piece design takes away the traditional fissures found in older manufacturing methods.

Long Life Seals
Unlike many other taps that use rubbers that can be degraded with caustic and acid compounds, the Nukatap has been made to suit a wide range of conditions. It's becoming more common to see sour beers/kombucha and other acetic and lactic acid beverages dispensed using draft systems. These acids, in particular, could cause an attack on the sealing compounds resulting in downtime, loss of product and reduced maintenance intervals. The Nukatap solves this problem and is the most chemically resistant tap we have ever manufactured. Unlike some older tap styles that have "metal on metal" rubbing components that can wear over time and have a "raspy feel" the Nukatap has been manufactured with a smooth gliding action that guarantees the longevity of the tap components. The TPV rubber matrix shuttle is also one of the most durable sealing mechanisms that can tolerate large amounts of leverage force from long tap handles that would otherwise traditionally degrade the seals in other tap designs. Other forward sealing designs exist but nothing with the same level of reliability. It’s easy to find other “perl” forward sealing design taps however these taps use a floating o-ring design which by all means is equally as sanitary however the floating o-ring requires the o-ring to move within the tap body to seal correctly. This movement is typically a problem as the tap ages and/or is not serviced regularly. The Nukatap bypasses this seal as the entire Nukashuttle is a single sealing piece.

Tap Handle Angle - 2.5degree Reverse Angle
The Nukataps have been manufactured with a 2.5 degree reverse angle. This allows for a wider range of taps handles to be used, in particular, long and/or heavy handles to work perfectly irrespective of the installation conditions.

Forward Sealing Design
Just like the Intertap and its predecessors, the Nukatap shuts off the flow at the front of the tap which in turn keeps wild yeast and bacteria out of the interior of the tap body.

What does Rear Sealing Design Mean?
Typically most beer taps use a rear sealing design and the beer in the tap drains from the body of the tap with the help from a vent hole drilled at the front of the tap. This drainage hole is a dark and wet cavity and is an ideal place for airborne bacteria and wild yeast to reproduce leaving a foul film that deteriorates the quality of your beer. Every time the faucet is opened contamination can occur.

Compatible with Intertap and Nukatap accessories:
- Stout Spout
- Ball Lock Post Spout
- Growler Spout

From: Kegland

This is an upgrade accessory to the 35L& 65L BrewZilla Generation 4 only.
It is not compatible with any previous generations of BrewZilla, RoboBrew or DigiBoils.

It has been pressed into a slight concave shape to match the curvature of the boiler false bottom of the BrewZilla Gen 4. It also includes a longer eye bolt assembly with a wing nut.

The order of bolt to washer to nuts goes as follows. Eye bolt, washer, false bottom, washer, nut, HED then wing nut. This is so that the eye bolt does not come completely removed when and if you clean underneath the Heat Exchanger Dish.

What does it do?
Due to the concave bottom and central draining hole, the wort being recirculated through the pump will pass through the malt pipe and then down through the boiler false bottom. The wort would normally then follow the path of least resistance, making a b-line for that drainage hole.

The Heat Exchanger Dish forces the recirculating wort up to the edge of the BrewZilla base ensuring it passes over the elements for a longer period. This leads to a more efficient heat exchange with the wort, which can help you on a brew day reach those temperatures much quicker.

From: Kegland

This Duotight Push-Fit Elbow - 8mm x 8mm - will allow you to join beer or gas line sections on your kegging system. Simple to use and requires no tools.

Duotight push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.

These push in fittings are suitable to be used up to 100 psi. They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps. To remove the fitting simply push in the collet and the hose can be removed. We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal.

Fits 8mm outer diameter tube.

From: Kegland

A Barbed Swivel Nut, often used for MFL fittings.

Bore sizes usually available:
- 4.76mm (3/16")
- 6.35mm (1/4")

It can be used for both gas and liquid. You should also purchase a stainless Oetiker Clamp or Worm Clamp to secure the connected lines.

This Nukatap mini & Nukatap FC spring is designed to suit all Nukatap Mini taps and also the Nukatap Flow Control (FC) tap.  This custom made 304 grade spring size is designed specifically to ensure your Nukatap stays closed when it should.

Simple let go of the tap handle and the tap will snap shut and prevent accidentally leaving the tap on and emptying the keg onto the floor.

This handy, inexpensive devices suits all Nukatap Mini and Nukatap FC taps and shank combinations.

Note: Nukatap Mini sold separately.

From: Kegland

This manifold splits one line into two, each with a check valve. The check valve can also be removed if you want gas or water to move freely in both directions.

If you want to cap off certain lines, we would recommend using the Duotight - 8mm (5/16') Plug 

Using a thin flat headed screw driver, simply slide/pop the black retainer tabs and remove the ball valve.

The Duotight 8mm 2-way manifold is ready with mounting capabilities out of the box using button head screws. But if you're going to mount it on a kegerator, we would suggest using the Duotight 8mm adhesive brackets (no drilling required).

Not suitable for liquids other than filtered water.

Looking for high quality push in fittings that will seal tight?  Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Compatible with:
EVABarrier 4mm ID x 8mm OD line
EVABarrier 5mm ID x 8mm OD line
Red EVABarrier 5mm ID x 8mm OD line
Black Lightshield EVABarrier 4mm ID x 8mm OD line
Not compatible with 6.3mm ID x 9.5mm OD line

No clamps necessary! 
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

These push-in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push-in fittings on the market, Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push-ins on the market have EPDM o-rings, let alone two! per push-in connection.

From: Kegland

Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.

Now available in three pressure ratings:

Yellow - 17 PSI
Red - 35 PSI
Green - 65 PSI
Grey - 100 PSI

From: Kegland

PCO1881 Male x 2 Inch Tri-Clamp (POK)

For all you hop bongers out there. We have an end cap for all end caps! The Polyketone 2 Inch Tri-Clover x PCO1881 Male Thread (PET drink bottle thread like a Schweppes / Coca Cola bottle).

Perfect to use along side the 2" Tri-Clover Hop Bong
- PCO1881 PRV Cap with a Red 35psi Pressure Release Valve
- PCO1881 6.35mm duotight x Carbonation Cap RED for Gas
- PCO1881 6.35mm duotight x Carbonation Cap YELLOW for Liquid

This product is made from high quality engineering plastic and will last a very long time.  It's chemically resistant and also designed to resist impact and physical damage.

The thread specification on this product is the PCO 1881 (AKA Coke bottle thread).

From: Kegland

A bi-metal weldless thermometer with glass face. Ideal for fitting to your mash tun, hot liquor tank or kettle.

Features:
- Calibration screw so you can fine tune the temperature
- 304 stainless steel housing and probe
- ½” BSP thread and includes silicon and stainless steel washers.
- Temperature range -5C to 100C customised for brewing

Includes a slimline nut and 2 x silicone seals plus a stainless washer.

From: Kegland

Digital instant read thermometer with folding probe.

A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking lamb roast on the bbq! With a range of -50°C to 300°C you will be hard-pressed not to get a temperature reading.

Specifications:

• Range: -50°C ~ 300°C / -58°F ~ 572°F
• Resolution: 0.1°C
• Temperature Error: +-1°C (0~100°C)
• Power Supply: AG13 button battery x 1 (included)

Functions:

• ON/OFF
• °C/°F
• HOLD

From: Kegland

Mini Gauge 0-15psi (0-1.5bar) - for inline Duotight regulator or Blowtie.

This gauge is designed to fit into either our inline regulator or our Blowtie unit.  These can be used for water or gas.  

Specifications

• Pressure: 0-15psi (0-1bar)
• Graduations: PSI + Bar
• Material: Brass/Plastic/Copper Capillary
• Gauge Diameter: 20mm
• Probe Diameter: 7.8mm (designed to fit 8mm hole)
• Accuracy: These gauges are accurate to 10% of the whole pressure range.

WARNING:
Do not exceed gauge pressure.  If you exceed gauge pressure it will damage the capillary in the gauge and prevent the gauge from working correctly.  NEVER exceed the maximum gauge display pressure range.

Not tested or approved for pure oxygen.

If you are looking for a compact digital gauge with backlight illumination click here.

From: Kegland

The FermZilla All Rounder 30L is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical Unitank. So like the name says it's the "All Rounder".

If you want to use this product under pressure we would recommend that you use the pressure kit.

This kit includes:

• 1 x All rounder tank
• 1 x Stainless Steel Handle Assembly
• 1 x 304 stainless stand
• 1 x Airlock
• 1 x Pressure rated lid
• 1 x Digital temperature sticker
• 1 x Red 2.5bar pressure relief valve
• 1 x Graduation Sticker

Easy to Clean

This fermenter is made from super smooth PET so it's easy to clean. Just use a small scoop of PBW or similar and wipe it clean after a 5 minute soak. No scrubbing necessary.

Large 120mm Opening

The opening at the top is significantly larger then the older Snub Nose or other similar fermenters. This bad boy has 120mm opening so even brewers with large arms can easily get into the top making cleaning even easier.

Pressure Rated

This fermenter is rated up to 2.5bar so you can force carbonate just like a keg. You can use this fermenter for closed transfers and significantly reduce oxygen exposure.

Crystal Clear

The wall of the All Rounder is crystal clear so you can see what's going on inside. This makes it really easy to determine visually how the fermentation, how the yeast is flocculating etc.

Impermeable

The PET plastic is not permeable like some other fermenters made from PP or HDPE. The fermenter wall is a much better gas barrier keeping your product fresher for longer.

No Flavour and Aroma Carry Over

Other HDPE fermenters tend to be so porous they carry flavour and aroma from one batch to another.

Robust and Difficult to Damage

Impossible to smash like glass. The tank is impact resistant but light weight and easy to use.

IMPORTANT NOTE: This tank should not be used for hot liquid. Do not put liquids inside this tank over 50C. It will melt the tank. Also, while this tank comes pressure tested we recommend that every 2 years you re-hydro test this tank yourself.

From: Kegland
Diameter: approx. 352mm
Height: approx. 569mm (from stand base to top of airlock) or 614mm with stand reversed

74g CO2 Cannister | The Big Bulb | (5/8-18UNF Thread).

Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense. Perfect for parties where you're cranking out more than your average bear!

This CO2 Cartridge has a much larger thread than the standard 16g bulbs. It will require a different bushing if you are to use it with the 360 Core Mini Regulator. It does not suit other regulators in the KegLand range.

From: Kegland

Beer (black) connector with MFL thread for ball lock corny kegs.

This is a premium plastic ball lock connector designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the disconnect.

A stainless steel pump for the MKII 25watt High Temperature Magnetic Drive Pump from Kegland. 

This pump is constructed of food-grade materials and handles boiling wort. The impeller housing is made from polysulfone as it is a tough, food-grade plastic rated up to 120C. The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it’s not self priming, you must put the pump under the level of the liquid source. 

This is an extremely efficient 1.1amp pump which can be run continuously at elevated temperatures. 

The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.

An optional stainless steel pump head is also available.

Voltage: 240V-AC
Power: 25 watts
Max Head: 3.4m 
Max Capacity: 19L/min 
Fittings: 1/2" BSP

An excellent and economical way to be able to dispense beer from a keg when it isn't connected to your main kegging system. 

This simple to use plastic beer tap has a 6mm barb which will ideally suit 5mm ID beer line

Compact and versatile, the Mangrove Jacks Mini Keg delivers professional-grade carbonation in a portable 10L format. 

The stainless steel construction features sturdy handles for easy transport, while the ball lock cap enables pressure carbonation for experimental batches and small-scale brews.

Note: tap not included, but compatible with standard ball lock taps, making it an ideal addition to existing kegerator setups or a standalone solution for home brewers seeking flexibility and control.