Search results
260 results
Search results
Duotight - 9.5mm (3/8") Female x 1/2" Female Thread.
It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
Note: colour may vary.
From: Kegland
Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.
Now available in three pressure ratings:
Yellow - 17 PSI
Red - 35 PSI
Green - 65 PSI
Grey - 100 PSI
From: Kegland
No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.
The 3L can be used as a growler without the ball lock cap - perfect for filling up at your favourite tap room or brewery!
- Portable size
- Pressure carbonate (using the ball lock cap)
- Stainless steel body
- Handles for easy transportation
This replacement Keg Lid is suitable for Cornelius Type 19L and 9.5L Kegs.
Features:
- High quality stainless steel
- NEW Low2 O-ring (Yellow)
- Ring pull pressure relief valve
- Inside hook to attach hop bombs or a hop tube
Hop Tube Not Included*
What is Low2?
Low2 O-Rings are the new standard of homebrew kegs from KegLand. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.
From: Kegland
This manifold splits one line into four, each with a check valve. The check valve can also be removed if you want gas or water to move freely in both directions.
If you want to cap off certain lines, we would recommend using the Duotight - 8mm (5/16') Plug
Using a thin flat headed screw driver, simply slide/pop the black retainer tabs and remove the ball valve.
The Duotight 8mm 2-way manifold is ready with mounting capabilities out of the box using button head screws. But if you're going to mount it on a kegerator, we would suggest using the Duotight 8mm adhesive brackets (no drilling required).
Not suitable for liquids other than filtered water.
Looking for high quality push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.
Compatible with:
EVABarrier 4mm ID x 8mm OD line
EVABarrier 5mm ID x 8mm OD line
Red EVABarrier 5mm ID x 8mm OD line
Black Lightshield EVABarrier 4mm ID x 8mm OD line
Not compatible with 6.3mm ID x 9.5mm OD line
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.
These push-in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push-in fittings on the market, Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push-ins on the market have EPDM o-rings, let alone two! per push-in connection.
From: Kegland
Clear lubrication gel for keg parts such as o-rings, couplers, party pumps. Use with plastic and rubber components to avoid cracks and extend their life. Just a little of this goes a long way.
Food grade keg lube is completely safe to use with all components. FDA listed, high quality, tasteless and odourless grease.
-
Food safe lube for keg parts
-
Use with both rubber and plastic parts to avoid easy damage
-
Long lasting
-
Keeps for years
Specifications
-
Food Grade lubricant is safe for all home brewery needs
-
Keeps rubber parts soft and supple
-
Helps prevent leaks
Size: 1oz (28g)
Made in: Germany
Service temperature: -20C to +45C
From: Krome Dispense
Diptube (29 cm) Hosing for use with 3 L and 5 L Mangrove Jack's Mini Kegs.
New commercial 20 litre stainless kegs with D-Type spear included and rubber base and handle.
Premium brand new kegs rated to 130psi working pressure and made using a robotic orbital welding machine with super smooth welding marks making them easier to clean.
These kegs are also passivated, giving them a matte finish, to ensure superior rust protection.
The black rubber handles and base allows easier transportation and less scuffs on the floor of your cool room / kegerator.
Features:
- new, with D-Type spear
- maximum working pressure: 130psi
Dimensions: approx. 240mm Diameter x 570mm High
Stated Capacity: 20 litres
Serial Numbers: No
EVABarrier Black Lightshield 4mm ID x 8mm OD - 12m Roll.
This hose is suitable for a wide range of 8mm push in fittings, either for hydroponic/gardening use or outdoor keg dispensing where UV can damage the product.
Algae will always thrive if sunlight and an exposed nutrient solution is available. That is why it is crucial to use the correct hosing when it comes to hydroponic systems and or outdoor beer dispensing systems.
Prevention is the best cause of action when it comes to algae control. EVABarrier LightShield Black should be your number one choice of hosing when setting up your indoor or outdoor growing space.
UV stable hosing that will not kink or burst under normal use.
Specifications:
4mm Internal Diameter
8mm Outer Diameter
12m Roll
EVABarrier Hosing
Outer Barrier
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various John Guest, Duotight or other push in fittings. The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.
Inner Barrier
The inner barrier is made from a proprietary polymer that has excellent gas barrier and now with LightShield technology an excellent UV and Visible light blocking properties. The significantly better barrier properties means your beverage is better protected from oxygen and also has a better barrier to CO2 loss. So your beer will stay fresher for longer and not lose carbonation like other beer line types. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is significantly better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.
Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.
From: Kegland
Braided Reinforced Heavy Duty Silicone Hose - 10m Roll (12mm ID x 20mm OD).
Properties:
Odorless, tasteless and inert
Good Electrical and weatherability properties
Resists UV, Ozone, gases and moisture
Features:
Working Temperatures -60°C ~ 260°C
Working Pressure: 58-580 psi
Applications:
Commercial brewery hot and cold side transfers
Length: 10m
From: Kegland
Duotight - 6.5mm (1/4") x 8mm (5/16") Reducer.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.
From: Kegland
A 12m roll of EVABarrier line.
Looking to purchase by the meter, then you'll find it here.
This new EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.
Outer Barrier
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.
Inner Barrier
The inner barrier is made from a proprietary polymer that provides an excellent gas barrier. The significantly better barrier properties means your beer is better protected from oxygen and also has a better barrier to CO2 loss. So your beer will stay fresher for longer and not loose carbonation like other beer line types. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.
Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.
Dimensions/Options:
4mm internal (8mm external)
5mm internal (8mm external)
Pressure Rating (with 1.5 safety factor):
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)
Length: 12m
From: Kegland
This is a handy Intertap spout accessory that can be used for a large range of purposes, including attaching a counter pressure filler gun. This makes keg to keg transfers or cleaning out your beer lines easy.
Simply un-screw the regular nozzle and screw on the Liquid Ball Lock Post.
This product only fits Nukatap / Intertap taps.
Length: approx. 44mm (1.75")
Bore size: approx. 4.76mm (3/16")
Material: Stainless steel
From: Krome Dispense
A tower set with a brushed stainless double tap font and stainless Duotight shanks for your kegerator or kegging set up.
This duotight font kit includes:
- Double Tap - Brushed Stainless Steel Font Only
- 2 x duotight Compatible Short Shank
- 2 x Black Plastic Tap Handle
- Pre-Cut - 4mm ID x 8mm OD Evabarrier Beer Line and 5mm ID x 8mm OD Evabarrier Gas Line.
- 2 x duotight 6.5mm x 8mm push in fittings to easily join the beer line to the tap shanks
- 4 x Metric M5 stainless screws to secure the font to the fridge
- 1 x Font Seal/Gasket
Please note: taps are not included.
This font kit has been designed to suit the Series 4, Series X and Grand Deluxe Ranges of Kegerators.
The holes in the flange are pre-drilled so they can be attached easily using the metric M5 screws.
From: Kegland
The advantage of these clamps is that the inner circumference is free of any steps or gaps, making them very useful on gas and beer lines for leak proof lines.
Available in the following sizes:
- 10mm
- 10.5mm
- 11.9mm
- 13.3mm
- 17mm
You will need a Clamp Crimper tool for installation.
Oxebar 20L Amber PET Keg & Pressure Fermenter Tank
The Oxebar Mono Barrier Keg by KegLand. Beverages will last 3 x Longer than competitors single PET layer kegs.
Fit up to 3 of these badboys in your Series X.1, X or 4.1 (aka XL).
Or fit up to 6 of these in a Series X.1 Plus!
Not only will it protect your beer from damaging light (amber tinting) it will also keep your beverages fresher for up to 3 times as long due to the Mono Barrier PET Polymer Matrix.
It also comes with a floating dip tube with cage filter. Is easy to undo and stack on top of each-other upside down with disconnects attached.
The 20L Oxebar Amber PET Kegs come with a Green Pressure Relief valve rated to 65psi.
Dimensions:
640mm High
235mm Diameter
Other uses:
- Overflow Homebrew Keg
- Cleaning Keg for Commercial Keg Buyers
- In a pinch it could be used as a Pressure Fermenter Tank, although we would highly recommend going for a 30L FermZilla Pressure Brewing Kit for adequate single batch sizing as well as being able to get your hand inside to clean properly.
20L Brimful, ideally 19.5L fill for Kegging purposes.
If you are going to use it as a fermenter, we would recommend between 15L and 18L. When fermenting you will need a spunding valve such as the BlowTie Spunding Valve Kit OR Integrated Gauge BlowTie Kit (0-15psi).
Remember, a PRV is a not a spunding valve.
Includes:
1 x 20L Amber Mono Barrier PET Oxebar Keg
1 x Dual PCO1881 Lid assembly with Oxebar Black Handle
1 x Green Pressure Relief Valve for Keg Lids / MK4 Reg - 65psi
1 x 100cm Silicone Hosing with Stainless Steel float and Hop Filter Cage
1 x RED Multi Gas Post Plastic Carbonation Cap
1 x Yellow Multi Liquid Post Plastic Carbonation Cap
From: Kegland
Duotight - 9.5mm (3/8”) Female x 1/2 Male Thread.
It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
Note: colour may vary.
From: Kegland
This duotight 8mm (5/16") adaptor is designed to suit the Nukatap Mini and will allow you to couple your Nukatap mini to a wide range of other 8mm(5/16") duotight fittings or be able to attach to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adaptor. The combination of the two fittings prevents the tap spinning around while in use.
Other Parts Sold Separately
Ball Lock Beer Duotight Disconnect - Flow Control
From: Kegland
This manifold splits one line into two, each with a check valve. The check valve can also be removed if you want gas or water to move freely in both directions.
If you want to cap off certain lines, we would recommend using the Duotight - 8mm (5/16') Plug
Using a thin flat headed screw driver, simply slide/pop the black retainer tabs and remove the ball valve.
The Duotight 8mm 2-way manifold is ready with mounting capabilities out of the box using button head screws. But if you're going to mount it on a kegerator, we would suggest using the Duotight 8mm adhesive brackets (no drilling required).
Not suitable for liquids other than filtered water.
Looking for high quality push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.
Compatible with:
EVABarrier 4mm ID x 8mm OD line
EVABarrier 5mm ID x 8mm OD line
Red EVABarrier 5mm ID x 8mm OD line
Black Lightshield EVABarrier 4mm ID x 8mm OD line
Not compatible with 6.3mm ID x 9.5mm OD line
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.
These push-in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push-in fittings on the market, Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push-ins on the market have EPDM o-rings, let alone two! per push-in connection.
From: Kegland