Search results

Mini duotight Regulator - 6.35mm (1/4'') Suits 16g and 74g Bulbs

Perfect introductory regulator for mini keg / oxebar keg set ups. This compact unit can take 16g and 74g CO2 bulbs. Travellers have never been so easy!

This regulator features a 6.35mm Duotight compatible barb, meaning you can connect just about anything within a matter of seconds. The most common easy attachment to your ball lock kegs would be adding 1 x Duotight 6.35mm (1/4") x Ball Lock Disconnect - (Grey + Red Gas).

If however you want to be a bit more protective with your beer not shooting back into the regulator you could minimise the damage by using a 6.35mm check-valve and some hosing to your ball lock disconnect.

Suitable Gas Cartridges are:
16g Cartridge / Bulbs
74g Big Bulb CO2 Cartridge 5/8-18UNF Thread

Please note, once you get liquid shoot back through it, it's no longer functional. Be extremely careful with overfilling your kegs or tipping them over when the gas has run out.

This regulator is capped at dispensing 30psi to ensure you do not accidentally over carbonate or exceed your kegs pressure rating. The gauge, however, shows up to 60psi just in case by heat ingress / expansion that it does not break the gauge.

From: Kegland

CM Becker are high quality disconnects made in Germany and assembled in  the USA. They are:

• NSF approved, 
• use FDA approved materials,
• and have SK approved materials(European).

This is a gas disconnect for a Cornelius or Firestone ball lock keg with a 1/4 inch MFL connection. Can be used in conjunction with a Barbed Swivel Nut - 1/4 inch or Duotight 8mm - MFL Connector. 

A replacement dip tube (gas in) for cornelius-style kegs. Includes o-ring.

Length: approx. 40mm

This really handy device is great for filling kegs, keg to keg transfers or fermenter to keg transfers.

Fantastic for use with Fermentasaurus or other pressurisable fermenters.

Simply attach this device to the output gas post of your Keg then when the keg is full it will prevent further liquid exiting the gas post. This means you can literally set and forget and fill kegs automatically without the risk of kegs overflowing all over the floor.

For even better results we recommend this product to be used with the Duotight - BlowTie Diaphram Spunding Valve - Adjustable PRV.  This blowtie spunding valve will also enable to to apply head pressure to the keg meaning you can control the flow speed but also reduce the foam generated in the filling process particularly for carbonated beverages like beer.

This flow stopper includes:

• 2 x duotight 8mm x 5/8 push in fittings
• 1 x ball float
• 1 x stainless spring
• 2 x straight 8mm joiners
• 1 x acrylic sight glass (with 5/8 male thread on either side)

Duotight 6.35mm (1/4") x Ball Lock Keg Connector (Grey-Red/Gas).

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

This particular ball lock disconnect has been designed to suit:
6.35mm duotight compatible barbs. Like the Duotight Picnic Tap or Carbonation Caps (Yellow, Red, Stainless).

Some of the features include:

1. Duotight push in
These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!

2. Compact
The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.

3. Overmoulded Poppet
The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.

4. Tool-Less Disassembly
Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.

5. Extreme Chemical Resistance
No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.

6. Toughness
This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!

7. High Flow
The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

From: Kegland

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost. 

The Kegmaster Premium XL 2 Tap Kegerator from Keg King is a premium kegerator full of features for a professional experience when serving beverages at home.

Get up to 2 kegs on tap and save space as well as cooling times! 

The Kegmaster Premium can store up to 4 x 19 L ‘Corny’ kegs giving you the option of conditioning 2 kegs while serving from 2. Alternatively, the Kegmaster Premium XL can fit 2 x 20 L PET Kegs + 1 x 19 L ‘Corny’ keg, 3 x 20 L SS Commercial Kegs, or 1 x 50 L SS Commercial Keg.

The internal volume has increased from previous versions to an impressive 160 L capacity while keeping the kegerator compact enough to fit in typical ‘kegerator-size’ spaces. 

The Kegmaster Premium XL also includes the UltraTap for laminar flow and the perfect pour! Also includes are built-in, low-profile rollers so you can easily move your kegerator in position and a gas cylinder bracket that can be installed at the back for efficient storage of your CO2 cylinder.

With a preassembled font and gas line, there is minimal assembly required, meaning you can get round to serving your beer or other carbonated beverage quickly and with ease. 

Features:

• Built in rollers for easy moving – removeable and upgradeable to castors.
• Reversible Door – orient to open how you like.
• Font Fan with speed control – keeps your font cold and runs more quietly.
• Internal light – handy for inspecting keg connections.
• Suitable for free standing installations – can also be installed under counters.
• R600a Refrigerant – environmentally 

The kegerator is easy to set up and you only need to add a C02 Cylinder, pop in some kegs and you're good to go.

What's Included

• Kegmaster Premium XL Kegerator
• 2 x 19 L ‘Corny’ Kegs
• Preassembled 2-tap font and gas line
• MKX Regulator

Specifications

Height: 850 mm with rollers 830 mm without rollers 890 mm with castors
Width: 610 mm
Depth: 660 mm
Internal Height: 724.9 mm
Internal Width: 511.9 mm
Internal Depth: 405.1 mm
Volume: 160 L
Weight: 43 Kg
Power: 220-240V 50Hz
Climate Class: T
Refrigerant: R600a (40g)
Insulation: Cyclopentane
Packaged dimensions: H 88 cm W 66 cm D 69 cm

Short Shank - Stainless Steel (Duotight compatible).

A seal kit for the Mini 360 Core Actuator Regulator. Contains the o-rings for the piston, the red inlet washer, MK4 seat assembly o-ring, 2 x barbMFL outlet o-rings and x thumb screw o-rings.

For instructions on replacing the seals and/or general maintenance please refer to the product manual here.

From: Kegland

Hoses play a huge role in draft beer dispensing. They carry gas from the tank to the coupler and beer from the keg right up to the faucet. These pipes are of soft, flexible but durable material. They are usually of Vinyl and Polypropylene. The hoses are also part of glycol pythons.

Hoses are connected through adapters and barbs to form the entire dispensing system. The length really depends on how far your serving point is from the keg. You might have to shorten or cut out from a large bundle. For any of this, you require a Hose and Tubing Cutter.

This cutter is sturdy and sharp that cuts right through the hose in a jiffy without leaving any rough edges too.

• Material: Plastic
• Finish: Raw
• Color: Black

Looking for a smaller option, you'll find one here.

From: Krome Dispense

Duotight 8mm x Ball Lock Disconnect (Black + Yellow/Liquid).

This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.

The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.

This particular ball lock disconnect has been designed to suit 8mm outside diameter beer/gas line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

Some of the features include:

1. Duotight push in
   These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
   
   
2. Compact
   The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
   
   
3. Overmolded Poppet
   The overmolded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
   
   
4. Tool-less Disassembly
   Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
   
   
5. Extreme Chemical Resistance
   No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmolded poppet.  This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
   
   
6. Toughness
   This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
   
   
7. High Flow
   The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.

From: Kegland

This handy tool is exactly what you need to fit numerous dispensing applications.

This new 7 in 1 tool is also suitable for duotight fittings so it's been improved since the older 5 in 1 tools.

Use it for these tasks:

1. Nut behind your taps (27mm Spanner)
2. Ring collar connecting your tap to the shank
3. Attaching your type 30 Regulator to your CO2 Bottle
4. FFL fitting to tighten/undo an MFL connection. (e.g. Barbed fitting on CO2 Regulator)
5. The handy dandy bottle opener
6. Remove 8mm tubing from duotight fittings
7. Remove 9.5mm tubing from duotight fittings

From: Kegland

Soda Carbonator - Keg Reactor Lid

This is the easy way to have continuous soda water on tap. Don't waste your time with Sodastream or other more expensive carbonators. This simple device makes it easy to have continuous carbonated soda water fed from your mains water supply.

Please see the description below on how to set this up.

Nothing is more refreshing than having your own soda water on tap at home. Sodastream units are great but filling up those tiny 1L bottles is a pain and those small CO2 cylinders run out fast and are expensive to swap. Solve this problem once and for all with the Continuous Soda Carbonator Keg Reactor Solution.

KegLand has invented this really simple to use lid that attaches to a standard ball lock keg. You can use one a 19L ones or a 9.5L keg.

All you have to do is:
1. Position the keg inside your fridge, kegerator, coolroom, or anywhere cold (ideally below 5C).

2. Attach your dispensing tap of choice to the soda water outpost.

3. Attach your gas to the gas in post.

4. Set your CO2 regulator that is connected to the gas post to 30-50psi. (higher pressures will give you more carbonation so set your regulator pressure to achieve desired carbonation level).
NOTE: It's recommended to use a check valve in your CO2 line. We recommend this Duotight check valve or this one that is integrated into the gas ball lock disconnect.

5. The first time you use this unit it's a good idea to purge the air from the headspace of the keg. To do this pull the PRV on the keg lid about 5 times for 2-second bursts.

6. Connect the mains water to the water inlet post on the lid of the keg. We recommend using a check valve for this application to prevent soda water going back into your house mains. We recommend this Duotight check valve. Also, it's a good idea to reduce your mains water pressure. Most domestic mains water pressure is over 100psi. For this unit to work well the mains water pressure should be 10-15psi higher than your regulator set pressure (from step 4). To regulate your water pressure we would recommend the use of the Inline Regulator Inline Regulator.

If you are looking for a mains water connection, you could use our diverter valve (this is not a stainless steel unit) with some 1/4" PE Water Line and a Duotight 6.5mm x 8mm Reducer.

That's it. This simple unit will give you continuous soda water connected to your mains water. Great for a bar cafe, restaurant or just at home.

This is capable of carbonating 10 Litres per hour if you have sufficient ability to cool the water. The colder the water and the higher the gas pressure (from step 4) the higher the carbonation level you will have. If you want to have extremely high soda water production speeds you can pre-chill the water by having one (or several) keg/s placed inline in front of the carbonation reactor. This will help pre-cool the water before it enters the carbonator. Alternatively, you can use a chiller such as the G40 glycol chiller to pre-chill the water before it enters the carbonator. If you do this you can increase your carbonation rate to over 30 litres per hour.

From: Kegland

CM Becker are high quality disconnects made in Germany and assembled in  the USA. They are:

• NSF approved, 
• use FDA approved materials,
• and have SK approved materials(European).

This is a liquid disconnect for a Cornelius or Firestone ball lock keg with a 1/4 inch MFL connection. Can be used in conjunction with a Barbed Swivel Nut - 1/4 inch or Duotight 8mm - MFL Connector. 

This new EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.

Outer Barrier
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.

Inner Barrier
The inner barrier is made from a proprietary polymer that provides an excellent gas barrier. The significantly better barrier properties means your beer is better protected from oxygen and also has a better barrier to CO2 loss. So your beer will stay fresher for longer and not loose carbonation like other beer line types. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.

Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.

The amount of beer line required to achieve a balanced system and avoid a glass full of foam depends on a number of different variables. Here is a link to a calculator that will help you determine the amount of line required to help you pour foam free beer.

Price is per metre - order as many metres as required

6.3mm internal (9.5mm external)

Pressure Rating (with 1.5 safety factor):
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)

From: Kegland

This bracket is used to mount a Nukatap Mini in either 6.35mm or 8mm to a cooler/esky/chilly bin or your home refrigerator or bar fridge. No need to drill any holes!

This bracket is compatible with walls/fridges that are up to 90mm thick. It can be adjusted to have the wing nut clamp in either direction, simply unscrew the flange piece from the threaded rod, then unscrew, then thread from the opposing side.

Please note: This item does not include the Mini NukaTap or Shank pieces. It is simply the stainless steel bracket.

From: Kegland

Beer (black) connector with MFL thread for ball lock corny kegs.

This is a premium plastic ball lock connector designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the disconnect.