259 results
The Type 50 for Nitrogen - MK4 Dual Gauge gas regulator is the only regulator you'll ever need to buy for a deluxe nitrogen stout/cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both PSI and KPA.
The most common problem with other regulators sold on the market was that contamination would occur through the seat and cap assembly within the regulator. This has now been solved with a second sintered filter on the underside of the seat assembly, within the regulator, to block contaminants.
New and Improved Features:
- Stronger Steel Gauges made from thicker steel
- Triple scale gauges in kPa, Bar and PSI
- New Colour Coded PRV valves.
- New M6 Mounting Holes for easy Mounting
From: Kegland
Black Short Shank - Stainless Steel - 6.5mm (1/4'') tail suits Duotight 6.5mm Reducer.
Black stainless steel duotight compatible short shanks are the perfect addition to your black phantom font tower. Couple this with the black Nukatap Stealth Bomber for the ultimate sleek and stealthy draught setup for your kegerator or home bar.
If you still want to use a stepless clamp. Good news! You still can, just use needle nose pliers, boiling water and a positive mindset to get the hose over the barb.
These short shanks are suitable to attach taps to our kegerator fonts, and can be used to replace the short shank on any 3" diameter tower.
Item Includes:
- Blank Stainless Steel Shank with a 6.5mm duotight compatible barb
- Ring collar
- Nut
- Right angle font collar to suit font
- Shaped internal collar to suit font
NOT INCLUDED but highly recommended for 8mm OD beer line: Duotight - 6.5mm x 8mm Reducer
Common tips for cutting your beer hose for optimum flow resistance:
EVABarrier Hose - 4mm ID x 8mm OD = Reccomended 1.5m to 2.1m
EVABarrier Hose - 5mm ID x 8mm OD = Reccomended 2.0m to 3.2m
From: Kegland
Worn down your washers and seals from filling oodles of sodastream bottles? Then you may want to purchase some extra washers and o-rings
Includes:
1 x Nylon Regulator Washer
1 x Sodastream Black Washer
5 x Bleed Valve O-Rings
Please note these items are not sold individually, they are sold as a seal kit. Seal colour may vary.
From: Kegland
PCO1881 Male x 2 Inch Tri-Clamp (POK)
For all you hop bongers out there. We have an end cap for all end caps! The Polyketone 2 Inch Tri-Clover x PCO1881 Male Thread (PET drink bottle thread like a Schweppes / Coca Cola bottle).
Perfect to use along side the 2" Tri-Clover Hop Bong
- PCO1881 PRV Cap with a Red 35psi Pressure Release Valve
- PCO1881 6.35mm duotight x Carbonation Cap RED for Gas
- PCO1881 6.35mm duotight x Carbonation Cap YELLOW for Liquid
This product is made from high quality engineering plastic and will last a very long time. It's chemically resistant and also designed to resist impact and physical damage.
The thread specification on this product is the PCO 1881 (AKA Coke bottle thread).
From: Kegland
Duotight - 8mm x 9.5mm Reducer.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.
From: Kegland
Jazz up your Kegerator or commercial beverage dispensary with these stylish decal holders. Made from plated chrome plastic, with soft padding components as to not scratch your taps when attached are surely there to catch your eye.
These decal holders will fit any tap system. Their unique clamp on design means you don't have to take off your tap to put these on. You will need a phillips head screw driver to remove the two screws.
As the name says, this will fit a 82mm Diameter Decal/Sticker/Label.
From: Kegland
Black NukaTap Shank Threaded Collar Piece Only
This is the moveable piece that tightens the NukaTap to the Short / Long Shank but black in colour.
If you are wanting to mix up your Kegerator / Draught System with a bit of black flair, this would be a great place to start if you already have Stainless Steel Shanks and don't want to spend money on an entire shank again.
It is important to note to be gentle with these black parts as scratches will show up more clearly compared to the Stainless Steel look versions.
It does not come with the circlip from the Shank as it is a replacement part for aesthetic purposes.
Note: shank not included.
From: Kegland
Replacement Soft Red Easy-Tight Washer for the MK5 Kegland Regulator only.
Specifications:
17.5mm x 11mm x 3.5mm
Not suitable for any other regulator on the market.
From: Kegland
A nylon regulator washer to fit the range of MK regulators (MKI, MKII, MKIII & MK4). Plumbers tape not required. Simply screw your regulator in tightly, the washer will make a complete seal.
From: Kegland
74g CO2 Cannister | The Big Bulb | (5/8-18UNF Thread).
Typically you will use about 6g per litre of CO2 for carbonating and/or 6g per liter to dispense. Perfect for parties where you're cranking out more than your average bear!
This CO2 Cartridge has a much larger thread than the standard 16g bulbs. It will require a different bushing if you are to use it with the 360 Core Mini Regulator. It does not suit other regulators in the KegLand range.
From: Kegland
Your all-in-one solution for kegging. This lightweight, durable aluminium cylinder is pre-filled with 3.5kg of food-grade CO2, ready to carbonate and serve your homebrew with reliability and ease.
Not available for shipping. Store Pick Up Only
This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost.
RAPT Temperature Controlled Fermentation Chamber
This fermentation chamber has been designed to heat and cool your entire fermenter. This is the ideal scenario as the whole fermentation vessel is placed in a temperature controlled environment which gives you the most even temperature and most precise control of your fermenter.
Many home made products can greatly be improved with perfect temperature control. The RAPT Temperature Controlled Fermentation Chamber gives you an electrically efficient means of setting, monitoring and controlling temperature which is perfect for Beer Making, Wine Making, Salami Making, leavening bread, fermenting yogurt, kombucha, germinating seeds, growing sprouts, kimchi, sauerkraut, olives, cheese, making spirit washes. Accurate temperature control is the key to getting reliable and repeatable results.
From -2°C up to 50°C all at the touch of your fingertips!
The control panel comes complete with an integrated colour TFT screen, the integrated secondary regulator that can be used to regulate gas into the chamber with our Inline Regulator with an integrated gauge or alternatively this can be switched over to the Gauge integrated BlowTie unit to regulate residual pressure in your fermenter. The 4 button colour display conveniently shows a log of historic temperature graphs, allows you to start, set/stop temperature profiles and gives you access to other critical information for that particular fermentation.
For more accurate readings of the core temperature of your fermenter. We highly recommend using a thermowell like our 60cm duotight thermowell with the 2m probe extension for the RAPT Fermentation Chamber.
Perfect as a Kegerator too!
This multi purpose chamber can also be used as a kegerator. In particularly cold climates where the ambient temp is below zero, this chamber can warm your kegs and prevent them from freezing. This chamber also has a higher keg storage capacity than a conventional kegerator that takes up the same footprint. This unit can hold 4 x 19L kegs on the floor and has enough headroom that you can also fit another layer of 9.5L half size kegs above this. To fit beer taps, you can drill your own holes through the door.
Convert to Display Chamber
This Chamber comes with brushed stainless steel PU foam-filled door. If you want to upgrade to a glass door the double glazed glass door can be purchased separately and switched over - coming soon.
What is RAPT?
RAPT is a dedicated Internet of Things (IOT) Hub for fermentation logging and control. It's a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involved different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notifications in the off instance that something doesn't go to plan.
Specifications:
Integrated Heating: 50watt Heating Power
Cooling Capacity: 300watt Cooling Power
Max Power Consumption: 225 Watts
Refrigerant: r600a
Connectivity: Wifi (802.11) and Bluetooth
Temperature accuracy: +/- 0.1C
Temp Resolution: 0.1C
Integrated Screen: 2.8inch (diagonal) 320 x 240 Colour LCD TFT Active Matrix
External Dimensions:
Width: 540mm
Depth: 610mm
Height: 1760mm
Internal Dimensions:
Width: 440mm
Depth: 500mm
Height: 1300mm
To see the dimensioned drawings on this part click here.
Why buy an insulated fermentation chamber over a glycol chiller?
Typically in the past, some customers have needed to resort to glycol chillers to chill fermenters but this represents several issues:
For these reasons KegLand has developed the worlds first dedicated RAPT enabled fermentation chamber that can cool down to -2C and heat up to 50C even in hot and cold weather.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/
"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device. It also gives you the added functionality of push notifications to your mobile device."
From: Kegland
Diptube hosing (55cm) for use with 10 L Mangrove Jack's Mini Kegs.
The MFL Tap Shank Adapter is what you need to connect your draft tap directly to your MFL disconnect. These allow you to make a very compact portable setup.
We recommend using one of the Flow Control Nukatap with this adapter as this provides some restriction of the flow but they will also work with Intertap, Nukatap and other brands of taps. A nylon washer is also recommended between the disconnect and the shank adapter.
Please bear in mind that due to the compact size there is not enough space to accommodate an auto spring return so it is not compatible that setup.
Note: does not include tap or disconnect.
From: Kegland
NukaTap Mini - Wall Mount Shank Kit (Duotight 8mm).
This shank kit is specifically designed to suit the Nukatap Mini taps and will allow you to connect the Nukatap Mini to a cooler box, kegerator, keg fridge, coolroom wall or any other flat surface.
New Innovative Shank Design
Unlike other shank kits this shank kit doesn't use a bulky 5/8" bar stock. The issue with 5/8 bar stock is it acts as a heat sink and due to the fact that most other shanks sit inside the insulated wall this results in a substantial amount of warm beer coming out of the tap before cold beer starts flowing. This means a "first pour foam" effect which wastes beer, can result in sour beer, and ultimately negatively effects the quality of the beverages being served. This new design has the beer line feed all the way directly up to the back of the tap greatly reducing the volume of non-refrigerated beer.
No Spinning Shanks
If you have ever installed a traditional 5/8" long shank you will know how frustrating it is when you use the tap and the tap starts rotating. This new design of shank alternative uses three screws that lock the tap into a fixed position and prevents the taps from rotating. If you loosen the 1/2" stainless tap collet you can still have the flexibility to rotate the tap to any orientation but once the collet is tight interlocking teeth on this shank kit and the Nukatap Mini will hold the tap permanently in the correct orientation.
Easy Installation
Unlike other long shank kits, this kit doesn't require large 22mm hole saw to be used to drill through the wall. As no shank is required, only a hole large enough to accommodate the beer line is required. As a result only an 8mm conventional drill bit is all that is necessary and this makes the installation easier. If, however, you are concerned about the small amount of beer sitting in the beer line in the wall not being refrigerated you can also shell out a larger diameter of foam on the inside of the wall to allow cold air to circulate around the beer line thus reducing the non-refrigerated beer in the line even more. If you wanted to do this a Step Drill Bit is the best tool for the job.
Any Wall Thickness
Other shank kits will require you to purchase a specific length shank for a specific wall thickness. This new shank alternative will fit any wall thickness. If you have wall thicknesses that are less than 80mm thick then you can use the included screws that have "snap off" points so you can simply cut the screws down to the desired length. If, however, the wall is thicker than 80mm you can simply purchase a conventional screw from the hardware store and screw the shank kit to your wall. If the substrate is firm enough you may not even need to go all the way through the wall, so a common 30mm long screw may be all that is required.
Specifications:
NOTE: Nukatap Mini is SOLD SEPARATELY.
Now updated with the all new duotight 8mm Ball Lock Disconnect (Grey+Red/Gas)
This kit has been designed for simplicity and ease of putting together.
This Kit Contains:
1 x BlowTie Spunding Valve Gen 2 with 0-15psi Integrated Gauge
1 x Duotight 8mm (5/16") x Ball Lock Disconnect (Grey+ Red/Gas)
1 x Rigid 8mm Plastic Joiner
All new compact BlowTie Spunding Valve Gen2 Integrated Kit. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.
The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.
This BlowTie unit can be easily disassembled for cleaning using a Phillips head screw driver.
Designed to suit 8mm OD (5/16") Evabarrier Tubing.
Specifications:
1. Suits pressures 0-15psi (but with different gauges the unit can go above 100psi)
2. Made from food-grade acetal
3. Stainless screws
4. 8mm (5/16") push on both sides
If you are looking for a compact digital gauge with backlight illumination click here. This should only be used on a blowtie if you have excess tubing to stop liquid reaching the gauge. If liquid enters the digital gauge it will break.
A tool for cutting hose and tube, with a stainless steel blade.
From: Krome Dispense
A tower set with a brushed stainless triple tap font and stainless Duotight shanks for your kegerator or kegging set up.
This duotight font kit includes:
Please note: taps are not included.
This font kit has been designed to suit the Series 4, Series X and Grand Deluxe Ranges of Kegerators.
The holes in the flange are pre-drilled so they can be attached easily using the metric M5 screws.
From: Kegland
When not connected to another JoinTech Connector this will not allow any flow. Incredibly useful on Pump or Glycol systems.
Compatible with:
JoinTech Male Connector with Auto Shut Off x 1/2 Inch BSPT
JoinTech Male Connector with Auto Shut Off x 13mm Barb
Features:
From: Kegland
