Sort by:
A curved brush to make it easier to clean the shoulders of a demijohn.
Approximately 60cm from the top of the handle to the curve in the brush.
A solid silicon bung with a diameter of 32mm across the top, tapering to a diameter of 28mm at the bottom.
Fits the 5L Glass Jar Demijohn with Mecanicco Swing Lid perfectly allowing an airlock to be attached so it can be used as a fermenter.
Does not fit the 5L Glass Jar Demijohn with Screw Cap/Lid.
A carbonation or aeration diffusion stone, either 0.5 or 2.0 micron. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer. The barb fits 1/4" (6.35mm) ID tubing.
If you're looking for diffusion stones with MFL thread, you'll find them here.
From: Kegland
A carbonation or aeration diffusion stone, 2.0 micron, with MFL thread. This can be used as a way to aerate your wort prior to fermentation, or to speed up carbonation of the finished beer.
If you're looking for barbed diffusion stones, you'll find them here.
From: Kegland
The DigiBoil (digital turbo boiler) is a quality made 304 grade stainless steel turbo boiler.
The 35 litre size is the total rated size to the brimful. If using the DigiBoil as a brew kettle do not fill to greater than 25L-30L to ensure you have sufficient head space to comfortably contain the hot break and avoid a boil over.
The boiler has a quality made stainless tap with stainless barb and 1/2 inch thread so you can attach the wide range of half inch fittings such as camlocks.
The unit comes with a concealed element for easy cleaning.
The digital display can be set from 0℃ and up to 140℃ with 1℃ increments and 1℃ resolution on the display.
The side of the boiler is pre-marked with graduations in litres and gallons that are accurate to +/- 1 litre.
- Litre and Gallon Graduations
- Stainless steel tap with barb and 1/2 thread
- Dual element control (so you can adjust the power from 500watts, 1900watts or 2400watts)
- Easy to use
- Great for use as a hot liquor tank, boiler, or hot water urn
- Concealed element for easy cleaning
- Can also be used for sous vide cooking
Want to save some power?
You can also purchase the neoprene jacket/parka that fits this unit here. This will reduce your heat loss by about 200-300 watts.
This digital turbo boiler is a quality made 304 grade stainless steel turbo boiler.
The 65 Litre size is the total rated size brimful, so typically if you are using this as a beer boiler you would probably only fill it up to 50-60L so you had 5-10 litres of head space to boil comfortably.
The boiler has a quality made stainless tap with stainless barb and 1/2inch thread so you can attach the wide range of other half inch fittings such as camlocks and many other fittings that we can supply.
The unit comes with a concealed element for easy cleaning.
The digital display can be set from 0℃ and up to 140℃ with 1℃ increments and 1℃ resolution on the display.
The side of the boiler is pre-marked with graduations in litres and gallons that are accurate to +/- 1 litre.
- Litre and Gallon Graduations
- Stainless steel tap with barb and 1/2 thread
- Triple element control (so you can adjust the power from 500watts, 1000watts, 1500watts, 2000watts, 2500watts, 3000watts and 3500watts! )
- Easy to use
- Great for use as a hot liquor tank, boiler, or hot water urn
- Concealed element for easy cleaning
- Can also be used for sous vide cooking
Dimensions: 42cm diameter x 74cm high
You can also purchase the neoprene jacket/parka that fits this unit here. This will reduce your heat loss by about 200-300 watts.
Note: Out of the box this unit needs a 15amp power socket. With that said you can convert this to a 10amp compatible device in two different ways. You can either:
1. Purchase a device like an Ampfibian Mini 15amp to 10amp adaptor. If you do this you will be able to run the Digiboil, however if you turn on all three elements you will trip the circuit breaker. For this reason you will only be able to use a maximum of 2 of the elements. (not all three)
2. Alternatively you can remove the cord and replace the cord on this device with a 10amp cord, but if you do this you will need to disconnect the larger element resulting in 1300watts less power.
Digital instant read thermometer with folding probe.
A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking lamb roast on the bbq! With a range of -50°C to 300°C you will be hard-pressed not to get a temperature reading.
Specifications:
- Range: -50°C ~ 300°C / -58°F ~ 572°F
- Resolution: 0.1°C
- Temperature Error: +-1°C (0~100°C)
- Power Supply: AG13 button battery x 1 (included)
Functions:
- ON/OFF
- °C/°F
- HOLD
From: Kegland
Electronic scales for measuring additions such as brewing salts and hops (0.1g to 1000g).
Adjusting your pH with brewing salts has never been easier than with this tiny pocket rocket scales. Flip the lid and get weighing because we wouldn't start brew day without one.
Specifications:
- Powered by 2 AAA batteries (batteries not included)
- Durable and compact digital pocket scale for easy portability
- Weighs items up to 1000 grams in 0.1 gram increments
- Easy-to-read, backlit LCD display; intuitive, flip-open lid protects the smooth, stainless-steel weighing surface
From: Kegland
Made of highly accurate sensors, the 40kg Home Brew Digital Scale is your best companion prior to your brew day routine. Don't take the small kitchen scales that are hard to read with a giant bucket on it. Get yourself some serious scales for some serious business!
It runs on a rechargeable battery which means you can use it anywhere you like. The battery is fully charged within 2 hours and can run up to 140 hours just from a single charge.
NOTE: All scales used for commercial purposes are required to be calibrated.
Over charging for more than 2 hours can lead to battery failure, whereby the unit would have to be wired to turn on.
Specifications:
- Power: AC or rechargeable battery
- Voltage: 220v 50Hz/60Hz
- Battery required: 4V 6AH recharge battery
- Capacity: 40kg
- Increment: 1g
- Precision: 1/3000F.S
- Display windows: Weight (5 digits), Unit price (5 digits), Total Price (6 digits)
- Platform size: 33.5x23.5cm
- Product size: 34x33x8cm
- Colour: Black (unbranded)
- Battery: 4v Lead Acid Battery (Charge for two hours at a time, do not over charge)
From: Kegland
A replacement dip tube (gas in) for cornelius-style kegs. Includes o-ring.
Length: approx. 40mm
A replacement liquid (long) stainless keg dip tube suitable for Kegland Corny Kegs - 19L. Can be cut down to suit 9.5L. Comes with a dip tube o-ring.
Note: there are ridges (sometimes called ears) at the top for matching post holes, which make it unsuitable for corny kegs without these matching post holes.
Looking for just the o-ring? You'll find it here.
Distiller's Enzyme Alpha-amylase is a bacterially-derived, powdered alpha-amylase enzyme for breaking down (or liquefying) gelatinised starch to yield short chain dextrins and simple sugars prior to saccharification with glucoamylase and fermentation by yeast.
Instructions
Bring your starch substrate slurry to the boil and simmer for 30 minutes, then turn off the heat and allow to cool to 80°C (176°F) or just below. Add enzyme and stir well and then cover (or hold at 65-80°C (149-176°F)) and allow to stand for 60 minutes.
Net Weight: 12 g
Sufficient for: Up to 7.5 kg Liquefied Starch For Fermentation Volumes Up To 25 L
Glucoamylase is a fungal-derived enzyme which breaks down dextrins into simple sugars.
For use in mashing of starch-based substrates, such as raw grains and potato, for fermentation of alcohol to make distilled spirits. Can also be used for maximising yield when mashing malted grains using natural, diastatic enzyme activity.
Net Weight: 12 g
Sufficient for: Up to 10 kg Liquefied Starch For Fermentation Volumes Up To 25 L
Temperatures: Standard Temperatures
Temperature Tolerance: 30-65°C – Optimum 50-60°C
A yeast nutrient blend especially formulated for enhanced congener production during fermentation of alcohol for dark spirits.
Dosages are sufficient for up to 25 L (6.6 US Gal) fermentation.
Sugar Wash
ABV: Up to 15%
Dosage: 75 g (2.6 oz) / 70 ml (2.5 US fl oz) / 4 Bottle Caps
Fruit Mash
ABV: Up to 15%
Dosage: 50 g (1.8 oz) / 45 ml (1.5 US fl oz) / 3 Bottle Caps
Molasses Wash
ABV: Up to 12%
Dosage: 50 g (1.8 oz) / 45 ml (1.5 US fl oz) / 3 Bottle Caps
Mixing Instructions:
Shake well before use. Add with yeast and stir well to dissolve, leave to
ferment according to instructions specified for selected yeast strain.
Ingredients: Yeast nutrients, antifoaming agent, vitamins, trace minerals.
A yeast nutrient blend especially formulated for reduced
off-flavour production during fermentation of alcohol for light/white spirits.
Dosages are sufficient for up to 25 L (6.6 US Gal) fermentation.
Sugar Wash
ABV: Up to 15%
Dosage: 150 g (5.3 oz) / 190 ml (6.5 US fl oz) / 11 Bottle Caps
Potato Wash
ABV: Up to 10%
Dosage: 100 g (3.5 oz) / 130 ml (4.5 US fl oz) / 7 Bottle Caps
Molasses Wash
ABV: Up to 12%
Dosage: 100 g (3.5 oz) / 130 ml (4.5 US fl oz) / 7 Bottle Caps
Mixing Instructions:
Shake well before use. Add with yeast and stir well to dissolve, leave to
ferment according to instructions specified for selected yeast strain.
Ingredients: Yeast nutrients, antifoaming agent, vitamins, trace minerals.
A particularly clean active dried yeast, especially selected for gin production. This strain gives a neutral congener profile, making clean and crisp spirit alcohol perfect for showcasing your botanicals.
Net Weight: 20 g
Sufficient for: Up to 25 L
Alcohol Tolerance: 18% ABV
Attenuation: 70-100% (Low-High)
Flocculation Rate: Low
A specialist active dried rum distiller’s yeast. This strain produces an optimum congener profile for full-flavoured, smooth and rounded rum spirit.
Net Weight: 20 g
Sufficient for: Up to 25 L
Alcohol Tolerance: 15% ABV
Attenuation: 70-100% (Low-High)
Flocculation Rate: Medium
A specialist active dried vodka distiller’s yeast with an extremely low congener profile for the production of rounded vodka spirit with a clean authentic finish.
Net Weight: 20 g
Sufficient for: Up to 25 L
Alcohol Tolerance: 18% ABV
Attenuation: 80-100% (High)
Flocculation Rate: Low
A specialist active dried Whiskey distiller’s yeast producing an optimum congener profile for elegant, well-rounded and refined whiskey spirit for oak aging.
Net Weight: 20 g
Sufficient for: Up to 25 L
Alcohol Tolerance: 15% ABV
Attenuation: 90-100% (High)
Flocculation Rate: Medium
A lead free brass adaptor that screws into the base of a condenser with DN40 or 1 1/2″ BSPP thread (such as T500 Reflux Condenser) to convert to a triclover mount attachment. The adaptor has a screen to hold the condenser packing in place.
Lead free brass adaptor, is attached to the boiler lid with the original locking nut of a different manufacturer to convert condenser with DN40 or 1 1/2″ BSPP thread to a triclover mount attachment. The adaptor requires a 1 1/2″ Seal (Still Spirits T500 Column O-Ring) to make a sound join.
Stainless steel door mounted drip tray.
- Stainless Steel door mount drip tray with bold brushed finish.
- Robust 18 gauge Stainless Steel construction.
- Three keyholes on backsplash plate for easy mounting.
- Removable grill for easy cleaning.
- Finished smooth for safety and appearance with welded corners.
Dimensions: approx. 15cm x 15cm
From: Krome Dispense
Stainless steel door mounted drip tray.
- Stainless Steel door mount drip tray with bold brushed finish.
- Robust 18 gauge Stainless Steel construction.
- Three keyholes on backsplash plate for easy mounting.
- Removable grill for easy cleaning.
- Finished smooth for safety and appearance with welded corners.
Dimensions: approx. 20cm x 15cm
From: Krome Dispense
Stainless steel door mounted drip tray.
- Stainless Steel door mount drip tray with bold brushed finish.
- Robust 18 gauge Stainless Steel construction.
- Three keyholes on backsplash plate for easy mounting.
- Removable grill for easy cleaning.
- Finished smooth for safety and appearance with welded corners.
Dimensions: approx. 30cm x 15cm
From: Krome Dispense
Stainless steel door mounted drip tray.
- Stainless Steel door mount drip tray with bold brushed finish.
- Robust 18 gauge Stainless Steel construction.
- Three keyholes on backsplash plate for easy mounting.
- Removable grill for easy cleaning.
- Finished smooth for safety and appearance with welded corners.
Dimensions: approx. 35cm x 15cm
From: Krome Dispense
Dr Rudi 2025 Harvest
Batch: 25-269
Alpha: 13.10%
Beta: 7.10%
Duotight - 6.5mm (1/4") x 8mm (5/16") Reducer.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.
From: Kegland
Duotight - 8mm (5/16') Female x 1/4' Male Thread Bulkhead (suits 60cm Thermowell).
Currently the Gen3 model.
Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.
Why use Double O-rings?
The secret to the Duotight sealing performance is not just the fact that it uses high quality EPDM o-rings but also use two of them. The double o-ring means it literally has twice the sealing surface surface when compared with other push in fittings. This makes these fittings even more reliable and reduces the chance of a leak significantly.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi
Includes Locking Nut (suitable for the TempTwister).
This fitting is ideally used with the TempTwister for a FermZilla or KegMenter for use in the FermZilla Range, Kegmenter range or even drilled into an HDPE fermenter.
What is EPDM?
EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, a wide variety of alkaline and acid compounds, water, alcohol, ketone, and beverages.
EPDM is also resistant to aging, and weather and will not perish easily like other rubber compounds. When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long-lasting food grade applications.
From: Kegland
Duotight - 8mm Female - 5-Way Multi-Tee
This particular Duotight tee saves on space and purchasing multiple generic equal tee's when setting up a 4-tap kegerator, or if you simply want to plumb up to four liquid or gas lines from one source.
Simply plumb your gas line in to any of the connections, then split it off to up to four different lines. If you want to cap off certain lines, we would recommend using an 8mm plug.
Flush mountable!
Looking for high quality push-in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.
Why do we use double o-rings?
The secret to the superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface when compared with other push in fittings. This makes Duotight fittings even more reliable and reduces the chance of a leak significantly.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes Duotight fittings the most reliable push fit fittings on the market.
Compatible with:
EVABarrier 4mm ID x 8mm OD line
EVABarrier 5mm ID x 8mm OD line
Red EVABarrier 5mm ID x 8mm OD line
Black Lightshield EVABarrier 4mm ID x 8mm OD line
Not compatible with 6.3mm ID x 9.5mm OD line
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.
These push-in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push-in fittings on the market, Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push-ins on the market have EPDM o-rings, let alone two! per push-in connection.
What is EPDM?
EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone, and beverages.
EPDM is also resistant to aging, and weather and will not perish easily like other rubber compounds. When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA-free and is the number one choice for many long-lasting food-grade applications.
From: Kegland
Duotight 8mm OD retaining circlip, suits any Duotight 8mm fitting. When clipped into place, this circlip prevents the collar of the Duotight fitting from being pushed inwards, making it impossible for the fitting to release its grip on any hose!
Note: Duotight fittings, ball lock disconnects and hose sold seperately.
From: Kegland
Duotight - 8mm (5/16') Plug
This fitting is used for gas or liquid leak testing purposes with Duotight manifolds or fittings.
Use it instead of attaching hosing to a disconnect which has other leak spot potential.
Suitable for 8mm Duotight fittings.
It is particularly useful for testing MK5 regulators and ball lock disconnects without the need for hosing and more valves.
From: Kegland
Duotight - 8mm x 9.5mm Reducer.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port.
From: Kegland
Duotight - 9.5mm (3/8") Female x 1/2" Female Thread.
It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
Note: colour may vary.
From: Kegland
Duotight - 9.5mm (3/8”) Female x ½" Male Thread Ball Valve.
It is suitable for the EVABarrier Beer & Gas line in 9.5mm (3/8") OD line to 6.3mm (1/4") ID.
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
Note: colour may vary.
From: Kegland
A dual purpose / bittering hop with classic resinous pine and lifted citrus characters
Breeding:
Dr Rudi is a triploid variety that was bred from the New Zealand Smoothcone variety cross open pollinated at the New Zealand Horticultural Research Centre and released in 1976 as Super Alpha. Officially changed to Dr Rudi in 2012.
Selection:
Widely selected for its dual-purpose ability, Dr Rudi was once a high alpha type. Selectors note a fresh citrus peel beneath a mix of aromas such as pine needles and lemongrass when used as a late addition become evident in the aroma top notes.
Brewing:
A very versatile hop in the brew house where it can be used to deliver a quality crisp bitterness as well as excellent aroma qualities. Typical of New Zealand varieties, the oil profile sets it apart as a hop with many applications and can now be found in breweries throughout international markets where it is sought for its ability to integrate and finely balance both Ales and Lagers.
'A really super hop!'
Applications:
Works well where resinous, citrus and pine characters are required to build and develop an excellent finishing bitterness. Especially good as a dual purpose variety in single hopped beers as well as with multiple aroma varieties to create first rate new-world beer styles.