Sort by:
A 304 stainless steel 1.5 inch -2 inch Tri-clover adaptor/reducer.
Lead free brass adaptor that screws into the lid of the Pure Distilling Boiler and attaches to a triclover fitting.
A 316 stainless steel 2 inch Tri Clover 90° bend.
- Short Radius (1.5x Diameter)
- 320 Grit Finish
- Pre-Welded with Tri Clover Ferrules
- 316 Stainless Steel
Standard 2" tri-clamp compatible with Grainfather GF30 Conical Fermenter Dual Valve as well as G40/G70 distilling attachments.
- 1.5" tri-clamp to 1/4" Male Threaded Flare Fitting
- 304 Stainless Construction
- Keg Directly from a Brite Tank
- Serve Directly from a Brite Tank
From: Ss Brewing Technologies, USA
A 1.5 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 1.5 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 1.5 Inch Bubble Plate to the 1.5 Inch Sight Glass.
Note: This is not the same seal as a standard 1.5″ Tri-Clamp seal.
A 1.5" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 1.5 inch silicone tri-clover/tri-clamp seal.
A 2 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 2 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 2 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 2 Inch Bubble Plate to the 2 Inch Sight Glass.
Note: This is not the same seal as a standard 2″ Tri-Clamp seal.
A 2" Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 2 inch silicone tri-clover/tri-clamp seal.
A 304 stainless steel 2 inch -4 inch Tri-clover adaptor/reducer.
A 4 inch Tri-Clover/Tri-Clamp clamp made from 304 stainless steel.
A 4 inch silicone tri-clover/tri-clamp seal with a 40 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 4 inch silicone tri-clover/tri-clamp seal with a 60 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A 4 inch silicone tri-clover/tri-clamp seal with a 80 Mesh screen (made from 304 stainless steel) attached to a PTFE edge.
A specially designed seal to seal the Pure Distilling 4 Inch Bubble Plate to the 4 Inch Sight Glass.
Note: This is not the same seal as a standard 4″ Tri-Clamp seal.
A 4 inch silicone tri-clover/tri-clamp seal.
A 200ml trial jar for hydrometer or alcometer readings that is 10 inches / 24.5cm high and made from alcohol resistant plastic. The plastic is very clear making it easy to see through.
Useable depth (approx): 255mm
A 1.5 inch triclover sightglass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
- Dimensions: 15cm × 18cm × 11cm
A 304 stainless steel tri clover fitting that will allow you to connect 1.5″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.
Bulkhead fits hole approximately 42mm in diameter.
A 2 inch tri clover sight glass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
- Dimensions: 15cm × 18cm × 11cm
A 304 stainless steel tri clover fitting that will allow you to connect 2″ tri clover fittings to different vessels and systems. Includes a locknut & o-ring to secure the fitting.
Bulkhead fits hole approximately 53mm in diameter.
A 4 inch tri clover sight glass made from 304 stainless steel.
Specifications
- Made from 304 stainless steel
- Viewing lens is High Borosilicate glass
- Operating Temp: -20-+135℃
- Max pressure: 40PSI
- Weight: 1.5kg
Multipurpose tubing for transferring liquids. Not designed for hot liquids.
Quantity is per metre.
Multipurpose tubing for transferring liquids. Not designed for hot liquids.
Quantity is per metre.
Type 30 Adaptor for Mini duotight Regulator - Suits 2-6kg Cylinders.
Want to take a huge amount of CO2 but pack as light as possible? Grab a Mini Duotight Regulator and this handy little adapter to be able to attach it to any Type 30 Cylinder (CO2). Meaning you can pour between 400 and 1000L of beer whilst on the move!
Taking your kegs on the go has never been this easy!
This adapter includes the nylon wash, ensuring a sound seal to the cylinder.
Simply thread the adapter onto your Mini duotight Regulator, or the 360 Core Actuator Regulator, then onto your 2-6kg CO2 cylinder and you're good to go!
From: Kegland
For the perfect pour, every pour, you need Ultratap.
From the inventor for the original Ventmatic (Intertap) range of tap products comes the next generation design technology that will provide you with the ultimate laminar flow experience to date.
Ultratap is the best way for your friends and customers to see your beverages being served with the most "wow factor". This tap dispenses a truly stunning pour with ease.
Ultratap’s patented all stainless steel construction utilizes 21st century, laser-precision manufacturing techniques ensure your beer meets the glass in perfect condition, every time.
Ultratap’s strength is in its simplicity. It has fewer parts and a solid, all stainless steel construction, compared to other forward sealing taps.
The secret lies within Ultratap’s unique internal surface which minimises micro eddies in the flow of the liquids with dissolved gasses before it reaches the atmosphere, gliding perfectly into your glass.
Ultratap’s forward sealing function keeps your beer fresher and will not leave a residue that will affect the tap’s performance.
For the true laminar experience look for Ultratap wherever great beer flows.
Includes a free black slender tap handle.
Note: This item is the tap & handle only.
