Sort by:
Grainfather G40/G70 Distilling Lid & T500 Reflux Attachment Kit Bundle
Grainfather G40/G70 Distilling Lid & T500 Reflux Attachment Kit Bundle
The G40 & G70 Distilling Lid plus the complete set of fittings to connect the T500 Reflux Condenser (stainless steel or copper) to either the G40 or the G70 for reflux distilling.
The ultimate bundle to pair with the T500 Reflux Condenser stainless steel or copper), allowing you to turn your G40 or G70 Brewing System into an all-in-one automated brewing system that can also be used for reflux distillation. Bundle includes the G40 & G70 Distilling Lid plus the T500 Reflux Condenser Attachment Kit so you can brew high quality beer and distill neutral spirits.
INCLUDES
- G40 & G70 Distilling Lid
- Standard 4" tri-clamp opening (industry standard)
- Pressure relief valve
- Barrel clamp locking mechanism
- 2” to ½” (48mm) DN40 Thread Adapter
- 2” Tri-Clamp Seal with Mesh
- 2” Tri-Clamp
- 4” to 2” Tri-Clamp reducer
- 4” Tri-Clamp Seal
- 4” Tri-Clamp
- 304 Grade Stainless Steel Construction
Note: T500 Reflux Condenser sold separately
A complete set of fittings to connect the G40 & G70 Distilling Lid to the Still Spirits T500 Reflux Condenser (stainless steel or copper) for reflux distilling.
The G40 or the G70 paired with the Distilling Lid and T500 Reflux Condenser Attachment Kit offers an all-in-one automated brewing system that can also be used for reflux distillation, making it the ultimate combo to brew high-quality beer and distill neutral spirits.
INCLUDES
• 2” to ½” (48mm) DN40 Thread Adapter
• 2” Tri-Clamp Seal with Mesh
• 2” Tri-Clamp
• 4” to 2” Tri-Clamp reducer
• 4” Tri-Clamp Seal
• 4” Tri-Clamp
• 304 Grade Stainless Steel Construction
Note: Distilling Lid and T500 Reflux Condenser sold separately
Brewzilla 65L (G3) - Extended Malt Pipe for Boiler Extension (Stainless steel).
This is the upgraded malt pipe for the BrewZilla 65L model when you add the 24L Boiler Extension. It does not come with an extra Halo Support Ring, you will need to either purchase one if you are using a DigiBoil 65L + Extension, or remove the one out of your BrewZilla and place higher.
A new feature of these Extended Malt Pipes is the added feet half way up the malt pipe. These have been added to help those who find it difficult to lift in one motion.
It can also be used on the Digiboil 65L model so you can use a malt pipe with the Digiboil 65L boiler.
Recommended Purchases for Gen 3+ BrewZillas:
Boiler Extension for 65L BrewZilla / DigiBoil
If you are upgrading a DigiBoil you will still need a malt pipe bottom screen and handle.
Dimensions:
- 350mm Diameter
- 600mm High
- Feet are approximately at the 310mm mark
(Dimensions of Standard Malt Pipe for G3: 350mm Diameter x 405mm High)
From: Kegland
Brewzilla 35L - Recirculation Arm Extender for Boiler Extension | Suits 35L and 65L BrewZilla.
Recirculate with ease with the Male to Female Camlock Extender!
From: Kegland
PCO1881 Male x 2 Inch Tri-Clamp (POK)
For all you hop bongers out there. We have an end cap for all end caps! The Polyketone 2 Inch Tri-Clover x PCO1881 Male Thread (PET drink bottle thread like a Schweppes / Coca Cola bottle).
Perfect to use along side the 2" Tri-Clover Hop Bong
- PCO1881 PRV Cap with a Red 35psi Pressure Release Valve
- PCO1881 6.35mm duotight x Carbonation Cap RED for Gas
- PCO1881 6.35mm duotight x Carbonation Cap YELLOW for Liquid
This product is made from high quality engineering plastic and will last a very long time. It's chemically resistant and also designed to resist impact and physical damage.
The thread specification on this product is the PCO 1881 (AKA Coke bottle thread).
From: Kegland
Replacement water discharge tubing for the T500 Still. Connect to outlet block and run to drain.
ID: 8mm
Length: 1.5m
Distilling at home should be fun and easy. That's why we've packed all the beginner distilling essentials into one easy-to-use kit.
The Air Still Essentials Distillation Kit enables you to prepare and ferment your wash, collect distillate, dilute, filter, and flavour your neutral spirit with various Top Shelf Flavourings.
Kit Contains
Equipment
- 12 L Fermenter with Stick-On Thermometer
- Carbon Filter & Collection System
- Mixing Spoon
- Ceramic Boil Enhancers
- Hydrometer
- Alcometer and Test Tube
Wash Ingredients & Consumables
- 1 x sachet Pure Turbo Yeast Nutrient (78g)
- 1 x sachet Turbo Clear (65g)
- 1 x sachet Turbo Carbon (54g)
- 1 x sachet Pure Turbo Yeast (10g)
- 2 x 1.2 kg Dextrose
- 50 ml Distilling Conditioner
- 3 x 50 ml Top Shelf Flavourings
Note: The Air Still Essentials Distillation Kit does not include the Air Still or the Air Still Pro.
The Air Still Pro Complete Distillery Kit includes the equipment and ingredients to craft high-quality light and dark spirits, plus the Still Spirits Air Still Pro Table-Top Distillation System.
Still Spirits Air Still Pro
The Air Still Pro is a small-batch, 2-in-1 distillation system that allows you to craft high-quality light and dark spirits. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode, and flavoursome and botanical-infused spirits at up to 80% ABV in the pot still mode.
Features
- Capacity: 4L
- Yield: 2.25 L of 40% ABV alcohol per 8L wash
- Pot Still mode: Distills at 80% ABV before diluting to 40% ABV
- Reflux Still mode: Distills at 90% ABV before diluting to 40% ABV
- Dimensions: 42cm (h) x 23cm (w) x 36cm (d)
- Weight: 5.6 kgs
- Power: 220v
- Warranty: 3 years
Also included:
- Air Still Pro Head Unit with a pre-packed reflux column
- Air Still Pro Boiler and power cable
- Botanical basket
- 2x glass foreshots collection vials
- Easy-swap distillation tips for reflux and pot still modes
- Distillation tip spanner
- Starter guide
Air Still Table-Top Distillation System
Everything to prepare and ferment your wash, collect distillate, dilute, filter, and flavour your neutral spirit with a selection of Top Shelf Flavourings.
Equipment
- 12 L (3.2 US Gal) Fermenter with Stick-On Thermometer
- Carbon Filter & Collection System
- Mixing Spoon
- Ceramic Boil Enhancers
- Hydrometer
- Alcometer and Test Tube
Wash Ingredients & Consumables
- 1 x sachet Pure Turbo Yeast Nutrient (78g)
- 1 x sachet Turbo Clear (65g)
- 1 x sachet Turbo Carbon (54g)
- 1 x sachet Pure Turbo Yeast (10g)
- 2 x 1.2 kg Dextrose
- 50 ml Distilling Conditioner
- 3 x 50 ml Top Shelf Flavourings
Upgrade your Still Spirits Air Still with the Air Still Pro Head Unit. Get all the benefits of the Air Still Pro and eliminate the need to purchase a new table-top system.
Craft high quality light and dark spirits using the Air Still Pro Head Unit and your Still Spirits Air Still boiler. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro Head Unit enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode and flavoursome and botanical-infused spirits at up to 80% ABV in the pot still mode.
An automated foreshots collection vial captures the first 30 ml of distillate, allowing you to discard foreshots easily. This advanced feature improves safety and saves extra steps in the distilling process. In addition, other reflux stills may require an input cooling source, such as water, but the Air Still Pro column cools itself.
The Air Still Pro Head Unit is easy to use and compatible with the Still Spirits Air Still Boiler.
Please note: The Air Still Pro Head Unit warranty is void if used with any boiler that is not provided with the Still Spirits Air Still or Air Still Pro.
Features:
- Yield: 2.25 L of 40% ABV alcohol per 8L wash
- Pot Still mode: Distills at 80% ABV before diluting to 40% ABV
- Reflux Still mode: Distills at 90% ABV before diluting to 40% ABV
- Dimensions: 42cm (h) x 21cm (w) x 37cm (d)
- Weight: 3.6kgs
- Power: 220v
- Warranty: 3 years
Included in the box:
- Air Still Pro Head Unit with a pre-packed reflux column
- Botanical basket
- 2x glass foreshots collection vials
- Easy-swap distillation tips for reflux and pot still modes
- Distillation tip spanner
- Starter guide
The Air Still Pro is a small-batch, 2-in-1 distillation system that allows you to craft high quality light and dark spirits. With a multi-purpose condenser and interchangeable distillation tips, the Air Still Pro enables you to produce clean, neutral spirits at up to 90% ABV in reflux mode and make flavoursome and botanical-infused spirits at up to 80% ABV in the pot still mode.
An automatic foreshots collection vial captures the first 30 ml of distillate, allowing you to discard foreshots easily. This advanced feature improves safety and saves you extra steps in the process. In addition, other reflux stills may require an input cooling source, such as water, but the Air Still Pro column cools itself.
The Air Still Pro is easy to use and suitable for keen beginners or more advanced distillers looking for a multi-purpose air still. Also available as the Air Still Pro Head Unit to upgrade your Still Spirits Air Still.
You can also purchase the Air Still Pro Complete Distillery Kit, which includes the equipment and ingredients to craft high-quality light and dark spirits along with the Still Spirits Air Still Pro..
Features:
- Capacity: 4L
- Yield: 2.25 L of 40% ABV alcohol per 8L wash
- Pot Still mode: Distills at 80% ABV before diluting to 40% ABV
- Reflux Still mode: Distills at 90% ABV before diluting to 40% ABV
- Dimensions: 42cm (h) x 23cm (w) x 36cm (d)
- Weight: 5.6 kgs
- Power: 220v
- Warranty: 3 years
Included in the box:
- Air Still Pro Head Unit with a pre-packed reflux column
- Air Still Pro Boiler and power cable
- Botanical basket
- 2x glass foreshots collection vials
- Easy-swap distillation tips for reflux and pot still modes
- Distillation tip spanner
- Starter guide
A submersible pump, 2000L/H, 3.2m head, which is the same as what is supplied with the Bucket Blaster, if you need a replacement.
From: Kegland
The FermZilla All Rounder 60L is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing. It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical Unitank. So like the name says it's the "All Rounder".
If you want to use this product under pressure we would recommend that you use the pressure kit.
This kit includes:
1 x All rounder tank
1 x Stainless Steel Handle Assembly.
1 x 304 stainless stand
1 x Airlock
1 x Pressure rated lid
1 x Digital temperature sticker
1 x Red 2.5bar pressure relief valve
1 x Graduation Sticker
Easy to Clean
This fermenter is made from super smooth PET so it's easy to clean. Just use a small scoop of PBW or similar and wipe it clean after a 5 minute soak. No scrubbing necessary.
Large 120mm Opening
The opening at the top is significantly larger then the older Snub Nose or other pressure fermenters. This bad boy has 120mm opening so even brewers with large arms can easily get into the top making cleaning even easier.
Pressure Rated
This fermenter is rated up to 2.5bar so you can force carbonate just like a keg. You can use this fermenter for closed transfers and significantly reduce oxygen exposure.
Crystal Clear
The wall of the All Rounder is crystal clear so you can see what's going on inside. This makes it really easy to determine visually how the fermentation, how the yeast is floculating etc.
Impermeable
The PET plastic is not permeable like some other fermenters made from PP or HDPE. The fermenter wall is a much better gas barrier keeping your product fresher for longer.
No Flavour and Aroma Carry Over
Other HDPE fermenters tend to be so porous they carry flavour and aroma from one batch to another.
Robust and Difficult to Damage
Impossible to smash like glass. The tank is impact resistant but light weight and easy to use.
Please read the instructions thoroughly before use. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
IMPORTANT NOTE: This tank should not be used for hot liquid. Do not put liquids inside this tank over 50C. It will melt the tank. Also this tank comes pressure tested however we recommend that every 2 years you re-hydro test this tank yourself.
Note: Some of the photos are of the FermZilla - All Rounder 60L with a red plastic pressure kit. The pressure kit is not included in the standard kit.
From: Kegland
Pro Sight Glass Distillation / Steam Condenser Lid
Suits Gen 4 and Gen 3 BrewZillas, Digiboils and older model Robobrews, for both 35L and 65L models.
Designed to be extremely sturdy when using heavier stills or off-centre steam condenser units. Now you can watch your wash boil and see if it's foaming or about to puke. If you are brewing beer indoors you may want to use a steam condenser lid set, without having to take off the entire lid to do hop/salt additions, simply remove the 3" Sight Glass and throw in (take care when hot).
PPSU is an excellent choice for components that are exposed to high temperatures (up to 200°C) and corrosive media due to its exceptional chemical resistance. As well as being extremely impact resistant.
We have decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. This will allow us to injection mold intricate parts that would have been near impossible to do in stainless steel or lab-grade glass. Because this is a very unique type of plastic, it comes at a much higher cost per kg than other industrial plastics. So much so that it costs more than stainless steel.
Do you want to brew indoors but don't want the roof to get all sticky?
Specifications 35L
- Thicker Silicone O-Ring for a tighter seal
- 2 Inch Tri-clover Top Ferrule Port
- 3 Inch Sight Glass Ferrule
Includes 3 Inch PPSU Sight Glass Disc, 3 Inch Tri-Clover Clamp and 3 Inch Tri-Clover Silicone Seal.
Specifications 65L
- Thicker Silicone O-Ring for a tighter seal
- 4 Inch Tri-clover Top Ferrule Port
- 3 Inch Sight Glass Ferrule
Includes 3 Inch PPSU Sight Glass Disc, 3 Inch Tri-Clover Clamp and 3 Inch Tri-Clover Silicone Seal.
This unit has been designed to be used with the DigiBoil and BrewZilla. We do not have data on other branded boilers if their clamps are suitable to make a complete seal.
From: Kegland
Auto Syphon Racking Cane Easy Jiggler - 304 Stainless Steel - for syphoning out of a carboy, demijohn, bucket or FermZilla. This siphon includes 150cm x 10mm ID silicone tube.
This whole assembly is plasticiser and BPA free. It will not break like the plastic auto syphons or polycarbonate designs.
It's made robust out of 304 grade stainless steel and is really easy to take apart for cleaning. It's more versatile than a conventional racking cane and easier to start but at the same time similarly simple to use and clean.
Forget about fermenter taps and use a syphon. Threaded fermenter taps are hard to clean and sanitise so having a fermenter without a tap is often the best choice, and to get the beverage out of the fermenter without a tap this siphon is the natural choice.
INSTRUCTIONS
1: Sanitise and rinse your syphon
2: Make sure you have the full vessel significantly above the empty vessel you are filling
3: Attach the curved syphon to the hose
4: Submerge the end of syphon into your full container.
5: With long swift strokes, shake the syphon tube up and down to start the syphon action
Length: 57cm
Stainless tube: 14mm OD x 12mm ID
Silicone Tube: 1.5m x 10mm ID
From: Kegland
Heavy Duty False Bottom for DigiBoil and BrewZilla - 35L and 65L
Designed exclusively for the 3 Vessel homebrewing market that wants to take full use of a DigiBoil to be used as a Mash Tun/Lauter Vessel. It can also be used on the BrewZilla Gen4 and 3.1.1 units if you wish.
Welded together for maximum strength, unlike two-piece heavy-duty false bottoms on the market. Welded handles for ease and strength. This false bottom is so strong it withstood the weight of 1 x 100kg KegLand Staff member with 1 x 80kg Secondary KegLand Staff member.
35L Dimensions:
295mm Diameter
45mm Height
65L Dimensions:
390mm Diameter
48mm Height
Approximate dead space: 3L
From: Kegland
2" Tri-Clamp Sight Glass - Hop Bong with PCO1881 Male Port and black bottle cap.
Named purely on its looks and not its function. The Hop Bong is a versatile pressurisable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory.
This particular sized tri-clamp hop bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new tri-clamp adapted pressure lid. It can also be adapted to any 2" tri-clamp port in your system to use either inline or as a dry hopping device.
Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.
Depending on how you set up your Hop Bong, the most common two fittings for the PCO Port are the Duotight 6.35mm Red Gas Carbonation Cap or Duotight 6.35mm Yellow Gas Carbonation Cap , and the Red PRV Cap.
Please note that the Hop Bong is not made from glass. It is made from special engineering plastic.
Capacity in Hop Pellets
150g to 180g
From: Kegland
2" Hop Bong Upgrade Kit For FermZillas - The Kriger (Warrior).
Named purely on its looks and not its function. The Hop Bong is a versatile pressurisable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters but also as an inline carbonation/oxygenation accessory.
This is an upgrade kit for existing FermZilla Tri-Conical and All Rounder fermenters users who want to use the new 2" Tri-Clamp Adapted Pressure Lid.
Constructed from Nylon 12: an autoclavable, extremely robust, and chemical resistant engineering plastic.
Includes:
1 x FermZilla Tri-Clamp Pressure Lid (including PRV, Bottle caps, 2Inch clamp, seal, PCO1881/Tri clover adaptor)
1 x FermZilla Tri-Conical - 2" x 2" Tri-Clamp Butterfly Valve
1 x Carbonation Cap PCO1881 (Red / Gas)
1 x 2 Inch Tri-Clamp - Hop Bong - Sight Glass
1 x PCO1881 PRV Cap
1 x Red PRV (35psi/2.5bar)
2 x 2 Inch Tri-Clamp Clamp
2 x 2 Inch Tri-Clamp Silicone Beaded Seal
Does not include:
1 x Carbonation Cap PCO1881 (Yellow / Liquid)
1 x Carbonation Cap PCO1881 (Red / Gas)
1 x SS Float + 80cm Silicone Dip Tube + Dip Tube Hop Filter
Please note that the Hop Bong is not made from glass. It is made from special engineering plastic.
Capacity in Hop Pellets
150g to 180g
From: Kegland
FermZilla Tri-Conical - 2 Inch x 2 Inch Tri-Clamp Butterfly Valve.
Compatible with any 2 Inch tri-clamp fitting. Primarily designed for the:
- FermZilla 2" Tri-Clamp Lid
- in conjunction with the 2" Tri-Clamp Hop Bong
If you are looking to put your FermZilla Tri-Conical / All Rounder in a Fermentation Chamber / Fridge, you will want to allow 420mm measured from the base of the ring collar to a comfortable level to pull the pressure relief valve to purge oxygen from the hop bong.
From: Kegland
Braided Reinforced Heavy Duty Silicone Hose - 10m Roll (12mm ID x 20mm OD).
Properties:
Odorless, tasteless and inert
Good Electrical and weatherability properties
Resists UV, Ozone, gases and moisture
Features:
Working Temperatures -60°C ~ 260°C
Working Pressure: 58-580 psi
Applications:
Commercial brewery hot and cold side transfers
Length: 10m
From: Kegland
Transform the G40 or G70 Brewing System into a home distillery with the G40 & G70 Distilling Lid. This lid features an industry standard 4” tri-clamp opening to allow for the connection of the Still Spirits T500 Reflux and Alembic Condensers, as well as third-party distilling equipment. Note: We will be launching Accessory Attachment Kits for the T500 Reflux and Alembic Condensers in the first quarter of 2023.
Features:
-
304 Grade Stainless Steel Construction
-
Standard 4” tri-clamp opening (industry standard)
-
Pressure relief valve
-
Barrel clamp locking mechanism
The Black Phantom Font Kit is the perfect match for your Black Punisher or Stealth Bomber Nukataps. Made of high quality 304 stainless with a classy matte black finish, it is sure to add a touch of panache to your kegerator!
This duotight font kit includes:
- Triple Tap Black Punisher Stainless Font Only (includes gasket)
- 3 x duotight compatible Short Shank
- 3 x Black Plastic Tap Handle
- Pre-Cut - 4mm ID x 8mm OD Evabarrier Beer Line and 5mm ID x 8mm OD Evabarrier Gas Line.
- 3 x duotight 6.5mm x 8mm push in fittings to easily join the beer line to the tap shank
- 4 x Metric M5 stainless screws to secure the font to the fridge
- 2 x duotight tee pieces for the gas line
- A 7 in 1 tool for assembly
Please note: Nukataps are not included
These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer.
Specs:
- 320mm Tall (without taps)
- 78mm Diameter
- Base Collar Diameter 111mm
- Internal Foam Insulation
Please note: handle with care. Scratches will be more visible than the Brushed Stainless Steel model.
This font kit has been designed to suit the Series 4, Series X and Grand Deluxe Ranges of Kegerators.
The holes in the flange are pre-drilled so they can be attached easily using the metric M5 screws.
From: Kegland
The Black Phantom Font Kit is the perfect match for your Black Punisher or Stealth Bomber Nukataps. Made of high quality 304 stainless with a classy matte black finish, it is sure to add a touch of panache to your kegerator!
This duotight font kit includes:
- Double Tap Black Punisher Stainless Font Only (includes gasket)
- 2 x duotight compatible Short Shank
- 2 x Black Plastic Tap Handle
- Pre-Cut - 4mm ID x 8mm OD Evabarrier Beer Line and 5mm ID x 8mm OD Evabarrier Gas Line.
- 2 x duotight 6.5mm x 8mm push in fittings to easily join the beer line to the tap shank
- 4 x Metric M5 stainless screws to secure the font to the fridge
- 1 x duotight tee pieces for the gas line
- A 7 in 1 tool for assembly
Please note: Nukataps are not included
These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer.
Specs:
- 320mm Tall (without taps)
- 78mm Diameter
- Base Collar Diameter 111mm
- Internal Foam Insulation
Please note: handle with care. Scratches will be more visible than the Brushed Stainless Steel model.
This font kit has been designed to suit the Series 4, Series X and Grand Deluxe Ranges of Kegerators.
The holes in the flange are pre-drilled so they can be attached easily using the metric M5 screws.
From: Kegland
Tail Piece for your dispensing system that provides a 1/4" MFL connector instead of a barb. Fits nicely with our hex nut. You may also need a neoprene washer.
From: Krome Dispense
Material: 304 grade stainless steel
New commercial 20 litre stainless kegs with D-Type spear included and rubber base and handle.
Premium brand new kegs rated to 130psi working pressure and made using a robotic orbital welding machine with super smooth welding marks making them easier to clean.
These kegs are also passivated, giving them a matte finish, to ensure superior rust protection.
The black rubber handles and base allows easier transportation and less scuffs on the floor of your cool room / kegerator.
Features:
- new, with D-Type spear
- maximum working pressure: 130psi
Dimensions: approx. 240mm Diameter x 570mm High
Stated Capacity: 20 litres
Serial Numbers: No
Seal Kit - duotight 8mm x Flow Control Ball Lock Disconnect
Please refer to the product photos for an exploded diagram of where the replacement seals and poppet placement.
This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost.
RAPT Temperature Controlled Fermentation Chamber
This fermentation chamber has been designed to heat and cool your entire fermenter. This is the ideal scenario as the whole fermentation vessel is placed in a temperature controlled environment which gives you the most even temperature and most precise control of your fermenter.
Many home made products can greatly be improved with perfect temperature control. The RAPT Temperature Controlled Fermentation Chamber gives you an electrically efficient means of setting, monitoring and controlling temperature which is perfect for Beer Making, Wine Making, Salami Making, leavening bread, fermenting yogurt, kombucha, germinating seeds, growing sprouts, kimchi, sauerkraut, olives, cheese, making spirit washes. Accurate temperature control is the key to getting reliable and repeatable results.
From -2°C up to 50°C all at the touch of your fingertips!
The control panel comes complete with an integrated colour TFT screen, the integrated secondary regulator that can be used to regulate gas into the chamber with our Inline Regulator with an integrated gauge or alternatively this can be switched over to the Gauge integrated BlowTie unit to regulate residual pressure in your fermenter. The 4 button colour display conveniently shows a log of historic temperature graphs, allows you to start, set/stop temperature profiles and gives you access to other critical information for that particular fermentation.
For more accurate readings of the core temperature of your fermenter. We highly recommend using a thermowell like our 60cm duotight thermowell with the 2m probe extension for the RAPT Fermentation Chamber.
Perfect as a Kegerator too!
This multi purpose chamber can also be used as a kegerator. In particularly cold climates where the ambient temp is below zero, this chamber can warm your kegs and prevent them from freezing. This chamber also has a higher keg storage capacity than a conventional kegerator that takes up the same footprint. This unit can hold 4 x 19L kegs on the floor and has enough headroom that you can also fit another layer of 9.5L half size kegs above this. To fit beer taps, you can drill your own holes through the door.
Convert to Display Chamber
This Chamber comes with brushed stainless steel PU foam-filled door. If you want to upgrade to a glass door the double glazed glass door can be purchased separately and switched over - coming soon.
What is RAPT?
RAPT is a dedicated Internet of Things (IOT) Hub for fermentation logging and control. It's a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involved different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notifications in the off instance that something doesn't go to plan.
Specifications:
Integrated Heating: 50watt Heating Power
Cooling Capacity: 300watt Cooling Power
Max Power Consumption: 225 Watts
Refrigerant: r600a
Connectivity: Wifi (802.11) and Bluetooth
Temperature accuracy: +/- 0.1C
Temp Resolution: 0.1C
Integrated Screen: 2.8inch (diagonal) 320 x 240 Colour LCD TFT Active Matrix
External Dimensions:
Width: 540mm
Depth: 610mm
Height: 1760mm
Internal Dimensions:
Width: 440mm
Depth: 500mm
Height: 1300mm
To see the dimensioned drawings on this part click here.
Why buy an insulated fermentation chamber over a glycol chiller?
Typically in the past, some customers have needed to resort to glycol chillers to chill fermenters but this represents several issues:
- Glycol chillers often require a very cold liquid to enter into a fermenter causing an excessively cold part in the fermenter core.
- Glycol chillers consume significant amounts of power and in most instances more than double what this chamber would consume.
- Glycol chillers often result in spilling sticky glycol especially when hoses are connected and disconnected to the fermenter.
- Glycol chillers generally require penetrations through the walls/lid of the fermenter making the fermenter less sanitary and requiring more cleaning. "who needs that!"
- Often fermenters are not made with sufficient insulation. So when using a glycol chiller much of the chilling is lost which is not only power inefficient but the customer ends up with a large temperature gradient. This temperature gradient can result in convection currents in the fermenter that make it difficult for yeast and other solids to settle out of suspension. So clarification of the beer takes significantly longer.
- Many glycol chillers and fermenter combinations do not have sufficient power or are not well enough insulated to cool to sub-zero temperatures. So crash chilling is not possible. This is a significant compromise to a temperature-controlled solution and also results in less ability to clarify the finished beer.
For these reasons KegLand has developed the worlds first dedicated RAPT enabled fermentation chamber that can cool down to -2C and heat up to 50C even in hot and cold weather.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/
"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device. It also gives you the added functionality of push notifications to your mobile device."
From: Kegland
Makes 5 Litres of European Style Vodka
Ingredients: Water, Natural Flavour, Preservative (202)
Manufactured in Auckland, NZ
Add 10 ml per litre of spirit, flavoured or not, and be amazed at the difference.
Purifies all spirits rapidly.
Ingredients: Fruit Acids, Starch
Manufactured in Auckland NZ
Add 10 ml per litre of spirit, flavoured or not and, be amazed at the difference.
Purifies all spirits rapidly.
Ingredients: Fruit Acids, Starch
Manufactured in Auckland NZ
LalBrew NovaLager™ is a true bottom-fermenting Saccharomyces pastorianus hybrid from the novel Group III lineage that has been selected to produce clean lager beers with distinct flavour characteristics and superior fermentation performance.
LalBrew NovaLager™ is a robust lager strain with ideal characteristics for lager beer production including fast fermentations and high attenuation. The distinct flavour profile is very clean with slight esters over a wide temperature range.
This strain is a low VDK/diacetyl producer and utilises patented technology from the University of California Davis (USA) that inhibits the production of hydrogen sulphide (H2S) off-flavours, therefore reducing the maturation time associated with lager beer production.
Through expression of a β-glucosidase enzyme, LalBrew NovaLager can also promote hop biotransformation and accentuate hop flavour and aroma making it an ideal candidate for hoppy lagers.
Brewing Properties
In Lallemand’s Standard Conditions Wort at 12°C (53.6°F) LalBrew NovaLager™ yeast exhibits: Vigorous fermentation that can be completed in 6 days.
High Attenuation and Medium Flocculation.
Aroma and flavour are clean with low to medium esters, no sulphur. This strain is POF negative.
The optimal temperature range for LalBrew NovaLager™ yeast when producing traditional styles is 10 – 20°C (50 – 68°F).
Lag phase, total fermentation time, attenuation and flavour are dependent on pitch rate, yeast handling, fermentation temperature and nutritional quality of the wort.
Click here to download the technical data sheet.
Click here to download Lallemand's Lager Strain Best Practices
Click here for the Lallemand Pitch Rate Calculator to calculate the amount of yeast you need.
This product is the result of the research and development work of Renaissance Bioscience Corp. (Vancouver BC, Canada) in partnership with Lallemand Brewing. LalBrew NovaLager™ was selected using classical and non-GMO breeding methods to obtain a novel Saccharomyces cerevisiae x Saccharomyces eubayanus hybrid strain that defines a novel Group III (Renaissance) lager lineage that is distinct from any other traditional Saccharomyces pastorianus strains.
The 25L Sparge Water Heater is designed to be used with brewing systems of up to 40L, making it the perfect companion for the G40 or the G30. This temperature-controlled urn allows you to heat up to 25L of water in preparation to sparge, reducing the time and effort of heating additional sparge water during your brew, making your brew days even easier.
Specifications
- 304 grade stainless steel with a brushed finish.
- 25L capacity
- 2250W
- Heats up to 25L (6.6 US Gal) of sparge water in approx. 50 minutes.
- One piece structure for easy cleaning.
- Cool touch lid, with a twisted lock for safety purposes.
- Water gauge indication with an easy to use ball valve tap for dispensing water.
- 45-110°C variable thermostat to heat your water to the desired temperature.
- Heating lights to indicate when the temperature has been reached or still heating.
- Concealed heating element.
In Line Regulator with 8mm push fit connections.
This unit has no gauge. Looking for the Duotight Inline Regulator with Gauge?
This inline regulator is suitable for gas or liquid. The design has two main features:
1. Push In 8mm
It comes with 8mm push fit connectors so you can push your beer, water, gas line directly into the unit. No need for hose clamps, just push your EVABarrier line directly into the connector and it's securely joined.
2. Handy Tee Bar Adjustment
These have been designed with a highly visible yellow tee bar adjustment knob. Significantly easier than the previous designs that required a phillips head screw driver to adjust the pressure.
Constructed with Non-Corrosive Acetyl, Nitrile & Stainless Components. The Regulator body has two wall mounting points.
These regulators work great for reducing your mains pressure from 0-159psi. The maximum inlet pressure is 150psi.
From: Kegland
Duotight 9.5mm x Ball Lock Disconnect (Black + Yellow/Liquid).
Note: this is the 9.5mm disconnect - the larger size for faster flow transfers. If you are looking for the 8mm disconnect, you'll find it here.
This all new ball lock disconnect sets a new bar! The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze!
Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.
The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassemble and clean.
The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured.
This particular ball lock disconnect has been designed to suit 8mm outside diameter beer/gas line. Due to the integrated duotight fitting the line will simply push directly into this fitting.
Some of the features include:
-
Duotight push in
These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
-
Compact
The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
-
Overmolded Poppet
The overmolded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
-
Tool-less Disassembly
Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
-
Extreme Chemical Resistance
No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmolded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
-
Toughness
This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough!
-
High Flow
The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.
From: Kegland
A 12m roll of EVABarrier line.
Looking to purchase by the meter, then you'll find it here.
This new EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.
Outer Barrier
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.
Inner Barrier
The inner barrier is made from a proprietary polymer that provides an excellent gas barrier. The significantly better barrier properties means your beer is better protected from oxygen and also has a better barrier to CO2 loss. So your beer will stay fresher for longer and not loose carbonation like other beer line types. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.
Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.
Dimensions/Options:
4mm internal (8mm external)
5mm internal (8mm external)
Pressure Rating (with 1.5 safety factor):
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)
Length: 12m
From: Kegland
A fresh fruit flavour to turn standard vodka into something very special. Ideal for cocktail mixes, or alcohol free mixed with lemonade or over ice cream.
Add to 1 litre of spirit or vodka to make a delicious Mango Vodka.
Ingredients: Sugar, Water, Flavour, Preservative (202, 211), Colour
(122, 102, 110)
Manufactured in Auckland, New Zealand
