Sort by:
A replacement grain plate for the Grainfather G40 mash basket. Can also be placed on top of the grain in the mash basket (top plate) during mash recirculation and sparging. Also compatible with G70 v2.
The ATF TropiLager has a pleasant tropical pineapple aroma with notes of citrus along with a clean crisp malt aroma. The flavour is clean and crisp with a mild, slightly sweet, tropical fruit character leading to a smooth bitterness and drying finish. A very nice summer beer.
Yeast is not included in the kit. If fermenting cold we recommend using Froth Krisp (Assumed Origin: Weinhenstephan), Fermentis SafLager W-34/70, or Lallemand Diamond Lager Yeast.
If fermenting warm we recommend using Fermentis SafLager W-34/70 or Mangrove Jack's Californian Lager Yeast.
Mangrove Jack's Californian Lager Yeast
Mangrove Jack's Californian Lager yeast is a unique lager strain that has the ability to ferment at ale temperatures and still provide a typical lager flavour profile.
Fermentis SafLager W-34/70
Sensory testing performed by Fermentis on W-34/70 shows that it is a very robust yeast capable of providing a clean neutral flavour profile across a wide range of fermentation temperatures (12℃ - 20℃). Click here to download the Fermentis iPhone app for more information.
The ATF TropiLager has a pleasant tropical pineapple aroma with notes of citrus along with a clean crisp malt aroma. The flavour is clean and crisp with a mild, slightly sweet, tropical fruit character leading to a smooth bitterness and drying finish. A very nice summer beer.
Yeast is not included in the kit. If fermenting cold we recommend using Froth Krisp (Assumed Origin: Weinhenstephan), Fermentis SafLager W-34/70, or Lallemand Diamond Lager Yeast.
If fermenting warm we recommend using Fermentis SafLager W-34/70 or Mangrove Jack's Californian Lager Yeast.
Mangrove Jack's Californian Lager Yeast
Mangrove Jack's Californian Lager yeast is a unique lager strain that has the ability to ferment at ale temperatures and still provide a typical lager flavour profile.
Fermentis SafLager W-34/70
Sensory testing performed by Fermentis on W-34/70 shows that it is a very robust yeast capable of providing a clean neutral flavour profile across a wide range of fermentation temperatures (12℃ - 20℃). Click here to download the Fermentis iPhone app for more information.
FermZilla 55L Tri-Conical Starter Kit - Generation 3.0
Introducing the Gen3 FermZilla Tri-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve. This unit was born from customer feedback we received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clamp FermZilla Range.
The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point in all the different sizes and models.
The FermZilla 55L Tri-Conical can be used in the following ways:
- Basic Gravity Fermenter - New Brewers
- Pressure Brewing Kit - Most Popular
- Hop Bong Pressure Kit - For Intermediate Brewers
- Glycol Twister Pressure Brewing Kit - Glycol Obsessed
What's new the difference between Gen2 and Gen3?
1. Molded 3 inch tri-clamp ferrule in the body of the FermZilla tank
2. 3 inch to 2 inch tri-clamp Butterfly Valve
3. 2 inch tri-clamp compatible Collection Container
Is it easier to clean / take apart than the Gen2?
YES, It is by far the easiest Conical PET fermenter to disassemble and clean into all the nooks and crannies. Simply release all pressure inside the vessel and detatch the tri clover clamps.
What does the starter kit come with?
1 x 55L Conical FermZilla Tri-Conical Base Kit (unassembled)
1 x 55L Gen 3 Tri-Conical Tank with metal neck ring
1 x Standard Top Lid, with Red PRV (35psi) [2 x Male PCO1881 Cap Threads] [Up to 4 drill ports for accessories]
1 x Collar Lid Ring
1 x Grommet PCO1881 Black Cap + 1 x Blank PCO1881 Black Cap for lid
1 x Premium 3 Piece Airlock
1 x 3 inch tri clover to 2 inch tri clover Butterfly Valve
1 x 1000mL Collection Container & Lid* [2 x Male Cap Threads]
2 x Blank PCO1881 Black Cap
1 x Brewbuilt Flex Container lid with 2 inch tri-clover ferrule.
1 x 3 piece ~ 3 inch tri clover clamp [+ 1 x 3" Beaded Silicone Seal]
1 x 2 piece ~ 2 inch tri clover clamp [+ 1 x 2" Beaded Silicone Seal]
1 x Stainless Stand with swing handles
1 x Stainless Steel Handle Assembly
1 x Strip Stick On Thermometer
1 x Level indicator sticker (Litres and Gallons)
1 x Spare Lid O-Ring
1 x Spare Collection Container O-Ring
Instructions:
To download the instruction sheet for this product click on the link below:
FermZilla 55L - Tri-Conical PDF Instruction Manual
Dimensions:
To download the dimensioned drawings for this product click on the link below:
FermZilla 55L Tri-Conical Dimensioned Drawing
Warnings:
Please read the instructions thoroughly before use.
- The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
- Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.
- Do not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.
Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time. To do this. Fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads by tipping it upside down, in all directions where there are risks of leakage.
Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.
From: Kegland
35L BrewZilla Generation 4.1
Wifi / RAPT Integration
The BrewZilla Gen 4.1 is designed to be a compact single vessel all grain home brewing system that can be run off a single 220-240v socket. A complete turnkey system with a delay timing feature and step mash functionality. Built to make batches up to 30L, it is the ideal solution for those who want to take the first step in all-grain brewing while also wanting full control of their batch from start to finish.
The BrewZilla brewery type has been used across the world and won homebrew competitions in every country the brewery has been sold. It's the most sold single vessel brewery worldwide and can be used for Home Brewing, Distillation, Preserve Canning, Sous Vide Cooking or just as a boiler. Our larger versions can also be used as a portable hot tub!
Some features that differentiate this brewery from other Brewery designs are:
Complete Concave Draining Base
The new base design completely drains out meaning you capture every single bit of wort. No longer do you need to tilt the brewery to extract every last bit of wort. This also makes it suitable for CIP cleaning using our new Low Volume CIP Spray Rotor.
False Bottom Pump Protection Screen
One of the key features of all the BrewZilla single vessel units is the false bottom protection screen. This screen avoids the need for doing a whirlpool and it filters wort and prevents more than 95% of hops and hot break getting sucked into the pump and thus greatly reduces the blocked pump issues that are often an issue with other brewery designs.
Ultra Low Watt Density
The BrewZilla has significantly lower watt density than other breweries. The main benefit of lower watt densities are that it enables you to produce lighter colours of beers that would otherwise get some caramelisation. The ultra low watt density also means you have less chance of boil overs, you get less crud sticking to the element making cleaning easier and ultimately reduces wear and tear on the element meaning even with significant abuse your elements will last way longer.
RAPT/Wifi Connected
The new Gen 4 models are the first BrewZilla that connects to the RAPT Portal (https://app.rapt.io/). This portal allows you to track, record and monitor your brews online. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past and control the brewery remotely so you can start pre-heating water remotely or simply keep an eye on the brewing process while you do something else. Get push notifications to your mobile phone of when to add hops or start the boil.
Along with this ease of access and control. The RAPT BrewZilla will also allow you to fully customise your brew day with profiles specifically tuned to your style of brewing or your recipe.
For example you could set up your profile to receive certain alarms or messages when you are required to do something. E.g. Adding grain when the strike temperature is reached. Mash-Out Alarm when you're ready to sparge, Salt / Hop additions when you've reached the boil. As well as hop stand additions or chilling instructions. All of this at the touch of a button that is preprogrammed to what you want to do. No more egg timers, no more phone timers. Everything controlled by the one area.
Bluetooth Gateway Device
KegLand is currently developing various bluetooth devices such as RAPT Bluetooth Thermometer (low energy BLE) other sensors which will be compatible with this brewery. This brewery is able to receive the BLE beacons and relay this information onto the RAPT portal. Also by receiving multiple BLE thermometer sensors the Brewery is able to make smarter and more automated decisions on how to control the brewing or distillation process. For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.
Improved Base Design with Easy Access Pump
The new base design means we have sealed all the electronics on the underside of the brewery into a separate junction box. This has allowed us to omit the bottom cover. This significant design change means that the pump can be accessed much more easily. It also means the plumbing can be changed more easily too. For instance you can re-arrange the plumping to the pump to pump into the tap outlet or change this so the tap outlet bypasses the pump. These changes make it more flexible but also much easier to take apart the pump for cleaning and maintenance if required.
RAPT Controller with Full Colour Screen
The new RAPT controller has an easy to read full colour screen. The controller can also be disconnected easily making wash down easier. The controller is mounted in a higher position with a tilting frame so you can angle the screen toward you depending on how tall you are. The new controller module is packed with features and KegLand is consistently updating firmware to include more features. Firmware updates are quick and painless and with a single click you can upgrade all Gen 4 units to the latest firmware to take advantage of new features and accessories. Forget getting on your knees mid-brew, do it all while standing or sitting next to your BrewZilla. The controller can also activate the pump. Meaning there are no toggle switches anywhere on the BrewZilla Gen 4.1.
IEC Cable for Easy Storage
The new design has a removable IEC cable so you can unplug the cable making it more neat for storage.
Improved Lid Handles
The new lid handles are better designed and made from stainless so they are more robust and more ergonomic to hold especially with wet hands.
Two Stage Oversized Malt Pipe
This new malt pipe design is 30% larger meaning you can mash more grains and either make more beer or make higher gravity beers. the new malt pipe also has a two stage height adjustment so you hand half lift the malt pipe and set on the supporting halo ring halfway up. This makes it more ergonomical so you can lift the heavy malt pipe up in two stages but has the second advantage that it makes the brewery more suitable for smaller batches too where raising the malt pipe half way up is preferable.
From: Kegland
A replacement liquid (long) stainless keg dip tube suitable for Kegland Corny Kegs - 19L. Can be cut down to suit 9.5L. Comes with a dip tube o-ring.
Note: there are ridges (sometimes called ears) at the top for matching post holes, which make it unsuitable for corny kegs without these matching post holes.
Looking for just the o-ring? You'll find it here.
This Push-Fit fitting will allow you to connect 10mm OD line to keg couplers or any 5/8" thread.
Note that this is for 10mm diameter line - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
This Push-Fit Two-Way Divider will split the gas (or beer) line on your kegging system in two, allowing you to gas two kegs at the same time.
Note that this is 10mm diameter in and out.
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
This Push-Fit Elbow will allow you to join beer or gas line sections on your kegging system.
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
FermZilla - SS Ball Float & 80cm Silicone Dip Tube and Filter Kit. Suits Tri-Conical and All Rounder Models.
This simple design allows you to extract the clearest possible liquid in your pressure vessel with the added security of our new filter included. This helps prevent blockages in your carbonation cap poppet. As the liquid level decreases the float goes down at the same time. Perfect for sampling the sediment free!
This 80cm silicone dip tube and stainless steel float with filter suits the FermZilla Tri-Conical fermenter. Also compatible with Kegmenters and Modified Ball Lock Kegs (not minikegs).
From: Kegland
Clear lubrication gel for keg parts such as o-rings, couplers, party pumps. Use with plastic and rubber components to avoid cracks and extend their life. Just a little of this goes a long way.
Food grade keg lube is completely safe to use with all components. FDA listed, high quality, tasteless and odourless grease.
-
Food safe lube for keg parts
-
Use with both rubber and plastic parts to avoid easy damage
-
Long lasting
-
Keeps for years
Specifications
-
Food Grade lubricant is safe for all home brewery needs
-
Keeps rubber parts soft and supple
-
Helps prevent leaks
Size: 1oz (28g)
Made in: Germany
Service temperature: -20C to +45C
From: Krome Dispense
Mini Gauge 0-90psi for Integrated Blowtie and In-line regulators - Digital Illuminated
$24.95
Unit price perMini Gauge 0-90psi for Integrated Blowtie and In-line regulators - Digital Illuminated
$24.95
Unit price per
Digital Illuminated Mini Gauge 0-90psi (0-6.2bar) for Integrated Blowtie and In-line regulators.
Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle. This age old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue. With very small gauges such as a 27mm x 27mm Mini Gauge it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.
Kegland has developed this compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor. This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions is required.
Specifications:
Battery Life: More than 2 years (using the mini gauge once a day)
Battery Type: CR2032
Auto Battery Saver: Yes, screen automatically turns off after 15sec
Size: 27mm x 27mm
Radial O-ring Stem: 7.8mm Bore
NOTE: This gauge is not suitable for measuring pressure of liquids. It is only for measuring gas pressure. If liquid gets into the pressure transducer it will damage the gauge. If you want to measure liquid pressure you can purchase one of these analogue gauges:
This digital mini gauge can be used to upgrade your:
Blowtie Spunding Valve
Inline Regulator
Core 360 Mini Regulator
If you would like to use the mini gauge to attach to other hobbie projects then you should consider the Duotight Compatible Digital Mini Gauge with part number KL18081 that has the 8mm duotight push in stem. This makes it easy to fit to other 8mm duotight fittings, tubing etc.
From: Kegland
8mm OD Beer Line Tidy (BLT) - Beer and Gas Line Organiser.
This beer line tidy is a handle little part that will help you organise your beer and gas line inside your fridge, keezer, kegerator or cellar. Designed to suit 8mm outer diameter hosing like the 4mm x 8mm EVABarrier and 5mm x 8mm EVABarrier hosing.
Simply remove the paper and use the strong 3M adhesive to attach this beer/gas line organiser to whatever device you like.
This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works.
From: Kegland
Duotight 8mm x Flow Control Ball Lock Disconnect (Black-Yellow/Liquid).
This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact compared to the previous Stainless Steel Flow Control Ball Lock that has been discontinued due to the difficulty in repeated tooling and overall cost of raw materials.
The flow control ball lock disconnect is made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.
Why not a flow control tap/devices?
Flow control devices are good but they inherently can create a small amount of turbulence and therefore can cause foaming. In the past flow control taps have been the only common option. Flow control taps are popular, however they have the issue that due to the fact they are placed right at the end of the beer line they have no head pressure. As a result, any turbulence created can cause foaming and carbonation to come out of solution.
Flow control ball lock disconnects like these on the other hand, have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution. Even in the instance that high turbulence is created the beer will be far more resistant to foaming issues. For this reason flow control ball lock disconnects like these have significantly better performance, allowing you the flexibility to adjust line resistance easily but without the introduction of turbulence that creates foaming. It cannot fix over-carbonated beer, but it can reduce the amount of beer line you would need to pour without excessive foaming.
Some of the features include:
-
New POK Injection-moulded Design - Like all new Duotight push in fittings that Kegland bring to market, all of them are manufactured with polyketone plastic (POK). This aids in chemical resistance, tensile strength, and toughness.
-
Duotight push in - These Duotight ball lock disconnects already have the Duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the beer/gas line in and you are done!
-
Compact - The worlds most compact ball lock disconnect every manufactured. This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This is the only ball lock disconnect that allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.
-
Over moulded Poppet - The over moulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.
-
Tool-less Disassembly - Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.
-
Extreme Chemical Resistance - No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM over moulded poppet. This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.
-
Toughness - This ball lock disconnect is more robust than any other plastic ball lock disconnect ever manufactured due to the use of new engineering plastics. Don't be fooled by the small form factor - these bad boys are tough.
From: Kegland
A heavy dark rum full of molasses flavour
Ingredients: Water, Natural Flavour, Caramel, Preservative (202), Mollases
Flavours 5 litres
Manufactured in Auckland, New Zealand
A juicy refreshing Blood Orange flavoured Gin with a rich orange flavour and raspberry and strawberry overtones.
Ingredients: Water, Sugar, Natural Sweetener (951, 950), Colour (E122, E110, E102), Preservative (202, 211)
Manufactured in Auckland, NZ
50ml flavours 2.25 litres
Manufactured in Auckland, New Zealand
ATF Sabrodaze will leave you in a tropical hoppy daze. Loaded with Sabro (12.5g/L in the boil & approx. 13.6g/L in the dry hop) it has a wonderful tropical fruit aroma with pineapple to the fore and hints coconut in the background with a soft, almost creamy mouthfeel.
Yeast is not included in the kit. We recommend using Froth Vape (Assumed Origin: Boddington’s) to produce a juicy hazy with a silky mouthfeel and great hop aroma and flavour.
Alternatively we recommend using Verdant IPA. Lallemand’s Verdant IPA yeast. LalBrew Verdant IPA yeast will produce fruity esters and is well suited to NEIPA’s. Verdant IPA yeast expresses high amounts of β-lyase enzyme promoting biotransformation accentuating hop flavour and aroma. and also produces high amounts of glycerol producing a beer with a silky mouthfeel.
You could also try Froth Spectra (Assumed Origin: Unknown (London)).Spectra can produce a spectrum of radiant flavour & aroma while exhibiting an elegant ester profile and velvety mouthfeel.
Alternatively you could use Lallemand's New England yeast. Lallemand New England produces beers with a unique fruit forward ester profile, which is sought after in NEIPA's. Through expression of a β-glucosidase enzyme, LalBrew® New England can promote hop biotransformation and accentuate hop flavour and aroma.
Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.
ATF Sabrodaze will leave you in a tropical hoppy daze. Loaded with Sabro (12.5g/L in the boil & approx. 13.6g/L in the dry hop) it has a wonderful tropical fruit aroma with pineapple to the fore and hints coconut in the background with a soft, almost creamy mouthfeel.
Yeast is not included in the kit. We recommend using Froth Vape (Assumed Origin: Boddington’s) to produce a juicy hazy with a silky mouthfeel and great hop aroma and flavour.
Alternatively we recommend using Verdant IPA. Lallemand’s Verdant IPA yeast. LalBrew Verdant IPA yeast will produce fruity esters and is well suited to NEIPA’s. Verdant IPA yeast expresses high amounts of β-lyase enzyme promoting biotransformation accentuating hop flavour and aroma. and also produces high amounts of glycerol producing a beer with a silky mouthfeel.
You could also try Froth Spectra (Assumed Origin: Unknown (London)).Spectra can produce a spectrum of radiant flavour & aroma while exhibiting an elegant ester profile and velvety mouthfeel.
Alternatively you could use Lallemand's New England yeast. Lallemand New England produces beers with a unique fruit forward ester profile, which is sought after in NEIPA's. Through expression of a β-glucosidase enzyme, LalBrew® New England can promote hop biotransformation and accentuate hop flavour and aroma.
Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.
Need to clean your beer line, carbonate your unfizzy beer quickly, or simply want to take a traveller over to a mates? Then do yourself a favour and grab one of these essential tools for your brewing needs.
Liquid and Gas ball lock compatible.
You may need this fitting to connect to your 8mm OD tubing - Duotight - 6.5mm x 8mm Reducer.
Looking for the barbed version? You'll find it here.
CLEANING BEER LINES IN KEGERATOR
1. Acquire empty plastic PET bottle (e.g. 1.25L Coke Bottle)
2. Add cleaning solution for a 1L mixture
3. Add warm water to 1L
4. Attach Cleaning Cap to bottle
5. Attach Liquid ball lock disconnect connected to your tap to cap.
6. Turn on Tap with a jug or bucket underneath it to catch the beer/cleaning solution
7. Turn bottle upside down and squeeze (you can pressurise the bottle if you want so you don't have to squeeze, but this is just as fast and easy)
8. Wait until liquid out of tap runs clear, we recommend to wait 5mins with solution in the lines
9. Repeat 7-8 on other taps
10. Empty Bottle and fill with same temperature water, flush lines until you're satisfied there is no more cleaning solution
11. Hook up your beer line and pour away
TRAVELLERS
1. Fill beer from your tap, or if you have a Growler Filler tap or beer gun with a CO2 purge option, use that to purge 3 seconds worth of gas into the bottle (e.g. 1.25L Coke Bottle) to 3cm from the top. Beer will last considerable longer with a purge.
2. With one hand ready to screw the cap on, with your other hand squeeze the bottle until liquid is right on the brim. Then screw the cap on to make a seal.
3. Attach gas ball lock and add CO2 to the bottle to punch out the 3cm at the top of the bottle with CO2.
4. If you only finished half the bottle, squeeze out as much air as possible and fill with CO2.
QUICK CARBONATE
This can also be a great way to force carbonate your beer if its just been transferred to your keg and you don't want to wait! Remember your beer will absorb more CO2 the colder it is.
From: Kegland
Prevent gas or liquid leaks on your MFL connections with this Nylon Flare Washer Olive for MFL Fittings (1/4"). This washer fits inside MFL connections such as on the MKIII/MK4 multi gas regulators, MFL ball lock disconnects, barbed swivel nuts, and 8mm push fit MFL connectors.
From: Kegland
The ATF Celebration IPA places Centennial hops front and centre. Harking back to West Coast IPA’s of yesteryear, the ATF Celebration IPA has a light body with slight caramel tones and a firm bitterness leading to a dry finish. The Centennial hops are the star providing a prominent floral citrus flavour and aroma with notes of orange, grapefruit, and lemon.
Yeast is not included in the kit. We recommend using Froth Buddy (Assumed Origin: Sierra Nevada), or Lallemand's BRY-97 West Coast Ale Yeast. You could also try Safale US-05, Lallemand Nottingham High Performance Ale Yeast, or Mangrove Jack's West Coast Yeast.
The ATF Celebration IPA places Centennial hops front and centre. Harking back to West Coast IPA’s of yesteryear, the ATF Celebration IPA has a light body with slight caramel tones and a firm bitterness leading to a dry finish. The Centennial hops are the star providing a prominent floral citrus flavour and aroma with notes of orange, grapefruit, and lemon.
Yeast is not included in the kit. We recommend using Froth Buddy (Assumed Origin: Sierra Nevada), or Lallemand's BRY-97 West Coast Ale Yeast. You could also try Safale US-05, Lallemand Nottingham High Performance Ale Yeast, or Mangrove Jack's West Coast Yeast.
Sitting in between a pale ale and an IPA, the ATF Citrus XPA is a light bodied refreshing beer with plenty of flavour. It has a great citrus aroma with grapefruit being prominent and a smooth clean finish with a refreshing bitterness.
Yeast is not included in the kit. We recommend using Froth Buddy (Assumed Origin: Sierra Nevada), or Lallemand's BRY-97 West Coast Ale Yeast. You could also try Safale US-05, Lallemand Nottingham High Performance Ale Yeast, or Mangrove Jack's West Coast Yeast.
Sitting in between a pale ale and an IPA, the ATF Citrus XPA is a light bodied refreshing beer with plenty of flavour. It has a great citrus aroma with grapefruit being prominent and a smooth clean finish with a refreshing bitterness.
Yeast is not included in the kit. We recommend using Froth Buddy (Assumed Origin: Sierra Nevada), or Lallemand's BRY-97 West Coast Ale Yeast. You could also try Safale US-05, Lallemand Nottingham High Performance Ale Yeast, or Mangrove Jack's West Coast Yeast.
Full of luscious citrus and tropical fruit with a top note of pink grapefruit, the ATF Cosmic Jukebox will send your tastebuds into the stratosphere. Hopped at 6.25g/L in the whirlpool and dry hopped at a little over 20g/L, the ATF Cosmic Juicebox is a hop lovers dream.
Yeast is not included in the kit. We recommend using Froth Vape (Assumed Origin: Boddington’s) to produce a juicy hazy with a silky mouthfeel and great hop aroma and flavour.
Alternatively we recommend using Verdant IPA. Lallemand’s Verdant IPA yeast. LalBrew Verdant IPA yeast will produce fruity esters and is well suited to NEIPA’s. Verdant IPA yeast expresses high amounts of β-lyase enzyme promoting biotransformation accentuating hop flavour and aroma. and also produces high amounts of glycerol producing a beer with a silky mouthfeel.
You could also try Froth Spectra (Assumed Origin: Unknown (London)).Spectra can produce a spectrum of radiant flavour & aroma while exhibiting an elegant ester profile and velvety mouthfeel.
Alternatively you could use Lallemand's New England yeast. Lallemand New England produces beers with a unique fruit forward ester profile, which is sought after in NEIPA's. Through expression of a β-glucosidase enzyme, LalBrew® New England can promote hop biotransformation and accentuate hop flavour and aroma.
Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.
Full of luscious citrus and tropical fruit with a top note of pink grapefruit, the ATF Cosmic Jukebox will send your tastebuds into the stratosphere. Hopped at 6.25g/L in the whirlpool and dry hopped at a little over 20g/L, the ATF Cosmic Juicebox is a hop lovers dream.
Yeast is not included in the kit. We recommend using Froth Vape (Assumed Origin: Boddington’s) to produce a juicy hazy with a silky mouthfeel and great hop aroma and flavour.
Alternatively we recommend using Verdant IPA. Lallemand’s Verdant IPA yeast. LalBrew Verdant IPA yeast will produce fruity esters and is well suited to NEIPA’s. Verdant IPA yeast expresses high amounts of β-lyase enzyme promoting biotransformation accentuating hop flavour and aroma. and also produces high amounts of glycerol producing a beer with a silky mouthfeel.
You could also try Froth Spectra (Assumed Origin: Unknown (London)).Spectra can produce a spectrum of radiant flavour & aroma while exhibiting an elegant ester profile and velvety mouthfeel.
Alternatively you could use Lallemand's New England yeast. Lallemand New England produces beers with a unique fruit forward ester profile, which is sought after in NEIPA's. Through expression of a β-glucosidase enzyme, LalBrew® New England can promote hop biotransformation and accentuate hop flavour and aroma.
Please Note: Kettle finings are not provided with this kit as beer clarity is not required for this style of beer.
GCAST allows you to break free from Bluetooth® range limitations giving you more flexibility on your brew day. GCAST is a wireless device that bridges the connection between your G30 controller and the Grainfather App on your smartphone using your Wi-Fi network giving you a more reliable connection so you can brew with confidence.
- More flexibility during brew days with a more reliable connection when brewing with the Grainfather App
- Break free from Bluetooth® limitations using your home Wi-Fi network
- Sleek, multi textured design, that can be attached to any magnetic surface
- Quick and easy to set up with no additional equipment to get started
- View live Tilt data from anywhere and log it to your brew session with no additional hardware required
- Backed by a 3-year warranty
- Includes 1m Micro USB cable (wall charger not included)
SIZE:
- 45 x 45mm
WEIGHT:
- 30g
POWER:
- Input voltage: 5V
- Current: 0.8A
MAGNETIC:
- Yes
WATERPROOF:
- No
MINIMUM SUPPORTED MOBILE VERSION:
- IOS: 11
- Android: 8
The ATF Schwarzbier (black beer) is a light bodied lager beer with a mild roast character. An easy drinking beer with aromas of chocolate of coffee blending with a light noble hop aroma.
Yeast is not included in the kit. If fermenting cold we recommend using Froth Krisp (Assumed Origin: Weinhenstephan), Fermentis SafLager W-34/70, or Lallemand Diamond Lager Yeast.
If fermenting warm we recommend using Fermentis SafLager W-34/70 or Mangrove Jack's Californian Lager Yeast.
Mangrove Jack's Californian Lager Yeast
Mangrove Jack's Californian Lager yeast is a unique lager strain that has the ability to ferment at ale temperatures and still provide a typical lager flavour profile.
Fermentis SafLager W-34/70
Sensory testing performed by Fermentis on W-34/70 shows that it is a very robust yeast capable of providing a clean neutral flavour profile across a wide range of fermentation temperatures (12℃ - 20℃). Click here to download the Fermentis iPhone app for more information.
The ATF Schwarzbier (black beer) is a light bodied lager beer with a mild roast character. An easy drinking beer with aromas of chocolate of coffee blending with a light noble hop aroma.
Yeast is not included in the kit. If fermenting cold we recommend using Froth Krisp (Assumed Origin: Weinhenstephan), Fermentis SafLager W-34/70, or Lallemand Diamond Lager Yeast.
If fermenting warm we recommend using Fermentis SafLager W-34/70 or Mangrove Jack's Californian Lager Yeast.
Mangrove Jack's Californian Lager Yeast
Mangrove Jack's Californian Lager yeast is a unique lager strain that has the ability to ferment at ale temperatures and still provide a typical lager flavour profile.
Fermentis SafLager W-34/70
Sensory testing performed by Fermentis on W-34/70 shows that it is a very robust yeast capable of providing a clean neutral flavour profile across a wide range of fermentation temperatures (12℃ - 20℃). Click here to download the Fermentis iPhone app for more information.
The ATF German Pils is a clean and crisp light bodied beer with a pleasant mild grainy malt sweetness superbly balanced with a refreshing bitterness and dry finish. Hallertau Mittlefruh hops provide a classic noble hop aroma with notes of fresh hay, sweet spices, and dried flowers.
The ATF Schwarzbier (black beer) is a light bodied lager beer with a mild roast character. An easy drinking beer with aromas of chocolate of coffee blending with a light noble hop aroma.
Yeast is not included in the kit. If fermenting cold we recommend using Froth Krisp (Assumed Origin: Weinhenstephan), Fermentis SafLager W-34/70, or Lallemand Diamond Lager Yeast.
If fermenting warm we recommend using Fermentis SafLager W-34/70 or Mangrove Jack's Californian Lager Yeast.
Mangrove Jack's Californian Lager Yeast
Mangrove Jack's Californian Lager yeast is a unique lager strain that has the ability to ferment at ale temperatures and still provide a typical lager flavour profile.
Fermentis SafLager W-34/70
Sensory testing performed by Fermentis on W-34/70 shows that it is a very robust yeast capable of providing a clean neutral flavour profile across a wide range of fermentation temperatures (12℃ - 20℃). Click here to download the Fermentis iPhone app for more information.
