Sort by:
Handcraft Supplies fermenter set containing a 30L bucket with lid and accessories, ready to ferment. Includes litre markers down the side. Use for primary or secondary fermenter, or even as a bottling bucket.
This kit is made up of:
Stick-on Thermometer Strip
Bubbler Airlock
Top Hat Grommet
Sediment Reducer
Tap
30L Fermenter + Lid
A brewing heater belt that fits around your fermenter to provide steady and constant warmth for your brew. The 30 watts will gently warm without creating a hot spot, and can be moved up or down the fermenter to increase or decrease the heat transfer to the brew.
To further control the temperature of your fermentation, combine with a RAPT Temperature Controller or similar to regulate the heater belt automatically.
Note: fermenter not included.
From: Kegland
Fermentation Heating Wrap Belt - With Velcro Strap (30watts) 220-240VAC (50-60hz)
Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty.
Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile.
To further control the temperature of your fermentation, combine with a RAPT Temperature Controller or similar to regulate the Heating Wrap Belt automatically.
Features:
- Easy to use
- Handy velcro strap
- Low watt density
- Durable vinyl coating
- 30 watt gentle heating
- Great for fermenters or bottle conditioning
- Sit on top or wrap around your fermentation vessel
Dimensions: approx. 1000mm x 250mm
From: Kegland
Infrared Thermometer Gun -50C to +580C (Black)
This thermometer gun has a built-in Dual laser that can be switched On and Off. Dual laser is an important feature when choosing infrared thermometers because it allows for much higher accuracy of readings. When measuring an object a Dual Laser will help greatly in finding the convergence point of the measured target and the spot ratio, which can only be achieved with Dual Laser.
Features:
- Double Laser pointer for accurate target aiming
- Simple one-handed operation
- Laser ON/OFF Switch
- Low battery indication
- LED backlight system for operation under poor illumination
- C° / °F temperature unit conversion
- Automatic Power off in 15 seconds without any operation
- Display hold, scan function
Note:
1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly.
2. If you want to use boiled water to measure the quality of the product, please note that when measuring boiling liquids, do not allow smoke or water vapour to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.
Specifications:
- Temperature Range: -50 to 550°C
- Accuracy: ± 2% or 2°C
- Distance Spot Ratio: 12:1
- Emissivity: 0.1~1.0(Adjustable)
- Response Time Wavelength: 500ms & (8-14) um
- Repeatability: ± 1% or 1°C
- Resolution: 1°C or 1°F
- Storage Temperature: -20-50°C
- Operating Temperature: 0-50°C
From: Kegland
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits.
Heat Pad SpeCraft Series:
- Provides low, constant heat where it is needed for fermentation.
- Aids yeast activity and helps avoid stuck fermentation.
- Inexpensive to run.
- Voltage: 220-240V
- Power: 25W
- Colour: White
100mm silicone tube for connecting the 30 L Wide Mouth Fermenter Tap to a brew bottler for straight forward transfer. Made with food grade silicone.
A mix-stir agitator rod makes aerating in a carboy a breeze. Simply attach the agitator rod to your drill and you are ready to go. The blades fold up for easy insertion into any sized carboy (except 5L or under).
De-gas your wine in a few minutes, or aerate your wort for a healthy fermentation.
The mix-stir is very effective at de-gassing your wine although it should not be used for more than a few 10-15 second bursts. If you over-use the mix-stir you risk adding oxygen to your wine.
Premium quality pH solutions from Hanna Instruments for calibrating your pH meter. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
Usually available for these pH levels: pH 4.01, pH 7.01
Reported values are accurate to +/- 0.01 pH at 25°C.
From: Hanna Instruments
Size: 500ml
A 12L plastic bucket fermenter set with tap that is perfect for small batches.
Dimensions (approx.): 410mm x 250mm
Kit contains the following:
- 12L Clear Fermenter Body with side hole (20mm - 23mm)
- 12L Blue Fermenter Lid
- EZ Filter - Still Tap (Boil proof)
These are great to use for wine and beer making but are also good storage containers for spirits.
The Rubber Stopper #10 fits the carboy perfectly.
A 23 litre plastic carboy (bottle) suitable for fermenting beer, cider, wine, or spirits.
The Rubber Stopper #10 fits this carboy.
This 5L Plastic Carboy is made from alcohol-safe plastic and includes a lid. These are great for fermenting meads, cider, wine and spirit wash or as storage containers for spirits.
Yellow RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth).
The RAPT Pill allows true real-time specific gravity and temperature logging and control via wifi/bluetooth integration with the RAPT fermentation chamber, RAPT mobile app or RAPT IOT.
The RAPT Pill allows you to instantly read and log the specific gravity and temperature of your fermentation via the RAPT mobile app on your compatible Android smartphone or tablet, Apple iPhone/iPad or via the RAPT IOT hub on your Windows or Mac Computer.
The RAPT Pill has a long battery life and can last 2-5 months between charges when utilising Wifi. If only using Bluetooth the the battery can last 2+ years before needing to be recharged. The RAPT Pill has a USB-C charging port on the circuit board allowing fast charging from any USB-C cable. Alternatively you can purchase the Wireless Charging Kit so you charge your pill without needing to take it apart.
The RAPT Pill is universal and is compatible with most standard carboys, cornelius kegs, stainless steel fermenters and pressurisable fermenters.
Pill Housing Design
The RAPT Pill housing boasts many advantages compared to other wireless hydrometers such as:
- Made from strong BPA Free Tritan Plastic
- Greater ergonomics - The shape of the RAPT Pill has been designed for improved usability compared to other wireless hydrometers such that the Pill seperates into two pieces at the midline of the Pill rather than requiring a difficult to remove end cap to be unscrewed.
- Sanitary design - The RAPT Pill has no exposed thread and a double o-ring seal which allows for a water-tight seal with reduced risk of infection.
- Less susceptible to error - The larger housing of the RAPT Pill compared to other wireless hydrometers means that the gravity logging is less susceptible to error from krausen, hops or CO2 bubbles from fermentation.
Different housing colours are sold separately, allowing customisation of your RAPT Pill.
Specifications:
The RAPT Pill is approximately 37mm x 125mm - compact enough to fit almost anywhere!
What is RAPT?
The RAPT IOT Hub is a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notification in the off instance that something doesn't go to plan.
There is no limit to the number of RAPT devices you can connect the RAPT IOT Hub. This is in contrast to other popular wireless hydrometers where you are limited by the number of hydrometers you can connect to an app.
RAPT Pill - Blue Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
RAPT Pill - Clear Housing (Male Threaded - Bottom Piece).
Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.
RAPT Pill O-Ring sold separately.
From: Kegland
RAPT Pill - Green Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
RAPT Pill - Red Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
A replacement silicone o-ring for the RAPT Pill.
It is always wise to have a few spares in case some get pinched when tightening up the RAPT Pill.
Sold individually.
From: Kegland
Charge your Pill wirelessly with this easy-to-install upgrade kit from Kegland. The RAPT Pill is a Wifi & Bluetooth hydrometer for logging fermentation to the cloud.
This easy to install kit allows you to wirelessly charge the Pill, and also access the Pill Captive Portal without needing to open the housing to access the USB-C port!
Includes:
1 x USB-C Wireless Charging Coil
2 x Adhesive Weight Pads
1 x USB-A to USB-C cord (AU power plug not supplied)
1 x Black RAPT Wireless Charging Dock (USB-C)
If the green light does not flash green (captive portal open), it means your battery is insufficiently charged. Leave your pill on the charging pad for 24 hours or until it is fully charged (red light turns off). Then lift the Pill on and off the charging pad and it will activate the captive portal (green light will start to flash).
Note: RAPT Pill sold separately, this is for the wireless charger only.
From: Kegland
A rubber stopper (bung) with a diameter of approximately 50mm across the top, tapering to a diameter of approximately 41mm at the bottom. Fits the 23 Litre Plastic Carboy and 11.5 Litre Plastic Carboy.
The Smell Eliminator Kit completely eliminates ALL smells from the fermentation process for both beer and spirits.
Includes everything you need to attach to a standard fermenter with airlock (airlock not included).
Now you can ferment wherever is best to maintain your desired fermentation temperature without worrying about the smell.
The carbon cartridge for the Smell Eliminator Kit is made from a specially designed dense carbon block, which will last for approximately 5 brews or washes. Will not filter liquids.
Made from 304 stainless for hygiene and will last a lifetime.
Instructions: The Smell Eliminator Kit
A replacement carbon cartridge for the Smell Eliminator Kit. Made from a specially designed dense carbon block, it will last for 5 brews or washes. Will not filter liquids.
A replacement mecanicco swing lid for the 5L Glass Jar Demijohn with mecanicco Swing Lid. Not suitable for the 5L Glass Jar Demijohn with Screw Cap/Lid.