Sort by:
A Hygiene Plug for beer faucets to help keep beer taps clean. Protects taps from fruit flies and contamination when not in use. Eliminates the time and waste of wrapping beer taps overnight.
Fits most types of beer taps. Do not completely plug Intertap/Nukatap taps.
Note: colour may vary.
From: Krome Dispense
Take the work out of cleaning corny kegs, carboys and brewing vessels with the Bucket Blaster keg and fermenter cleaner. The Bucket Blaster is a great way to get your kegs, fermenters, fermzilla, carboy's or other brewery gear clean while you attend to other tasks.
Simply set up the keg washer basin with your cleaner or sanitiser, set a keg or carboy on over the jet nozzle, power up pump and let the keg washer do the work.
This unit comes with a 15L bucket which doubles as a storage container when you are not using the system. Some other keg washers come with a very small reservoir making it a pain to move, liquid spills over the sides easily and generally they just do not work as well. This unit has a large 15L bucket making it much less likely for you to spill liquid on your floor.
This system includes a 2000 litre per hour pump, the 15L bucket, a powerful jet nozzle, 3/8 EVABarrier tubing, a Duotight tee piece, a grey and a black ball lock disconnect and the stainless stand.
You can find instructions on how to assemble, operate, and maintain the bucket blaster here.
From: Kegland
NZ Made PBW Alternative
Alkaline powder, cleaner and sanitiser
CLARK PROCESS CS is a specially formulated alkaline powder cleaner and sanitiser primarily designed for pipelines and associated equipment in food manufacturing, brewing, and wine industries. It is non caustic and contains active oxygen ingredients to safely and effectively remove protein soils.
Directions for use
Use at a rate of 10g - 20g per litre of hot water.
Pump or circulate through lines to be cleaned for at least 10 minutes and then drain. Rinse well with cold water and drain. Safe for use on all metals and plastics, however spot testing is recommended.
Net contents: 2kg
Made in New Zealand.
The Avvinator Bottle Rinser allows you to inject cleaners and sanitisers into inverted bottles. The liquid is returned to holding reservoir for re-use, eliminating waste.
- Easily Sanitise Beer and Wine Bottles
- Uses Less Cleaner or Sanitiser
- Fits on Top of Drying Tree ( fits the 45 and 90 post deluxe bottle trees, does not fit the 45 post "economy" tree.)
- Press Bottle Down on Nozzle to Activate
- Jet Spray Coats Entire Bottle Surface
Economy 81 seat bottle tree with carrying handle made by Ferrari Group in Italy. The layers of the Economy bottle trees screw together for a very strong and stable unit. Due to the handle you cannot set a sanitiser injector on top.
- Holds up to 81 bottles
- Can be used for beer or wine bottles
- Rotating base to easily load and unload bottles
This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the counter flow wort chiller, pipes and pumps.
This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.
Instructions
- Add 2 Tbsp of cleaner to 15 L of water at 60°C to your Grainfather.
- Attach the counter flow wort chiller and recirculate the cleaner for 15 minutes.
- Remove the counter flow wort chiller and attach the recirculation pipe and recirculate for another 5 minutes.
- Rinse all surfaces that came in contact with the cleaner thoroughly with water.
- Gently scrub the inside of the boiler with a soft bristle brush to remove left over stains.
- Rinse and drain.
Mangrove Jack's ECD Cold Water Detergent effectively cleans and deodorises everything you use for brewing, winemaking and distilling. Cold Water ECD Cleaner Detergent is a powerful cleaner removing dirt, stains and undesirable micro-organisms, restoring your surface to its original condition.
Cleaning plays an essential role in good brewing, wine making, and distilling. You should always clean your equipment prior to sterialising.
Mangrove Jack's No Rinse Sanitiser effectively sanitises brewing, wine making, and distilling equipment.
Unlike conventional alkaline powdered sanitisers, Mangrove Jack's No Rinse Sanitiser requires no rinsing. It makes the vital job of sanitising equipment easy and effective. It utilises active oxygen, which breaks down to leave only oxygen, water, and minerals found naturally in water.
Contains: Sodium Percarbonate 880g/kg
Liquid Circulation Cleaner - a non-chlorinated caustic for cleaning beer lines.
- Removes beer and beverage soils and other off-flavour producers from beer lines.
- Heavy-duty, liquid, caustic.
- Low-foaming.
- Can be used in both hot and cold applications.
- Will withstand storage temperatures as low as 0°C.
Recommended for hot and cold process CIP cleaning circuits.
- Mix solutions according to equipment and application CIP: 2-9 quarts of LCC per 50gal. of water. Brew Kettles: 2oz. of LCC per gallon of water. Heat Exchangers: 3-4 oz of LCC per gallon of water.
- Circulate for 30 minutes at temperatures between 70°-80° (must be 80° if for heat exchanger).
- Rinse with water.
From: Five Star Chemicals, USA
Low Volume CIP Spinning Spray Rotor (stainless swivel nut and barb).
Introducing the new Low Volume CIP Spray motor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day.
- Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units)
What can it do?
Clean In Place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to.
Specifications
1 x Custom molded rotating spray head with 1/2" BSP thread
1 x 300mm length silicon tubing suitable for your BrewZilla recirculation arm
1 x Stainless nut and barb
Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down.
From: Kegland
PBW is an alkaline, non-caustic, environmentally and user friendly cleaner. This is the powder product - we also have the liquid and tablet form.
PBW is a buffered alkaline detergent that has been proven to be more than an effective substitute for caustic soda cleaners. Because of its unique formulation of buffers and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminium, and on plastics. PBW uses active oxygen to penetrate carbon or protein soils and is not effected by hard water.
PBW has been formulated as a clean in place (CIP) cleaner and is very effective in removing protein soils found on brew kettles, fermenters, conditioning tanks, filters and all packaging areas. The concentrations to remove these soils are typically in the 1% range. However, due to soil and water conditions this concentration will vary. To help in hard water areas PBW has been formulated with enough chelators to tolerate hard water over 17 grains (approx. 291mg calcium carbonate per litre).
PBW is an excellent choice as a soak cleaner because it does not require excessive heat as do most caustic based cleaners. This product has cleaned brass and copper filters, and industrial aluminium surfaces successfully.
Benefits
- Replaces Caustic Soda cleaners
- Effective at All Temperatures
- Free Rinsing
- Safe on Polycarbonate surfaces
- Safe to handle
- Generates 4 - 5% Oxygen
- Non-hazardous & Non-corrosive
- Excellent hard water tolerance
- Removes protein soil and staining, baked on carbon, and fatty acids
GENERAL USE DIRECTIONS
CIRCULATION CLEANING: Use 1 to 3 ounces per gallon depending on soil load. This converts to approximately 6.15gm to 22.50gm per litre. Heat to 130°F (54.5℃) to 180°F (82℃) for 30 minutes.
CARBON REMOVAL: Use 6 to 8 ounces per gallon of water. This converts to approximately 45gm to 60gm per litre. Heat to 140°F (60℃) for 4 hours or allow to soak cold overnight.
When using PBW in food processing areas the equipment that has been cleaned must be rinsed with potable water and sanitised prior to use.
PBW is an alkaline, non-caustic, environmentally and user friendly cleaner. This is the liquid product - we also have the dry powder and tablet form.
PBW is a buffered alkaline detergent that has been proven to be more than an effective substitute for caustic soda cleaners. Because of its unique formulation of buffers and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminium, and on plastics. P.B.W. uses active oxygen to penetrate carbon or protein soils and is not effected by hard water.
PBW has been formulated as a C.I.P. cleaner and is very effective in removing protein soils found on brew kettles, fermenters, conditioning tanks, filters and all packaging areas. The concentrations to remove these soils are typically in the 1% range. However, due to soil and water conditions this concentration will vary. To help in hard water areas PBW has been formulated with enough chelators to tolerate hard water over 17 grains.
PBW is an excellent choice as a soak cleaner because it does not require excessive heat as do most caustic based cleaners. This product has cleaned brass and copper filters, and industrial aluminium surfaces successfully.
Benefits
- Replaces Caustic Soda cleaners
- Effective at All Temperatures
- Free Rinsing
- Safe on Polycarbonate surfaces
- Safe to handle - Generates 4
- 5% Oxygen
- Non-hazardous & Non-corrosive
- Excellent hard water tolerance
- Removes protein soil and staining, baked on carbon, and fatty acids
Liquid PBW Highlights:
- Mixes into solution even at lower water temperatures
- Removes tough stains and soils with less scrubbing
- Quickly mixes into solution
- Can be used for a wide range of applications, but is especially effective with canning lines and keg cleaners
- 1-2 oz. (30-60ml) per gallon of water
Manufacturer: Five Star Chemicals
Country: USA
Powdered Brewery Wash is an alkaline, non-caustic, environmentally and user friendly cleaner. This is the tablet product - we also have the dry powder and liquid form.
PBW is a buffered alkaline detergent that has been proven to be more than an effective substitute for caustic soda cleaners. Because of its unique formulation of buffers and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminium, and on plastics. P.B.W. uses active oxygen to penetrate carbon or protein soils and is not effected by hard water.
PBW has been formulated as a C.I.P. cleaner and is very effective in removing protein soils found on brew kettles, fermenters, conditioning tanks, filters and all packaging areas. The concentrations to remove these soils are typically in the 1% range. However, due to soil and water conditions this concentration will vary. To help in hard water areas PBW has been formulated with enough chelators to tolerate hard water over 17 grains.
PBW is an excellent choice as a soak cleaner because it does not require excessive heat as do most caustic based cleaners. This product has cleaned brass and copper filters, and industrial aluminium surfaces successfully.
Benefits
- Replaces Caustic Soda cleaners
- Effective at All Temperatures
- Free Rinsing
- Safe on Polycarbonate surfaces
- Safe to handle - Generates 4
- 5% Oxygen
- Non-hazardous & Non-corrosive
- Excellent hard water tolerance
- Removes protein soil and staining, baked on carbon, and fatty acids
Tablet PBW Highlights
- Easy Dosing - 1 tablet for every 32 oz (approx. 1 litre) of water for 2.5 g cleaning tablet, or 1 tablet for every gallon (approx. 4 litres) of water for 10g cleaning tablets
- Removes Stubborn Stains - Tackle organic materials and stains with this non-caustic, alkaline based cleaner
- Versatile Applications - This tablet can be used to clean all types of equipment. Great for carboys, kettles, growlers, kegs, spray bottles, and so much more
- Wide Temperature Range - Has the cleaning power to work at low and high temperatures
- Effective in Hard and Soft Water - Specifically formulated for brewing, this a robust cleaning ability is a variety of environments
Manufacturer: Five Star Chemicals
Country: USA
Potassium metabisulphite is used to introduce sulphur dioxide into wine. Small quantities of sulphur dioxide are used to control wine microbes, and sulphur dioxide also reduces wine oxidation. When sulphite is added to wine, it produces about half its weight in SO2 (about one gram of sulphur dioxide is produced when two grams of sulphite are added to the wine).
Here is a link to an excellent article on the use of metabisulphate.
Saniclean is a low-foaming, acid based, final rinse sanitiser.
- Effectively removes odours and flavours especially from draft lines or other dispensing products.
- Great for both CIP and manual applications.
- Not to be used on soft metals such as aluminium.
Instructions:
- Thoroughly clean surfaces with PBW or compatible cleaner.
- Mix 2 oz. (60ml) Saniclean for every 5 gal. (19L) of water. (Will be low-foaming)
- Apply on surface with cloth, mop, sponge, spray, or immersion.
- If using spray application, use a coarse mist, pump, or trigger sprayer and spray 15-20cm from surface and follow up with a brush or sponge.
- Allow for contact time of at least 2-3 minutes.
- Drain, but do not rinse.
From: Five Star Chemicals
Sodium Metabisulphite is a sulphur based compound that is used primarily to sterilise wine and cider making to kill bacteria and to inhibit the growth of most wild yeast.
It can also be used to eliminate both free chlorine and the more stable form, chloramine, from water.
One gram of metabisulphite will impart approximately 60 parts-per-million of sulphur dioxide (SO2) to each litre of wine.
As a guide, to sanitise wine must add 0.2 g of metabisulphite per litre of juice. Pre-dissolve it in a small quantity of water before adding to the must. Allow the must to ventilate in an open container for 24 hours before adding yeast.
Here is a link to an excellent article on the use of metabisulphate.
Sodium Metasilicate, often called Brewers' Detergent, is a powdered alkaline cleaner that helps remove dirt, mould, hop oils off your brewing gear and labels off glass bottles. It is often a component of many branded brewery cleaners.
Use at a rate of around 10g per litre of water.
Sodium percarbonate is a very good general purpose cleaner and mild sanitiser. When mixed with warm water it forms hydrogen peroxide, which has an oxygen bleaching effect removing stains and organic matter such as yeast residue and sanitising exposed surfaces.
Over time, sodium percarbonate breaks down into oxygen and water, so there is no need to rinse the product. In order to effectively sanitise, surfaces must be free from all organic material.
Use at a rate of 5g per litre. Ensure coverage over all surfaces that require sanitising. For best results allow wet surfaces to stand for at least 10 minutes.
Star San is a no rinse sanitiser made from a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend provides a unique killing system that is unaffected by excessive organic soils.
Star San is also a self-foaming sanitiser. It can be applied through a foamer to produce self-adhering sanitising foam for external sanitation. Star San is also an excellent sanitiser for hand application. Sanitising with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting. It is not recommended to use Star San on soft metals because of the acid nature of this product.
BENEFITS
- Broad Spectrum Bactericide and Fungicide
- Not Affected by Organic Materials
- No Rinse Requirement When Used at 300 ppm
- Accepted by U.S.D.A. as a General Sanitiser in all Departments
GENERAL USE DIRECTIONS
All surfaces should be cleaned and rinsed before sanitising with Star San.
Directions: At a dilution rate of 1 ounce (29.57ml) to 5 gallons (18.93L) of water, Star San will provide 300 ppm of dodecylbenzenesulfonic acid. After 1 to 2 minutes contact time, drain sanitising solution from equipment thoroughly. Do not rinse. If using Star San in CIP, proper water balance must be maintained or your pump may cavitate. If used at a rate of more than 300 ppm, a potable rinse is required.
StellarSan Sanitiser 500mL - 100% Food Grade non-rinse sanitiser that can be diluted to 333L with the dual chamber mixing bottle compartment. Simply twist off the small measuring compartments lid, squeeze the bottle and it will start to fill that chamber only.
Even when you're finished sanitising your products in a bucket for example, you can still re-use the sanitiser over and over again. Making it a no brainer for your brewing sanitising needs and the cost to you is greatly reduced.
The new and improved phosphoric acid blend provides a unique microorganism killing system, unaffected by organic soils and delivering a high foaming formulation with optimum coverage and penetration. It is perfect for sanitising your brewing equipment and surface areas. Not suitable for use on wood, unglazed porcelain or other porous materials. It is also not suitable for use on soft metal such as aluminium, copper or brass.
Please note that foam is okay! Pour your wort directly onto the foam as this is a foaming non-rinse formulation. The formula can be metabolised by the yeast and will act as a nutrient assisting yeast growth. Follow this procedure and it will not impart any off-odours or flavours.
Unlike other harsh chemical sanitisers, StellarSan is non-staining, and stable over a wide range of temperatures.
Phosphoric acid, which is in this formulation, also helps keep your stainless in good condition and will improve the stainless properties.
Use at a dilution rate of 1.5ml per litre.
Dilute to approximately 10g per litre.