Sort by:
A 1/2 inch ball valve assembly with a maximum operating temperature of 200℃ consisting of:
- 316 Stainless Steel 1/2 inch hex nipple
- 316 Stainless Steel 1/2 inch 2pc ball valve
- 316 Stainless Steel 1/2 inch male hosetail
Perfectly suited for use with the G70 and G40 to allow quick drainage from the bottom of the unit.
We recommend using thread tape to ensure a complete and leak proof seal.
BrewZilla 35L False Bottom (Pump Filter).
This attachment stops particulates from blocking your pump and getting into your beer!
Suitable for the 35L BrewZilla and Digiboil.
Newly designed BrewZilla Reinforced False Bottom which is stronger and has a tighter fit resulting in less trub and hop matter getting past the False Bottom and blocking the pump or getting into your final beer!
It can also be used on the 35L DigiBoil as a false bottom.
Not suitable for the Grainfather G30.
From: Kegland
This is the redesigned perforated grain basket for the G30 Brewing System which removes the need for a top plate and additional pipework. This basket comes as a standard with the G30v3 but can be purchased as an upgrade for previous versions of the G30 Brewing System.
Whats Included
- 1 x G30 Perforated Basket
- Bottom Grain Plate
- Silicone Recirculation Hose
Specifications
- Up to 8 kg (18 lb) grain capacity*
- Maximum batch size of 25 L of wort
- 304 Stainless Steel
*Grain capacity can reach 9 kg with a top plate (sold separately).
GCAST allows you to break free from Bluetooth® range limitations giving you more flexibility on your brew day. GCAST is a wireless device that bridges the connection between your G30 controller and the Grainfather App on your smartphone using your Wi-Fi network giving you a more reliable connection so you can brew with confidence.
- More flexibility during brew days with a more reliable connection when brewing with the Grainfather App
- Break free from Bluetooth® limitations using your home Wi-Fi network
- Sleek, multi textured design, that can be attached to any magnetic surface
- Quick and easy to set up with no additional equipment to get started
- View live Tilt data from anywhere and log it to your brew session with no additional hardware required
- Backed by a 3-year warranty
- Includes 1m Micro USB cable (wall charger not included)
SIZE:
- 45 x 45mm
WEIGHT:
- 30g
POWER:
- Input voltage: 5V
- Current: 0.8A
MAGNETIC:
- Yes
WATERPROOF:
- No
MINIMUM SUPPORTED MOBILE VERSION:
- IOS: 11
- Android: 8
This kit replaces the stainless steel elbow on the GF30 dual valve with a threaded stainless steel elbow and a "Push Fit Fitting Stainless Steel (304) - 3/8 Inch Male Thread - 8mm Push Fit" making it easy to connect standard 8mm OD beer line.
To perform a closed transfer to a keg simply connect 8mm OD beer line connected to a Barbed Beer Ball Lock Disconnect, or a MFL Beer Disconnect Ball Lock Disconnect with a Duotight 8mm - MFL Connector, or a Ball Lock Beer Duotight Disconnect, and connect to the beer out post of the keg.
This kit consists of:
- BSP Male to Female Elbow 90º - 3/8 Inch - Stainless Steel
- Push Fit Fitting Stainless Steel (304) - 3/8 Inch Male Thread - 8mm Push Fit
We recommend using thread tape to ensure there are no leaks.
The Grainfather Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates when using either using the Grainfather Glycol Chiller or Cooling Pump Kit to lower the fermenter’s temperature.
Features:
- Made from high quality 5mm thick SBR foam.
- Consists of two independent sections for both the main body and the fermenter cone for total coverage.
Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile.
To be able to cool with the Grainfather Conical Fermenter, you need to have the Conical Fermenter Temperature Controller. Then once your target temperature is below the temperature of the wort in your fermenter the Cooling Pump Kit pumps ice cold water through the double walled insulated interior to cool down your wort.
Simply connect the couplers and insulated hoses to the Conical Fermenter, submerge the submersible pump into a cooler box with water (add ice for your required temperature) and pump the liquid through the insulated cooling sleeve of the Conical Fermenter body.
Whats Included
Conical Fermenter Cooling Pump (submersible)
T-section power connector
2 x brass couplers
Specifications
Rated 12 VDC – 4.8 Watts
The Grainfather digital Temperature Controller replaces the temperature display. With this you can control the heating and the cooling (if you have the Grainfather Glycol Chiller) of your fermenter by dialing in a temperature or even setting a temperature schedule (can set up to 5 stages). This snaps on easily via magnets and pogo pins with no extra cords or clutter.
Specifications
Control the heating element and Glycol Chiller (available separately)
Choose between imperial and metric (C° & F°)
Total of 4 fermentation profiles with up to 5 steps each (2 are pre-set for a lager and an ale, 2 are custom)
Hysteresis is customisable and able to be set at 0.1 intervals between a range of 0.1°C – 1.9°C & 0.2°F - 2.9°F (the default setting is 0.5°C)
Automation without removing the fun of brewing, be as involved as you want to be! More automation means you can multitask or simply relax while brewing and then be alerted when to return for your next step.
Use the G30 Controller in conjunction with the Connect App (and the recipe creator) for the ultimate brewing experience.
Control Box Features:
- Bluetooth connection to your mobile device so it can be controlled remotely
- PID algorithm works in conjunction with a triac for more stable heating and so you can control power output
- Programmable step mashing
- Delayed heating - fill your Grainfather with water the night before and wake up to your water at strike temperature ready for brewing straight away
- Change between celsius and fahrenheit easily
- Waterproof graphic display
- Lugs at rear which can be changed to suit any Grainfather currently on the market
- Use in manual mode or with app
App Features:
- Grainfather Grain Kit recipes provided in app
- Import Beer XML files
- Set your own boil temperature (for different altitudes)
- Change between celsius and fahrenheit easily
- Grainfather calculators provided in app
Online recipe creator - create, share, rate and review brews through this central hub. Then when ready, sync with your app.
View the instructions online
The Grainfather counterflow chiller is used after boiling the wort to cool it down fermentation temperature. The counterflow does this by acting as a heat exchange between the wort and water from your tap as you transfer the wort from your boil kettle to your fermenter. Because this is a one-step process of transferring and cooling, it is more efficient and more sanitary than immersion chillers, and the curved design allows for similar performance to plate chillers without the crevasses that can make cleaning painful.
Features
- One step transferring and cooling
- Fast cooling time to within 3C of source water temperature.
- More sanitary transferring
- Copper inner coil for high heat exchange
- Compatible with a range of brewing systems
Includes
- Counterflow chiller
- G30 connector
- 9mm right angle hose barb connector for G40, G70 and other brew systems
- Tap adapter set for connection to garden hoses and most faucets
Specifications
- Copper inner coil
- 9mm ID inlet and outlet hoses
- Colour coded hoses for inlet and outlet water
The Electric Grain Mill is motorised, compact and easy to use at home. It’s equipped with large, fluted rollers that crack the outer husk of the grain longitudinally, providing optimal surface area for your mash and a better filter bed for your sparge.
The removable grain hopper holds up to 1kg of grain at a time and with 10 easily adjustable gap settings, ranging from 0.8mm to 2mm, this mill has been engineered to crush a variety of grains. Crush different base malts and specialty grains, and even change the rate that your grain is crushed with the variable speed dial.
It’s easy to mount onto a workbench or bucket, but it works best with the Grain Mill Bamboo Mounting Board. Plus, the mill is easy to assemble thanks to its built-in motor and compact design. Simply attach the grain hopper. Set your desired gap setting by pulling the spring-loaded pin and rotating the dial. Add grain to the hopper and flick the switch to begin crushing.
For more information on assembling and using the Electric Grain Mill, watch our YouTube video here.
Now you can create fresher batches of beer by bulk buying your own grain and crushing it at home, just before you brew.
Specifications
- Voltage: 220 - 240V
- Frequency: 50Hz
- Power: 400W
- Rollers: 58mm diameter and made of hardened stainless steel with a flute design that’s akin to commercial grain mills
- 10 mill gap settings: 0.8mm - 2mm
- Crush rate: up to 1.7kg of grain per minute
- Grain hopper capacity: 1kg
The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation
It provides an accurate reading in both Celsius and Fahrenheit.
A set of tap adapters to enable tubing for the Grainfather Counterflow chiller to be connected to an indoor or out door tap.
Could also be used to connect tubing for other equipment, such as the Filter - Beer & Water Filtering System, to an indoor or out door tap.
Upgrade the Grainfather G30 Brewing System with the G30 Hop Plate, a purpose-built false bottom style hop plate filter for use with all G30 Brewing Systems. Install alongside the system's current filter for increased efficiency in hop filtration.
How to Use:
1. Install the G30 Filter (this is the hop filter included with the G30) as per the instructions included with the G30 Brewing System.
2. Install the G30 Hop Plate by placing the plate feet down into the boiler over the top of the G30 filter, so the feet of the hop plate rest flat on the base of the boiler.
Features:
- Sleek, high-quality 304 grade stainless steel construction
- Easy to clean
- Full body false bottom style filter for even better hop filtration
- Designed specifically for use with the G30 Brewing System
Specifiations:
- 304 stainless steel construction: (0.9 mm Thickness)
- Outer diameter (width): 29.5 cm
- Height: 5.1 cm
- Perforation diameter: 1.8 mm
- Carton dimensions: 32 cm x 32 cm x 0.9 cm"
Note: Some users may experience a slight reduction in boil vigour and a slight increase in heating time.
Caution: Post-boil hop matter will retain heat. Always use thermally insulated gloves when removing the hop plate post boil.
Upgrade your G30 and enhance your brewing experience with these rolled plates. Replace the standard G30 plates that come with silicone seals and make assembling and cleaning your grain basket a whole lot easier.
- 304 grade stainless steel
- Rolled edges
- Outer diameter (width): 267mm
A replacement tempered glass lid for the Grainfather G30.
Replacement rolled edge grain plate with handle for the Grainfather G30v3. This plate is to be used with the perforated grain basket and can be used as a top and bottom plate. Not recommended for use with G30 baskets pre G30v3.
Grainfather G30V3 with Counterflow Chiller + Free Grainfather Mill & Mounting Board (RRP: $469.00)
$1,060.00
Unit price perGrainfather G30V3 with Counterflow Chiller + Free Grainfather Mill & Mounting Board (RRP: $469.00)
$1,060.00
Unit price per
The G30v3 is an all-grain brewing system with a 30L (8 US Gal) capacity, designed to make up to 40 pints (23L or 6 US Gal) of high-quality beer from one brew. With app integration, innovative features, and an intuitive design, it’s perfect for both beginner and experienced brewers.
FEATURES
- Sleek 304 grade stainless steel body
- Manage your brew day from your mobile device via Bluetooth using the Grainfather App
- Get a more reliable connection between your G30v3 controller and the Grainfather App on your smartphone with the GCAST Bluetooth Wi-Fi Bridge
- A robust magnetic drive pump for maximum brewing efficiencies
- NEW perforated grain basket negates the need for a top plate or additional pipework
- NEW auto reset switch avoids the need to get underneath the unit should an unexpected trip occur
- Unlock distilling capabilities with the Still Spirits Alembic Dome & Condenser
- Available in both 220V and 110V in the US
- Backed by a 3-year warranty
Compatible with:
- GF30 Conical Fermenter
- GSERIES Glycol Chillers
- GCAST Wireless Bridging Device
- SF50 Conical Fermenter
- GCA Glycol Chiller Adapter
- Alembic Dome
- Counterflow Chiller (Highly recommended) The counterflow chiller is the simplest, most effective, and sanitary way to cool and transfer wort from your G30v3 to your fermenter in one step. If you have this, please see the instructions on the Counterflow Chiller box or refer to the G30v3 full instructions.
Whats included:
- Grainfather G30v3
- Bluetooth controller
- NEW perforated grain basket
- Grain plate
- Lifting bar
- Glass lid
- Recirculation pipe
- Filter
- Hose fittings
- Built-in pump
Specifications:
SIZE:
- 685 x 386mm (27 x 15’’)
WEIGHT:
- 14.6kg (32lb)
MAX PREBOIL VOLUME:
- 30L (8 US Gal)
BATCH VOLUME:
- Max: 25L (7 US Gal)
- Min: 10L (3 US Gal)
GRAIN BILL:
- Max: 8kg (18lb)*
- Min: 1.5kg (3.3lb)
*9kg (20lb) with top plate
POWER:
- NZ, AU, EU, UK, US: 2000W, 220V
- Also in the US: 1600W, 110V
CONNECTIVITY:
- Bluetooth Control
This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost.
The Grainfather G40 is a brewhouse brewing system that handles the hot side of the all-grain brewing process. This unit has the ability to produce up to 40L (11 US Gal) of wort from one brew. Connect your mobile device to the smart controller with built-in wireless control via the Grainfather App, for step-by-step brewing and access to 1000s of recipes.
The G40 is capable of transforming into a home distillery with the G40 and G70 Distilling Lid & Attachment Kits.
Add the Grainfather G40, G70 & SS Fermenter 1/2" Tap or Ball Valve Assembly 316 Stainless Steel - 1/2 Inch to enable quick drainage from the bottom of the unit making CIP a breeze.
Click here for the G40 instruction booklet.
Click here for the G40 technical specifications.
A replacement grain plate for the Grainfather G40 mash basket. Can also be placed on top of the grain in the mash basket (top plate) during mash recirculation and sparging. Also compatible with G70 v2.
For use with the G70 and G40 to allow quick drainage from the bottom of the unit. Made with high temperature resistant 304 grade stainless steel, the faucet’s operating temperature ranges from -10°C to 150°C.
Alternatively you could use the Ball Valve Assembly 316 Stainless Steel - 1/2 Inch.
Transform the G40 or G70 Brewing System into a home distillery with the G40 & G70 Distilling Lid. This lid features an industry standard 4” tri-clamp opening to allow for the connection of the Still Spirits T500 Reflux and Alembic Condensers, as well as third-party distilling equipment. Note: We will be launching Accessory Attachment Kits for the T500 Reflux and Alembic Condensers in the first quarter of 2023.
Features:
-
304 Grade Stainless Steel Construction
-
Standard 4” tri-clamp opening (industry standard)
-
Pressure relief valve
-
Barrel clamp locking mechanism
