Replacement Low2 keg lid o-ring seal for corny keg lids. Suitable for any 19L, 9.5L corny keg - ball lock or pin lock.

Also suits FermZilla 2" tri-clamp pressure lids.

Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.

From: Kegland

Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.

Now available in three pressure ratings:

Yellow - 17 PSI
Red - 35 PSI
Green - 65 PSI
Grey - 100 PSI

From: Kegland

Clear lubrication gel for keg parts such as o-rings, couplers, party pumps. Use with plastic and rubber components to avoid cracks and extend their life. Just a little of this goes a long way.

Food grade keg lube is completely safe to use with all components. FDA listed, high quality, tasteless and odourless grease.

• Food safe lube for keg parts

• Use with both rubber and plastic parts to avoid easy damage

• Long lasting

• Keeps for years

Specifications

• Food Grade lubricant is safe for all home brewery needs

• Keeps rubber parts soft and supple

• Helps prevent leaks

Size: 1oz (28g)

Made in: Germany

Service temperature: -20C to +45C

From: Krome Dispense

Colour coded Yellow and Red Ball Lock Keg Post O-Rings. Silicone for superb malleability and spring back memory performance.

We've all been there, not looking or not thinking and trying to put a gas disconnect on a liquid post. Yes, there's a notch in it. Yes, there are words IN and OUT. But you're busy! You don't have time to go searching, it should just be in your face obvious that it's a liquid or a gas post. KegLand finally has the answer with the long awaited colour coded Gas and Liquid Post Sets Red & Yellow.

FAQ
Why not Low2 O-Rings? Aren't they supposed to be better?

There is one fundamental reason why we didn't and shouldn't use Low2 O-rings for a post. Spring-Back Memory - Leak prevention.

Low2 has a lot of memory, while silicone does not. This means that if you use a Low2 O-ring on your keg posts, keep the keg cold in the fridge, and have everything connected, then later remove and reattach the disconnects, the O-ring's memory could be slightly off unless you reseat it in exactly the same position. That misalignment can lead to a potential leak.

We use Low2 on the Hatch Lid O-Ring because its a face seal that can withstand 100's of PSI worth of pressure, and even if flattened slightly under pressure it can be reseated quite easily.

A Radial Seal (Post O-Ring) is much harder to manipulate. 

All independent testing with Low2 Keg Lid O-rings was done with silicone post o-rings. So rest assured you're getting the best possible product that means less leak spots, and better chemical resistance and performance.

Comes with:
5 x Yellow Liquid In Post O-Rings
5 x Red Gas Out Post O-Rings

We would recommend applying food grade lubricant to your o-rings on a regular basis to prolong their life. Especially after deep cleaning.

From: Kegland

Kegging your beer and keeping it cold will help to keep your beer at its best for as long as possible, and there is nothing quite like pouring a nice cold beer at the end of a long day.

This starter kit provides you with the basic items you need to begin kegging your beer. You will also need a fridge or freezer (temperature controlled) to keep your keg of beer cold and a co2 cylinder to carbonate and serve.

To get a good pour when serving simply adjust Ball Lock Beer Duotight Disconnect - Flow Control.

Use 0.5m to connect the MK5 CO2 Regulator to the Ball Lock Gas Duotight Disconnect and 1.5m to connect the Ball Lock Beer Duotight Disconnect - Flow Control to the Duotight - 6.5mm x 8mm Reducer and Beer Tap - Keg Picnic Tap - Duotight. 

This kit includes:

• Mangrove Jack's 19L Keg or Kegland Corny Style 19L Keg
  
• Ball Lock Beer Duotight Disconnect - Flow Control
• Ball Lock Gas Duotight Disconnect
• Regulator - MK5 CO2 - Tool-Free
• EVABarrier 4mm ID / 8mm - 2m
• Duotight - 6.5mm x 8mm Reducer
• Beer Tap - Keg Picnic Tap - Duotight

Use the dropdown boxes above if you would like to add any of the following items:

• Mangrove Jack's CO2 Cylinder (3.4L, 2kg capacity) (pick up only)
• CO2 Cylinder - Reconditioned & Certified Steel 7 lb (3.2kg) Cylinder (pick up only)
• Sodastream CO2 Adapter - Deluxe with Pin Adjustment
• Duotight 8mm Push Fit Check Valve (suitable for 5.5mm ID / 8mm OD line)

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost. 

The Kegmaster Premium XL 2 Tap Kegerator from Keg King is a premium kegerator full of features for a professional experience when serving beverages at home.

Get up to 2 kegs on tap and save space as well as cooling times! 

The Kegmaster Premium can store up to 4 x 19 L ‘Corny’ kegs giving you the option of conditioning 2 kegs while serving from 2. Alternatively, the Kegmaster Premium XL can fit 2 x 20 L PET Kegs + 1 x 19 L ‘Corny’ keg, 3 x 20 L SS Commercial Kegs, or 1 x 50 L SS Commercial Keg.

The internal volume has increased from previous versions to an impressive 160 L capacity while keeping the kegerator compact enough to fit in typical ‘kegerator-size’ spaces. 

The Kegmaster Premium XL also includes the UltraTap for laminar flow and the perfect pour! Also includes are built-in, low-profile rollers so you can easily move your kegerator in position and a gas cylinder bracket that can be installed at the back for efficient storage of your CO2 cylinder.

With a preassembled font and gas line, there is minimal assembly required, meaning you can get round to serving your beer or other carbonated beverage quickly and with ease. 

Features:

• Built in rollers for easy moving – removeable and upgradeable to castors.
• Reversible Door – orient to open how you like.
• Font Fan with speed control – keeps your font cold and runs more quietly.
• Internal light – handy for inspecting keg connections.
• Suitable for free standing installations – can also be installed under counters.
• R600a Refrigerant – environmentally 

The kegerator is easy to set up and you only need to add a C02 Cylinder, pop in some kegs and you're good to go.

What's Included

• Kegmaster Premium XL Kegerator
• Preassembled 2-tap font and gas line
• MKX Regulator

Specifications

Height: 850 mm with rollers 830 mm without rollers 890 mm with castors
Width: 610 mm
Depth: 660 mm
Internal Height: 724.9 mm
Internal Width: 511.9 mm
Internal Depth: 405.1 mm
Volume: 160 L
Weight: 43 Kg
Power: 220-240V 50Hz
Climate Class: T
Refrigerant: R600a (40g)
Insulation: Cyclopentane
Packaged dimensions: H 88 cm W 66 cm D 69 cm

This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost. 

The Kegmaster Premium XL 2 Tap Kegerator from Keg King is a premium kegerator full of features for a professional experience when serving beverages at home.

Get up to 2 kegs on tap and save space as well as cooling times! 

The Kegmaster Premium can store up to 4 x 19 L ‘Corny’ kegs giving you the option of conditioning 2 kegs while serving from 2. Alternatively, the Kegmaster Premium XL can fit 2 x 20 L PET Kegs + 1 x 19 L ‘Corny’ keg, 3 x 20 L SS Commercial Kegs, or 1 x 50 L SS Commercial Keg.

The internal volume has increased from previous versions to an impressive 160 L capacity while keeping the kegerator compact enough to fit in typical ‘kegerator-size’ spaces. 

The Kegmaster Premium XL also includes the UltraTap for laminar flow and the perfect pour! Also includes are built-in, low-profile rollers so you can easily move your kegerator in position and a gas cylinder bracket that can be installed at the back for efficient storage of your CO2 cylinder.

With a preassembled font and gas line, there is minimal assembly required, meaning you can get round to serving your beer or other carbonated beverage quickly and with ease. 

Features:

• Built in rollers for easy moving – removeable and upgradeable to castors.
• Reversible Door – orient to open how you like.
• Font Fan with speed control – keeps your font cold and runs more quietly.
• Internal light – handy for inspecting keg connections.
• Suitable for free standing installations – can also be installed under counters.
• R600a Refrigerant – environmentally 

The kegerator is easy to set up and you only need to add a C02 Cylinder, pop in some kegs and you're good to go.

What's Included

• Kegmaster Premium XL Kegerator
• 2 x 19 L ‘Corny’ Kegs
• Preassembled 2-tap font and gas line
• MKX Regulator

Specifications

Height: 850 mm with rollers 830 mm without rollers 890 mm with castors
Width: 610 mm
Depth: 660 mm
Internal Height: 724.9 mm
Internal Width: 511.9 mm
Internal Depth: 405.1 mm
Volume: 160 L
Weight: 43 Kg
Power: 220-240V 50Hz
Climate Class: T
Refrigerant: R600a (40g)
Insulation: Cyclopentane
Packaged dimensions: H 88 cm W 66 cm D 69 cm

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.

This Kegmenter is bundled with a stainless 4inch tri-clamp ball lock lid which will enable you to turn your kegmenter into a unitank fermenter, and pressurisable so it can also be used as a keg.

The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can either carbonate naturally with the use of our adjustable pressure relief valve (spunding valve) or if you are using a CO2 gas cylinder you can force carbonate.

Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.

The chimes on the Kegmenters have specifically been designed to be taller than normal chimes so they are high enough to give clearance over the stainless posts on the Ball Lock Post Lid. This means the Kegmenters can be stacked. The interlocking stacking chimes means the kegs can be safely stacked up to 4 high.

Pressure Limitations
Maximum Working Pressure: 2.5 BAR
Test Pressure: 5 BAR
Wall Thickness (Body/Chimes): 1.8mm/2.1mm
Diameter: approx. 39.5cm
Height: approx. 38cm

From: Kegland

This Forward Sealing Flow Control beer faucet features a forward-sealing design with the added benefit of having a lever to adjust beverage flow. In normal rear-sealing faucets, the entire faucet has to drain of beer. In forward-sealing flow control faucets the faucet keeps beer in it so the inside doesn’t have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavours transferring to your beer while you pour.

This Beer faucet uses a threaded spout, compatible with Nukatap fittings, that can quickly and easily be removed and replaced with a range of other spouts including:

• Growler Filler – features a 1/2″ barb for easy growler filling
• Stout Spout – features an internal creamer disc for the perfect pint
• Ball Lock Post – allows for easy fill of smaller kegs or connect a counter pressure filler or line cleaner.

The Flow Control model is perfect for users that often switch between beer styles with different carbonation levels, or want to conveniently switch from pouring pints to filling growlers without having to make adjustments to the regulator pressure settings.

• Made with 304 Grade stainless steel and comes with a lever to control the flow
  of your beer
• It has a modular, threaded spout that can fit a variety of different attachments
• The front sealing faucet eliminates the build-up of mold and bacteria.
• The threaded spout easily unscrews from the faucet
• Pour a pint and then fill a growler in no time at all
• Works great to bottle beer with a Ball lock adapter and a Beer Gun

Also available without Flow Control.

From: Krome Dispense

The forward sealing design shuts off the flow of beer at the front of the tap which will keep wild yeast and bacteria out of the interior of the tap body. This design will also keep your faucet moist. Since it is not drying out you will not get a sticky tap so the opening will always be easy.

This Beer faucet uses a threaded spout, compatible with Nukatap fittings, that can quickly and easily be removed and replaced with a range of other spouts including:

• Growler Filler – features a 1/2″ barb for easy growler filling
• Stout Spout – features an internal creamer disc for the perfect pint
• Ball Lock Post – allows for easy fill of smaller kegs or connect a counter pressure filler or line cleaner.

Other tap designs require you to replace the tap on the font when changing from one beer style to the next. This tap allows you to simply unscrew the standard spout and attach a range of different spout options to suit your beer style.

Compatible with all our shanks and tap handles.

Material: polished stainless steel
Body thread: 1-1/8 X 18 UNEF
Lever thread: 3/8" X 16 UNC

Note: handle and shank not included.

Also available with flow control.

From: Krome Dispense

Lid pre-fit with grommet for Handcraft Supplies 10L Fermenter. Stackable and made from food-grade plastic.

Lid pre-fit with grommet for Handcraft Supplies 5L Fermenter. Stackable and made from food-grade plastic.

Lid for Handcraft Supplies 5L Fermenter. Stackable and made from food-grade plastic.

Food grade plastic lid pre-fit with grommet for Handcraft Supplies 30 L Fermenter.

The Liquid Ball Lock Post for Keg Coupler is a liquid ball lock post with a female 5/8 inch connection. It allows you to connect ball lock disconnects to a keg coupler making it extremely easy to swap over from a corney keg to a commercial keg (you will need the correct coupler for the keg as well). 

Low Volume CIP Spinning Spray Rotor (stainless swivel nut and barb).

Introducing the new Low Volume CIP Spray motor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day.

- Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units)

What can it do?
Clean In Place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to.

Specifications

1 x Custom molded rotating spray head with 1/2" BSP thread
1 x 300mm length silicon tubing suitable for your BrewZilla recirculation arm
1 x Stainless nut and barb

Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down.

From: Kegland

These seals replace the red o-ring seal inside the 20L Oxebar kegs.

Includes:
5 x Low2 Keg Lid Seals to suit the 20L Oxebar Keg (Yellow)

These seals replace the red o-ring seal inside the 20L Oxebar keg lids.

What is Low2?
Low2 O-Rings are the new golden yellow standard of homebrew kegs brought to you by KegLand Australia. Why? Because of their unique composition (Synthetic M-Class and Cross-Linked Elastomers), they have superior oxygen barrier properties than that of the previus O-Rings (Silicone). This results in your beverage staying fresher for longer.

The same material O-Ring (Low2) were independently tested on the 19L stainless steel kegs by GunnLab. 

From: Kegland

This Pressure Filler Cap makes transferring beer to a bottle easy! If you keg your beer and want to take a few bottles for you to drink or your friends to try, this is the perfect piece of equipment for you. It can also be used to 
carbonate your beer or water or used to clean your beer lines. 

This fits both the black/liquid and grey/gas ball lock disconnects and has a barb tail that fits 6mm tubing if you wish to use this when filling bottles. 

With the portable dispensing kit, you will now be able to dispense straight from the keg (think party kegs!) which means you will be able to take your homemade beer to parties, BBQs and other gatherings where you can share your brews with others.

The kit has an inlet for standard threaded disposable 16g CO2 canisters plus adaptors for paintball cylinders, 74g CO2 cartridges and SodaStream cylinders!

Kit Contains:

• Portable Keg Dispensing Kit 
• Threaded Gas Ball Lock Disconnect 
• Threaded Liquid Ball Lock Disconnect 
• Mini Keg Ball Lock Cap 
• Mini Keg Diptube Hosing 10 L 
• Mini Keg 10 L 

With the portable dispensing kit, you will now be able to dispense straight from the keg (think party kegs!) which means you will be able to take your homemade beer to parties, BBQs and other gatherings where you can share your brews with others.

The kit has an inlet for standard threaded disposable 16g CO2 canisters plus adaptors for paintball cylinders, 74g CO2 cartridges and SodaStream cylinders!

Kit Contains:

• Portable Keg Dispensing Kit 
• Threaded Gas Ball Lock Disconnect 
• Threaded Liquid Ball Lock Disconnect 
• Mini Keg Ball Lock Cap 
• Mini Keg Diptube Hosing 3 L 
• Mini Keg 3 L 

With the portable dispensing kit, you will now be able to dispense straight from the keg (think party kegs!) which means you will be able to take your homemade beer to parties, BBQs and other gatherings where you can share your brews with others.

The kit has an inlet for standard threaded disposable 16g CO2 canisters plus adaptors for paintball cylinders, 74g CO2 cartridges and SodaStream cylinders!

Kit Contains:

• Portable Keg Dispensing Kit 
• Threaded Gas Ball Lock Disconnect 
• Threaded Liquid Ball Lock Disconnect 
• Mini Keg Ball Lock Cap 
• Mini Keg Diptube Hosing 5 L 
• Mini Keg 5 L 

This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits.

Heat Pad SpeCraft Series:

• Provides low, constant heat where it is needed for fermentation.
• Aids yeast activity and helps avoid stuck fermentation.
• Inexpensive to run.
• Voltage: 220-240V
• Power: 25W
• Colour: White

The Mangrove Jack’s Hop Spider keeps hops together during the boil. It can be used on all appropriate sized boil pots, including the Grainfather.

Made with a coarser, 800 micron mesh, for maximum wort flow and increased hop utilisation. 

Specs
Diameter: 15 cm 
Length: 30 cm 
Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook.

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

The 10L can be used as a growler without the ball lock cap - perfect for filling up at your favourite tap room or brewery!

• Portable size
• Pressure carbonate (using the ball lock cap)
• Stainless steel body
• Handles for easy transportation

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

The 3L can be used as a growler without the ball lock cap - perfect for filling up at your favourite tap room or brewery!

• Portable size
• Pressure carbonate (using the ball lock cap)
• Stainless steel body
• Handles for easy transportation

No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

The 5L can be used as a growler without the ball lock cap - perfect for filling up at your favourite tap room or brewery!

• Portable size
• Pressure carbonate (using the ball lock cap)
• Stainless steel body
• Handles for easy transportation

Carbonate and serve from your Mangrove Jack's Mini Keg with the Ball Lock Cap. Suitable for the 3L and 5L Mini Keg.

Carbonate and serve from your Mangrove Jack's Mini Keg with the Ball Lock Cap. Suitable for the 10L Mini Keg.

With the portable dispensing kit, you will now be able to dispense straight from the keg (think party kegs!) which means you will be able to take your homemade beer to parties, BBQs and other gatherings where you can share your brews with others. 

The kit has an inlet for standard threaded disposable 16g CO2 canisters plus adaptors for paintball cylinders, 74g CO2 cartridges and SodaStream cylinders! 

Kit Contains:

• Portable CO2 Kit 
• Ultratap 
• Beer Faucet Adapter 
• Threaded Gas Ball Lock Disconnect 
• Threaded Liquid Ball Lock Disconnect 

Ball lock cap for use with the Mangrove Jack's 3 L, 5 L, and 10 L Mini Kegs. This cap includes a liquid and gas post, plus pressure relief valve, allowing for carbonation and serving from a portable CO2 kit, or kegerator.

Diptube hosing (55cm) for use with 10 L Mangrove Jack's Mini Kegs.