Sort by:
This is a replacement seal (2 inch beaded tri clamp seal) for the Conical Fermenter cone plug.
The Grainfather GF30 Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates when using either using the Grainfather GC4/GC2 Glycol Chiller or Cooling Pump Kit to lower the fermenter’s temperature.
Features:
- Made from high quality 5mm thick SBR foam.
- Consists of two independent sections for both the main body and the fermenter cone for total coverage.
The new Grainfather Conical Fermenter Wireless Temperature Controller is wifi-enabled, and is designed for use with the Grainfather Conical Fermenter PRO. This all-new wireless controller is an upgrade from the original Conical Fermenter Temperature Controller, and can be easily installed on the Conical Fermenter using the directions provided.
Control the heating and cooling (when used with The Grainfather Gylcol Chiller or Cooling Pump Kit) remotely with the Conical Fermenter Wireless Temperature Controller. Simply connect the controller to the Grainfather App and control and track the fermentation temperature when you're out and about.
This new wireless controller attaches directly to the fermenter, alleviating any concern of the controller falling off the mounting bracket.
With a new and improved digital display and the flexibility the new controller offers, you are definitely going to want to upgrade.
Easily attach to the Grainfather Conical Fermenter, for a clean and simple way to transfer your beer without the need to lift the fermenter to perform a gravity fed transfer. This also ensures less chance of oxygen entering the beer during transfer.
All you need is a C02 bottle and a regulator to attach to the Pressure Transfer and you can transfer your beer into a keg or bottles through the Conical Fermenter Dual Valve Tap or via the top of the fermenter lid using the Beer Racking Pipe.
NOTE: Batteries are not included for the Pressure Gauge. 2 x AAA batteries are needed.
Specifications
High quality 304 stainless steel components
Accurate digital pressure gauge
Needle valve for precise control of pressure
Replacement high-temperature food-grade silicone hose for use with the Grainfather GF30 Conical Fermenter Pressure Transfer.
This tube can connect to the sample valve of the dual valve tap or the pressure transfer dip tube for transferring liquid out of the fermenter.
Length: 2m
The GCA Kit makes accurate temperature control more accessible for brewers. Whether you have a plastic or stainless steel fermenter, bucket or barrel, or even a conical, this kit has everything that you need to connect your fermenter to the Grainfather Glycol Chiller (sold separately).
It comes with a Glycol Chiller Adapter (GCA), heating pad, cooling coil, rubber bung, 4 x rubber bung stoppers, 2 x hose clamps and 2 x cooling connection hoses. The GCA also has wireless capabilities, making it compatible with the FREE Grainfather App, so you can control your fermentation temperature from anywhere.
Simply assemble the cooling coil and bung, and place this inside your fermenter. Attach the hoses to the cooling coil using the hose clamps and then also connect the other end of the hoses to the Glycol Chiller. Attach the heating pad and the temperature probe to the fermenter and then connect both cables to the GCA. Plug the power cord into the GCA, then connect the other end of the cord to the Glycol Chiller. Once set up and connected, the cooling coil and heating pad will regulate cooling and heating as required.
Now everyone can benefit from accurate temperature control and create even better beers!
View the Glycol Chiller Adapter Kit instructions online
The Grain Mill Bamboo Mounting Board works great with the Electric Grain Mill. Mount the mill onto the board and place it over a bucket to catch your freshly crushed grain.
Perfect for small batch brewing, where you can test different beer styles or recipes and have more varieties of beer on the go.
The Micro Pipework is perfect for brewing 10 L beers, or standard batches of a lower ABV beer with a small grain bill. Use this pipework when you are brewing with 2 kg - 4 kg of grain.
The SF50 has a 50L capacity that is designed to hold batches of up to 45L. It can be adapted to suit your brewing space with an adjustable leg height and castor wheels for easy manoeuvrability. Its intuitive design, 304-grade stainless steel build, and 113° angle conical makes both fermentation and cleaning easy. A perfect brewing companion for smaller brewing systems like the S40, G30 or G40.
Product Features:
- Sleek high quality 304 grade stainless steel body
- 113° angle conical avoids yeast and sediment getting stuck to the sides of the cone.
- Adjustable leg height and castor wheels for easy manoeuvrability.
- Easily dump yeast with a separate valve.
- Insert temperature probes into the built-in thermowell for accurate temperature readings.
- Transfer and take samples above the yeast and trub line with an accessible valve on the side of the unit.
- Compatible with the GC4 for accurate temperature control.
- Comes with a 2-year warranty.
What's Included:
- Grainfather SF50 Conical Fermenter
- Stainless steel lid with 38mm tri-clamp fitting
- Rubber bung & airlock
- Thermowell (use with GCA or thermometer)
- Cone mounted 10mm stainless steel barbed sample valve
- 19mm bottom mounted stainless steel dump valve
- Adjustable and removable legs with castor wheels
SPECIFICATIONS
SIZE: 866 x 394 (h x d)
WEIGHT: 10kg
CAPACITY: 50L
POWER: None
CONNECTIVITY: None
Click here for the SF70 technical specifications.
The Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18 L of water making the brewing process even easier by having the right amount of sparge water heated to the right temperature ready at the time of sparge.
Start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off. Also comes with a sight glass, tap and heating lights.
NOTE: Graduations on the scale are measured from the tap.
SPECIFICATIONS
18 L Capacity
Stainless Steel Body
2 kw Element
Sight Glass (with 1 L graduations visible)
Tap
Temperature Control
Heating Lights (to indicate input temperature has been reached or is still being heated)
DIMENSIONS
Height to top of lid: 540mm
Body diameter: 275mm
Handle to handle: 350mm
Dispensing tap: 75mm
The 25L Sparge Water Heater is designed to be used with brewing systems of up to 40L, making it the perfect companion for the G40 or the G30. This temperature-controlled urn allows you to heat up to 25L of water in preparation to sparge, reducing the time and effort of heating additional sparge water during your brew, making your brew days even easier.
Specifications
- 304 grade stainless steel with a brushed finish.
- 25L capacity
- 2250W
- Heats up to 25L (6.6 US Gal) of sparge water in approx. 50 minutes.
- One piece structure for easy cleaning.
- Cool touch lid, with a twisted lock for safety purposes.
- Water gauge indication with an easy to use ball valve tap for dispensing water.
- 45-110°C variable thermostat to heat your water to the desired temperature.
- Heating lights to indicate when the temperature has been reached or still heating.
- Concealed heating element.
With the Grainfather Sparge Water Heater 40L, you can heat and keep up to 40L of sparge water at a specified temperature until it's needed. This means you can focus on the rest of your brew day, without having to worry about how or when you're going to heat a large volume of sparge water, and avoid the need to use 2 (or more) smaller volume heaters.
The unit heats up to 40L (10.6 US Gal) of sparge water in approx. 50 minutes, so you can simply start heating during the mash, and can forget about it until it's time to sparge.
Full Product Specs:
- Easy to read water level markings.
- Thermostat to heat water to your desired temperature, as well as boil.
- Easy to use ball valve tap for dispensing water.
- Heats up to 40 L (10.6 US Gal) of sparge water in approx. 50 minutes.
- 304 grade stainless steel.
A great solution for taking 2 L of beer from your keg to wherever you need to go, be it inside or to the party or simply to the other side of the room!
Made from high grade stainless steel, and insulated to keep your beer chilled.
Specifications
304 grade stainless steel
Double walled with vacuum insulation
Flip top lid
2 L capacity
The Grainfather Thermowell consists of a tube closed at one end which can be fitted to a fermenter and allows for the Grainfather Fermentation Thermometer, or the GCA temperature probe to be inserted.
The Thermowell is fixed to the fermenter so that the closed tube is surrounded by the fermenter contents. The thermometer or temperature probe can then be inserted to can read the temperature accurately, without touching the liquid.
A 14mm hole in the fermenter is required for installation. The Thermowell is also a spare part for the SF70.
Includes:
- Thermowell
- Nut
- O-ring
Replacement pump silicone tubes with fixing rings.
Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process.
The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort.
Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller. Avoid long lag time and off flavours by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialling in the exact wort temperature your specific yeast requires. Requires a 8 mm inner diameter silicon hose.
Click here to download the Wortometer Instructions.
A 1 gallon (3.8 litres) wide-mouth glass jar with a plastic screw top lid. Ideal for steeping, macerating, or ageing spirit.
Could also be used as a small fermenter by making a small hole in the lid and adding a top hat grommet and airlock.
Dimensions
- Diameter: 155mm approx.
- Height: 260mm approx.
- Mouth Diameter: 100mm approx.
A solid plastic fermenting barrel with screw top lid, airlock hole, and one litre markers down the side.
Please note that you will also need to order an airlock, airlock grommet and tap if you want a complete fermenting barrel.
Dimensions: approx. 525mm high x 300mm diameter
Handcraft Supplies 5L Fermenter is perfect for brewing up to 4.5 litre batches of wine, beer, cider, or other fermentation.
Stackable and made from food-grade plastic with litre markings on the side so you can easily see how much to top up to. Comes with a sturdy plastic handle for easy transportation.
Note: Does not include lid.
Handcraft Supplies 5L Fermenter with Lid & Grommet is perfect for brewing up to 4.5 litre batches of wine, beer, cider, or other fermentation.
Comes with a lid pre-fit with a grommet, ready for an airlock. Stackable and made from food-grade plastic with litre markings on the side so you can easily see how much to top up to. Comes with a sturdy plastic handle for easy transportation.
A 60 litre plastic carboy/barrel fermenter suitable for fermenting beer, cider, wine, or spirits.
You may also require:
The Handcraft Supplies Fermentation Equipment Kit contains the essential equipment you require for your fermentation needs. Whether you're making beer, cider, wine, or a wash for distilling, this kit enables you to get your fermentation underway and completed successfully. All you need are your ingredients and a suitable cleaner and sanitiser.
Designed for 23 litre batches. Simply assemble, sanitise and add your ingredients.
This kit is made up of:
30L Fermenter + Lid
Stick-on Thermometer Strip
Bubbler Airlock
Grommet
Tap
Plastic Spoon
Hydrometer
Handcraft Supplies fermenter set containing a 30L bucket with lid and accessories, ready to ferment. Includes litre markers down the side. Use for primary or secondary fermenter, or even as a bottling bucket.
This kit is made up of:
Stick-on Thermometer Strip
Bubbler Airlock
Top Hat Grommet
Sediment Reducer
Tap
30L Fermenter + Lid
This handy spring clamp has been the tool of choice for many KegLand employees to hold the malt pipe silicone hose in place during the mash.
Handy Clamp (4" Long) - ideal for use with a Brewzilla.
This clamp features a heavy-duty muslin spring which ensures your silicone hose never accidentally pops out of your mash tun and spills your precious nectar over your brewery floor.
It features rounded handles for a comfortable grip and a PE end grip to ensure your hosing is kept secure.
This clamp is made from PP and PE which have good chemical resistance so it will stand up to the task for use around common brewing cleaners and sanitisers such as StellarClean/PBW and StellarSan.
These spring clamps have a multitude of potential uses throughout your brewing outside of securing silicone hosing.
From: Kegland
A brewing heater belt that fits around your fermenter to provide steady and constant warmth for your brew. The 30 watts will gently warm without creating a hot spot, and can be moved up or down the fermenter to increase or decrease the heat transfer to the brew.
To further control the temperature of your fermentation, combine with a RAPT Temperature Controller or similar to regulate the heater belt automatically.
Note: fermenter not included.
From: Kegland
These 304 Stainless 2200w weldless elements are designed to fit a 32mm hole inside the wall of your brewing vessel or boiler. It comes bundled with the power cord.
We do recommend using a RAPT Temperature Controller to run this element with the appropriate thermowell or temperature probe attachment.
These electric brewing elements are highly recommended for your HLT, or even for a HERMS or RIMS setup. Multiple elements may be required for larger volumes and depending on what temperature you are trying to achieve. If you are going to be using these elements directly in your mash tun, and will try to maintain temperature using the element, we would recommend getting a power control chip 3600w to modify the power output to the element. Too higher power directly in contact with your malted grain can cause scorching/off flavours as the temperature may not be evenly distributed and isolated purely around the element itself.
Element Length: approx. 300mm
Diameter: approx. 25mm
Thread: approx. 32mm
From: Kegland
3600 Watt Stainless Steel Heating Element with 2 inch tri-clamp (220-240v)
It can be fitted to a 2" tri-clamp ferrule. It does have a water-resistant screw element guard. This was produced to be used with the 118L Kegmenter that has 2" ferrules.
It is highly regarded as a popular and reliable element for distillers and homebrewers.
This element is to be installed by a professional electrician with a 15amp Cord.
From: Kegland
