Sort by:
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.
Fits 10mm outer diameter tube.
Note: colour may vary.
This Push-Fit Elbow will allow you to join beer or gas line sections on your kegging system.
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
Made of 304 stainless steel, this fitting is resistant to:
- high temperatures
- low temperatures,
- corrosion,
- moisture,
- abrasion
The fixed ring has good elasticity and is resistant to plugging and unplugging with a rubber ring seal to prevent leakage
Material: 304 stainless steel
Sealing ring: ternary fluorine rubber
Material: 304 stainless steel
Thread: 3/8 male thread
Use O/D pipe size: 8mm
Maximum pressure: 40 bar (580 PSI)
Working temperature: -20℃~200℃
This Push-Fit fitting will allow you to connect 10mm OD line to keg couplers or any 5/8" thread.
Note that this is for 10mm diameter line - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
This Push-Fit Joiner will allow you to join beer or gas line sections on your kegging system.
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.
Fits 10mm outer diameter tube.
Note: colour may vary.
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here.
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.
Fits 10mm outer diameter tube.
Note: colour may vary.
This Push-Fit Two-Way Divider will split the gas (or beer) line on your kegging system in two, allowing you to gas two kegs at the same time.
Note that this is 10mm diameter in and out.
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
The barb on this gauge will enable you to put this directly onto hosing or alternatively you can connect it to any of the push in fittings such as the Duotight push in fittings in the 8mm size.
Specifications:
- 0-40psi / 0-250kPa / 0-2.5 Bar (kg/cm^2)
- Rubber Coated
- 8mm Push in Barb
From: Kegland
Rakau 2024 Harvest
Batch: 24-245
Alpha: 10.26%
Beta: 4.17%
A true dual purpose hops with stone fruit and fig characters and excellent bittering qualities.
Breeding:
Rakau™ Brand 70-4-9 is a New Zealand triploid, purpose bred and selected for its unique dual purpose brewing qualities and characteristics. Re-released from the NZ Hop breeding programme in 2007 for trials under organics and now widely established under conventional cultivation.
Selection:
Rakau™ is a standout hop throughout the selection process due to its inherent intensity of aromas lifted from a heavy weight of oils. Selectors generally are agreed that the dominant fruitiness is that of fresh stone fruit such as apricot.
Brewing:
Great results over several brewhouse applications have been seen with sensory panels scoring uniformly high on the quality of bitterness as well as unique fruity flavours and aromas.
“The whole orchard!”
Applications:
New World styles of ales and lagers where brash fruity character and big but well constructed bitterness is desired. Readily toned back to lighter styles, even with multiple kettle additions.....and great when used in a combination of very late and dry hopping.
Rakau is used in Garage Projects Pernicious Weed in combination with Nelson Sauvin.
Rakau 2025 Harvest
Batch: 25-256
Alpha: 10.90%
Beta: 4.00%
A true dual purpose hops with stone fruit and fig characters and excellent bittering qualities.
Breeding:
Rakau™ Brand 70-4-9 is a New Zealand triploid, purpose bred and selected for its unique dual purpose brewing qualities and characteristics. Re-released from the NZ Hop breeding programme in 2007 for trials under organics and now widely established under conventional cultivation.
Selection:
Rakau™ is a standout hop throughout the selection process due to its inherent intensity of aromas lifted from a heavy weight of oils. Selectors generally are agreed that the dominant fruitiness is that of fresh stone fruit such as apricot.
Brewing:
Great results over several brewhouse applications have been seen with sensory panels scoring uniformly high on the quality of bitterness as well as unique fruity flavours and aromas.
“The whole orchard!”
Applications:
New World styles of ales and lagers where brash fruity character and big but well constructed bitterness is desired. Readily toned back to lighter styles, even with multiple kettle additions.....and great when used in a combination of very late and dry hopping.
Rakau is used in Garage Projects Pernicious Weed in combination with Nelson Sauvin.
RAPT - Bluetooth Thermometer -20 to 300C - 20cm HTC Probe
This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of these devices.
By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process. For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/
The new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal (https://app.rapt.io/). This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main units probe and this digital thermometer. This unit can also be setup to get push notifications to your mobile phone of when to sparge for example.
Along with this ease of access and control,the RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the probe is. Greater accuracy for a more repeatable recipe that results in much better beer!
Specifications:
- 20cm Probe Length with sharp tip~ Please remove the black plastic tip before use. That is for storage to avoid punctures / injury.
- 100cm Cable Length
- Magnetised Backing Plate (Orange)
- 2 x AAA Batteries (included)
From: Kegland
Yellow RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth).
The RAPT Pill allows true real-time specific gravity and temperature logging and control via wifi/bluetooth integration with the RAPT fermentation chamber, RAPT mobile app or RAPT IOT.
The RAPT Pill allows you to instantly read and log the specific gravity and temperature of your fermentation via the RAPT mobile app on your compatible Android smartphone or tablet, Apple iPhone/iPad or via the RAPT IOT hub on your Windows or Mac Computer.
The RAPT Pill has a long battery life and can last 2-5 months between charges when utilising Wifi. If only using Bluetooth the the battery can last 2+ years before needing to be recharged. The RAPT Pill has a USB-C charging port on the circuit board allowing fast charging from any USB-C cable. Alternatively you can purchase the Wireless Charging Kit so you charge your pill without needing to take it apart.
The RAPT Pill is universal and is compatible with most standard carboys, cornelius kegs, stainless steel fermenters and pressurisable fermenters.
Pill Housing Design
The RAPT Pill housing boasts many advantages compared to other wireless hydrometers such as:
- Made from strong BPA Free Tritan Plastic
- Greater ergonomics - The shape of the RAPT Pill has been designed for improved usability compared to other wireless hydrometers such that the Pill seperates into two pieces at the midline of the Pill rather than requiring a difficult to remove end cap to be unscrewed.
- Sanitary design - The RAPT Pill has no exposed thread and a double o-ring seal which allows for a water-tight seal with reduced risk of infection.
- Less susceptible to error - The larger housing of the RAPT Pill compared to other wireless hydrometers means that the gravity logging is less susceptible to error from krausen, hops or CO2 bubbles from fermentation.
Different housing colours are sold separately, allowing customisation of your RAPT Pill.
Specifications:
The RAPT Pill is approximately 37mm x 125mm - compact enough to fit almost anywhere!
What is RAPT?
The RAPT IOT Hub is a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involve different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notification in the off instance that something doesn't go to plan.
There is no limit to the number of RAPT devices you can connect the RAPT IOT Hub. This is in contrast to other popular wireless hydrometers where you are limited by the number of hydrometers you can connect to an app.
RAPT Pill - Blue Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
RAPT Pill - Clear Housing (Male Threaded - Bottom Piece).
Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.
RAPT Pill O-Ring sold separately.
From: Kegland
RAPT Pill - Green Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
RAPT Pill - Red Housing.
This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.
Does not include clear Pill Housing, the double o-rings, or the circuit board.
From: Kegland
A replacement silicone o-ring for the RAPT Pill.
It is always wise to have a few spares in case some get pinched when tightening up the RAPT Pill.
Sold individually.
From: Kegland
Charge your Pill wirelessly with this easy-to-install upgrade kit from Kegland. The RAPT Pill is a Wifi & Bluetooth hydrometer for logging fermentation to the cloud.
This easy to install kit allows you to wirelessly charge the Pill, and also access the Pill Captive Portal without needing to open the housing to access the USB-C port!
Includes:
1 x USB-C Wireless Charging Coil
2 x Adhesive Weight Pads
1 x USB-A to USB-C cord (AU power plug not supplied)
1 x Black RAPT Wireless Charging Dock (USB-C)
If the green light does not flash green (captive portal open), it means your battery is insufficiently charged. Leave your pill on the charging pad for 24 hours or until it is fully charged (red light turns off). Then lift the Pill on and off the charging pad and it will activate the captive portal (green light will start to flash).
Note: RAPT Pill sold separately, this is for the wireless charger only.
From: Kegland
This item is not held in stock and is ordered in on request. Please contact to check availability and shipping cost.
RAPT Temperature Controlled Fermentation Chamber
This fermentation chamber has been designed to heat and cool your entire fermenter. This is the ideal scenario as the whole fermentation vessel is placed in a temperature controlled environment which gives you the most even temperature and most precise control of your fermenter.
Many home made products can greatly be improved with perfect temperature control. The RAPT Temperature Controlled Fermentation Chamber gives you an electrically efficient means of setting, monitoring and controlling temperature which is perfect for Beer Making, Wine Making, Salami Making, leavening bread, fermenting yogurt, kombucha, germinating seeds, growing sprouts, kimchi, sauerkraut, olives, cheese, making spirit washes. Accurate temperature control is the key to getting reliable and repeatable results.
From -2°C up to 50°C all at the touch of your fingertips!
The control panel comes complete with an integrated colour TFT screen, the integrated secondary regulator that can be used to regulate gas into the chamber with our Inline Regulator with an integrated gauge or alternatively this can be switched over to the Gauge integrated BlowTie unit to regulate residual pressure in your fermenter. The 4 button colour display conveniently shows a log of historic temperature graphs, allows you to start, set/stop temperature profiles and gives you access to other critical information for that particular fermentation.
For more accurate readings of the core temperature of your fermenter. We highly recommend using a thermowell like our 60cm duotight thermowell with the 2m probe extension for the RAPT Fermentation Chamber.
Perfect as a Kegerator too!
This multi purpose chamber can also be used as a kegerator. In particularly cold climates where the ambient temp is below zero, this chamber can warm your kegs and prevent them from freezing. This chamber also has a higher keg storage capacity than a conventional kegerator that takes up the same footprint. This unit can hold 4 x 19L kegs on the floor and has enough headroom that you can also fit another layer of 9.5L half size kegs above this. To fit beer taps, you can drill your own holes through the door.
Convert to Display Chamber
This Chamber comes with brushed stainless steel PU foam-filled door. If you want to upgrade to a glass door the double glazed glass door can be purchased separately and switched over - coming soon.
What is RAPT?
RAPT is a dedicated Internet of Things (IOT) Hub for fermentation logging and control. It's a free service whereby any RAPT enabled product can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to control your devices remotely giving you absolute control of the device irrespective of where you are. The RAPT portal enables you to make complex temperature profiles that involved different temperature settings over time meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so you can receive email notifications in the off instance that something doesn't go to plan.
Specifications:
Integrated Heating: 50watt Heating Power
Cooling Capacity: 300watt Cooling Power
Max Power Consumption: 225 Watts
Refrigerant: r600a
Connectivity: Wifi (802.11) and Bluetooth
Temperature accuracy: +/- 0.1C
Temp Resolution: 0.1C
Integrated Screen: 2.8inch (diagonal) 320 x 240 Colour LCD TFT Active Matrix
External Dimensions:
Width: 540mm
Depth: 610mm
Height: 1760mm
Internal Dimensions:
Width: 440mm
Depth: 500mm
Height: 1300mm
To see the dimensioned drawings on this part click here.
Why buy an insulated fermentation chamber over a glycol chiller?
Typically in the past, some customers have needed to resort to glycol chillers to chill fermenters but this represents several issues:
- Glycol chillers often require a very cold liquid to enter into a fermenter causing an excessively cold part in the fermenter core.
- Glycol chillers consume significant amounts of power and in most instances more than double what this chamber would consume.
- Glycol chillers often result in spilling sticky glycol especially when hoses are connected and disconnected to the fermenter.
- Glycol chillers generally require penetrations through the walls/lid of the fermenter making the fermenter less sanitary and requiring more cleaning. "who needs that!"
- Often fermenters are not made with sufficient insulation. So when using a glycol chiller much of the chilling is lost which is not only power inefficient but the customer ends up with a large temperature gradient. This temperature gradient can result in convection currents in the fermenter that make it difficult for yeast and other solids to settle out of suspension. So clarification of the beer takes significantly longer.
- Many glycol chillers and fermenter combinations do not have sufficient power or are not well enough insulated to cool to sub-zero temperatures. So crash chilling is not possible. This is a significant compromise to a temperature-controlled solution and also results in less ability to clarify the finished beer.
For these reasons KegLand has developed the worlds first dedicated RAPT enabled fermentation chamber that can cool down to -2C and heat up to 50C even in hot and cold weather.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/
"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device. It also gives you the added functionality of push notifications to your mobile device."
From: Kegland
This RAPT wifi connected temperature controller box will enable you to monitor, track and control heating and cooling devices remotely through the internet. Set complex temperature profiles so the temperature will automatically change over time.
It connects with the RAPT web portal meaning that you can monitor, log and control the devices plugged into this temperature controller box remotely.
The colour screen clearly displays temperature, graphs of future and past temperature settings, and makes it much easier to perform profile temperature steps.
This plug and play temperature controller box has two clearly marked blue and red power sockets for heating and cooling so you can control a fridge or heating device at the same time to completely monitor and control the temperature. Each power outlet is rated to 10amp (2400 Watt max).
PID Included
This temp controller box comes with PID heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation.
Temperature Range
The temperature range of this device will enable you to control devices from -20C and up to 120C.
Various Mounting Options
This innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brewery. Simply unscrew the mounting plate and switch the mounting to your preferred orientation.
RAPT Wifi Compatible
This product will connect with the https://app.rapt.io/ portal. This portal will enable you to monitor, control and log past temperature and also show a future projection of temperature profiles that you might have running.
The Google Play Android App can be downloaded via the link below.
https://play.google.com/store/
The Apple App Store RAPT App can be downloaded via the link below.
https://apps.apple.com/th/app/
"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device. It also gives you the added functionality of push notifications to your mobile device."
From: Kegland
Note: design may vary slightly from photo shown.
Dimensions: approx. 30cm x 15cm
Note: design may vary slightly from photo shown.
Dimensions: approx. 30cm x 18cm
In Line Regulator with 8mm push fit connections.
This unit has no gauge. Looking for the Duotight Inline Regulator with Gauge?
This inline regulator is suitable for gas or liquid. The design has two main features:
1. Push In 8mm
It comes with 8mm push fit connectors so you can push your beer, water, gas line directly into the unit. No need for hose clamps, just push your EVABarrier line directly into the connector and it's securely joined.
2. Handy Tee Bar Adjustment
These have been designed with a highly visible yellow tee bar adjustment knob. Significantly easier than the previous designs that required a phillips head screw driver to adjust the pressure.
Constructed with Non-Corrosive Acetyl, Nitrile & Stainless Components. The Regulator body has two wall mounting points.
These regulators work great for reducing your mains pressure from 0-159psi. The maximum inlet pressure is 150psi.
From: Kegland
The Mangrove Jack's CO2 Regulator is a quality regulator that provides reliable gas control.
Can be attached to any co2 cylinder with type 30 / W21.8 thread.
KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible
The All-New Mini 360 Core Actuator Regulator is the most versatile mini regulator on the market. It is an extremely versatile mini regulator that can be used with either a Sodastream Canister, or the smaller disposable CO2 16g bulbs.
Unlike other regulator designs this new design requires no sodastream adaptor and you do not have the issues of trying to screw the bulb or sodastream cylinder into the regulator while gas leaks everywhere. This robust, convenient and superior design is just what you need for any portable keg system.
Please note this is not compatible with the 2kg, 3.5kg or 5.0kg CO2 Cylinders.
Features:
- Core Puncturing / Actuator - Zero gas lost to screwing in bulbs or Sodastream style cylinders.
- Interchangeable ball lock disconnect orientations (e.g. 45° Premium Ball lock to 90° Stainless Disconnects)
- 6.5mm duotight compatible hose barb (6.5mm x 8mm duotight) can also suit hose and stepless clamps (e.g. 4mm ID, 5mm ID or 6mm ID hose)
- Heavily Protected Mini Guage Dial. (Also interchangeable to different ranges)
- Common Pressure relief valve compatible. (65psi Green PRV as standard, compatible with 35psi Red and 100psi Grey)
Includes:
1 x Mini 360 Core Actuator Regulator
1 x 360° 6.5mm duotight compatible hose barb
1 x 360° FFL Fitting for MFL Disconnects
1 x Port end cap
1 x 65psi Green PRV
1 x Sodastream to 16g thread bushing
Upgrade to digital:
Upgrade to a more accurate digital gauge with this gauge. This mini gauge is easier to read and has a backlight so you can also read the pressure easily in the dark.
WARNING:
Do not over tighten onto your cylinder. It is recommended that you use a spanner to hold the neck of your Sodastream cylinder while attaching and detaching the Mini 360 Core Actuator Regulator.
From: Kegland
A seal kit for the Mini 360 Core Actuator Regulator. Contains the o-rings for the piston, the red inlet washer, MK4 seat assembly o-ring, 2 x barbMFL outlet o-rings and x thumb screw o-rings.
For instructions on replacing the seals and/or general maintenance please refer to the product manual here.
From: Kegland
The MK4 regulator provides reliable gas control. It has a large body for high flow rates and comes with a precision diaphragm for accurate adjustment, and also has a large adjustment knob for easy adjustment.
The regulator has also been designed so that the whole seat and seat cap assembly are manufactured as a fully encapsulated part. This adds to the reliability and in the case that the regulator is eventually opened up for servicing it reduces the chance of this assembly becoming contaminated by the service agent. This further improves reliability.
New and improved features in the MK4 version:
- Stronger Steel Gauges made from thicker steel
- Triple scale gauges in kPa, Bar and PSI
- New Colour Coded PRV valves allowing different levels of pressure safety. Also being colour coded it's easy to identify which PRV is fitted.
- New M6 Mounting Holes for easy Mounting
- 0-50 PSI recommended working pressure (higher pressure gauges and PRV can be fitted to make this model go up to 100 PSI)
- Comes with Duotight 8mm - MFL Connector (we recommend using thread tape to ensure a complete seal)
NOTE: This regulator is sold with the Green (65psi) pressure relief valve. Lower (35psi) and higher (100psi ) pressure relief valves are available (sold separately).
Apart from CO2, it is also suitable for Oxygen, Argon, Helium, and Nitrogen by changing the cylinder connection.
Output Pressure Gauge: 0-100 PSI
Tank Pressure Gauge: 0-3000 PSI
Outlet: MFL with Barbed Swivel Nut
Effective Working Pressure: 0-50 PSI
From: Kegland
The Type 50 for Nitrogen - MK4 Dual Gauge gas regulator is the only regulator you'll ever need to buy for a deluxe nitrogen stout/cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both PSI and KPA.
The most common problem with other regulators sold on the market was that contamination would occur through the seat and cap assembly within the regulator. This has now been solved with a second sintered filter on the underside of the seat assembly, within the regulator, to block contaminants.
New and Improved Features:
- Stronger Steel Gauges made from thicker steel
- Triple scale gauges in kPa, Bar and PSI
- New Colour Coded PRV valves.
- New M6 Mounting Holes for easy Mounting
From: Kegland
Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)
The MK5 Dual Gauge Regulator by KegLand now comes in a tool-free design with a heap of new features.
Latest Features
1. One handed tightening to the Cylinder. No spanner / wrench is required to attach the Regulator to your CO2 Cylinder. You can easily attach it with the nut-hand-wheel with one hand. This is due to a new spigot seal design that easily compresses without risk of damaging the seal or leaking.
2. Self servicing maintenance without the need for a vice or specialised equipment. Now with the regulators internals being shrunk down and accessible from the back plate. You can now easily undo the area with the regulator knob that has an M8 Hex / Allen key head and clean out your regulator if you have a contaminant in there.
3. Output with Check Valve, Ball Valve & Integrated 8mm duotight push in.
4. Triple scale Class 2.5 Gauges in kPa, Bar and PSI (+-2.5% Accuracy).
5. Brand new seat cap assembly design. The new seat cap is made of ultra high molecular polyethylene. That basically means from hardcore use and abuse that us homebrewers give regulators like force carbonating. The seat cap that is bouncing up and down is less likely to scratch and create brass finings that could otherwise cause pressure creep down the line from an internal contaminant going upstream.
6. Stronger Steel Gauges made from thicker steel.
7. Colour Coded PRV valves. This unit comes with a 65psi Green PRV. It does not come with a Red 35psi or Grey 100psi PRV
8. M6 Mounting Holes for easy Mounting. Please note, you will need to remove the nut-wheel as it will foul when mounting flat.
From: Kegland
A Type 10 fitting with 1/4" thread nut and stem for the MK4 Regulator.
This nut and stem suits Oxygen, Argon, and Helium tanks. The MK4 Regulators comes standard with a Type 30 thread which is suitable only for CO2 cylinders. Remove the existing Type 30 Nut and Stem and replace with the Type 10 to fit to Oxygen, Argon or Helium cylinders. We recommend using a ratchet gun or socket set to do this.
Note: Regulator not included.
A nylon regulator washer to fit the range of MK regulators (MKI, MKII, MKIII & MK4). Plumbers tape not required. Simply screw your regulator in tightly, the washer will make a complete seal.
From: Kegland
Replacement camlock seals.
Material: Silicone
Supplier: Kegland
A replacement seal for Kegland D-Type keg spears.
From: Kegland
