Sort by:
Stainless Steel gas disconnect with MFL fitting for ball lock corny kegs.
Made from 304 grade stainless steel, these keg connectors are extremely reliable and robust.
From: Kegland
A Ball Lock Gas Post for corny kegs.
Note: Poppet not included but can be purchased separately..
Ball Lock Keg Liquid Jumper Post - Double Ended Corny Post
We've seen some nifty tricks of how people wash their Kegerator lines if they have multiple taps. This compact solution is going to make that routine cleaning day a breeze without having to swap disconnects to the cleaning keg/bottle or dismantling multiple ball locks. Just jump on the jumper post.
This double ended cornelius post does not have a spring / poppet. It just has a piece of bar that activates the ball lock disconnect wide open.
This double ended post will only work with liquid Ball Lock posts.
Please note it is a single piece that cannot be undone from the middle.
From: Kegland
A Ball Lock Liquid Post for corny kegs.
Note: Poppet not included but can be purchased separately..
The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items.
Both Gas and Liquid posts available.
From: Kegland
A 2-piece ball valve made from 316 stainless steel
Features
- BSP threaded ends - female
- Maximum pressure 1000PSI / 69Bar W.O.G. (Water, Oil, Gas)
- PTFE seal maximum temperature 200°C
- Full port
- Lockable latch handle
A 1/2 inch ball valve assembly with a maximum operating temperature of 200℃ consisting of:
- 316 Stainless Steel 1/2 inch hex nipple
- 316 Stainless Steel 1/2 inch 2pc ball valve
- 316 Stainless Steel 1/2 inch male hosetail
Perfectly suited for use with the G70 and G40 to allow quick drainage from the bottom of the unit.
We recommend using thread tape to ensure a complete and leak proof seal.
A 316 stainless steel mini ball valve (female - female) with 1/2 inch BSP thread.
Features
- BSP threaded ends
- Reduced port
- Maximum pressure 900PSI / 63Bar
- EPDM seal maximum temperature 120°C
B - 46mm
C - 29.5mm
D - 22mm
A Barbed Swivel Nut, often used for MFL fittings.
Bore sizes usually available:
- 4.76mm (3/16")
- 6.35mm (1/4")
It can be used for both gas and liquid. You should also purchase a stainless Oetiker Clamp or Worm Clamp to secure the connected lines.
This is quality beer/gas line for your kegging system.
The amount of beer line required to achieve a balanced system and avoid a glass full of foam depends on a number of different variables. Here is a link to a calculator that will help you determine the amount of line required to help you pour foam free beer.
Price is per metre - order as many metres as required
Dimensions/Options:
- 5.5mm internal / 8mm external
- 6mm internal / 10mm external
Note: product and colour may vary from photo shown.
High quality beer dispensing parts like this one are made of stainless steel to ensure that the taste of your beer is not compromised.
Material: stainless steel 304
From: Krome Dispense
This new EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.
Outer Barrier
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.
Inner Barrier
The inner barrier is made from a proprietary polymer that provides an excellent gas barrier. The significantly better barrier properties means your beer is better protected from oxygen and also has a better barrier to CO2 loss. So your beer will stay fresher for longer and not loose carbonation like other beer line types. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.
Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.
The amount of beer line required to achieve a balanced system and avoid a glass full of foam depends on a number of different variables. Here is a link to a calculator that will help you determine the amount of line required to help you pour foam free beer.
Price is per metre - order as many metres as required
Dimensions/Options:4mm internal (8mm external)
5mm internal (8mm external)
6.3mm internal (9.5mm external)
Pressure Rating (with 1.5 safety factor):
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)
From: Kegland
A 12m roll of EVABarrier line.
Looking to purchase by the meter, then you'll find it here.
This new EVA Double walled tubing is made with an EVA outer wall and also an inner proprietary polymer barrier.
Outer Barrier
The outer barrier has accurately extruded tolerances and made from an EVA material. It also seals well when used with various DuoTight, John Guest or other push in fittings. The outer barrier gives the tubing excellent kink resistance so the line is able to bend around a tight radius without kinking.
Inner Barrier
The inner barrier is made from a proprietary polymer that provides an excellent gas barrier. The significantly better barrier properties means your beer is better protected from oxygen and also has a better barrier to CO2 loss. So your beer will stay fresher for longer and not loose carbonation like other beer line types. In some beer line types you may notice that the beer sitting in the lines starts to taste flat and/or oxidised when sitting in the lines for an extended period. EVABarrier tubing is better in this regard and you will notice a significantly improved freshness of your beer especially if it's been sitting in the lines.
Due to the high density and smooth nature of the EVABarrier inner barrier the tubing internal surface is super smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing.
Dimensions/Options:
4mm internal (8mm external)
5mm internal (8mm external)
Pressure Rating (with 1.5 safety factor):
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)
Length: 12m
From: Kegland
This pack contains a balance of malt, hops and sugars to emulate the particular style of beer. Add this to a regular beer pack. It only takes a few extra minutes. Use in place of dextrose or sugar to produce a fuller bodied, fuller flavoured beer.
This pack contains a balance of malt, hops and sugars to emulate the particular style of beer. Add this to a regular beer pack. It only takes a few extra minutes. Use in place of dextrose or sugar to produce a fuller bodied, fuller flavoured beer.
This mini draft tapping head will turn your growler into a portable keg system.
The growler is purchase separately and can be purchased at this link: Ultimate Vacuum Insulated Growler
This convenient growler tapping head is the best way to keep your precious beer fresh and carbonated in the beer. The pressure applied by CO2 will keep your beer away from damaging oxygen and keep the beer carbonated for ages.
The vacuum walled growler will also keep the beer cold for ages meaning you don't even need a chilly bin or cooler box.
This system doesn't include the regulator, growler or co2 bulbs. These can be purchased separately.
Convenient hand-held beer dispensing gun for pouring stouts or nitro beers.
The beer gun has a long narrow nozzle with a restrictor. This helps mixing nitrogen into the beer well and results in a silky pour.
- Stainless steel 304 grade construction.
- Single handle press and release easy action pouring.
- Narrow spout mixes nitrogen with the beer well. Gives the silky texture to the drink.
- Black convenient grip handle.
From: Krome Dispense
Duotight Bottle Filler Beer Gun - Gen2
Have a keg of beer, but want to fill some bottles to take with you to the game, beach, or friend's house? This beer gun is a great way to fill bottles from a keg. Every part that comes into contact with your beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling.
Now with duotight fittings as standard making the set up and pack away process extremely simple and secure.
The features, coupled with a CO2 jacketing tube for bottle purging and ergonomic valve actuators, makes filling bottles faster, intuitive, more accurate, and easier than ever! Because the Bottle Filler Beer Gun doesn't require a pressurising stopper, you can fill a bottle of any depth without buying different stem lengths or adding plastic hose extensions.
Includes:
1 x Bottle Filler Beer Gun Unit with gas and liquid trigger with silicone tip. Replacement Tips can be found here.
1 x 1/4" x 6.35mm duotight fitting
1 x Red Gas Carbonation Cap x 6.35mm Male Duotight fitting (Connect your gas ball lock line directly to the unit, no longer a permanent fitting!)
1 x 1.5-2m Length of 4mm x 8mm EVABarrier Hosing
1 x 8mm Compression x 8mm female duotight fitting elbow
1 x 8mm Duotight x yellow/black liquid ball lock disconnect
Please use the photos above as your instruction manual on how to assemble.
We also have the non-Duotight Beer Gun Bottle Filler.
From: Kegland
Replacement rubber tip for the Kegland Beer Gun Bottle Filler. Sold individually.
From: Kegland
8mm OD Beer Line Tidy (BLT) - Beer and Gas Line Organiser.
This beer line tidy is a handle little part that will help you organise your beer and gas line inside your fridge, keezer, kegerator or cellar. Designed to suit 8mm outer diameter hosing like the 4mm x 8mm EVABarrier and 5mm x 8mm EVABarrier hosing.
Simply remove the paper and use the strong 3M adhesive to attach this beer/gas line organiser to whatever device you like.
This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works.
From: Kegland
From: Krome Dispense
Bronco / Picnic Party Taps are an inexpensive way to pour beer and great for portable light weight systems that you can take away with you.
Now even better with the addition of duotights. No more hose clamps or stretching hose over barbs! It also makes it easy to disconnect and balance hosing if required.
Looking for the barbed picnic tap? You'll find it here.
From: Kegland
An excellent and economical way to be able to dispense beer from a keg when it isn't connected to your main kegging system.
This simple to use plastic beer tap has a 6mm barb which will ideally suit 5mm ID beer line
This Tap to Keg Adapter and Coupling Nut will allow you to add a beer dispensing tap directly to your keg. Includes both adapter and faucet coupling nut.
Requires an MFL keg connector and beer tap, not included.
- The 27mm nut to attach the tap to your font
- The ring collar that tightens the faucet to the tap shank
- The type 30 nut to attach your regulator to your CO2 bottle
- The FFL fitting to go onto an MFL connection
- A bottle opener
This handy tool is exactly what you need to fit numerous dispensing applications.
This new 7 in 1 tool is also suitable for duotight fittings so it's been improved since the older 5 in 1 tools.
Use it for these tasks:
- Nut behind your taps (27mm Spanner)
- Ring collar connecting your tap to the shank
- Attaching your type 30 Regulator to your CO2 Bottle
- FFL fitting to tighten/undo an MFL connection. (e.g. Barbed fitting on CO2 Regulator)
- The handy dandy bottle opener
- Remove 8mm tubing from duotight fittings
- Remove 9.5mm tubing from duotight fittings
From: Kegland
A standard plastic handle with a threaded brass insert that fits most beer taps.
A chrome plated brass handle for beer taps. Fits most faucets.
From: Krome Dispense
A European-style plastic handle for beer taps. Fits most faucets.
NukaTap Black Plastic Tap Handle - Long Slender Type.
Need something to grab onto to pull a beer out of your new bright and shiny new NukaTap tap? Then it sounds like you need the stock standard black plastic tap handle.
Length: 66.6mm
From: Kegland
Looking for a similar handle but with a threaded brass insert? Try this one.
A Hygiene Plug for beer faucets to help keep beer taps clean. Protects taps from fruit flies and contamination when not in use. Eliminates the time and waste of wrapping beer taps overnight.
Fits most types of beer taps. Do not completely plug Intertap/Nukatap taps.
Note: colour may vary.
From: Krome Dispense
These unique silicone faucet plugs are a universal size so they suit any tap faucet of a diameter 10mm up to 17mm. Perfect for Nukatap and Intertap taps.
The plug is an economical solution for controlling fruit flies, yeast, and bacteria bulidup when the faucet is not in use.
The silicone compound is resistant to caustic and acid-based cleaners as well as high temperature so it is dishwasher safe.
This item also has a dual-use with the BrewZilla Overflow pipe seal for filling the malt pipe with your grain bill.
Features:
- Food grade silicone
- Fits all Nukatap taps, pluto guns, fermenter taps, and many other tap designs
Note: only available in black. Nukatap tap not included.
A beer tap plug to cover the end of the faucet - for controlling fruit flies, yeast and bacteria buildup when not in use.
Our standard bench capper provides an easy way to cap your beer bottles.
It is made from steel and with rubber grip pad so your bottles don't slip off the platform
This bottle capper can be used on different size bottles as the height of the bell can be adjusted, and it can be bolted to sturdy surface.
Features:
- Easy to use and adjust to required heights depending on bottle size
- Comes with a standard bell which has a built in magnet to hold the bottle cap
- Simply place bottle caps in the bell then place the bottle underneath and pull the handle down
The capper is shipped flat-packed and needs assembling before use.
From: Kegland
Reliable, dependable, height adjustable, and easy to use, the Superautomatica Bench Bottle Capper is a top of range bottle capper. Easy to mount on a stable surface it bottles regular crown seals bottles with ease. You can also remove and replace the bell with the larger Tirage Bell (29/31mm).
This product is of high quality and made in Italy.
FEATURES:
-
Easy to use and height adjustable to virtually any bottle size
-
This model comes with a standard bell which has a built in magnet to hold the bottle cap
-
Place bottle caps in the bell then place the bottle underneath and pull the handle down
-
Spring-mounted capping mechanism
-
Long handle and easy downward pressure application on bottles for safe bottling
