Sort by:
The Pure Distilling Alembic Dome is made from 99.7% copper and is double the weight of competitors! The dome fits on top of your boiler, used in place of the boiler lid.
The Pure Distilling Alembic Dome increases copper contact in the distilling process, capturing more sulphites and resulting in a higher quality product. The dome is designed for use with the Pot Condenser and perfect for pairing with our Proofing Parrot!
Fit boilers with a 310mm-312mm diameter.
The diameter of the hole at the top of the dome is 60mm.
Enhance the Taste and Purity of Your Spirits:
Elevate the flavour and quality of your distilled spirits with the Pure Distilling carbon filter cartridge, designed to make your spirits taste better and purer.
The cartridge is specifically designed to improve the taste and purity of your spirits, ensuring that every batch you produce is of the highest quality.
- Designed to use with the Pure Distilling Filter Spindle Kit.
- Fits the EZ Filter.
- Specifically designed to improve the taste and purity of spirits.
- Contains DOUBLE THE CARBON of other units for the best possible performance.
- Box contains one single use cartridge for filtering 10L of 40% spirit.
Pure Distilling's Premium Spirit Yeast is a very high quality 8kg Turbo yeast (or 9 kg of Dextrose) that is fast and reliable. Produces a very high yield (up to 10L of spirit) with an extremely clean, smooth flavour.
For a faster result or if the room temperature is higher than 30C, use 6kg sugar or 7kg dextrose and leave for 3 days.
A bundle including Yeast, Activated Carbon and Flocculating agent to produce 25 litres of high yield spirit wash. Buy as a complete bundle and save!
Pure Distilling's Premium Spirit Yeast is a very high quality 8kg Turbo yeast that is fast and reliable. Produces a very high yield (up to 10L of spirit) with an extremely clean, smooth flavour
Steps:
1. Clean and sterilise all equipment
2. Prepare 21 L of water at 30C
3. Add 8kg of sugar or 9 kg of Dextrose
4. Stir until dissolved
5. Add Pure Distilling Spirit Enhancer
6. Add Pure Distilling Premium Spirit Yeast and stir again
7. Replace lid and leave for 10 days
8.Measure with a hydrometer
9. If higher than 990, then stir and check again in 2 days. If at at 990 or below, use Pure Distilling Crystal Clear and then distill It can make 10L of high quality Spirit.
For a faster result or if the room temperature is higher than 30C, use 6kg sugar or 7kg dextrose and leave for 3 days.
Spirit Enhancer Liquid Activated Carbon 200g
A special activated carbon that removes impurities as your wash is fermenting. Gives a cleaner tasting, smoother spirit. If you want the premium, smooth taste of master distilled spirits, add Spirit Enhancer to your wash and be amazed at the difference it makes.
Crystal Clear Spirit Wash Clarifier Part A & B
Pure Distilling Crystal Clear wash clarifier removes the yeast cells and other impurities from a fully fermented wash to prevent them contaminating your spirit while distilling.
You should always use a clearing agent. This is the single biggest difference you can make to get a far better product. 66g twin pack.
INCLUDES:
- Pure Distilling Premium Spirit Yeast
- Pure Distilling Crystal Clear
- Pure Distilling Spirit Enhancer
The Proofing Parrot Kit is all copper construction with a water cooling coil which brings the output spirit temperature to around 20 degrees, allowing for continuous alchometer readings without having to do corrections. Comes with hoses and connectors and a “perch” to mount the Proofing Parrot Kit onto the boiler. If using an extension or Sightglass mount the perch so it rises or sits up from the boiler, if using just the pot or reflux condenser mount the perch the other way round so it follows the line of the boiler lid, see the photos for examples.
Connect water to the Parrot first, then use the supplied hose and fittings to connect to the pot or reflux condenser. Only insert the alcometer once Parrot is full of spirit, and flowing out the spout.
Introducing the Pure Distilling Liquid Management Reflux Condenser
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
With its easy to use operation, amazing features, and rock-solid reliability, the Reflux Condenser is the foundation of Pure Distilling. Whether you’re assembling the whole unit in under a minute, or watching your bottles fill with commercially quality alcohol – it is simple, easy and fun to use.
Effortless Operation
From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you. All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
Set the water flow once, and simply check ONE thermometer to see when the process is complete.
Add the Pure Distilling Lid to attached the Pure Distilling Reflux Condenser to any boiler with a diameter of 310mm-312mm (such as the T500 boiler).
Amazing Features
93% alcohol and 97% yield
Fast — Makes 13 bottles in about 4 hours.
Pure — Delivers great tasting 93% alcohol with smooth flavour.
Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.
Fits a lid with a 60cm diameter hole.
Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.
The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.
Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.
5 Year Warranty
Problems? No problem! If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty? Simply put – quality. We use only solid copper and brass, have no breakable plastic parts, and an elegant design.
Australian Owned and Manufactured
All our condensers are 100% Australian made, and our company is 100% Australian owned.
Warning
Do not do a vinegar run with the Reflux Condenser as it could damage the seals.
Instructions: The Pure Distilling Reflux Condenser Instructions
Introducing the Pure Distilling Reflux Kit with Liquid Management Reflux Condenser
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
With its easy to use operation, amazing features, and rock-solid reliability, the Reflux Condenser is the foundation of Pure Distilling. Whether you’re assembling the whole unit in under a minute, or watching your bottles fill with commercially quality alcohol – it is simple, easy and fun to use.
Effortless Operation
From the moment you remove the Reflux Condenser from the box, you will realise how easy everything is. That’s because we have done all the complicated stuff for you. All units are fully assembled in our factory, then robotically tested to ensure you get the quality and yield you are expecting first time, every time.
A liquid management reflux condenser is not influenced by changes in temperature of the cooling water, nor is it impacted by water pressure. Liquid management technology doesn’t care. It simply delivers the same product quality over and over.
Set the water flow once, and simply check ONE thermometer to see when the process is complete.
Amazing Features
93% alcohol and 97% yield
Fast — Makes 13 bottles in about 4 hours.
Pure — Delivers great tasting 93% alcohol with smooth flavour.
Easy — Works straight out of the box. Automatic temperature control – virtually runs itself.
Fits a lid with a 60cm diameter hole.
Excellent Quality
This is a commercial quality reflux distillation unit. It will produce spirit better than that which you buy at the bottle shop – guaranteed.
The beauty of copper
Not just elegant to look at copper provides a smoother taste by removing strong smelling sulphides. Major distilleries use copper for this reason.
Guaranteed Easy
It is very easy to use, comes with FULL instructions and everything you need to get started.
5 Year Warranty
Problems? No problem! If anything goes wrong in the first 5 years of use (it shouldn’t – they are designed to last a lifetime), we will fix or replace it for you on the spot.
How can we offer such a long warranty? Simply put – quality. We use only solid copper and brass, have no breakable plastic parts, and an elegant design.
Australian Owned and Manufactured
All our condensers are 100% Australian made, and our company is 100% Australian owned.
Includes
- Pure Distilling Reflux Condenser with high yield output tap
- 3 x Plastic Hose Connectors
- 4m of 12,5mm Clear Vinyl Tubing
- Smart Filter with stainless spindle, clever stainless plug and filter cartridge
- Premium Spirit Yeast, Crystal Clear, Spirit Enhancer & Distilling Conditioner
- 30l Boiler, with dual elements (500w & 1700w), stamped volume gauge and automatic reset on the cut-out protection
- 60cm Stirring Paddle
- Distilling Thermometer with Alarm, Hydrometer and Alcometer
- Six Pure Distilling Essences and a 4l Chunk Soaking Pail with 100g samples of Bourbon Barrel Chunks and Whisky Port Barrel Chunks.
This system is the perfect kit to start distilling, we suggest you purchase a plastic fermenter and accessories for making your wash, we do not recommend using the boiler to ferment your wash as it will shorten the life of the boiler.
Instructions: The Pure Distilling Reflux Condenser Instructions
Sourced from barrels that have held Genuine Queensland Rum. These Rum barrel chunks will produce top quality Rum. Batch lots will contribute to product variation.
Directions for Use
Soak 100g per litre of spirit as a general guide and adjust to your personal taste.
- First Soaking: add 2.5 litres of spirit to 500g of Pure Distilling Bourbon Chunks and leave to soak for 6 - 8 days. Drain the spirit from the chunks and filter though a paper filter to remove any particles.
- Second Soaking: add a further 2.3 litres of spirit and soak for 10 - 24 days depending on taste. Drain and filter as per first soaking.
- Third Soaking: add a further 2.3 litres of spirit and soak for 5 - 6 weeks depending on taste. Drain and filter as per first soaking. This third soaking can be improved by adding a Kentucky Bourbon Flavouring.
See the reflux in action with the Pure Distilling Sight Glass
Seamlessly connect our Sight Glass to different distilling systems! Fits directly onto a boiler lid with a 49mm hole.
The Pure Distilling 2″ Sightglass Adaptor kit adds height to your reflux or pot/alembic condenser, allowing you to see the reflux in action whilst simultaneously improving the spirit quality.
The included adapters allow the sight glass to be fitted to systems with 1 1/2 inch fittings such as the T500.
See the reflux in action with the Pure Distilling Sight Glass
The Pure Distilling 2″ Sightglass Adaptor kit adds height to your Pure Distilling reflux or pot/alembic condenser, allowing you to see the reflux in action whilst simultaneously improving the spirit quality.
Features a Brass adaptor to fit straight onto the Pure Distilling boiler lid with 60cm diameter hole.
You can also use the Pure Distilling Sight Glass to adapt the Reflux Gin basket into your Pot condenser for larger batches of Gin!
See the reflux in action with the Pure Distilling Sight Glass
The Pure Distilling 2″ Sightglass Adaptor kit adds height to your Pure Distilling reflux or pot/alembic condenser, allowing you to see the reflux in action whilst simultaneously improving the spirit quality.
Features a high quality copper extension that fits directly onto the Pure Distilling boiler lid with 60cm diameter hole.
You can also use the Pure Distilling Sight Glass to adapt the Reflux Gin basket into your Pot condenser for larger batches of Gin!
The Smart Filter System is designed to simplify the process of diluting & filtering your spirits. Fill up the top bucket with up to 10L of 0-50%ABV spirit and let the Premium Carbon Cartridge work its magic!
Spirits can be collected straight into filter then diluted and filtered all in one go. Just insert the provided stainless plug into top filter collect, then dilute, pull the plug and filter straight away.
Features
- All stainless steel spindle with silicone washers
- Huge 10L capacity
- Easy set up and use
- Double the carbon cartridge size of other filter cartridges for the purest neutral spirit.
Smooth and sweet, the perfect base for your favourite sweet liqueurs.
Simply add 330ml of Sweet Liqueur Base to 630ml of 40% spirit and the required amount flavouring to create top quality liqueurs.
Makes up to 3 litres.
Sourced from Port barrels that will age premium Tasmanian Whisky. These whisky barrel chunks will produce top quality bourbon. Batch lots will contribute to product variation.
Directions for Use
Soak 100g per litre of spirit as a general guide and adjust to your personal taste.
- First Soaking: add 2.5 litres of spirit to 500g of Pure Distilling Bourbon Chunks and leave to soak for 6 - 8 days. Drain the spirit from the chunks and filter though a paper filter to remove any particles.
- Second Soaking: add a further 2.3 litres of spirit and soak for 10 - 24 days depending on taste. Drain and filter as per first soaking.
- Third Soaking: add a further 2.3 litres of spirit and soak for 5 - 6 weeks depending on taste. Drain and filter as per first soaking. This third soaking can be improved by adding a Kentucky Bourbon Flavouring.
Sourced from Sherry barrels that will age premium Tasmanian Whisky. These whisky barrel chunks will produce top quality bourbon. Batch lots will contribute to product variation.
Directions for Use
Soak 100g per litre of spirit as a general guide and adjust to your personal taste.
- First Soaking: add 2.5 litres of spirit to 500g of Pure Distilling Bourbon Chunks and leave to soak for 6 - 8 days. Drain the spirit from the chunks and filter though a paper filter to remove any particles.
- Second Soaking: add a further 2.3 litres of spirit and soak for 10 - 24 days depending on taste. Drain and filter as per first soaking.
- Third Soaking: add a further 2.3 litres of spirit and soak for 5 - 6 weeks depending on taste. Drain and filter as per first soaking. This third soaking can be improved by adding a Kentucky Bourbon Flavouring.
Sourced from Tasmanian Whisky Barrels, these whisky barrel chunks will produce top quality bourbon. Batch lots will contribute to product variation.
Directions for Use
Soak 100g per litre of spirit as a general guide and adjust to your personal taste.
- First Soaking: add 2.5 litres of spirit to 500g of Pure Distilling Bourbon Chunks and leave to soak for 6 - 8 days. Drain the spirit from the chunks and filter though a paper filter to remove any particles.
- Second Soaking: add a further 2.3 litres of spirit and soak for 10 - 24 days depending on taste. Drain and filter as per first soaking.
- Third Soaking: add a further 2.3 litres of spirit and soak for 5 - 6 weeks depending on taste. Drain and filter as per first soaking. This third soaking can be improved by adding a Kentucky Bourbon Flavouring.
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.
Fits 10mm outer diameter tube.
Note: colour may vary.
This Push-Fit Elbow will allow you to join beer or gas line sections on your kegging system.
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
Made of 304 stainless steel, this fitting is resistant to:
- high temperatures
- low temperatures,
- corrosion,
- moisture,
- abrasion
The fixed ring has good elasticity and is resistant to plugging and unplugging with a rubber ring seal to prevent leakage
Material: 304 stainless steel
Sealing ring: ternary fluorine rubber
Material: 304 stainless steel
Thread: 3/8 male thread
Use O/D pipe size: 8mm
Maximum pressure: 40 bar (580 PSI)
Working temperature: -20℃~200℃
This Push-Fit fitting will allow you to connect 10mm OD line to keg couplers or any 5/8" thread.
Note that this is for 10mm diameter line - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
This Push-Fit Joiner will allow you to join beer or gas line sections on your kegging system.
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.
Fits 10mm outer diameter tube.
Note: colour may vary.
Note that this is 10mm diameter in and out - if you're after 8mm, you'll find it here.
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed.
Fits 10mm outer diameter tube.
Note: colour may vary.
This Push-Fit Two-Way Divider will split the gas (or beer) line on your kegging system in two, allowing you to gas two kegs at the same time.
Note that this is 10mm diameter in and out.
They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps or tools. To remove the fitting, simply push in the collet and the hose can be removed. Fits 10mm outer diameter tube.
Note: colour may vary.
